/[cvs]/eggdrop1.8/eggdrop.conf
ViewVC logotype

Contents of /eggdrop1.8/eggdrop.conf

Parent Directory Parent Directory | Revision Log Revision Log | View Revision Graph Revision Graph


Revision 1.6 - (show annotations) (download)
Sat Oct 23 11:16:11 2010 UTC (8 years, 5 months ago) by pseudo
Branch: MAIN
Changes since 1.5: +1 -9 lines
Modified SIGQUIT handler to restart the bot by default.
Added support for evnt bind procs to cancel default signal actions.
Removed the die-on-sighup and die-on-sigterm variables.
Added a new bind type DIE triggered before a clean shutdown. Changed the exit status on clean shutdown to 0.

1 #! /path/to/executable/eggdrop
2 # ^- This should contain a fully qualified path to your Eggdrop executable.
3 #
4 # $Id: eggdrop.conf,v 1.5 2010/10/19 12:13:32 pseudo Exp $
5 #
6 # This is a sample Eggdrop configuration file which includes all possible
7 # settings that can be used to configure your bot.
8 #
9 # The pound signs (#) that you see at the beginning of some lines mean that
10 # the remainder of that line is a comment, or just for your information. By
11 # adding or deleting pound signs, you can comment or uncomment a setting,
12 # respectively.
13 #
14 # Arguments for a command or setting may be inclosed in <>'s or []'s in the
15 # example/description. Arguments in <>'s are required, while [] means optional.
16 #
17 # More detailed descriptions of all these settings can be found in
18 # doc/settings/.
19
20
21
22 ##### BASIC SETTINGS #####
23
24 # This setting defines the username the bot uses on IRC. This setting has
25 # no effect if an ident daemon is running on your bot's machine.
26 set username "lamest"
27
28 # This setting defines which contact person should be shown in .status,
29 # /msg help, and other places. You really should include this information.
30 set admin "Lamer <email: lamer@lamest.lame.org>"
31
32 # This setting is used only for info to share with others on your botnet.
33 # Set this to the IRC network your bot is connected to.
34 set network "I.didn't.edit.my.config.file.net"
35
36 # This setting defines which timezone is your bot in. It's used for internal
37 # routines as well as for logfile timestamping and scripting purposes.
38 # The timezone string specifies the name of the timezone and must be three
39 # or more alphabetic characters. For example, Central European Time(UTC+1)
40 # should be "CET".
41 set timezone "EST"
42
43 # The offset setting specifies the time value to be added to the local
44 # time to get Coordinated Universal Time (UTC aka GMT). The offset is
45 # positive if the local timezone is west of the Prime Meridian and
46 # negative if it is east. The value (in hours) must be between -23 and
47 # 23. For example, if the timezone is UTC+1, the offset is -1.
48 set offset "5"
49
50 # If you don't want to use the timezone setting for scripting purposes only,
51 # but instead everywhere possible, un-comment the following line.
52 #set env(TZ) "$timezone$offset"
53
54 # If you're using virtual hosting (your machine has more than 1 IP), you
55 # may want to specify the particular IP to bind to. You can specify either
56 # by hostname or by IP. Note that this is not used for listening. Use the
57 # 'listen-addr' variable to specify the listening address.
58 #set vhost4 "virtual.host.com"
59 #set vhost4 "99.99.0.0"
60
61 # IPv6 vhost to bind to for outgoing IPv6 connections. You can set it
62 # to any valid IPv6 address or hostname, resolving to an IPv6 address.
63 # Note that this is not used for listening. Use the 'listen-addr'
64 # variable to specify the listening address.
65 #set vhost6 "my.ipv6.host.com"
66 #set vhost6 "2001:db8::c001:b07"
67
68 # IPv4/IPv6 address (or hostname) to bind for listening. If you don't set
69 # this variable, eggdrop will listen on all available IPv4 or IPv6 interfaces,
70 # depending on the 'prefer-ipv6' variable (see below).
71 # Note that eggdrop will accept IPv4 connections with IPv6 sockets too.
72 #set listen-addr "99.99.0.0"
73 #set listen-addr "2001:db8:618:5c0:263::"
74 #set listen-addr "virtual.host.com"
75
76 # Prefer IPv6 over IPv4 for connections and dns resolution?
77 # If the preferred protocol family is not supported, the other one
78 # will be tried.
79 set prefer-ipv6 0
80
81 # If you want to have your Eggdrop messages displayed in a language other
82 # than English, change this setting to match your preference. An alternative
83 # would be to set the environment variable EGG_LANG to that value.
84 #
85 # Languages included with Eggdrop: Danish, English, French, Finnish, German.
86 #addlang "english"
87
88
89 ##### LOG FILES #####
90
91 # Eggdrop is capable of logging various things, from channel chatter to
92 # commands people use on the bot and file transfers. Logfiles are normally
93 # kept for 24 hours. Afterwards, they will be renamed to "(logfile).yesterday".
94 # After 48 hours, they will be overwritten by the logfile of the next day.
95 #
96 # Events are logged by certain categories. This way, you can specify
97 # exactly what kind of events you want sent to various logfiles.
98 #
99 # Logfile flags:
100 # b - information about bot linking and userfile sharing
101 # c - commands
102 # d - misc debug information
103 # h - raw share traffic
104 # j - joins, parts, quits, and netsplits on the channel
105 # k - kicks, bans, and mode changes on the channel
106 # m - private msgs, notices and ctcps to the bot
107 # o - misc info, errors, etc (IMPORTANT STUFF)
108 # p - public text on the channel
109 # r - raw incoming server traffic
110 # s - server connects, disconnects, and notices
111 # t - raw botnet traffic
112 # v - raw outgoing server traffic
113 # w - wallops (make sure the bot sets +w in init-server)
114 # x - file transfers and file-area commands
115 #
116 # Note that modes d, h, r, t, and v can fill disk quotas quickly. There are
117 # also eight user-defined levels (1-8) which can be used by Tcl scripts.
118 #
119 # Each logfile belongs to a certain channel. Events of type 'k', 'j', and 'p'
120 # are logged to whatever channel they happened on. Most other events are
121 # currently logged to every channel. You can make a logfile belong to all
122 # channels by assigning it to channel "*".
123
124 # This is the maximum number of logfiles allowed. This setting can be
125 # increased; however, don't decrease it.
126 set max-logs 5
127
128 # This is the maximum size of your logfiles. Set it to 0 to disable.
129 # This value is in kilobytes, so '550' would mean cycle logs when it
130 # reaches the size of 550 kilobytes. Note that this only works if you
131 # have keep-all-logs 0 (OFF).
132 set max-logsize 0
133
134 # This could be good if you have had problem with the logfile filling
135 # your quota/hard disk or if you log +p and publish it to the web and
136 # need more up-to-date info. Note that this setting might increase the
137 # CPU usage of your bot (on the other hand it will decrease your mem usage).
138 set quick-logs 0
139
140 # This setting allows you the logging of raw incoming server traffic via
141 # console/log flag 'r', raw outgoing server traffic via console/log mode 'v',
142 # raw botnet traffic via console/log mode 't', and raw share traffic via
143 # console/log mode 'h'. These flags can create a large security hole,
144 # allowing people to see user passwords. This is now restricted to +n users
145 # only. Please choose your owners with care.
146 set raw-log 0
147
148 # This creates a logfile named eggdrop.log containing private msgs/ctcps,
149 # commands, errors, and misc. info from any channel.
150 logfile mco * "logs/eggdrop.log"
151
152 # This creates a logfile named lamest.log containing joins, parts,
153 # netsplits, kicks, bans, mode changes, and public chat on the
154 # channel #lamest.
155 #logfile jpk #lamest "logs/lamest.log"
156
157 # Use this feature to timestamp entries in the log file.
158 set log-time 1
159
160 # Set the following to the timestamp for the logfile entries. Popular times
161 # might be "[%H:%M]" (hour, min), or "[%H:%M:%S]" (hour, min, sec).
162 # Read `man strftime' for more formatting options. Keep it below 32 chars.
163 set timestamp-format {[%H:%M:%S]}
164
165 # If you want to keep your logfiles forever, turn this setting on. All
166 # logfiles will get suffix ".[day, 2 digits][month, 3 letters][year, 4 digits]".
167 # Note that your quota/hard-disk might be filled by this, so check your
168 # logfiles often and download them.
169 set keep-all-logs 0
170
171 # If keep-all-logs is 1, this setting will define the suffix of the logfiles.
172 # The default will result in a suffix like "04May2000". "%Y%m%d" will produce
173 # the often used yyyymmdd format. Read the strftime manpages for more options.
174 # NOTE: On systems which don't support strftime, the default format will
175 # be used _always_.
176 set logfile-suffix ".%d%b%Y"
177
178 # You can specify when Eggdrop should switch logfiles and start fresh. You
179 # must use military time for this setting. 300 is the default, and describes
180 # 03:00 (AM).
181 set switch-logfiles-at 300
182
183 # "Writing user file..." and "Writing channel file..." messages won't be logged
184 # anymore if this option is enabled. If you set it to 2, the "Backing up user
185 # file..." and "Backing up channel file..." messages will also not be logged.
186 # In addition to this, you can disable the "Switching logfiles..." and the new
187 # date message at midnight, by setting this to 3.
188 set quiet-save 0
189
190
191 ##### CONSOLE #####
192
193 # This is the default console mode. It uses the same event flags as the log
194 # files do. The console channel is automatically set to your "primary" channel,
195 # which is set in the modules section of the config file. Masters can change
196 # their console channel and modes with the '.console' command.
197
198 set console "mkcobxs"
199
200
201 ##### FILES AND DIRECTORIES #####
202
203 # Specify here the filename your userfile should be saved as.
204 set userfile "LamestBot.user"
205
206 # Specify here the filename Eggdrop will save its pid to. If no pidfile is
207 # specified, pid.(botnet-nick) will be used.
208 #set pidfile "pid.LamestBot"
209
210 # If you want your userfile to be sorted upon saving, enable this setting.
211 # This causes the bot to use a bit more CPU when saving the userfile.
212 set sort-users 0
213
214 # Specify here where Eggdrop should look for help files. Don't modify this
215 # setting unless you know what you're doing!
216 set help-path "help/"
217
218 # Specify here where Eggdrop should look for text files. This is used for
219 # certain Tcl and DCC commands.
220 set text-path "text/"
221
222 # Set here a place to store temporary files.
223 set temp-path "/tmp"
224
225 # The MOTD (Message Of The day) is displayed when people dcc chat or telnet
226 # to the bot. Look at doc/TEXT-SUBSTITUTIONS for options.
227 set motd "text/motd"
228
229 # This banner will be displayed on telnet connections. Look at
230 # doc/TEXT-SUBSTITUTIONS for options.
231 set telnet-banner "text/banner"
232
233 # This specifies what permissions the user, channel, and notes files should
234 # be set to. The octal values are the same as for the chmod system command.
235 #
236 # To remind you:
237 #
238 # u g o u g o u g o
239 # 0600 rw------- 0400 r-------- 0200 -w------- u - user
240 # 0660 rw-rw---- 0440 r--r----- 0220 -w--w---- g - group
241 # 0666 rw-rw-rw- 0444 r--r--r-- 0222 -w--w--w- o - others
242 #
243 # Note that the default 0600 is the most secure one and should only be changed
244 # if you need your files for shell scripting or other external applications.
245 set userfile-perm 0600
246
247
248 ##### BOTNET/DCC/TELNET #####
249
250 # Settings in this section should be unimportant for you until you deal
251 # with botnets (multiple Eggdrops connected together to maximize efficiency).
252 # You should read doc/BOTNET before modifying these settings.
253
254 # If you want to use a different nickname on the botnet than you use on
255 # IRC (i.e. if you're on an un-trusted botnet), un-comment the next line
256 # and set it to the nick you would like to use.
257 #set botnet-nick "LlamaBot"
258
259 # This opens a telnet port by which you and other bots can interact with the
260 # Eggdrop by telneting in.
261 #
262 # There are more options for the listen command in doc/tcl-commands.doc. Note
263 # that if you are running more than one bot on the same machine, you will want
264 # to space the telnet ports at LEAST 5 apart, although 10 is even better.
265 #
266 # Valid ports are typically anything between 1025 and 65535 assuming the
267 # port is not already in use.
268 #
269 # If you would like the bot to listen for users and bots in separate ports,
270 # use the following format:
271 #
272 # listen 3333 bots
273 # listen 4444 users
274 #
275 # If you wish to use only one port, use this format:
276 #
277 # listen 3333 all
278 #
279 # You can setup a SSL port by prepending a plus sign to it:
280 #
281 # listen +5555 all
282 #
283 # You need to un-comment this line and change the port number in order to open
284 # the listen port. You should not keep this set to 3333.
285 #listen 3333 all
286
287 # This setting defines whether or not people can boot users on the Eggdrop
288 # from other bots in your botnet. Valid settings are:
289 # 0 - allow *no* outside boots
290 # 1 - allow boots from sharebots
291 # 2 - allow any boots
292 set remote-boots 2
293
294 # This setting prohibits remote bots from telling your Eggdrop to unlink from
295 # share bots.
296 set share-unlinks 1
297
298 # This setting will drop telnet connections not matching a known host.
299 set protect-telnet 0
300
301 # This setting will make the bot ignore DCC chat requests which appear to
302 # have bogus information on the grounds that the user may have been trying
303 # to make the bot connect to somewhere that will get it into trouble, or
304 # that the user has a broken client, in which case the connect wouldn't work
305 # anyway.
306 set dcc-sanitycheck 0
307
308 # This settings defines a time in seconds that the bot should wait before
309 # a dcc chat, telnet, or relay connection times out.
310 set ident-timeout 5
311
312 # Define here whether or not a +o user still needs the +p flag to dcc the bot.
313 set require-p 1
314
315 # If you want people allow to telnet in and type 'NEW' to become a new user,
316 # set this to 1. This is similar to the 'hello' msg command. The protect-telnet
317 # setting must be set to 0 to use this.
318 set open-telnets 0
319
320 # If you don't want Eggdrop to identify itself as an eggdrop on a telnet
321 # connection, set this setting to 1. Eggdrop will display 'Nickname' instead.
322 set stealth-telnets 0
323
324 # If you want Eggdrop to display a banner when telneting in, set this setting
325 # to 1. The telnet banner is set by 'set telnet-banner'.
326 set use-telnet-banner 0
327
328 # This settings defines a time in seconds that the bot should wait before
329 # a dcc chat, telnet, or relay connection times out.
330 set connect-timeout 15
331
332 # Specify here the number of lines to accept from a user on the partyline
333 # within 1 second before they are considered to be flooding and therefore
334 # get booted.
335 set dcc-flood-thr 3
336
337 # Define here how many telnet connection attempts in how many seconds from
338 # the same host constitute a flood. The correct format is Attempts:Seconds.
339 set telnet-flood 5:60
340
341 # If you want telnet-flood to apply even to +f users, set this setting to 1.
342 set paranoid-telnet-flood 1
343
344 # Set here the amount of seconds before giving up on hostname/address
345 # lookup (you might want to increase this if you are on a slow network).
346 set resolve-timeout 7
347
348
349 ##### SSL SETTINGS #####
350
351 # Settings in this section take effect when eggdrop is compiled with TLS
352 # support.
353
354 # File containing your private key, needed for the SSL certificate
355 # (see below). You can create one issuing the following command:
356 #
357 # openssl genrsa -out eggdrop.key 2048
358 #
359 # It will create a 2048 bit RSA key, strong enough for eggdrop.
360 # This is required for SSL hubs/listen ports, secure file transfer and
361 # /ctcp botnick schat
362 # For your convenience, you can type 'make sslcert' after 'make install'
363 # and you'll get a key and a certificate in your DEST directory.
364 #set ssl-privatekey "eggdrop.key"
365
366 # Specify the filename where your SSL certificate is located. If you
367 # don't set this, eggdrop will not be able to act as a server in SSL
368 # connections, as with most ciphers a certificate and a private key
369 # are required on the server side. Must be in PEM format.
370 # If you don't have one, you can create it using the following command:
371 #
372 # openssl req -new -key eggdrop.key -x509 -out eggdrop.crt -days 365
373 #
374 # This is required for SSL hubs/listen ports, secure file transfer and
375 # /ctcp botnick schat
376 # For your convenience, you can type 'make sslcert' after 'make install'
377 # and you'll get a key and a certificate in your DEST directory.
378 #set ssl-certificate "eggdrop.crt"
379
380 # Sets the maximum depth for the certificate chain verification that will
381 # be allowed for ssl. When certificate verification is enabled, any chain
382 # exceeding this depth will fail verification.
383 #set ssl-verify-depth 9
384
385 # Specify the location at which CA certificates for verification purposes
386 # are located. These certificates are trusted. If you don't set this,
387 # certificate verification will not work.
388 set ssl-capath "/etc/ssl/"
389 #set ssl-cafile ""
390
391 # Specify the list of ciphers (in order of preference) allowed for use with
392 # ssl. The cipher list is one or more cipher strings separated by colons,
393 # commas or spaces. Unavailable ciphers are silently ignored unless no useable
394 # cipher could be found. For the list of possible cipher strings and their
395 # meanings, please refer to the ciphers(1) manual.
396 # Note: if you set this, the value replaces any ciphers OpenSSL might use by
397 # default. To include the default ciphers, you can put DEFAULT as a cipher
398 # string in the list.
399 # For example:
400 #
401 # set ssl-ciphers "DEFAULT ADH"
402 #
403 # This will make eggdrop allow the default OpenSSL selection plus anonymous
404 # DH ciphers.
405 #
406 # set ssl-ciphers "ALL"
407 #
408 # This will make eggdrop allow all ciphers supported by OpenSSL, in a
409 # reasonable order.
410 #set ssl-ciphers ""
411
412 # Enable certificate authorization. Set to 1 to allow users and bots to
413 # identify automatically by their certificate fingerprints. Setting it
414 # to 2 to will force fingerprint logins. With a value of 2, users without
415 # a fingerprint set or with a certificate UID not matching their handle
416 # won't be allowed to login on SSL enabled telnet ports. Fingerprints
417 # must be set in advance with the .fprint and .chfinger commands.
418 # NOTE: this setting has no effect on plain-text ports.
419 #set ssl-cert-auth 0
420
421 # You can control SSL certificate verification using the following variables.
422 # All of them are flag-based. You can set them by adding together the numbers
423 # for all exceptions you want to enable. By default certificate verification
424 # is disabled and all certificates are assumed to be valid. The numbers are
425 # the following:
426 #
427 # Enable certificate verification - 1
428 # Allow self-signed certificates - 2
429 # Don't check peer common or alt names - 4
430 # Allow expired certificates - 8
431 # Allow certificates which are not valid yet - 16
432 # Allow revoked certificates - 32
433 # A value of 0 disables verification.
434
435 # Control certificate verification for DCC chats (only /dcc chat botnick)
436 #set ssl-verify-dcc 0
437
438 # Control certificate verification for linking to hubs
439 #set ssl-verify-bots 0
440
441 # Control cerfificate verification for SSL listening ports. This includes
442 # leaf bots connecting, users telneting in and /ctcp bot chat.
443 #set ssl-verify-clients 0
444
445
446 ##### MORE ADVANCED SETTINGS #####
447
448 # Set this to your socks host if your Eggdrop sits behind a firewall. If
449 # you use a Sun "telnet passthru" firewall, prefix the host with a '!'.
450 #set firewall "!sun-barr.ebay:3666"
451
452 # If you have a NAT firewall (you box has an IP in one of the following
453 # ranges: 192.168.0.0-192.168.255.255, 172.16.0.0-172.31.255.255,
454 # 10.0.0.0-10.255.255.255 and your firewall transparently changes your
455 # address to a unique address for your box) or you have IP masquerading
456 # between you and the rest of the world, and /dcc chat, /ctcp chat or
457 # userfile sharing aren't working, enter your outside IP here. This IP
458 # is used for transfers only, and has nothing to do with the vhost4/6
459 # or listen-addr settings. You may still need to set them.
460 #set nat-ip "127.0.0.1"
461
462 # If you want all dcc file transfers to use a particular portrange either
463 # because you're behind a firewall, or for other security reasons, set it
464 # here.
465 #set reserved-portrange 2010:2020
466
467 # Set the time in minutes that temporary ignores should last.
468 set ignore-time 15
469
470 # Define here what Eggdrop considers 'hourly'. All calls to it, including such
471 # things as note notifying or userfile saving, are affected by this.
472 # For example:
473 #
474 # set hourly-updates 15
475 #
476 # The bot will save its userfile 15 minutes past every hour.
477 set hourly-updates 00
478
479 # Un-comment the next line and set the list of owners of the bot.
480 # You NEED to change this setting.
481 #set owner "MrLame, MrsLame"
482
483 # Who should a note be sent to when new users are learned?
484 set notify-newusers "$owner"
485
486 # Enter the flags that all new users should get by default. See '.help whois'
487 # on the partyline for a list of flags and their descriptions.
488 set default-flags "hp"
489
490 # Enter all user-defined fields that should be displayed in a '.whois'.
491 # This will only be shown if the user has one of these extra fields.
492 # You might prefer to comment this out and use the userinfo1.0.tcl script
493 # which provides commands for changing all of these.
494 set whois-fields "url birthday"
495
496 # Uncomment these two lines if you wish to disable the .tcl and .set commands.
497 # If you select your owners wisely, you should be okay enabling these.
498 #unbind dcc n tcl *dcc:tcl
499 #unbind dcc n set *dcc:set
500
501 # If you enable this setting, only permanent owners (owner setting) will be
502 # able to use .tcl and .set. Moreover, if you want only let permanent owners
503 # use .dump, then set this to 2.
504 # WARNING: setting this to 0 is a security risk, don't do it unless you trust
505 # your owners enough to give them shell access to the account the bot is
506 # running on.
507 set must-be-owner 1
508
509 # Comment out this line to add the 'simul' partyline command (owners can
510 # manipulate other people on the party line). Please select owners wisely
511 # and use this command ethically!
512 unbind dcc n simul *dcc:simul
513
514 # Set here the maximum number of socket connections you will allow. You can
515 # increase this later, but never decrease it below current usage.
516 # If you're using Tcl threads, this is a per-thread maximum.
517 set max-socks 100
518
519 # Enable this setting if you want +d & +k users to use commands bound as -|-.
520 set allow-dk-cmds 1
521
522 # If your Eggdrop rejects bots that actually have already disconnected from
523 # another hub, but the disconnect information has not yet spread over the
524 # botnet due to lag, use this setting. The bot will wait dupwait-timeout
525 # seconds before it checks again and then finally reject the bot.
526 set dupwait-timeout 5
527
528 # Set this to 0 if you want the bot to strip '~+-^=' characters from user@hosts
529 # before matching them.
530 # This setting is currently kept for compatibility, but will be removed from
531 # the next release. Please leave it set to 1 to avoid problems with your user
532 # files in the future.
533 set strict-host 1
534
535 # Enable cidr support for b/e/I modes. This means the bot will understand
536 # and match modes in cidr notation, and will be able to put and enforce such
537 # bans or unban itself, if banned with a cidr mask.
538 # Do NOT set this, if your network/server does not support cidr!
539 set cidr-support 0
540
541 # You MUST remove this line for your bot to start. This has been added to
542 # prevent you from starting up a bot that is not fully configured. Bots
543 # that have not been fully configured may join the wrong IRC network, the
544 # wrong channels, or generally do things that you do not want. Please make
545 # sure that you have double-checked every setting. There's also a similar line
546 # lower down, just to make sure you're reading :)
547 die "Please make sure you edit your config file completely."
548
549
550 ##### MODULES #####
551
552 # Below are various settings for the modules included with Eggdrop.
553 # PLEASE READ AND EDIT THEM CAREFULLY, even if you're an old hand at
554 # Eggdrop, things change.
555
556 # This path specifies the path were Eggdrop should look for its modules.
557 # If you run the bot from the compilation directory, you will want to set
558 # this to "". If you use 'make install' (like all good kiddies do ;), this
559 # is a fine default. Otherwise, use your head :)
560 set mod-path "modules/"
561
562
563 #### BLOWFISH MODULE ####
564
565 # IF YOU DON'T READ THIS YOU MAY RENDER YOUR USERFILE USELESS LATER
566 # Eggdrop encrypts its userfile, so users can have secure passwords.
567 # Please note that when you change your encryption method later (i.e.
568 # using other modules like a md5 module), you can't use your current
569 # userfile anymore. Eggdrop will not start without an encryption module.
570 loadmodule blowfish
571
572
573 #### DNS MODULE ####
574
575 # This module provides asynchronous dns support. This will avoid long
576 # periods where the bot just hangs there, waiting for a hostname to
577 # resolve, which will often let it timeout on all other connections.
578 loadmodule dns
579
580 # In case your bot has trouble finding dns servers or you want to use
581 # specific ones, you can set them here. The value is a list of dns servers.
582 # The order doesn't matter. You can also specify a non-standard port.
583 # The default is to use the system specified dns servers. You don't need to
584 # modify this setting normally.
585 #set dns-servers "8.8.8.8 8.8.4.4"
586
587 # Specify how long should the DNS module cache replies at maximum. The value
588 # must be in seconds.
589 # Note that it will respect the TTL of the reply and this is just an upper
590 # boundary.
591 set dns-cache 86400
592
593 # Specify how long should the DNS module cache negative replies (NXDOMAIN,
594 # DNS Lookup failed). The value must be in seconds.
595 set dns-negcache 600
596
597 # How many times should the DNS module resend the query for a given domain
598 # if it receives no reply?
599 set dns-maxsends 4
600
601 # Specify how long should the DNS module wait for a reply before resending the
602 # query. The value must be in seconds.
603 set dns-retrydelay 3
604
605 #### CHANNELS MODULE ####
606
607 # This module provides channel related support for the bot. Without it,
608 # you won't be able to make the bot join a channel or save channel
609 # specific userfile information.
610 loadmodule channels
611
612 # Enter here the filename where dynamic channel settings are stored.
613 set chanfile "LamestBot.chan"
614
615 # Set this setting to 1 if you want your bot to expire bans/exempts/invites set
616 # by other opped bots on the channel.
617 set force-expire 0
618
619 # Set this setting to 1 if you want your bot to share user greets with other
620 # bots on the channel if sharing user data.
621 set share-greet 0
622
623 # Set this setting to 1 if you want to allow users to store an info line.
624 set use-info 1
625
626 # Set this setting to 1 if you want to allow both +p and +s channel modes
627 # to be enforced at the same time by the chanmode channel setting.
628 # Make sure your server supports +ps mixing or you may get endless mode
629 # floods.
630 set allow-ps 0
631
632 # The following settings are used as default values when you .+chan #chan or .tcl
633 # channel add #chan. Look below for explanation of every option.
634
635 set global-flood-chan 15:60
636 set global-flood-deop 3:10
637 set global-flood-kick 3:10
638 set global-flood-join 5:60
639 set global-flood-ctcp 3:60
640 set global-flood-nick 5:60
641 set global-aop-delay 5:30
642 set global-idle-kick 0
643 set global-chanmode "nt"
644 set global-stopnethack-mode 0
645 set global-revenge-mode 0
646 set global-ban-type 3
647 set global-ban-time 120
648 set global-exempt-time 60
649 set global-invite-time 60
650
651 set global-chanset {
652 -autoop -autovoice
653 -bitch +cycle
654 +dontkickops +dynamicbans
655 +dynamicexempts +dynamicinvites
656 -enforcebans +greet
657 -inactive -nodesynch
658 -protectfriends +protectops
659 -revenge -revengebot
660 -secret -seen
661 +shared -statuslog
662 +userbans +userexempts
663 +userinvites -protecthalfops
664 -autohalfop -static
665 }
666
667 # chanmode +/-<modes>
668 # This setting makes the bot enforce channel modes. It will always add
669 # the +<modes> and remove the -<modes> modes.
670 #
671 # idle-kick 0
672 # This setting will make the bot check every minute for idle
673 # users. Set this to 0 to disable idle check.
674 #
675 # stopnethack-mode 0
676 # This setting will make the bot de-op anyone who enters the channel
677 # with serverops. There are seven different modes for this settings:
678 # 0 turn off
679 # 1 isoptest (allow serverop if registered op)
680 # 2 wasoptest (allow serverop if op before split)
681 # 3 allow serverop if isop or wasop
682 # 4 allow serverop if isop and wasop.
683 # 5 If the channel is -bitch, see stopnethack-mode 3
684 # If the channel is +bitch, see stopnethack-mode 1
685 # 6 If the channel is -bitch, see stopnethack-mode 2
686 # If the channel is +bitch, see stopnethack-mode 4
687 #
688 # revenge-mode 0
689 # This settings defines how the bot should punish bad users when
690 # revenging. There are four possible settings:
691 # 0 Deop the user.
692 # 1 Deop the user and give them the +d flag for the channel.
693 # 2 Deop the user, give them the +d flag for the channel, and kick them.
694 # 3 Deop the user, give them the +d flag for the channel, kick, and ban them.
695 #
696 # ban-type 3
697 # This setting defines what type of bans should eggdrop place for +k users or
698 # when revenge-mode is 3.
699 # Available types are:
700 # 0 *!user@host
701 # 1 *!*user@host
702 # 2 *!*@host
703 # 3 *!*user@*.host
704 # 4 *!*@*.host
705 # 5 nick!user@host
706 # 6 nick!*user@host
707 # 7 nick!*@host
708 # 8 nick!*user@*.host
709 # 9 nick!*@*.host
710 # You can also specify types from 10 to 19 which correspond to types
711 # 0 to 9, but instead of using a * wildcard to replace portions of the
712 # host, only numbers in hostnames are replaced with the '?' wildcard.
713 # Same is valid for types 20-29, but instead of '?', the '*' wildcard
714 # will be used.
715 #
716 # ban-time 120
717 # Set here how long temporary bans will last (in minutes). If you
718 # set this setting to 0, the bot will never remove them.
719 #
720 # exempt-time 60
721 # Set here how long temporary exempts will last (in minutes). If you
722 # set this setting to 0, the bot will never remove them. The bot will
723 # check the exempts every X minutes, but will not remove the exempt if
724 # a ban is set on the channel that matches that exempt. Once the ban is
725 # removed, then the exempt will be removed the next time the bot checks.
726 # Please note that this is an IRCnet feature.
727 #
728 # invite-time 60
729 # Set here how long temporary invites will last (in minutes). If you
730 # set this setting to 0, the bot will never remove them. The bot will
731 # check the invites every X minutes, but will not remove the invite if
732 # a channel is set to +i. Once the channel is -i then the invite will be
733 # removed the next time the bot checks. Please note that this is an IRCnet
734 # feature.
735 #
736 # aop-delay (minimum:maximum)
737 # This is used for autoop, autohalfop, autovoice. If an op or voice joins a
738 # channel while another op or voice is pending, the bot will attempt to put
739 # both modes on one line.
740 # aop-delay 0 No delay is used.
741 # aop-delay X An X second delay is used.
742 # aop-delay X:Y A random delay between X and Y is used.
743 #
744 # need-op { putserv "PRIVMSG #lamest :op me cos i'm lame!" }
745 # This setting will make the bot run the script enclosed in brackets
746 # if it does not have ops. This must be shorter than 120 characters.
747 # If you use scripts like getops.tcl or botnetop.tcl, you don't need
748 # to set this setting.
749 #
750 # need-invite { putserv "PRIVMSG #lamest :let me in!" }
751 # This setting will make the bot run the script enclosed in brackets
752 # if it needs an invite to the channel. This must be shorter than 120
753 # characters. If you use scripts like getops.tcl or botnetop.tcl, you
754 # don't need to set this setting.
755 #
756 # need-key { putserv "PRIVMSG #lamest :let me in!" }
757 # This setting will make the bot run the script enclosed in brackets
758 # if it needs the key to the channel. This must be shorter than 120
759 # characters. If you use scripts like getops.tcl or botnetop.tcl, you
760 # don't need to set this setting
761 #
762 # need-unban { putserv "PRIVMSG #lamest :let me in!" }
763 # This setting will make the bot run the script enclosed in brackets
764 # if it needs to be unbanned on the channel. This must be shorter than
765 # 120 characters. If you use scripts like getops.tcl or botnetop.tcl,
766 # you don't need to set this setting
767 #
768 # need-limit { putserv "PRIVMSG #lamest :let me in!" }
769 # This setting will make the bot run the script enclosed in brackets
770 # if it needs the limit to be raised on the channel. This must be
771 # shorter than 120 characters. If you use scripts like getops.tcl or
772 # botnetop.tcl, you don't need to set this setting
773 #
774 # flood-chan 15:60
775 # Set here how many channel messages in how many seconds from one
776 # host constitutes a flood. Setting this to 0 or 0:0 disables
777 # flood protection for the channel.
778 #
779 # flood-deop 3:10
780 # Set here how many deops in how many seconds from one host constitutes
781 # a flood. Setting this to 0 or 0:0 disables deop flood protection for
782 # the channel.
783 #
784 # flood-kick 3:10
785 # Set here how many kicks in how many seconds from one host constitutes
786 # a flood. Setting this to 0 or 0:0 disables kick flood protection for
787 # the channel.
788 #
789 # flood-join 5:60
790 # Set here how many joins in how many seconds from one host constitutes
791 # a flood. Setting this to 0 or 0:0 disables join flood protection for
792 # the channel.
793 #
794 # flood-ctcp 3:60
795 # Set here how many channel ctcps in how many seconds from one host
796 # constitutes a flood. Setting this to 0 or 0:0 disables ctcp flood
797 # protection for the channel.
798 #
799 # flood-nick 5:60
800 # Set here how many nick changes in how many seconds from one host
801 # constitutes a flood. Setting this to 0 or 0:0 disables nick flood
802 # protection for the channel.
803 #
804 # A complete list of all available channel settings:
805 #
806 # enforcebans
807 # When a ban is set, kick people who are on the channel and match
808 # the ban?
809 #
810 # dynamicbans
811 # Only activate bans on the channel when necessary? This keeps
812 # the channel's ban list from getting excessively long. The bot
813 # still remembers every ban, but it only activates a ban on the
814 # channel when it sees someone join who matches that ban.
815 #
816 # userbans
817 # Allow bans to be made by users directly? If turned off, the bot
818 # will require all bans to be made through the bot's console.
819 #
820 # dynamicexempts
821 # Only activate exempts on the channel when necessary? This keeps
822 # the channel's exempt list from getting excessively long. The bot
823 # still remembers every exempt, but it only activates a exempt on
824 # the channel when it sees a ban set that matches the exempt. The
825 # exempt remains active on the channel for as long as the ban is
826 # still active.
827 #
828 # userexempts
829 # Allow exempts to be made by users directly? If turned off, the
830 # bot will require all exempts to be made through the bot's console.
831 #
832 # dynamicinvites
833 # Only activate invites on the channel when necessary? This keeps
834 # the channel's invite list from getting excessively long. The bot
835 # still remembers every invite, but the invites are only activated
836 # when the channel is set to invite only and a user joins after
837 # requesting an invite. Once set, the invite remains until the
838 # channel goes to -i.
839 #
840 # userinvites
841 # Allow invites to be made by users directly? If turned off, the
842 # bot will require all invites to be made through the bot's console.
843 #
844 # autoop
845 # Op users with the +o flag as soon as they join the channel?
846 # This is insecure and not recommended.
847 #
848 # autohalfop
849 # Halfop users with the +l flag as soon as they join the channel?
850 # This is insecure and not recommended.
851 #
852 # bitch
853 # Only let users with +o) flag be opped on the channel?
854 #
855 # greet
856 # Say a user's info line when they join the channel?
857 #
858 # protectops
859 # Re-op a user with the +o flag if they get deopped?
860 #
861 # protecthalfops
862 # Re-halfop a user with the +l flag if they get dehalfopped?
863 #
864 # protectfriends
865 # Re-op a user with the +f flag if they get deopped?
866 #
867 # statuslog
868 # Log the channel status line every 5 minutes? This shows the bot's
869 # status on the channel (op, voice, etc.), the channel's modes, and
870 # the number of +m/+o/+v/+n/+b/+e/+I users on the channel. A sample
871 # status line follows:
872 #
873 # [01:40] @#lamest (+istn) : [m/1 o/1 v/4 n/7 b/1 e/5 I/7]
874 #
875 # revenge
876 # Remember people who deop/kick/ban the bot, valid ops, or friends
877 # and punish them? Users with the +f flag are exempt from revenge.
878 #
879 # revengebot
880 # This is similar to to the 'revenge' option, but it only triggers
881 # if a bot gets deopped, kicked or banned.
882 #
883 # autovoice
884 # Voice users with the +v flag when they join the channel?
885 #
886 # secret
887 # Prevent this channel from being listed on the botnet?
888 #
889 # shared
890 # Share channel-related user info for this channel?
891 #
892 # cycle
893 # Cycle the channel when it has no ops?
894 #
895 # dontkickops
896 # Do you want the bot not to be able to kick users who have the +o
897 # flag, letting them kick-flood for instance to protect the channel
898 # against clone attacks.
899 #
900 # inactive
901 # This prevents the bot from joining the channel (or makes it leave
902 # the channel if it is already there). It can be useful to make the
903 # bot leave a channel without losing its settings, channel-specific
904 # user flags, channel bans, and without affecting sharing.
905 #
906 # seen
907 # Respond to seen requests in the channel? The seen module must be
908 # loaded for this to work.
909 #
910 # nodesynch
911 # Allow non-ops to perform channel modes? This can stop the bot from
912 # fighting with services such as ChanServ, or from kicking IRCops when
913 # setting channel modes without having ops.
914 #
915 # static
916 # Allow only permanent owners to remove the channel?
917
918 # To add a channel to eggdrop, please enter the bot's partyline and type
919 # .+chan #channel. Check also .help chanset and .help chaninfo.
920 # You can still add a channel here and it will be saved if you have a
921 # chanfile. We recommend you to use the partyline though.
922 #
923 #channel add #lamest
924
925
926 #### SERVER MODULE ####
927
928 # This module provides the core server support. You have to load this
929 # if you want your bot to come on IRC. Not loading this is equivalent
930 # to the old NO_IRC define.
931 loadmodule server
932
933 # Control certificate verification for irc servers. For a description of the
934 # possible values, look at the SSL SETTINGS section above.
935 #set ssl-verify-server 0
936
937 # What is your network?
938 # 0 = EFnet
939 # 1 = IRCnet
940 # 2 = Undernet
941 # 3 = DALnet
942 # 4 = +e/+I/max-modes 20 Hybrid
943 # 5 = Others
944 set net-type 0
945
946 # Set the nick the bot uses on IRC, and on the botnet unless you specify a
947 # separate botnet-nick, here.
948 set nick "Lamestbot"
949
950 # Set the alternative nick which the bot uses on IRC if the nick specified
951 # by 'set nick' is unavailable. All '?' characters will be replaced by random
952 # numbers.
953 set altnick "Llamab?t"
954
955 # Set what should be displayed in the real-name field for the bot on IRC.
956 # This can not be blank, it has to contain something.
957 set realname "/msg LamestBot hello"
958
959 # This is a Tcl script to be run immediately after connecting to a server.
960 bind evnt - init-server evnt:init_server
961
962 proc evnt:init_server {type} {
963 global botnick
964 putquick "MODE $botnick +i-ws"
965 }
966
967 # Set the default port which should be used if none is specified with
968 # '.jump' or in 'set servers'.
969 set default-port 6667
970
971 # This is the bot's server list. The bot will start at the first server listed,
972 # and cycle through them whenever it gets disconnected. You need to change these
973 # servers to YOUR network's servers.
974 #
975 # The format is:
976 # server[:port[:password]]
977 # Prefix the port with a plus sign to attempt a SSL connection:
978 # server:+port[:password]
979 # If you need to specify a numeric server IPv6 address, use following format:
980 # ip,[port[:password]]
981 #
982 # Both the port and password fields are optional; however, if you want to set a
983 # password you must also set a port. If a port isn't specified it will default to
984 # your default-port setting.
985 set servers {
986 you.need.to.change.this:6667
987 another.example.com:7000:password
988 2001:db8:618:5c0:263::,6669:password
989 ssl.example.net:+6697
990 }
991
992 # Number of seconds to wait between transmitting queued lines to the server.
993 # Lower this value at your own risk. ircd is known to start flood control
994 # at 512 bytes/2 seconds.
995 set msg-rate 2
996
997 # This setting makes the bot try to get his original nickname back if its
998 # primary nickname is already in use.
999 set keep-nick 1
1000
1001
1002 # This setting makes the bot squelch the error message when rejecting a DCC
1003 # CHAT, SEND or message command. Normally, Eggdrop notifies the user that the
1004 # command has been rejected because they don't have access. Note that sometimes
1005 # IRC server operators detect bots that way.
1006 set quiet-reject 1
1007
1008 # If you want your bot to answer lower case ctcp requests (non rfc-
1009 # compliant), set this setting to 1. mIRC will do this, most other
1010 # clients will not.
1011 set lowercase-ctcp 0
1012
1013 # Set how many ctcps should be answered at once.
1014 set answer-ctcp 3
1015
1016 # Set here how many msgs in how many seconds from one host constitutes
1017 # a flood. If you set this to 0:0, msg flood protection will be disabled.
1018 set flood-msg 5:60
1019
1020 # Set here how many ctcps in how many seconds from one host constitutes
1021 # a flood. If you set this to 0:0, ctcp flood protection will be disabled.
1022 set flood-ctcp 3:60
1023
1024 # This settings makes the bot cycle forever through the server list until
1025 # it successfully connects to one.
1026 set never-give-up 1
1027
1028 # This setting defines how long Eggdrop should wait before moving from one
1029 # server to another on disconnect. If you set 0 here, Eggdrop will not wait
1030 # at all and will connect instantly. Setting this too low could result in
1031 # your bot being K:Lined.
1032 set server-cycle-wait 60
1033
1034 # Set here how long Eggdrop should wait for a response when connecting to a
1035 # server before giving up and moving on to next server.
1036 set server-timeout 60
1037
1038 # If the number of servers on the net gets below this number, the bot
1039 # will jump to a new server (it will assume it's on the losing end of
1040 # a netsplit). Set this to 0 to turn off. If your bot is running on
1041 # any major IRC network, this should probably be turned off.
1042 set servlimit 0
1043
1044 # Set this to 1 if Eggdrop should check for stoned servers? (where the
1045 # server connection has died, but Eggdrop hasn't been notified yet).
1046 set check-stoned 1
1047
1048 # If you want your bot to exit the server if it receives an ERROR message,
1049 # set this to 1.
1050 set serverror-quit 1
1051
1052 # Set here the maximum number of lines to queue to the server. If you're
1053 # going to dump large chunks of text to people over IRC, you will probably
1054 # want to raise this. 300 is fine for most people though.
1055 set max-queue-msg 300
1056
1057 # If you want Eggdrop to trigger binds for ignored users, set this to 1.
1058 set trigger-on-ignore 0
1059
1060 # This setting configures PUBM and MSGM binds to be exclusive of PUB and MSG
1061 # binds. This means if a MSGM bind with the mask "*help*" exists and is
1062 # triggered, any MSG bindings with "help" in their mask will not be
1063 # triggered. Don't enable this unless you know what you are doing!
1064 set exclusive-binds 0
1065
1066 # Allow identical messages in the mode queue?
1067 set double-mode 1
1068
1069 # Allow identical messages in the server queue?
1070 set double-server 1
1071
1072 # Allow identical messages in the help queue?
1073 set double-help 1
1074
1075 # This optimizes the kick queue. It also traces nick changes and parts in
1076 # the channel and changes the kick queue accordingly. There are three
1077 # different options for this setting:
1078 # 0 = Turn it off.
1079 # 1 = Optimize the kick queue by summarizing kicks.
1080 # 2 = Trace nick changes and parts on the channel and change the queue
1081 # accordingly. For example, bot will not try to kick users who have
1082 # already parted the channel.
1083 # ATTENTION: Setting 2 is very CPU intensive.
1084 set optimize-kicks 1
1085
1086 # If your network supports more recipients per command then 1, you can
1087 # change this behavior here. Set this to the number of recipients per
1088 # command, or set this to 0 for unlimited.
1089 set stack-limit 4
1090
1091 ### SERVER MODULE - OTHER NETWORKS (net-type 5) ###
1092
1093 # This settings defines how umode +r is understood by Eggdrop. Some networks
1094 # use +r to indicate a restricted connection. If this is your case, and you
1095 # want your bot to leave restricted servers and jump to the next server on its
1096 # list, then set it to 1.
1097 #set check-mode-r 1
1098
1099 # This setting allows you to specify the maximum nick-length supported by your
1100 # network. The default setting is 9. The maximum supported length by Eggdrop
1101 # is 32.
1102 #set nick-len 9
1103
1104 #### CTCP MODULE ####
1105
1106 # This module provides the normal ctcp replies that you'd expect.
1107 # Without it loaded, CTCP CHAT will not work. The server module
1108 # is required for this module to function.
1109 loadmodule ctcp
1110
1111 # Set here how the ctcp module should answer ctcps. There are 3 possible
1112 # operating modes:
1113 # 0: Normal behavior is used.
1114 # 1: The bot ignores all ctcps, except for CHAT and PING requests
1115 # by users with the +o flag.
1116 # 2: Normal behavior is used, however the bot will not answer more
1117 # than X ctcps in Y seconds (defined by 'set flood-ctcp').
1118 set ctcp-mode 0
1119
1120 # There are also several variables to help make your bot less noticeable.
1121 # They are: ctcp-version, ctcp-finger, and ctcp-userinfo. You can use set to set
1122 # them to values you'd like.
1123
1124
1125 #### IRC MODULE ####
1126
1127 # This module provides basic IRC support for your bot. You have to
1128 # load this if you want your bot to come on IRC. The server and channels
1129 # modules must be loaded for this module to function.
1130 loadmodule irc
1131
1132 # Set this to 1 if you want to bounce all server bans.
1133 set bounce-bans 0
1134
1135 # Set this to 1 if you want to bounce all server exemptions (+e modes).
1136 # This is disabled if use-exempts is disabled.
1137 set bounce-exempts 0
1138
1139 # Set this to 1 if you want to bounce all server invitations (+I modes).
1140 # This is disabled if use-invites is disabled.
1141 set bounce-invites 0
1142
1143 # Set this to 1 if you want to bounce all server modes.
1144 set bounce-modes 0
1145
1146 # Set here the maximum number of bans you want the bot to set on a channel.
1147 # Eggdrop will not place any more bans if this limit is reached. Undernet
1148 # currently allows 45 bans, IRCnet allows 30, EFnet allows 100, and DALnet
1149 # allows 100.
1150 set max-bans 30
1151
1152 # Set here the maximum number of exempts you want Eggdrop to set on a channel.
1153 # Eggdrop will not place any more exempts if this limit is reached.
1154 set max-exempts 20
1155
1156 # Set here the maximum number of invites you want Eggdrop to set on a channel.
1157 # Eggdrop will not place any more invites if this limit is reached.
1158 set max-invites 20
1159
1160 # There is a global limit for +b/+e/+I modes. This limit should be set to
1161 # the same value as max-bans for networks that do not support +e/+I.
1162 set max-modes 30
1163
1164 # The following settings should be left commented unless the default values
1165 # are being overridden. By default, exempts and invites are on for EFnet and
1166 # IRCnet, but off for all other large networks. This behavior can be modified
1167 # with the following 2 flags. If your network doesn't support +e/+I modes then
1168 # you will be unable to use these features.
1169 #
1170 # Do you want to enable exempts (+e modes)?
1171 #set use-exempts 0
1172
1173 # Do you want to enable invites (+I modes)?
1174 #set use-invites 0
1175
1176 # Set this to 1 if you want the bot to kick for control character/ctcp
1177 # avalanches to a channel. Remember that if it does, it won't ban them.
1178 # This can start kick floods.
1179 set kick-fun 0
1180
1181 # Set this to 1 if you want the bot to ban for control character/ctcp
1182 # avalanches to a channel. This can prevent kick floods, but it also can
1183 # fill the banlist.
1184 set ban-fun 0
1185
1186 # If you want people to be able to add themselves to the bot's userlist
1187 # with the default userflags (defined above in the config file) via the
1188 # 'hello' msg command, set this to 1.
1189 set learn-users 0
1190
1191 # Set here the time (in seconds) to wait for someone to return from a netsplit
1192 # (i.e. wasop will expire afterwards). Set this to 1500 on IRCnet since its
1193 # nick delay stops after 30 minutes.
1194 set wait-split 600
1195
1196 # Set here the time (in seconds) that someone must have been off-channel
1197 # before re-displaying their info line.
1198 set wait-info 180
1199
1200 # Set this to the maximum number of bytes to send in the arguments
1201 # of modes sent to the server. Most servers default this to 200.
1202 set mode-buf-length 200
1203
1204 # Many IRCops find bots by seeing if they reply to 'hello' in a msg.
1205 # You can change this to another word by un-commenting the following
1206 # two lines and changing "myword" to the word wish to use instead of
1207 # 'hello'. It must be a single word.
1208 #unbind msg - hello *msg:hello
1209 #bind msg - myword *msg:hello
1210
1211 # Many takeover attempts occur due to lame users blindly /msg ident'ing to
1212 # the bot and attempting to guess passwords. We now unbind this command by
1213 # default to discourage them. You can enable these commands by commenting the
1214 # following two lines.
1215 unbind msg - ident *msg:ident
1216 unbind msg - addhost *msg:addhost
1217
1218 # Some IRC servers are using some non-standard op-like channel prefixes/modes.
1219 # Define them here so the bot can recognize them. Just "@" should be fine for
1220 # most networks. Un-comment the second line for some UnrealIRCds.
1221
1222 set opchars "@"
1223 #set opchars "@&~"
1224
1225 # If you are so lame you want the bot to display peoples info lines, even
1226 # when you are too lazy to add their chanrecs to a channel, set this to 1.
1227 # *NOTE* This means *every* user with an info line will have their info
1228 # line displayed on EVERY channel they join (provided they have been gone
1229 # longer than wait-info).
1230 set no-chanrec-info 0
1231
1232 ### IRC MODULE - IRCnet SPECIFIC FEATURES (net-type 1) ###
1233
1234 # Attention: Use these settings *only* if you set 'net-type' to 1!
1235
1236 # At the moment, the current IRCnet IRCd version (2.10) doesn't support the
1237 # mixing of b, o and v modes with e and I modes. This might be changed in the
1238 # future, so use 1 at the moment for this setting.
1239 set prevent-mixing 1
1240
1241 ### IRC MODULE - OTHER NETWORKS (net-type 5) ###
1242
1243 # Attention: Use these settings *only* if you set 'net-type' to 5!
1244
1245 # If your network supports more users per kick command then 1, you can
1246 # change this behavior here. Set this to the number of users to kick at
1247 # once, or set this to 0 for all at once.
1248 #set kick-method 1
1249
1250 # Some networks allow you to stack lots of channel modes into one line.
1251 # They're all guaranteed to support at least 3, so that's the default.
1252 # If you know your network supports more, you may want to adjust this.
1253 # This setting is limited to 6, although if you want to use a higher value,
1254 # you can modify this by changing the value of MODES_PER_LINE_MAX in
1255 # src/chan.h and recompiling the bot.
1256 #set modes-per-line 3
1257
1258 # Some networks don't include the +l limit and +k or -k key modes
1259 # in the modes-per-line (see above) limitation. Set include-lk to 0 for
1260 # these networks.
1261 #set include-lk 1
1262
1263 # Set this to 1 if your network uses IRCu2.10.01 specific /who requests.
1264 # Eggdrop can, therefore, ask only for exactly what's needed.
1265 #set use-354 0
1266
1267 # If your network doesn't use rfc 1459 compliant string matching routines,
1268 # set this to 0.
1269 #set rfc-compliant 1
1270
1271
1272 #### TRANSFER MODULE ####
1273
1274 # The transfer module provides DCC SEND/GET support and userfile transfer
1275 # support for userfile sharing. Un-comment the next line to load it if you
1276 # need this functionality.
1277 #loadmodule transfer
1278
1279 # Set here the maximum number of simultaneous downloads to allow for
1280 # each user.
1281 set max-dloads 3
1282
1283 # Set here the block size for dcc transfers. ircII uses 512 bytes,
1284 # but admits that it may be too small. 1024 is standard these days.
1285 # 0 is turbo-dcc (recommended).
1286 set dcc-block 0
1287
1288 # Enable this setting if you want to copy files into the /tmp directory
1289 # before sending them. This is useful on most systems for file stability,
1290 # but if your directories are NFS mounted, it's a pain, and you'll want
1291 # to set this to 0. If you are low on disk space, you may also want to
1292 # set this to 0.
1293 set copy-to-tmp 1
1294
1295 # Set here the time (in seconds) to wait before an inactive transfer times out.
1296 set xfer-timeout 30
1297
1298
1299 #### SHARE MODULE ####
1300
1301 # This module provides userfile sharing support between two directly
1302 # linked bots. The transfer and channels modules are required for this
1303 # module to correctly function. Un-comment the following line to load
1304 # the share module.
1305 #loadmodule share
1306
1307 # Settings in this section must be un-commented before setting.
1308
1309 # When two bots get disconnected, this setting allows them to create a
1310 # resync buffer which saves all changes done to the userfile during
1311 # the disconnect. When they reconnect, they will not have to transfer
1312 # the complete user file, but, instead, just send the resync buffer.
1313 #
1314 # NOTE: This has been known to cause loss of channel flags and other
1315 # problems. Using this setting is not recommended.
1316 #set allow-resync 0
1317
1318 # This setting specifies how long to hold another bots resync data
1319 # before flushing it.
1320 #set resync-time 900
1321
1322 # When sharing user lists, DON'T ACCEPT global flag changes from other bots?
1323 # NOTE: The bot will still send changes made on the bot, it just won't accept
1324 # any global flag changes from other bots. This overrides the private-globals
1325 # setting (below).
1326 #set private-global 0
1327
1328 # When sharing user lists, if private-global isn't set, which global flag
1329 # changes from other bots should be ignored?
1330 #set private-globals "mnot"
1331
1332 # When sharing user lists, don't accept ANY userfile changes from other
1333 # bots? Paranoid people should use this feature on their hub bot. This
1334 # will force all userlist changes to be made via the hub.
1335 #set private-user 0
1336
1337 # This setting makes the bot discard its own bot records in favor of
1338 # the ones sent by the hub.
1339 # NOTE: No passwords or botflags are shared, only ports and
1340 # address are added to sharing procedure. This only works with hubs that
1341 # are v1.5.1 or higher.
1342 #set override-bots 0
1343
1344
1345 #### COMPRESS MODULE ####
1346
1347 # This module provides provides support for file compression. This allows the
1348 # bot to transfer compressed user files and therefore save a significant amount
1349 # of bandwidth. The share module must be loaded to load this module. Un-comment
1350 # the following line to the compress module.
1351 #loadmodule compress
1352
1353 # Allow compressed sending of user files? The user files are compressed with
1354 # the compression level defined in `compress-level'.
1355 set share-compressed 1
1356
1357 # This is the default compression level used. These levels are the same as
1358 # those used by GNU gzip.
1359 #set compress-level 9
1360
1361
1362 #### FILESYSTEM MODULE ####
1363
1364 # This module provides an area within the bot where users can store and
1365 # manage files. With this module, the bot is usable as a file server. The
1366 # transfer module is required for this module to function. Un-comment
1367 # the following line to load the filesys module.
1368 #loadmodule filesys
1369
1370 # Set here the 'root' directory for the file system.
1371 set files-path "/home/mydir/filesys"
1372
1373 # If you want to allow uploads, set this to the directory uploads
1374 # should be put into. Set this to "" if you don't want people to
1375 # upload files to your bot.
1376 set incoming-path "/home/mydir/filesys/incoming"
1377
1378 # If you don't want to have a central incoming directory, but instead
1379 # want uploads to go to the current directory that a user is in, set
1380 # this setting to 1.
1381 set upload-to-pwd 0
1382
1383 # Eggdrop creates a '.filedb' file in each subdirectory of your file area
1384 # to keep track of its own file system information. If you can't do that (for
1385 # example, if the dcc path isn't owned by you, or you just don't want it to do
1386 # that) specify a path here where you'd like all of the database files to be
1387 # stored instead.
1388 set filedb-path ""
1389
1390 # Set here the maximum number of people that can be in the file area at once.
1391 # Setting this to 0 makes it effectively infinite.
1392 set max-file-users 20
1393
1394 # Set here the maximum allowable file size that will be received (in KB).
1395 # Setting this to 0 makes it effectively infinite.
1396 set max-filesize 1024
1397
1398
1399 #### NOTES MODULE ####
1400
1401 # This module provides support for storing of notes for users from each other.
1402 # Note sending between currently online users is supported in the core, this is
1403 # only for storing the notes for later retrieval.
1404 loadmodule notes
1405
1406 # Set here the filename where private notes between users are stored.
1407 set notefile "LamestBot.notes"
1408
1409 # Set here the maximum number of notes to allow to be stored for each user
1410 # (to prevent flooding).
1411 set max-notes 50
1412
1413 # Set here how long (in days) to store notes before expiring them.
1414 set note-life 60
1415
1416 # Set this to 1 if you want to allow users to specify a forwarding address
1417 # for forwarding notes to another account on another bot.
1418 set allow-fwd 0
1419
1420 # Set this to 1 if you want the bot to let people know hourly if they have
1421 # any notes.
1422 set notify-users 0
1423
1424 # Set this to 1 if you want the bot to let people know on join if they have
1425 # any notes.
1426 set notify-onjoin 1
1427
1428 # Comment out this next line. Otherwise, your bot won't start.
1429 die "You didn't edit your config file completely like you were told, did you?"
1430
1431
1432 #### CONSOLE MODULE ####
1433
1434 # This module provides storage of console settings when you exit the
1435 # bot or type .store on the partyline.
1436 loadmodule console
1437
1438 # Save users console settings automatically? Otherwise, they have
1439 # to use the .store command.
1440 set console-autosave 1
1441
1442 # If a user doesn't have any console settings saved, which channel
1443 # do you want them automatically put on?
1444 set force-channel 0
1445
1446 # Enable this setting if a user's global info line should be displayed
1447 # when they join a botnet channel.
1448 set info-party 0
1449
1450
1451 #### WOOBIE MODULE ####
1452
1453 # This is for demonstrative purposes only. If you are looking for starting
1454 # point in writing modules, woobie is the right thing.
1455 #loadmodule woobie
1456
1457
1458 #### SEEN MODULE ####
1459
1460 # This module provides very basic seen commands via msg, on channel or via dcc.
1461 # This module works only for users in the bot's userlist. If you are looking for
1462 # a better and more advanced seen module, try the gseen module by G'Quann. You
1463 # can find it at http://www.kreativrauschen.com/gseen.mod/.
1464 #loadmodule seen
1465
1466
1467 #### ASSOC MODULE ####
1468
1469 # This module provides assoc support, i.e. naming channels on the botnet.
1470 # You can load it by un-commenting the following line.
1471 #loadmodule assoc
1472
1473
1474 #### WIRE MODULE ####
1475
1476 # This module provides all the standard .wire commands via dcc. It is an
1477 # encrypted partyline communication tool, compatible with wire.tcl. An
1478 # encryption module must be loaded to use this module. Un-comment the
1479 # following line to load the wire module.
1480 #loadmodule wire
1481
1482 #### UPTIME MODULE ####
1483
1484 # This module reports uptime statistics to http://uptime.eggheads.org.
1485 # Go look and see what your uptime is! It takes about 9 hours to show up,
1486 # so if your bot isn't listed, try again later. The server module must be
1487 # loaded for this module to function.
1488 #
1489 # Information sent to the server includes the bot's uptime, botnet-nick,
1490 # server, version, and IP address. This information is stored in a temporary
1491 # logfile for debugging purposes only. The only publicly available information
1492 # will be the bot's botnet-nick, version and uptime. If you do not wish for this
1493 # information to be sent, comment out the following line.
1494 loadmodule uptime
1495
1496 ##### SCRIPTS #####
1497
1498 # This is a good place to load scripts to use with your bot.
1499
1500 # This line loads script.tcl from the scripts directory inside your Eggdrop's
1501 # directory. All scripts should be put there, although you can place them where
1502 # you like as long as you can supply a fully qualified path to them.
1503 #
1504 # source scripts/script.tcl
1505
1506 source scripts/alltools.tcl
1507 source scripts/action.fix.tcl
1508
1509 # This script enhances Eggdrop's built-in dcc '.whois' command to allow all
1510 # users to '.whois' their own handle.
1511 source scripts/dccwhois.tcl
1512
1513 # This script provides many useful informational functions, like setting
1514 # users' URLs, e-mail address, ICQ numbers, etc. You can modify it to add
1515 # extra entries.
1516 source scripts/userinfo.tcl
1517 loadhelp userinfo.help
1518
1519 # Use this script for Tcl and Eggdrop backwards compatibility.
1520 # NOTE: This can also cause problems with some newer scripts.
1521 #source scripts/compat.tcl
1522
1523 # A few IRC networks (EFnet and Undernet) have added some simple checks to
1524 # prevent drones from connecting to the IRC network. While these checks are
1525 # fairly trivial, they will prevent your Eggdrop from automatically
1526 # connecting. In an effort to work-around these, we have developed a couple of
1527 # TCL scripts to automate the process.
1528
1529 if {[info exists net-type]} {
1530 switch -- ${net-type} {
1531 "0" {
1532 # EFnet
1533 source scripts/quotepong.tcl
1534 }
1535 "2" {
1536 # Undernet
1537 source scripts/quotepass.tcl
1538 }
1539 }
1540 }

webmaster@eggheads.org
ViewVC Help
Powered by ViewVC 1.1.23