/[cvs]/eggdrop1.9/help/cmds1.help
ViewVC logotype

Annotation of /eggdrop1.9/help/cmds1.help

Parent Directory Parent Directory | Revision Log Revision Log | View Revision Graph Revision Graph


Revision 1.3 - (hide annotations) (download)
Fri Feb 25 22:05:58 2000 UTC (19 years, 3 months ago) by fabian
Branch: MAIN
Changes since 1.2: +5 -2 lines
david's wildbinds patch

1 fabian 1.1 %{help=+bot}%{+t}
2     ### %b+bot%b <bot> <address:botport#[/userport#]> [hostmask]
3     Creates a user record for a new bot with the nickname given.
4     The hostmask table will have one entry, either that specified,
5     a host from a current user with the given nick, or "none",
6     and the bot (b) flag will be set for the user. The internet
7     address field of the user will also be set to the address given.
8     You can use this command and %b'chpass'%b to completely set up a
9     record for a future bot, or you can let the two bots negotiate
10     a password for themselves the first time they link. If the bot
11     has a seperate port for bots and users they should be seperated
12     with a slash (/).
13     %{help=+host}%{+m|m}
14     ### %b+host%b <nickname> <hostmask>
15     Adds a hostmask to a user's record on the bot. The hostmasks
16     are where the bot will identify that user from. Usually you
17     will not need to use this command since a user can add hostmasks
18     to her own record via the %b/MSG IDENT%b command, but it's here if
19     you need it.
20     %{help=+ignore}%{+m}
21     ### %b+ignore%b <hostmask> [comment]
22     Adds a hostmask to the ignore list, with your nickname and an
23     optional comment. An ignore added manually like this becomes
24     "permenent", ie, it will not expire automatically. To make
25     the bot stop ignoring this hostmask, you must eventually use
26     a %b'-ignore'%b command. This command can be used to either ignore
27     users on irc, or to ignore incoming telnet connections.
28    
29     See also: -ignore, ignores
30     %{help=+user}%{+m}
31     ### %b+user%b <nickname> <hostmask>
32     Creates a new user record for the nickname given, with one entry
33     in the hostmask table. The new user record will have no flags
34     (i.e. not be a master, op, friend, etc) and no password.
35     %{help=-bot}%{+t}
36     ### %b-bot%b <bot>
37     Exactly the same as %b'-user'%b, but is included for convenience.
38     It erases a user record.
39    
40     See also: +bot, +user, -user
41     %{help=-host}
42     ### %b-host%b <hostmask>
43     Allows you to remove a host for yourself.
44     %{+m|m}
45     ### %b-host%b <nickname> <hostmask>
46     Removes a hostmask from another user's record on the bot.
47     See also: +host
48     %{-}
49     %{help=-ignore}%{+m}
50     ### %b-ignore%b <hostmask OR number>
51     Removes the ignore from the list of ignores stored on the bot --
52     You may also reference the ignore by the number shown in '.ignores'.
53    
54     See also: +ignore, ignores
55     %{help=-user}%{+m}
56     ### %b-user%b <nickname>
57     Erases the user record for the nickname given.
58    
59     See also: +user, +bot, -bot
60     %{help=addlog}%{+to|o}
61     ### %baddlog%b <text>
62     Writes your comment into the bot's log file. Bot masters can go
63     back later and review the log, and will see your comment (with your
64     handle attached). This is useful for explaining confusing activity.
65     %{help=away}
66     ### %baway%b [away-message]
67     Marks you as "away" on the party line. Your away message will
68     show up in the %b'.who'%b list, and will be displayed to anyone who
69     tries to send you a note. Your notes will be stored, and then
70     displayed to you as soon as you are no longer away. Saying
71     something on the party line will automatically remove your "away"
72     status, or you can type %b'.back'%b or %b'.away'%b by itself.
73     %{help=back}
74     ### %bback%b
75     This marks you un-away on the party line.
76     %{help=banner}%{+t}
77     ### %bbanner%b <text>
78     Displays a message to everyone currently using the bot's party line
79     or file area -- useful for announcing that the bot will go down, etc.
80     %{help=binds}%{+m}
81 fabian 1.3 ### %bbinds%b [type/match]
82 fabian 1.1 Shows the Tcl bindings in effect, in a list similar to this:
83     Command bindings:
84     TYPE FLGS COMMAND HITS BINDING (TCL)
85     msg -|- rose 0 msg_rose
86     msg -|- go 0 msg_go
87     dcc m|- bind 0 cmd_bind
88     pub -|- gross 0 pub_gross
89     The fields should be self-explanatory, except for HITS, which
90     records the number of times that binding has been called.
91     If not, go read the file %b'tcl-commands.doc'%b for help on the
92     Tcl bind command. Note that the builtin commands are now shown.
93     You may also specify a type of binding to show (ie,
94 fabian 1.3 %b'.binds msg'%b) or you can specify a wild card match (ie,
95     %b'.binds *seen*'%b) if you want to narrow the field a bit.
96     The wild card matches will match against the TYPE, COMMAND and
97     BINDING fields.
98 fabian 1.1 ### %bbinds%b [type] %ball%b
99     Displays all the Tcl bindings of every type (or the specified
100     type), including the bindings for built in commands such as:
101     msg - op *msg:op
102     %{help=boot}%{+t}
103     ### %bboot%b <nickname> [reason]
104     ### %bboot%b <nick@bot> [reason]
105     Will kick a user off the party line, and display the reason if you
106     give one. You can attempt to boot someone from another bot (in a
107     botnet), though it may be rejected if that bot does not allow remote
108     boots. You can not boot the bot's owner.
109     %{help=botattr}%{+t}
110     ### %bbotattr%b <nickname> [attributes] [channel]
111     Lets you view and change the attributes (flags) field for a bot.
112     Example:
113     Sets Fred1 +share and -hub.
114     .botattr Fred1 +s-h
115    
116     Whether or not you change any flags, it will show you the bot's
117     attributes afterwards.
118     To get a list of the flags possible, do %b'help whois'%b.
119     %bNOTE:%b This command is NOT used to replace .chattr,
120     it modifies botflags such as +s, +h, +a, +u... bot specific
121     flags only.
122     %bNOTE:%b You can't use this command on bots which are directly
123     linked to your bot at the current moment.
124    
125     See also: whois, chattr
126     %{help=botinfo}%{+t}
127     ### %bbotinfo%b
128     Requests information from every bot currently in the botnet.
129     Each bot should eventually send you one line listing its version
130     and other information.
131     %{help=bots}
132     ### %bbots%b
133     Shows the list of bots currently in the botnet. Example:
134     Bots: cEvin, ruthie, Killa1
135     There is no indication of which bots are directly connected to
136     this one. Use %b'who'%b %{+t}or %b'bottree'%b%{-} for that information.
137     %{help=bottree}%{+t}
138     ### %b[v]bottree%b
139     Shows a tree-format diagram of the bots currently in the botnet.
140     It's just a nice way to get a feel for how the bots are connected
141     physically. if 2 bots are sharing, a + will be indicated, or a ?
142     if nothing is known.
143     Use vbottree if you want to know bot versions as well.
144    
145     See also: bots, botinfo
146     %{help=chaddr}%{+t}
147     ### %bchaddr %b<bot> <address:botport#/userport#>
148     Changes the internet address for a bot. This is the address
149     your bot will try to telnet to in order to create a connection
150     and link up. If the bot has a seperate port for bots and users
151     they should be seperated with a slash (/).
152    
153     See also: link, +bot
154     %{help=chat}
155     ### %bchat off%b
156     ### %bchat <channel # or name>%b
157     Changes your channel on the dcc chat connection. when you first
158     connect to the bot, it places you on channel 0 (the party line).
159     You can move to another channel where basically nobody can see
160     you (except anyone else who decides to join that channel). Valid
161     channel numbers are 1 thru 99999.
162    
163     Some channels may have assigned names if the assoc module is
164     loaded. For those, you can specify the channel by name instead
165     of number if you wish.
166    
167     %b'chat off'%b removes you from any channel at all. You can still
168     use normal bot commands and see the console, but you can't talk
169     to anyone except via %b'.note'%b
170    
171     %b'chat on'%b returns you to the party line (channel 0) if you were
172     elsewhere.
173    
174     ### %bchat%b <*channel# or name>
175     Same as above, but for channels available only to the bot you
176     are on.
177     %{help=chattr}%{+m|m}
178     ### %bchattr%b <nickname> [attributes] [channel]
179     Lets you view and change the attributes (flags) field for a user.
180     For example, to give Lamer the p and f flags:
181     .chattr Lamer +pf
182     Or to remove Denali from the global op list:
183     .chattr Denali -o
184     You may also do any combination of the above:
185     .chattr Fred1 -m+xj-o
186    
187     You can also change the flags for Usagi on a specific channel by
188     supplying the channel after the attributes:
189     .chattr Usagi -m+dk-o #blah
190    
191     Changing global and channel specific flags within the same command
192     line is now possible! Example:
193     .chattr Bill f|o #lamer (global +f, +o #lamer)
194    
195     Whether or not you change any flags, it will show you the user's
196     attributes afterwards.
197    
198     To get a list of the flags possible, do %b'help whois'%b.
199    
200     %bNOTES:%b
201     Only the owner may add or remove the 'n' (owner), 'm' (master)
202     and 't' (botnet master) flags.
203     It is pointless to -n a permanant owner. You must remove the
204     permanant owner in the config file.
205     This command can no longer be used to change bot flags, they
206     are a seprated entity, changeable with the %b'.botattr'%b command.
207     See also: whois
208     %{help=chnick}%{+t}
209     ### %bchnick%b <oldnick> <newnick>
210     Changes the handle/nickname of a user record. For example, to
211     change the nickname of user 'gavroche' to 'jamie', you would
212     type: 'chnick gavroche jamie'
213     %{help=chpass}%{+t}
214     ### %bchpass%b <handle> [newpassword]
215     Changes a user's password on the bot. If you leave off the new
216     password, the user effectively no longer has a password set. A
217     password is needed to get ops, join the party line, and other
218     things (but only required if one is set).
219    
220     %bNOTE:%b In previous versions, setting a password to "nopass" would
221     clear a user's password -- with encrypted passwords, this no
222     longer works!
223     %{help=comment}%{+m}
224     ### %bcomment%b <user> <comment...>
225     Creates or changes the comment field for a user. The comment field
226 fabian 1.2 can only be seen via 'whois' or 'match'. Non-masters cannot see the
227 fabian 1.1 comment field.
228     %{help=console}%{+to|o}
229     ### %bconsole%b [channel] [modes]
230     Changes your console level, so that you will see only those types
231     of console messages that you want to. Your current console channel
232     is the channel (that the bot is on) which you can view from the
233     party line, and which channel-specific commands (like 'say' and
234     'op') take affect on. valid levels are:
235     m display private msgs/ctcps to the bot
236     p display public talk and ctcps on the channel
237     k display kicks/bans/mode changes on the channel
238     j display joins/parts/nick changes/signoffs/etc on the channel
239     b display bot links/unlinks/userfile-sharing
240     s display server messages and connect/disconnects
241     w display msgs between IRCops (wallops)
242     %{+m|m}
243     channel master only:
244     c display user commands (dcc and msg)
245     o display other bot notices [HIGHLY RECOMMENDED]
246     %{+m}
247     master only:
248     x display file transfers and file-area commands
249     d display debug messages that only coders would care about
250     %{+n}
251     owner only:
252     r display all raw text from the server (if enabled)
253     v display raw text SENT to the server (if enabled)
254     -- There are also 8 user-defined console modes '1' thru '8' --
255     %{+o|o}
256     The mode can also be a modifier like '+p' or '-jk' or '+mp-b'. If
257     you omit the channel and modes, it will show your current console
258     channel and setting.
259     %{+m|m}
260     ### %bconsole%b <user> [channel] [modes]
261     Is used to set the console level of another user. This can even
262     be used on users who normally would not be able to set their own
263     console mode.
264     %{help=dccstat}%{+m}
265     ### %bdccstat%b
266     displays a table-format list of all the "dcc" connections the bot
267     is handling. "dcc" means "direct client-to-client communication"
268     and eggdrop expands this to cover every open socket. so any type
269     of network connection to the bot is considered a "dcc" connection.
270     the headings of the table are:
271     SOCK the socket of this connection (always unique)
272     ADDR the IP-number of the host the connection is to, if
273     applicable
274     PORT the port number being used for communication
275     NICK the nickname of the user or bot, if it's a user or bot
276     HOST sometimes, the hostname corresponding to the IP address
277     TYPE the type of dcc connection (see below)
278    
279     the types of connection currently possible are as follows (but
280     more are being added literally all the time):
281     chat user in dcc-chat command mode
282     pass user entering dcc chat (being asked for her password)
283     send raw data connection: user sending a file
284     get raw data connection: sending a file to a user
285     getp pending get (waiting for the user to acknowledge)
286     lstn telnet listening port (in place of a hostname, it will
287     show the proc to call, or mask of acceptable nicks)
288     t-in incoming telnet user (being asked for his nickname)
289     file user in dcc-chat file area
290     bot bot linked in (aka botnet connection)
291     bot* pending bot link (waiting for acknowledgement)
292     rela user in relay connection to another bot
293     >rly bot being relay'd to (one for each "rela")
294     conn pending telnet connection (chat, relay, bot-link, etc)
295     new new user via telnet, entering a handle
296     newp new user via telnet, entering a password
297    
298     in addition, 'chat' and 'bot' have flags listed for each con-
299     nection. capital letters mean the flag is on, and lowercase
300     letters mean the flag is off. for 'chat', the flags are:
301     C in file area, but allowed to return to party line
302     P party line access only (no +o access)
303     T telnet connection (instead of dcc chat)
304     E echo is on
305     P use is paging
306     for 'bot', the flags are:
307     P ping sent, waiting for reply
308     U user-file sharing is active
309     C this bot initiated the connection
310     O user-file offered, waiting for reply
311     S in the process of sending the user-file
312     G in the process of getting the user-file
313     W warned this bot to stop hubbing
314     L leafed bot (not allowed to hub)
315     I bot is currently in the 'linking' stage
316     A bot is being agressively shared with
317     for 'chat' users, the party-line channel is also listed.
318     %{help=debug}%{+m}
319     ### %bdebug%b
320     will display a dump of memory allocation, assuming the bot was
321     compiled with DEBUG defined. it's useless to anyone but program-
322     mers hacking on the bot and trying to find memory leaks.
323     %{help=echo}
324     ### %becho%b <on/off>
325     sets whether you want your messages echoed back to you. if it's
326     on, then when you say something on the party line, it will be
327     displayed to you just like everyone else will see it. if it's off,
328     then that won't happen.
329     %{help=die}%{+n}
330     ### %bdie%b [reason]
331     kills the bot. the bot goes offline immediately, logging who gave
332     the 'die' command. you shouldn't have to use this too often. if you
333     specify a reason, it's logged, otherwise the reason is "authorized by
334     <nickname>".

webmaster@eggheads.org
ViewVC Help
Powered by ViewVC 1.1.23