/[cvs]/eggdrop1.8/eggdrop.conf
ViewVC logotype

Contents of /eggdrop1.8/eggdrop.conf

Parent Directory Parent Directory | Revision Log Revision Log | View Revision Graph Revision Graph


Revision 1.11 - (show annotations) (download)
Fri Feb 11 16:08:38 2011 UTC (8 years, 1 month ago) by pseudo
Branch: MAIN
Changes since 1.10: +3 -3 lines
Fixed statuslog documentation.

1 #! /path/to/executable/eggdrop
2 # ^- This should contain a fully qualified path to your Eggdrop executable.
3 #
4 # $Id: eggdrop.conf,v 1.10 2010/11/01 22:38:32 pseudo Exp $
5 #
6 # This is a sample Eggdrop configuration file which includes all possible
7 # settings that can be used to configure your bot.
8 #
9 # The pound signs (#) that you see at the beginning of some lines mean that
10 # the remainder of that line is a comment, or just for your information. By
11 # adding or deleting pound signs, you can comment or uncomment a setting,
12 # respectively.
13 #
14 # Arguments for a command or setting may be inclosed in <>'s or []'s in the
15 # example/description. Arguments in <>'s are required, while [] means optional.
16 #
17 # More detailed descriptions of all these settings can be found in
18 # doc/settings/.
19
20
21
22 ##### BASIC SETTINGS #####
23
24 # This setting defines the username the bot uses on IRC. This setting has
25 # no effect if an ident daemon is running on your bot's machine.
26 set username "lamest"
27
28 # This setting defines which contact person should be shown in .status,
29 # /msg help, and other places. You really should include this information.
30 set admin "Lamer <email: lamer@lamest.lame.org>"
31
32 # This setting is used only for info to share with others on your botnet.
33 # Set this to the IRC network your bot is connected to.
34 set network "I.didn't.edit.my.config.file.net"
35
36 # This setting defines which timezone is your bot in. It's used for internal
37 # routines as well as for logfile timestamping and scripting purposes.
38 # The timezone string specifies the name of the timezone and must be three
39 # or more alphabetic characters. For example, Central European Time(UTC+1)
40 # should be "CET".
41 set timezone "EST"
42
43 # The offset setting specifies the time value to be added to the local
44 # time to get Coordinated Universal Time (UTC aka GMT). The offset is
45 # positive if the local timezone is west of the Prime Meridian and
46 # negative if it is east. The value (in hours) must be between -23 and
47 # 23. For example, if the timezone is UTC+1, the offset is -1.
48 set offset "5"
49
50 # If you don't want to use the timezone setting for scripting purposes only,
51 # but instead everywhere possible, un-comment the following line.
52 #set env(TZ) "$timezone$offset"
53
54 # If you're using virtual hosting (your machine has more than 1 IP), you
55 # may want to specify the particular IP to bind to. You can specify either
56 # by hostname or by IP. Note that this is not used for listening. Use the
57 # 'listen-addr' variable to specify the listening address.
58 #set vhost4 "virtual.host.com"
59 #set vhost4 "99.99.0.0"
60
61 # IPv6 vhost to bind to for outgoing IPv6 connections. You can set it
62 # to any valid IPv6 address or hostname, resolving to an IPv6 address.
63 # Note that this is not used for listening. Use the 'listen-addr'
64 # variable to specify the listening address.
65 #set vhost6 "my.ipv6.host.com"
66 #set vhost6 "2001:db8::c001:b07"
67
68 # IPv4/IPv6 address (or hostname) to bind for listening. If you don't set
69 # this variable, eggdrop will listen on all available IPv4 or IPv6 interfaces,
70 # depending on the 'prefer-ipv6' variable (see below).
71 # Note that eggdrop will accept IPv4 connections with IPv6 sockets too.
72 #set listen-addr "99.99.0.0"
73 #set listen-addr "2001:db8:618:5c0:263::"
74 #set listen-addr "virtual.host.com"
75
76 # Prefer IPv6 over IPv4 for connections and dns resolution?
77 # If the preferred protocol family is not supported, the other one
78 # will be tried.
79 set prefer-ipv6 0
80
81 # If you want to have your Eggdrop messages displayed in a language other
82 # than English, change this setting to match your preference. An alternative
83 # would be to set the environment variable EGG_LANG to that value.
84 #
85 # Languages included with Eggdrop: Danish, English, French, Finnish, German.
86 #addlang "english"
87
88
89 ##### LOG FILES #####
90
91 # Eggdrop is capable of logging various things, from channel chatter to
92 # commands people use on the bot and file transfers. Logfiles are normally
93 # kept for 24 hours. Afterwards, they will be renamed to "(logfile).yesterday".
94 # After 48 hours, they will be overwritten by the logfile of the next day.
95 #
96 # Events are logged by certain categories. This way, you can specify
97 # exactly what kind of events you want sent to various logfiles.
98 #
99 # Logfile flags:
100 # b - information about bot linking and userfile sharing
101 # c - commands
102 # d - misc debug information
103 # h - raw share traffic
104 # j - joins, parts, quits, and netsplits on the channel
105 # k - kicks, bans, and mode changes on the channel
106 # m - private msgs, notices and ctcps to the bot
107 # o - misc info, errors, etc (IMPORTANT STUFF)
108 # p - public text on the channel
109 # r - raw incoming server traffic
110 # s - server connects, disconnects, and notices
111 # t - raw botnet traffic
112 # v - raw outgoing server traffic
113 # w - wallops (make sure the bot sets +w in init-server)
114 # x - file transfers and file-area commands
115 #
116 # Note that modes d, h, r, t, and v can fill disk quotas quickly. There are
117 # also eight user-defined levels (1-8) which can be used by Tcl scripts.
118 #
119 # Each logfile belongs to a certain channel. Events of type 'k', 'j', and 'p'
120 # are logged to whatever channel they happened on. Most other events are
121 # currently logged to every channel. You can make a logfile belong to all
122 # channels by assigning it to channel "*".
123
124 # This is the maximum number of logfiles allowed. This setting can be
125 # increased; however, don't decrease it.
126 set max-logs 5
127
128 # This is the maximum size of your logfiles. Set it to 0 to disable.
129 # This value is in kilobytes, so '550' would mean cycle logs when it
130 # reaches the size of 550 kilobytes. Note that this only works if you
131 # have keep-all-logs 0 (OFF).
132 set max-logsize 0
133
134 # This could be good if you have had problem with the logfile filling
135 # your quota/hard disk or if you log +p and publish it to the web and
136 # need more up-to-date info. Note that this setting might increase the
137 # CPU usage of your bot (on the other hand it will decrease your mem usage).
138 set quick-logs 0
139
140 # This setting allows you the logging of raw incoming server traffic via
141 # console/log flag 'r', raw outgoing server traffic via console/log mode 'v',
142 # raw botnet traffic via console/log mode 't', and raw share traffic via
143 # console/log mode 'h'. These flags can create a large security hole,
144 # allowing people to see user passwords. This is now restricted to +n users
145 # only. Please choose your owners with care.
146 set raw-log 0
147
148 # This creates a logfile named eggdrop.log containing private msgs/ctcps,
149 # commands, errors, and misc. info from any channel.
150 logfile mco * "logs/eggdrop.log"
151
152 # This creates a logfile named lamest.log containing joins, parts,
153 # netsplits, kicks, bans, mode changes, and public chat on the
154 # channel #lamest.
155 #logfile jpk #lamest "logs/lamest.log"
156
157 # Use this feature to timestamp entries in the log file.
158 set log-time 1
159
160 # Set the following to the timestamp for the logfile entries. Popular times
161 # might be "[%H:%M]" (hour, min), or "[%H:%M:%S]" (hour, min, sec).
162 # Read `man strftime' for more formatting options. Keep it below 32 chars.
163 set timestamp-format {[%H:%M:%S]}
164
165 # If you want to keep your logfiles forever, turn this setting on. All
166 # logfiles will get suffix ".[day, 2 digits][month, 3 letters][year, 4 digits]".
167 # Note that your quota/hard-disk might be filled by this, so check your
168 # logfiles often and download them.
169 set keep-all-logs 0
170
171 # If keep-all-logs is 1, this setting will define the suffix of the logfiles.
172 # The default will result in a suffix like "04May2000". "%Y%m%d" will produce
173 # the often used yyyymmdd format. Read the strftime manpages for more options.
174 # NOTE: On systems which don't support strftime, the default format will
175 # be used _always_.
176 set logfile-suffix ".%d%b%Y"
177
178 # You can specify when Eggdrop should switch logfiles and start fresh. You
179 # must use military time for this setting. 300 is the default, and describes
180 # 03:00 (AM).
181 set switch-logfiles-at 300
182
183 # "Writing user file..." and "Writing channel file..." messages won't be logged
184 # anymore if this option is enabled. If you set it to 2, the "Backing up user
185 # file..." and "Backing up channel file..." messages will also not be logged.
186 # In addition to this, you can disable the "Switching logfiles..." and the new
187 # date message at midnight, by setting this to 3.
188 set quiet-save 0
189
190
191 ##### CONSOLE #####
192
193 # This is the default console mode. It uses the same event flags as the log
194 # files do. The console channel is automatically set to your "primary" channel,
195 # which is set in the modules section of the config file. Masters can change
196 # their console channel and modes with the '.console' command.
197
198 set console "mkcobxs"
199
200
201 ##### FILES AND DIRECTORIES #####
202
203 # Specify here the filename your userfile should be saved as.
204 set userfile "LamestBot.user"
205
206 # Specify here the filename Eggdrop will save its pid to. If no pidfile is
207 # specified, pid.(botnet-nick) will be used.
208 #set pidfile "pid.LamestBot"
209
210 # Specify here where Eggdrop should look for help files. Don't modify this
211 # setting unless you know what you're doing!
212 set help-path "help/"
213
214 # Specify here where Eggdrop should look for text files. This is used for
215 # certain Tcl and DCC commands.
216 set text-path "text/"
217
218 # Set here a place to store temporary files.
219 set temp-path "/tmp"
220
221 # The MOTD (Message Of The day) is displayed when people dcc chat or telnet
222 # to the bot. Look at doc/TEXT-SUBSTITUTIONS for options.
223 set motd "text/motd"
224
225 # This banner will be displayed on telnet connections. Look at
226 # doc/TEXT-SUBSTITUTIONS for options.
227 set telnet-banner "text/banner"
228
229 # This specifies what permissions the user, channel, and notes files should
230 # be set to. The octal values are the same as for the chmod system command.
231 #
232 # To remind you:
233 #
234 # u g o u g o u g o
235 # 0600 rw------- 0400 r-------- 0200 -w------- u - user
236 # 0660 rw-rw---- 0440 r--r----- 0220 -w--w---- g - group
237 # 0666 rw-rw-rw- 0444 r--r--r-- 0222 -w--w--w- o - others
238 #
239 # Note that the default 0600 is the most secure one and should only be changed
240 # if you need your files for shell scripting or other external applications.
241 set userfile-perm 0600
242
243
244 ##### BOTNET/DCC/TELNET #####
245
246 # Settings in this section should be unimportant for you until you deal
247 # with botnets (multiple Eggdrops connected together to maximize efficiency).
248 # You should read doc/BOTNET before modifying these settings.
249
250 # If you want to use a different nickname on the botnet than you use on
251 # IRC (i.e. if you're on an un-trusted botnet), un-comment the next line
252 # and set it to the nick you would like to use.
253 #set botnet-nick "LlamaBot"
254
255 # This opens a telnet port by which you and other bots can interact with the
256 # Eggdrop by telneting in.
257 #
258 # There are more options for the listen command in doc/tcl-commands.doc. Note
259 # that if you are running more than one bot on the same machine, you will want
260 # to space the telnet ports at LEAST 5 apart, although 10 is even better.
261 #
262 # Valid ports are typically anything between 1025 and 65535 assuming the
263 # port is not already in use.
264 #
265 # If you would like the bot to listen for users and bots in separate ports,
266 # use the following format:
267 #
268 # listen 3333 bots
269 # listen 4444 users
270 #
271 # If you wish to use only one port, use this format:
272 #
273 # listen 3333 all
274 #
275 # You can setup a SSL port by prepending a plus sign to it:
276 #
277 # listen +5555 all
278 #
279 # You need to un-comment this line and change the port number in order to open
280 # the listen port. You should not keep this set to 3333.
281 #listen 3333 all
282
283 # This setting defines whether or not people can boot users on the Eggdrop
284 # from other bots in your botnet. Valid settings are:
285 # 0 - allow *no* outside boots
286 # 1 - allow boots from sharebots
287 # 2 - allow any boots
288 set remote-boots 2
289
290 # This setting prohibits remote bots from telling your Eggdrop to unlink from
291 # share bots.
292 set share-unlinks 1
293
294 # This setting will drop telnet connections not matching a known host.
295 set protect-telnet 0
296
297 # This setting will make the bot ignore DCC chat requests which appear to
298 # have bogus information on the grounds that the user may have been trying
299 # to make the bot connect to somewhere that will get it into trouble, or
300 # that the user has a broken client, in which case the connect wouldn't work
301 # anyway.
302 set dcc-sanitycheck 0
303
304 # This setting defines the time in seconds the bot should wait for ident reply
305 # before the lookup fails. The default ident on timeout is 'telnet'.
306 set ident-timeout 5
307
308 # Define here whether or not a +o user still needs the +p flag to dcc the bot.
309 set require-p 1
310
311 # If you want people allow to telnet in and type 'NEW' to become a new user,
312 # set this to 1. This is similar to the 'hello' msg command. The protect-telnet
313 # setting must be set to 0 to use this.
314 set open-telnets 0
315
316 # If you don't want Eggdrop to identify itself as an eggdrop on a telnet
317 # connection, set this setting to 1. Eggdrop will display 'Nickname' instead.
318 set stealth-telnets 0
319
320 # If you want Eggdrop to display a banner when telneting in, set this setting
321 # to 1. The telnet banner is set by 'set telnet-banner'.
322 set use-telnet-banner 0
323
324 # This setting defines a time in seconds that the bot should wait before
325 # a dcc chat, telnet, or relay connection times out.
326 set connect-timeout 15
327
328 # Specify here the number of lines to accept from a user on the partyline
329 # within 1 second before they are considered to be flooding and therefore
330 # get booted.
331 set dcc-flood-thr 3
332
333 # Define here how many telnet connection attempts in how many seconds from
334 # the same host constitute a flood. The correct format is Attempts:Seconds.
335 set telnet-flood 5:60
336
337 # If you want telnet-flood to apply even to +f users, set this setting to 1.
338 set paranoid-telnet-flood 1
339
340 # Set here the amount of seconds before giving up on hostname/address
341 # lookup (you might want to increase this if you are on a slow network).
342 set resolve-timeout 7
343
344
345 ##### SSL SETTINGS #####
346
347 # Settings in this section take effect when eggdrop is compiled with TLS
348 # support.
349
350 # File containing your private key, needed for the SSL certificate
351 # (see below). You can create one issuing the following command:
352 #
353 # openssl genrsa -out eggdrop.key 2048
354 #
355 # It will create a 2048 bit RSA key, strong enough for eggdrop.
356 # This is required for SSL hubs/listen ports, secure file transfer and
357 # /ctcp botnick schat
358 # For your convenience, you can type 'make sslcert' after 'make install'
359 # and you'll get a key and a certificate in your DEST directory.
360 #set ssl-privatekey "eggdrop.key"
361
362 # Specify the filename where your SSL certificate is located. If you
363 # don't set this, eggdrop will not be able to act as a server in SSL
364 # connections, as with most ciphers a certificate and a private key
365 # are required on the server side. Must be in PEM format.
366 # If you don't have one, you can create it using the following command:
367 #
368 # openssl req -new -key eggdrop.key -x509 -out eggdrop.crt -days 365
369 #
370 # This is required for SSL hubs/listen ports, secure file transfer and
371 # /ctcp botnick schat
372 # For your convenience, you can type 'make sslcert' after 'make install'
373 # and you'll get a key and a certificate in your DEST directory.
374 #set ssl-certificate "eggdrop.crt"
375
376 # Sets the maximum depth for the certificate chain verification that will
377 # be allowed for ssl. When certificate verification is enabled, any chain
378 # exceeding this depth will fail verification.
379 #set ssl-verify-depth 9
380
381 # Specify the location at which CA certificates for verification purposes
382 # are located. These certificates are trusted. If you don't set this,
383 # certificate verification will not work.
384 set ssl-capath "/etc/ssl/"
385 #set ssl-cafile ""
386
387 # Specify the list of ciphers (in order of preference) allowed for use with
388 # ssl. The cipher list is one or more cipher strings separated by colons,
389 # commas or spaces. Unavailable ciphers are silently ignored unless no useable
390 # cipher could be found. For the list of possible cipher strings and their
391 # meanings, please refer to the ciphers(1) manual.
392 # Note: if you set this, the value replaces any ciphers OpenSSL might use by
393 # default. To include the default ciphers, you can put DEFAULT as a cipher
394 # string in the list.
395 # For example:
396 #
397 # set ssl-ciphers "DEFAULT ADH"
398 #
399 # This will make eggdrop allow the default OpenSSL selection plus anonymous
400 # DH ciphers.
401 #
402 # set ssl-ciphers "ALL"
403 #
404 # This will make eggdrop allow all ciphers supported by OpenSSL, in a
405 # reasonable order.
406 #set ssl-ciphers ""
407
408 # Enable certificate authorization. Set to 1 to allow users and bots to
409 # identify automatically by their certificate fingerprints. Setting it
410 # to 2 to will force fingerprint logins. With a value of 2, users without
411 # a fingerprint set or with a certificate UID not matching their handle
412 # won't be allowed to login on SSL enabled telnet ports. Fingerprints
413 # must be set in advance with the .fprint and .chfinger commands.
414 # NOTE: this setting has no effect on plain-text ports.
415 #set ssl-cert-auth 0
416
417 # You can control SSL certificate verification using the following variables.
418 # All of them are flag-based. You can set them by adding together the numbers
419 # for all exceptions you want to enable. By default certificate verification
420 # is disabled and all certificates are assumed to be valid. The numbers are
421 # the following:
422 #
423 # Enable certificate verification - 1
424 # Allow self-signed certificates - 2
425 # Don't check peer common or alt names - 4
426 # Allow expired certificates - 8
427 # Allow certificates which are not valid yet - 16
428 # Allow revoked certificates - 32
429 # A value of 0 disables verification.
430
431 # Control certificate verification for DCC chats (only /dcc chat botnick)
432 #set ssl-verify-dcc 0
433
434 # Control certificate verification for linking to hubs
435 #set ssl-verify-bots 0
436
437 # Control cerfificate verification for SSL listening ports. This includes
438 # leaf bots connecting, users telneting in and /ctcp bot chat.
439 #set ssl-verify-clients 0
440
441
442 ##### MORE ADVANCED SETTINGS #####
443
444 # Set this to your socks host if your Eggdrop sits behind a firewall. If
445 # you use a Sun "telnet passthru" firewall, prefix the host with a '!'.
446 #set firewall "!sun-barr.ebay:3666"
447
448 # If you have a NAT firewall (you box has an IP in one of the following
449 # ranges: 192.168.0.0-192.168.255.255, 172.16.0.0-172.31.255.255,
450 # 10.0.0.0-10.255.255.255 and your firewall transparently changes your
451 # address to a unique address for your box) or you have IP masquerading
452 # between you and the rest of the world, and /dcc chat, /ctcp chat or
453 # userfile sharing aren't working, enter your outside IP here. This IP
454 # is used for transfers only, and has nothing to do with the vhost4/6
455 # or listen-addr settings. You may still need to set them.
456 #set nat-ip "127.0.0.1"
457
458 # If you want all dcc file transfers to use a particular portrange either
459 # because you're behind a firewall, or for other security reasons, set it
460 # here.
461 #set reserved-portrange 2010:2020
462
463 # Set the time in minutes that temporary ignores should last.
464 set ignore-time 15
465
466 # Define here what Eggdrop considers 'hourly'. All calls to it, including such
467 # things as note notifying or userfile saving, are affected by this.
468 # For example:
469 #
470 # set hourly-updates 15
471 #
472 # The bot will save its userfile 15 minutes past every hour.
473 set hourly-updates 00
474
475 # Un-comment the next line and set the list of owners of the bot.
476 # You NEED to change this setting.
477 #set owner "MrLame, MrsLame"
478
479 # Who should a note be sent to when new users are learned?
480 set notify-newusers "$owner"
481
482 # Enter the flags that all new users should get by default. See '.help whois'
483 # on the partyline for a list of flags and their descriptions.
484 set default-flags "hp"
485
486 # Enter all user-defined fields that should be displayed in a '.whois'.
487 # This will only be shown if the user has one of these extra fields.
488 # You might prefer to comment this out and use the userinfo1.0.tcl script
489 # which provides commands for changing all of these.
490 set whois-fields "url birthday"
491
492 # Uncomment these two lines if you wish to disable the .tcl and .set commands.
493 # If you select your owners wisely, you should be okay enabling these.
494 #unbind dcc n tcl *dcc:tcl
495 #unbind dcc n set *dcc:set
496
497 # If you enable this setting, only permanent owners (owner setting) will be
498 # able to use .tcl and .set. Moreover, if you want only let permanent owners
499 # use .dump, then set this to 2.
500 # WARNING: setting this to 0 is a security risk, don't do it unless you trust
501 # your owners enough to give them shell access to the account the bot is
502 # running on.
503 set must-be-owner 1
504
505 # Comment out this line to add the 'simul' partyline command (owners can
506 # manipulate other people on the party line). Please select owners wisely
507 # and use this command ethically!
508 unbind dcc n simul *dcc:simul
509
510 # Set here the maximum number of socket connections you will allow. You can
511 # increase this later, but never decrease it below current usage.
512 # If you're using Tcl threads, this is a per-thread maximum.
513 set max-socks 100
514
515 # Enable this setting if you want +d & +k users to use commands bound as -|-.
516 set allow-dk-cmds 1
517
518 # If your Eggdrop rejects bots that actually have already disconnected from
519 # another hub, but the disconnect information has not yet spread over the
520 # botnet due to lag, use this setting. The bot will wait dupwait-timeout
521 # seconds before it checks again and then finally reject the bot.
522 set dupwait-timeout 5
523
524 # Set this to 0 if you want the bot to strip '~+-^=' characters from user@hosts
525 # before matching them.
526 # This setting is currently kept for compatibility, but will be removed from
527 # the next release. Please leave it set to 1 to avoid problems with your user
528 # files in the future.
529 set strict-host 1
530
531 # Enable cidr support for b/e/I modes. This means the bot will understand
532 # and match modes in cidr notation, and will be able to put and enforce such
533 # bans or unban itself, if banned with a cidr mask.
534 # Do NOT set this, if your network/server does not support cidr!
535 set cidr-support 0
536
537 # You MUST remove this line for your bot to start. This has been added to
538 # prevent you from starting up a bot that is not fully configured. Bots
539 # that have not been fully configured may join the wrong IRC network, the
540 # wrong channels, or generally do things that you do not want. Please make
541 # sure that you have double-checked every setting. There's also a similar line
542 # lower down, just to make sure you're reading :)
543 die "Please make sure you edit your config file completely."
544
545
546 ##### MODULES #####
547
548 # Below are various settings for the modules included with Eggdrop.
549 # PLEASE READ AND EDIT THEM CAREFULLY, even if you're an old hand at
550 # Eggdrop, things change.
551
552 # This path specifies the path were Eggdrop should look for its modules.
553 # If you run the bot from the compilation directory, you will want to set
554 # this to "". If you use 'make install' (like all good kiddies do ;), this
555 # is a fine default. Otherwise, use your head :)
556 set mod-path "modules/"
557
558
559 #### BLOWFISH MODULE ####
560
561 # IF YOU DON'T READ THIS YOU MAY RENDER YOUR USERFILE USELESS LATER
562 # Eggdrop encrypts its userfile, so users can have secure passwords.
563 # Please note that when you change your encryption method later (i.e.
564 # using other modules like a md5 module), you can't use your current
565 # userfile anymore. Eggdrop will not start without an encryption module.
566 loadmodule blowfish
567
568
569 #### DNS MODULE ####
570
571 # This module provides asynchronous dns support. This will avoid long
572 # periods where the bot just hangs there, waiting for a hostname to
573 # resolve, which will often let it timeout on all other connections.
574 loadmodule dns
575
576 # In case your bot has trouble finding dns servers or you want to use
577 # specific ones, you can set them here. The value is a list of dns servers.
578 # The order doesn't matter. You can also specify a non-standard port.
579 # The default is to use the system specified dns servers. You don't need to
580 # modify this setting normally.
581 #set dns-servers "8.8.8.8 8.8.4.4"
582
583 # Specify how long should the DNS module cache replies at maximum. The value
584 # must be in seconds.
585 # Note that it will respect the TTL of the reply and this is just an upper
586 # boundary.
587 set dns-cache 86400
588
589 # Specify how long should the DNS module cache negative replies (NXDOMAIN,
590 # DNS Lookup failed). The value must be in seconds.
591 set dns-negcache 600
592
593 # How many times should the DNS module resend the query for a given domain
594 # if it receives no reply?
595 set dns-maxsends 4
596
597 # Specify how long should the DNS module wait for a reply before resending the
598 # query. The value must be in seconds.
599 set dns-retrydelay 3
600
601 #### CHANNELS MODULE ####
602
603 # This module provides channel related support for the bot. Without it,
604 # you won't be able to make the bot join a channel or save channel
605 # specific userfile information.
606 loadmodule channels
607
608 # Enter here the filename where dynamic channel settings are stored.
609 set chanfile "LamestBot.chan"
610
611 # Set this setting to 1 if you want your bot to expire bans/exempts/invites set
612 # by other opped bots on the channel.
613 set force-expire 0
614
615 # Set this setting to 1 if you want your bot to share user greets with other
616 # bots on the channel if sharing user data.
617 set share-greet 0
618
619 # Set this setting to 1 if you want to allow users to store an info line.
620 set use-info 1
621
622 # Set this setting to 1 if you want to allow both +p and +s channel modes
623 # to be enforced at the same time by the chanmode channel setting.
624 # Make sure your server supports +ps mixing or you may get endless mode
625 # floods.
626 set allow-ps 0
627
628 # The following settings are used as default values when you .+chan #chan or .tcl
629 # channel add #chan. Look below for explanation of every option.
630
631 set global-flood-chan 15:60
632 set global-flood-deop 3:10
633 set global-flood-kick 3:10
634 set global-flood-join 5:60
635 set global-flood-ctcp 3:60
636 set global-flood-nick 5:60
637 set global-aop-delay 5:30
638 set global-idle-kick 0
639 set global-chanmode "nt"
640 set global-stopnethack-mode 0
641 set global-revenge-mode 0
642 set global-ban-type 3
643 set global-ban-time 120
644 set global-exempt-time 60
645 set global-invite-time 60
646
647 set global-chanset {
648 -autoop -autovoice
649 -bitch +cycle
650 +dontkickops +dynamicbans
651 +dynamicexempts +dynamicinvites
652 -enforcebans +greet
653 -inactive -nodesynch
654 -protectfriends +protectops
655 -revenge -revengebot
656 -secret -seen
657 +shared -statuslog
658 +userbans +userexempts
659 +userinvites -protecthalfops
660 -autohalfop -static
661 }
662
663 # chanmode +/-<modes>
664 # This setting makes the bot enforce channel modes. It will always add
665 # the +<modes> and remove the -<modes> modes.
666 #
667 # idle-kick 0
668 # This setting will make the bot check every minute for idle
669 # users. Set this to 0 to disable idle check.
670 #
671 # stopnethack-mode 0
672 # This setting will make the bot de-op anyone who enters the channel
673 # with serverops. There are seven different modes for this settings:
674 # 0 turn off
675 # 1 isoptest (allow serverop if registered op)
676 # 2 wasoptest (allow serverop if op before split)
677 # 3 allow serverop if isop or wasop
678 # 4 allow serverop if isop and wasop.
679 # 5 If the channel is -bitch, see stopnethack-mode 3
680 # If the channel is +bitch, see stopnethack-mode 1
681 # 6 If the channel is -bitch, see stopnethack-mode 2
682 # If the channel is +bitch, see stopnethack-mode 4
683 #
684 # revenge-mode 0
685 # This settings defines how the bot should punish bad users when
686 # revenging. There are four possible settings:
687 # 0 Deop the user.
688 # 1 Deop the user and give them the +d flag for the channel.
689 # 2 Deop the user, give them the +d flag for the channel, and kick them.
690 # 3 Deop the user, give them the +d flag for the channel, kick, and ban them.
691 #
692 # ban-type 3
693 # This setting defines what type of bans should eggdrop place for +k users or
694 # when revenge-mode is 3.
695 # Available types are:
696 # 0 *!user@host
697 # 1 *!*user@host
698 # 2 *!*@host
699 # 3 *!*user@*.host
700 # 4 *!*@*.host
701 # 5 nick!user@host
702 # 6 nick!*user@host
703 # 7 nick!*@host
704 # 8 nick!*user@*.host
705 # 9 nick!*@*.host
706 # You can also specify types from 10 to 19 which correspond to types
707 # 0 to 9, but instead of using a * wildcard to replace portions of the
708 # host, only numbers in hostnames are replaced with the '?' wildcard.
709 # Same is valid for types 20-29, but instead of '?', the '*' wildcard
710 # will be used.
711 #
712 # ban-time 120
713 # Set here how long temporary bans will last (in minutes). If you
714 # set this setting to 0, the bot will never remove them.
715 #
716 # exempt-time 60
717 # Set here how long temporary exempts will last (in minutes). If you
718 # set this setting to 0, the bot will never remove them. The bot will
719 # check the exempts every X minutes, but will not remove the exempt if
720 # a ban is set on the channel that matches that exempt. Once the ban is
721 # removed, then the exempt will be removed the next time the bot checks.
722 # Please note that this is an IRCnet feature.
723 #
724 # invite-time 60
725 # Set here how long temporary invites will last (in minutes). If you
726 # set this setting to 0, the bot will never remove them. The bot will
727 # check the invites every X minutes, but will not remove the invite if
728 # a channel is set to +i. Once the channel is -i then the invite will be
729 # removed the next time the bot checks. Please note that this is an IRCnet
730 # feature.
731 #
732 # aop-delay (minimum:maximum)
733 # This is used for autoop, autohalfop, autovoice. If an op or voice joins a
734 # channel while another op or voice is pending, the bot will attempt to put
735 # both modes on one line.
736 # aop-delay 0 No delay is used.
737 # aop-delay X An X second delay is used.
738 # aop-delay X:Y A random delay between X and Y is used.
739 #
740 # need-op { putserv "PRIVMSG #lamest :op me cos i'm lame!" }
741 # This setting will make the bot run the script enclosed in brackets
742 # if it does not have ops. This must be shorter than 120 characters.
743 # If you use scripts like getops.tcl or botnetop.tcl, you don't need
744 # to set this setting.
745 #
746 # need-invite { putserv "PRIVMSG #lamest :let me in!" }
747 # This setting will make the bot run the script enclosed in brackets
748 # if it needs an invite to the channel. This must be shorter than 120
749 # characters. If you use scripts like getops.tcl or botnetop.tcl, you
750 # don't need to set this setting.
751 #
752 # need-key { putserv "PRIVMSG #lamest :let me in!" }
753 # This setting will make the bot run the script enclosed in brackets
754 # if it needs the key to the channel. This must be shorter than 120
755 # characters. If you use scripts like getops.tcl or botnetop.tcl, you
756 # don't need to set this setting
757 #
758 # need-unban { putserv "PRIVMSG #lamest :let me in!" }
759 # This setting will make the bot run the script enclosed in brackets
760 # if it needs to be unbanned on the channel. This must be shorter than
761 # 120 characters. If you use scripts like getops.tcl or botnetop.tcl,
762 # you don't need to set this setting
763 #
764 # need-limit { putserv "PRIVMSG #lamest :let me in!" }
765 # This setting will make the bot run the script enclosed in brackets
766 # if it needs the limit to be raised on the channel. This must be
767 # shorter than 120 characters. If you use scripts like getops.tcl or
768 # botnetop.tcl, you don't need to set this setting
769 #
770 # flood-chan 15:60
771 # Set here how many channel messages in how many seconds from one
772 # host constitutes a flood. Setting this to 0 or 0:0 disables
773 # flood protection for the channel.
774 #
775 # flood-deop 3:10
776 # Set here how many deops in how many seconds from one host constitutes
777 # a flood. Setting this to 0 or 0:0 disables deop flood protection for
778 # the channel.
779 #
780 # flood-kick 3:10
781 # Set here how many kicks in how many seconds from one host constitutes
782 # a flood. Setting this to 0 or 0:0 disables kick flood protection for
783 # the channel.
784 #
785 # flood-join 5:60
786 # Set here how many joins in how many seconds from one host constitutes
787 # a flood. Setting this to 0 or 0:0 disables join flood protection for
788 # the channel.
789 #
790 # flood-ctcp 3:60
791 # Set here how many channel ctcps in how many seconds from one host
792 # constitutes a flood. Setting this to 0 or 0:0 disables ctcp flood
793 # protection for the channel.
794 #
795 # flood-nick 5:60
796 # Set here how many nick changes in how many seconds from one host
797 # constitutes a flood. Setting this to 0 or 0:0 disables nick flood
798 # protection for the channel.
799 #
800 # A complete list of all available channel settings:
801 #
802 # enforcebans
803 # When a ban is set, kick people who are on the channel and match
804 # the ban?
805 #
806 # dynamicbans
807 # Only activate bans on the channel when necessary? This keeps
808 # the channel's ban list from getting excessively long. The bot
809 # still remembers every ban, but it only activates a ban on the
810 # channel when it sees someone join who matches that ban.
811 #
812 # userbans
813 # Allow bans to be made by users directly? If turned off, the bot
814 # will require all bans to be made through the bot's console.
815 #
816 # dynamicexempts
817 # Only activate exempts on the channel when necessary? This keeps
818 # the channel's exempt list from getting excessively long. The bot
819 # still remembers every exempt, but it only activates a exempt on
820 # the channel when it sees a ban set that matches the exempt. The
821 # exempt remains active on the channel for as long as the ban is
822 # still active.
823 #
824 # userexempts
825 # Allow exempts to be made by users directly? If turned off, the
826 # bot will require all exempts to be made through the bot's console.
827 #
828 # dynamicinvites
829 # Only activate invites on the channel when necessary? This keeps
830 # the channel's invite list from getting excessively long. The bot
831 # still remembers every invite, but the invites are only activated
832 # when the channel is set to invite only and a user joins after
833 # requesting an invite. Once set, the invite remains until the
834 # channel goes to -i.
835 #
836 # userinvites
837 # Allow invites to be made by users directly? If turned off, the
838 # bot will require all invites to be made through the bot's console.
839 #
840 # autoop
841 # Op users with the +o flag as soon as they join the channel?
842 # This is insecure and not recommended.
843 #
844 # autohalfop
845 # Halfop users with the +l flag as soon as they join the channel?
846 # This is insecure and not recommended.
847 #
848 # bitch
849 # Only let users with +o) flag be opped on the channel?
850 #
851 # greet
852 # Say a user's info line when they join the channel?
853 #
854 # protectops
855 # Re-op a user with the +o flag if they get deopped?
856 #
857 # protecthalfops
858 # Re-halfop a user with the +l flag if they get dehalfopped?
859 #
860 # protectfriends
861 # Re-op a user with the +f flag if they get deopped?
862 #
863 # statuslog
864 # Log the channel status line every 5 minutes? This shows the bot's
865 # status on the channel (op, voice, etc.), the channel's modes, and
866 # the total number of members, ops, voices, regular users, and +b,
867 # +e, and +I modes on the channel. A sample status line follows:
868 #
869 # [01:40] @#lamest (+istn) : [m/1 o/1 v/4 n/7 b/1 e/5 I/7]
870 #
871 # revenge
872 # Remember people who deop/kick/ban the bot, valid ops, or friends
873 # and punish them? Users with the +f flag are exempt from revenge.
874 #
875 # revengebot
876 # This is similar to to the 'revenge' option, but it only triggers
877 # if a bot gets deopped, kicked or banned.
878 #
879 # autovoice
880 # Voice users with the +v flag when they join the channel?
881 #
882 # secret
883 # Prevent this channel from being listed on the botnet?
884 #
885 # shared
886 # Share channel-related user info for this channel?
887 #
888 # cycle
889 # Cycle the channel when it has no ops?
890 #
891 # dontkickops
892 # Do you want the bot not to be able to kick users who have the +o
893 # flag, letting them kick-flood for instance to protect the channel
894 # against clone attacks.
895 #
896 # inactive
897 # This prevents the bot from joining the channel (or makes it leave
898 # the channel if it is already there). It can be useful to make the
899 # bot leave a channel without losing its settings, channel-specific
900 # user flags, channel bans, and without affecting sharing.
901 #
902 # seen
903 # Respond to seen requests in the channel? The seen module must be
904 # loaded for this to work.
905 #
906 # nodesynch
907 # Allow non-ops to perform channel modes? This can stop the bot from
908 # fighting with services such as ChanServ, or from kicking IRCops when
909 # setting channel modes without having ops.
910 #
911 # static
912 # Allow only permanent owners to remove the channel?
913
914 # To add a channel to eggdrop, please enter the bot's partyline and type
915 # .+chan #channel. Check also .help chanset and .help chaninfo.
916 # You can still add a channel here and it will be saved if you have a
917 # chanfile. We recommend you to use the partyline though.
918 #
919 #channel add #lamest
920
921
922 #### SERVER MODULE ####
923
924 # This module provides the core server support. You have to load this
925 # if you want your bot to come on IRC. Not loading this is equivalent
926 # to the old NO_IRC define.
927 loadmodule server
928
929 # Control certificate verification for irc servers. For a description of the
930 # possible values, look at the SSL SETTINGS section above.
931 #set ssl-verify-server 0
932
933 # What is your network?
934 # 0 = EFnet
935 # 1 = IRCnet
936 # 2 = Undernet
937 # 3 = DALnet
938 # 4 = +e/+I/max-modes 20 Hybrid
939 # 5 = Others
940 set net-type 0
941
942 # Set the nick the bot uses on IRC, and on the botnet unless you specify a
943 # separate botnet-nick, here.
944 set nick "Lamestbot"
945
946 # Set the alternative nick which the bot uses on IRC if the nick specified
947 # by 'set nick' is unavailable. All '?' characters will be replaced by random
948 # numbers.
949 set altnick "Llamab?t"
950
951 # Set what should be displayed in the real-name field for the bot on IRC.
952 # This can not be blank, it has to contain something.
953 set realname "/msg LamestBot hello"
954
955 # This is a Tcl script to be run immediately after connecting to a server.
956 bind evnt - init-server evnt:init_server
957
958 proc evnt:init_server {type} {
959 global botnick
960 putquick "MODE $botnick +i-ws"
961 }
962
963 # Set the default port which should be used if none is specified with
964 # '.jump' or in 'set servers'.
965 set default-port 6667
966
967 # This is the bot's server list. The bot will start at the first server listed,
968 # and cycle through them whenever it gets disconnected. You need to change these
969 # servers to YOUR network's servers.
970 #
971 # The format is:
972 # server[:port[:password]]
973 # Prefix the port with a plus sign to attempt a SSL connection:
974 # server:+port[:password]
975 # If you need to specify a numeric server IPv6 address, enclose it in square
976 # brackets.
977 #
978 # Both the port and password fields are optional; however, if you want to set a
979 # password or use SSL you must also set a port. If a port isn't specified it
980 # will default to your default-port setting.
981 set servers {
982 you.need.to.change.this:6667
983 another.example.com:7000:password
984 [2001:db8:618:5c0:263::]:6669:password
985 ssl.example.net:+6697
986 }
987
988 # Number of seconds to wait between transmitting queued lines to the server.
989 # Lower this value at your own risk. ircd is known to start flood control
990 # at 512 bytes/2 seconds.
991 set msg-rate 2
992
993 # This setting makes the bot try to get his original nickname back if its
994 # primary nickname is already in use.
995 set keep-nick 1
996
997
998 # This setting makes the bot squelch the error message when rejecting a DCC
999 # CHAT, SEND or message command. Normally, Eggdrop notifies the user that the
1000 # command has been rejected because they don't have access. Note that sometimes
1001 # IRC server operators detect bots that way.
1002 set quiet-reject 1
1003
1004 # If you want your bot to answer lower case ctcp requests (non rfc-
1005 # compliant), set this setting to 1. mIRC will do this, most other
1006 # clients will not.
1007 set lowercase-ctcp 0
1008
1009 # Set how many ctcps should be answered at once.
1010 set answer-ctcp 3
1011
1012 # Set here how many msgs in how many seconds from one host constitutes
1013 # a flood. If you set this to 0:0, msg flood protection will be disabled.
1014 set flood-msg 5:60
1015
1016 # Set here how many ctcps in how many seconds from one host constitutes
1017 # a flood. If you set this to 0:0, ctcp flood protection will be disabled.
1018 set flood-ctcp 3:60
1019
1020 # This setting defines how long Eggdrop should wait before moving from one
1021 # server to another on disconnect. If you set 0 here, Eggdrop will not wait
1022 # at all and will connect instantly. Setting this too low could result in
1023 # your bot being K:Lined.
1024 set server-cycle-wait 60
1025
1026 # Set here how long Eggdrop should wait for a response when connecting to a
1027 # server before giving up and moving on to next server.
1028 set server-timeout 60
1029
1030 # If the number of servers on the net gets below this number, the bot
1031 # will jump to a new server (it will assume it's on the losing end of
1032 # a netsplit). Set this to 0 to turn off. If your bot is running on
1033 # any major IRC network, this should probably be turned off.
1034 set servlimit 0
1035
1036 # Set this to 1 if Eggdrop should check for stoned servers? (where the
1037 # server connection has died, but Eggdrop hasn't been notified yet).
1038 set check-stoned 1
1039
1040 # If you want your bot to exit the server if it receives an ERROR message,
1041 # set this to 1.
1042 set serverror-quit 1
1043
1044 # Set here the maximum number of lines to queue to the server. If you're
1045 # going to dump large chunks of text to people over IRC, you will probably
1046 # want to raise this. 300 is fine for most people though.
1047 set max-queue-msg 300
1048
1049 # If you want Eggdrop to trigger binds for ignored users, set this to 1.
1050 set trigger-on-ignore 0
1051
1052 # This setting configures PUBM and MSGM binds to be exclusive of PUB and MSG
1053 # binds. This means if a MSGM bind with the mask "*help*" exists and is
1054 # triggered, any MSG bindings with "help" in their mask will not be
1055 # triggered. Don't enable this unless you know what you are doing!
1056 set exclusive-binds 0
1057
1058 # Allow identical messages in the mode queue?
1059 set double-mode 1
1060
1061 # Allow identical messages in the server queue?
1062 set double-server 1
1063
1064 # Allow identical messages in the help queue?
1065 set double-help 1
1066
1067 # This optimizes the kick queue. It also traces nick changes and parts in
1068 # the channel and changes the kick queue accordingly. There are three
1069 # different options for this setting:
1070 # 0 = Turn it off.
1071 # 1 = Optimize the kick queue by summarizing kicks.
1072 # 2 = Trace nick changes and parts on the channel and change the queue
1073 # accordingly. For example, bot will not try to kick users who have
1074 # already parted the channel.
1075 # ATTENTION: Setting 2 is very CPU intensive.
1076 set optimize-kicks 1
1077
1078 # If your network supports more recipients per command then 1, you can
1079 # change this behavior here. Set this to the number of recipients per
1080 # command, or set this to 0 for unlimited.
1081 set stack-limit 4
1082
1083 ### SERVER MODULE - OTHER NETWORKS (net-type 5) ###
1084
1085 # This settings defines how umode +r is understood by Eggdrop. Some networks
1086 # use +r to indicate a restricted connection. If this is your case, and you
1087 # want your bot to leave restricted servers and jump to the next server on its
1088 # list, then set it to 1.
1089 #set check-mode-r 1
1090
1091 # This setting allows you to specify the maximum nick-length supported by your
1092 # network. The default setting is 9. The maximum supported length by Eggdrop
1093 # is 32.
1094 #set nick-len 9
1095
1096 #### CTCP MODULE ####
1097
1098 # This module provides the normal ctcp replies that you'd expect.
1099 # Without it loaded, CTCP CHAT will not work. The server module
1100 # is required for this module to function.
1101 loadmodule ctcp
1102
1103 # Set here how the ctcp module should answer ctcps. There are 3 possible
1104 # operating modes:
1105 # 0: Normal behavior is used.
1106 # 1: The bot ignores all ctcps, except for CHAT and PING requests
1107 # by users with the +o flag.
1108 # 2: Normal behavior is used, however the bot will not answer more
1109 # than X ctcps in Y seconds (defined by 'set flood-ctcp').
1110 set ctcp-mode 0
1111
1112 # There are also several variables to help make your bot less noticeable.
1113 # They are: ctcp-version, ctcp-finger, and ctcp-userinfo. You can use set to set
1114 # them to values you'd like.
1115
1116
1117 #### IRC MODULE ####
1118
1119 # This module provides basic IRC support for your bot. You have to
1120 # load this if you want your bot to come on IRC. The server and channels
1121 # modules must be loaded for this module to function.
1122 loadmodule irc
1123
1124 # Set this to 1 if you want to bounce all server bans.
1125 set bounce-bans 0
1126
1127 # Set this to 1 if you want to bounce all server exemptions (+e modes).
1128 # This is disabled if use-exempts is disabled.
1129 set bounce-exempts 0
1130
1131 # Set this to 1 if you want to bounce all server invitations (+I modes).
1132 # This is disabled if use-invites is disabled.
1133 set bounce-invites 0
1134
1135 # Set this to 1 if you want to bounce all server modes.
1136 set bounce-modes 0
1137
1138 # Set here the maximum number of bans you want the bot to set on a channel.
1139 # Eggdrop will not place any more bans if this limit is reached. Undernet
1140 # currently allows 45 bans, IRCnet allows 30, EFnet allows 100, and DALnet
1141 # allows 100.
1142 set max-bans 30
1143
1144 # Set here the maximum number of exempts you want Eggdrop to set on a channel.
1145 # Eggdrop will not place any more exempts if this limit is reached.
1146 set max-exempts 20
1147
1148 # Set here the maximum number of invites you want Eggdrop to set on a channel.
1149 # Eggdrop will not place any more invites if this limit is reached.
1150 set max-invites 20
1151
1152 # There is a global limit for +b/+e/+I modes. This limit should be set to
1153 # the same value as max-bans for networks that do not support +e/+I.
1154 set max-modes 30
1155
1156 # The following settings should be left commented unless the default values
1157 # are being overridden. By default, exempts and invites are on for EFnet and
1158 # IRCnet, but off for all other large networks. This behavior can be modified
1159 # with the following 2 flags. If your network doesn't support +e/+I modes then
1160 # you will be unable to use these features.
1161 #
1162 # Do you want to enable exempts (+e modes)?
1163 #set use-exempts 0
1164
1165 # Do you want to enable invites (+I modes)?
1166 #set use-invites 0
1167
1168 # If you want people to be able to add themselves to the bot's userlist
1169 # with the default userflags (defined above in the config file) via the
1170 # 'hello' msg command, set this to 1.
1171 set learn-users 0
1172
1173 # Set here the time (in seconds) to wait for someone to return from a netsplit
1174 # (i.e. wasop will expire afterwards). Set this to 1500 on IRCnet since its
1175 # nick delay stops after 30 minutes.
1176 set wait-split 600
1177
1178 # Set here the time (in seconds) that someone must have been off-channel
1179 # before re-displaying their info line.
1180 set wait-info 180
1181
1182 # Set this to the maximum number of bytes to send in the arguments
1183 # of modes sent to the server. Most servers default this to 200.
1184 set mode-buf-length 200
1185
1186 # Many IRCops find bots by seeing if they reply to 'hello' in a msg.
1187 # You can change this to another word by un-commenting the following
1188 # two lines and changing "myword" to the word wish to use instead of
1189 # 'hello'. It must be a single word.
1190 #unbind msg - hello *msg:hello
1191 #bind msg - myword *msg:hello
1192
1193 # Many takeover attempts occur due to lame users blindly /msg ident'ing to
1194 # the bot and attempting to guess passwords. We now unbind this command by
1195 # default to discourage them. You can enable these commands by commenting the
1196 # following two lines.
1197 unbind msg - ident *msg:ident
1198 unbind msg - addhost *msg:addhost
1199
1200 # Some IRC servers are using some non-standard op-like channel prefixes/modes.
1201 # Define them here so the bot can recognize them. Just "@" should be fine for
1202 # most networks. Un-comment the second line for some UnrealIRCds.
1203
1204 set opchars "@"
1205 #set opchars "@&~"
1206
1207 # If you are so lame you want the bot to display peoples info lines, even
1208 # when you are too lazy to add their chanrecs to a channel, set this to 1.
1209 # *NOTE* This means *every* user with an info line will have their info
1210 # line displayed on EVERY channel they join (provided they have been gone
1211 # longer than wait-info).
1212 set no-chanrec-info 0
1213
1214 ### IRC MODULE - IRCnet SPECIFIC FEATURES (net-type 1) ###
1215
1216 # Attention: Use these settings *only* if you set 'net-type' to 1!
1217
1218 # At the moment, the current IRCnet IRCd version (2.10) doesn't support the
1219 # mixing of b, o and v modes with e and I modes. This might be changed in the
1220 # future, so use 1 at the moment for this setting.
1221 set prevent-mixing 1
1222
1223 ### IRC MODULE - OTHER NETWORKS (net-type 5) ###
1224
1225 # Attention: Use these settings *only* if you set 'net-type' to 5!
1226
1227 # If your network supports more users per kick command then 1, you can
1228 # change this behavior here. Set this to the number of users to kick at
1229 # once, or set this to 0 for all at once.
1230 #set kick-method 1
1231
1232 # Some networks allow you to stack lots of channel modes into one line.
1233 # They're all guaranteed to support at least 3, so that's the default.
1234 # If you know your network supports more, you may want to adjust this.
1235 # This setting is limited to 6, although if you want to use a higher value,
1236 # you can modify this by changing the value of MODES_PER_LINE_MAX in
1237 # src/chan.h and recompiling the bot.
1238 #set modes-per-line 3
1239
1240 # Some networks don't include the +l limit and +k or -k key modes
1241 # in the modes-per-line (see above) limitation. Set include-lk to 0 for
1242 # these networks.
1243 #set include-lk 1
1244
1245 # Set this to 1 if your network uses IRCu2.10.01 specific /who requests.
1246 # Eggdrop can, therefore, ask only for exactly what's needed.
1247 #set use-354 0
1248
1249 # If your network doesn't use rfc 1459 compliant string matching routines,
1250 # set this to 0.
1251 #set rfc-compliant 1
1252
1253
1254 #### TRANSFER MODULE ####
1255
1256 # The transfer module provides DCC SEND/GET support and userfile transfer
1257 # support for userfile sharing. Un-comment the next line to load it if you
1258 # need this functionality.
1259 #loadmodule transfer
1260
1261 # Set here the maximum number of simultaneous downloads to allow for
1262 # each user.
1263 set max-dloads 3
1264
1265 # Set here the block size for dcc transfers. ircII uses 512 bytes,
1266 # but admits that it may be too small. 1024 is standard these days.
1267 # 0 is turbo-dcc (recommended).
1268 set dcc-block 0
1269
1270 # Enable this setting if you want to copy files into the /tmp directory
1271 # before sending them. This is useful on most systems for file stability,
1272 # but if your directories are NFS mounted, it's a pain, and you'll want
1273 # to set this to 0. If you are low on disk space, you may also want to
1274 # set this to 0.
1275 set copy-to-tmp 1
1276
1277 # Set here the time (in seconds) to wait before an inactive transfer times out.
1278 set xfer-timeout 30
1279
1280
1281 #### SHARE MODULE ####
1282
1283 # This module provides userfile sharing support between two directly
1284 # linked bots. The transfer and channels modules are required for this
1285 # module to correctly function. Un-comment the following line to load
1286 # the share module.
1287 #loadmodule share
1288
1289 # Settings in this section must be un-commented before setting.
1290
1291 # When two bots get disconnected, this setting allows them to create a
1292 # resync buffer which saves all changes done to the userfile during
1293 # the disconnect. When they reconnect, they will not have to transfer
1294 # the complete user file, but, instead, just send the resync buffer.
1295 #
1296 # NOTE: This has been known to cause loss of channel flags and other
1297 # problems. Using this setting is not recommended.
1298 #set allow-resync 0
1299
1300 # This setting specifies how long to hold another bots resync data
1301 # before flushing it.
1302 #set resync-time 900
1303
1304 # When sharing user lists, DON'T ACCEPT global flag changes from other bots?
1305 # NOTE: The bot will still send changes made on the bot, it just won't accept
1306 # any global flag changes from other bots. This overrides the private-globals
1307 # setting (below).
1308 #set private-global 0
1309
1310 # When sharing user lists, if private-global isn't set, which global flag
1311 # changes from other bots should be ignored?
1312 #set private-globals "mnot"
1313
1314 # When sharing user lists, don't accept ANY userfile changes from other
1315 # bots? Paranoid people should use this feature on their hub bot. This
1316 # will force all userlist changes to be made via the hub.
1317 #set private-user 0
1318
1319 # This setting makes the bot discard its own bot records in favor of
1320 # the ones sent by the hub.
1321 # NOTE: No passwords or botflags are shared, only ports and
1322 # address are added to sharing procedure. This only works with hubs that
1323 # are v1.5.1 or higher.
1324 #set override-bots 0
1325
1326
1327 #### COMPRESS MODULE ####
1328
1329 # This module provides provides support for file compression. This allows the
1330 # bot to transfer compressed user files and therefore save a significant amount
1331 # of bandwidth. The share module must be loaded to load this module. Un-comment
1332 # the following line to the compress module.
1333 #loadmodule compress
1334
1335 # Allow compressed sending of user files? The user files are compressed with
1336 # the compression level defined in `compress-level'.
1337 set share-compressed 1
1338
1339 # This is the default compression level used. These levels are the same as
1340 # those used by GNU gzip.
1341 #set compress-level 9
1342
1343
1344 #### FILESYSTEM MODULE ####
1345
1346 # This module provides an area within the bot where users can store and
1347 # manage files. With this module, the bot is usable as a file server. The
1348 # transfer module is required for this module to function. Un-comment
1349 # the following line to load the filesys module.
1350 #loadmodule filesys
1351
1352 # Set here the 'root' directory for the file system.
1353 set files-path "/home/mydir/filesys"
1354
1355 # If you want to allow uploads, set this to the directory uploads
1356 # should be put into. Set this to "" if you don't want people to
1357 # upload files to your bot.
1358 set incoming-path "/home/mydir/filesys/incoming"
1359
1360 # If you don't want to have a central incoming directory, but instead
1361 # want uploads to go to the current directory that a user is in, set
1362 # this setting to 1.
1363 set upload-to-pwd 0
1364
1365 # Eggdrop creates a '.filedb' file in each subdirectory of your file area
1366 # to keep track of its own file system information. If you can't do that (for
1367 # example, if the dcc path isn't owned by you, or you just don't want it to do
1368 # that) specify a path here where you'd like all of the database files to be
1369 # stored instead.
1370 set filedb-path ""
1371
1372 # Set here the maximum number of people that can be in the file area at once.
1373 # Setting this to 0 makes it effectively infinite.
1374 set max-file-users 20
1375
1376 # Set here the maximum allowable file size that will be received (in KB).
1377 # Setting this to 0 makes it effectively infinite.
1378 set max-filesize 1024
1379
1380
1381 #### NOTES MODULE ####
1382
1383 # This module provides support for storing of notes for users from each other.
1384 # Note sending between currently online users is supported in the core, this is
1385 # only for storing the notes for later retrieval.
1386 loadmodule notes
1387
1388 # Set here the filename where private notes between users are stored.
1389 set notefile "LamestBot.notes"
1390
1391 # Set here the maximum number of notes to allow to be stored for each user
1392 # (to prevent flooding).
1393 set max-notes 50
1394
1395 # Set here how long (in days) to store notes before expiring them.
1396 set note-life 60
1397
1398 # Set this to 1 if you want to allow users to specify a forwarding address
1399 # for forwarding notes to another account on another bot.
1400 set allow-fwd 0
1401
1402 # Set this to 1 if you want the bot to let people know hourly if they have
1403 # any notes.
1404 set notify-users 0
1405
1406 # Set this to 1 if you want the bot to let people know on join if they have
1407 # any notes.
1408 set notify-onjoin 1
1409
1410 # Comment out this next line. Otherwise, your bot won't start.
1411 die "You didn't edit your config file completely like you were told, did you?"
1412
1413
1414 #### CONSOLE MODULE ####
1415
1416 # This module provides storage of console settings when you exit the
1417 # bot or type .store on the partyline.
1418 loadmodule console
1419
1420 # Save users console settings automatically? Otherwise, they have
1421 # to use the .store command.
1422 set console-autosave 1
1423
1424 # If a user doesn't have any console settings saved, which channel
1425 # do you want them automatically put on?
1426 set force-channel 0
1427
1428 # Enable this setting if a user's global info line should be displayed
1429 # when they join a botnet channel.
1430 set info-party 0
1431
1432
1433 #### WOOBIE MODULE ####
1434
1435 # This is for demonstrative purposes only. If you are looking for starting
1436 # point in writing modules, woobie is the right thing.
1437 #loadmodule woobie
1438
1439
1440 #### SEEN MODULE ####
1441
1442 # This module provides very basic seen commands via msg, on channel or via dcc.
1443 # This module works only for users in the bot's userlist. If you are looking for
1444 # a better and more advanced seen module, try the gseen module by G'Quann. You
1445 # can find it at http://www.kreativrauschen.com/gseen.mod/.
1446 #loadmodule seen
1447
1448
1449 #### ASSOC MODULE ####
1450
1451 # This module provides assoc support, i.e. naming channels on the botnet.
1452 # You can load it by un-commenting the following line.
1453 #loadmodule assoc
1454
1455
1456 #### UPTIME MODULE ####
1457
1458 # This module reports uptime statistics to http://uptime.eggheads.org.
1459 # Go look and see what your uptime is! It takes about 9 hours to show up,
1460 # so if your bot isn't listed, try again later. The server module must be
1461 # loaded for this module to function.
1462 #
1463 # Information sent to the server includes the bot's uptime, botnet-nick,
1464 # server, version, and IP address. This information is stored in a temporary
1465 # logfile for debugging purposes only. The only publicly available information
1466 # will be the bot's botnet-nick, version and uptime. If you do not wish for this
1467 # information to be sent, comment out the following line.
1468 loadmodule uptime
1469
1470 ##### SCRIPTS #####
1471
1472 # This is a good place to load scripts to use with your bot.
1473
1474 # This line loads script.tcl from the scripts directory inside your Eggdrop's
1475 # directory. All scripts should be put there, although you can place them where
1476 # you like as long as you can supply a fully qualified path to them.
1477 #
1478 # source scripts/script.tcl
1479
1480 source scripts/alltools.tcl
1481 source scripts/action.fix.tcl
1482
1483 # This script enhances Eggdrop's built-in dcc '.whois' command to allow all
1484 # users to '.whois' their own handle.
1485 source scripts/dccwhois.tcl
1486
1487 # This script provides many useful informational functions, like setting
1488 # users' URLs, e-mail address, ICQ numbers, etc. You can modify it to add
1489 # extra entries.
1490 source scripts/userinfo.tcl
1491 loadhelp userinfo.help
1492
1493 # Use this script for Tcl and Eggdrop backwards compatibility.
1494 # NOTE: This can also cause problems with some newer scripts.
1495 #source scripts/compat.tcl
1496
1497 # A few IRC networks (EFnet and Undernet) have added some simple checks to
1498 # prevent drones from connecting to the IRC network. While these checks are
1499 # fairly trivial, they will prevent your Eggdrop from automatically
1500 # connecting. In an effort to work-around these, we have developed a couple of
1501 # TCL scripts to automate the process.
1502
1503 if {[info exists net-type]} {
1504 switch -- ${net-type} {
1505 "0" {
1506 # EFnet
1507 source scripts/quotepong.tcl
1508 }
1509 "2" {
1510 # Undernet
1511 source scripts/quotepass.tcl
1512 }
1513 }
1514 }

webmaster@eggheads.org
ViewVC Help
Powered by ViewVC 1.1.23