/[cvs]/eggdrop1.8/eggdrop.conf
ViewVC logotype

Contents of /eggdrop1.8/eggdrop.conf

Parent Directory Parent Directory | Revision Log Revision Log | View Revision Graph Revision Graph


Revision 1.2 - (show annotations) (download)
Thu Aug 5 18:12:04 2010 UTC (8 years, 7 months ago) by pseudo
Branch: MAIN
Changes since 1.1: +30 -7 lines
Added new, full IPv6 support to eggdrop.

1 #! /path/to/executable/eggdrop
2 # ^- This should contain a fully qualified path to your Eggdrop executable.
3 #
4 # $Id: eggdrop.conf,v 1.1.1.1 2010/07/26 21:11:06 simple Exp $
5 #
6 # This is a sample Eggdrop configuration file which includes all possible
7 # settings that can be used to configure your bot.
8 #
9 # The pound signs (#) that you see at the beginning of some lines mean that
10 # the remainder of that line is a comment, or just for your information. By
11 # adding or deleting pound signs, you can comment or uncomment a setting,
12 # respectively.
13 #
14 # Arguments for a command or setting may be inclosed in <>'s or []'s in the
15 # example/description. Arguments in <>'s are required, while [] means optional.
16 #
17 # More detailed descriptions of all these settings can be found in
18 # doc/settings/.
19
20
21
22 ##### BASIC SETTINGS #####
23
24 # This setting defines the username the bot uses on IRC. This setting has
25 # no effect if an ident daemon is running on your bot's machine.
26 set username "lamest"
27
28 # This setting defines which contact person should be shown in .status,
29 # /msg help, and other places. You really should include this information.
30 set admin "Lamer <email: lamer@lamest.lame.org>"
31
32 # This setting is used only for info to share with others on your botnet.
33 # Set this to the IRC network your bot is connected to.
34 set network "I.didn't.edit.my.config.file.net"
35
36 # This setting defines which timezone is your bot in. It's used for internal
37 # routines as well as for logfile timestamping and scripting purposes.
38 # The timezone string specifies the name of the timezone and must be three
39 # or more alphabetic characters. For example, Central European Time(UTC+1)
40 # should be "CET".
41 set timezone "EST"
42
43 # The offset setting specifies the time value to be added to the local
44 # time to get Coordinated Universal Time (UTC aka GMT). The offset is
45 # positive if the local timezone is west of the Prime Meridian and
46 # negative if it is east. The value (in hours) must be between -23 and
47 # 23. For example, if the timezone is UTC+1, the offset is -1.
48 set offset "5"
49
50 # If you don't want to use the timezone setting for scripting purposes only,
51 # but instead everywhere possible, un-comment the following line.
52 #set env(TZ) "$timezone $offset"
53
54 # If you're using virtual hosting (your machine has more than 1 IP), you
55 # may want to specify the particular IP to bind to. You can specify either
56 # by hostname or by IP. Note that this is not used for listening. Use the
57 # 'listen-addr' variable to specify the listening address.
58 #set vhost4 "virtual.host.com"
59 #set vhost4 "99.99.0.0"
60
61 # IPv6 vhost to bind to for outgoing IPv6 connections. You can set it
62 # to any valid IPv6 address or hostname, resolving to an IPv6 address.
63 # Note that this is not used for listening. Use the 'listen-addr'
64 # variable to specify the listening address.
65 #set vhost6 "my.ipv6.host.com"
66 #set vhost6 "2001:db8::c001:b07"
67
68 # IPv4/IPv6 address (or hostname) to bind for listening. If you don't set
69 # this variable, eggdrop will listen on all available IPv4 or IPv6 interfaces,
70 # depending on the 'prefer-ipv6' variable (see below).
71 # Note that eggdrop will accept IPv4 connecions with IPv6 sockets too.
72 #set listen-addr "99.99.0.0"
73 #set listen-addr "2001:db8:618:5c0:263::"
74 #set listen-addr "virtual.host.com"
75
76 # Prefer IPv6 over IPv4 for connections and dns resolution?
77 # If the preferred protocol family is not supported, the other one
78 # will be tried.
79 set prefer-ipv6 0
80
81 # If you want to have your Eggdrop messages displayed in a language other
82 # than English, change this setting to match your preference. An alternative
83 # would be to set the environment variable EGG_LANG to that value.
84 #
85 # Languages included with Eggdrop: Danish, English, French, Finnish, German.
86 #addlang "english"
87
88
89 ##### LOG FILES #####
90
91 # Eggdrop is capable of logging various things, from channel chatter to
92 # commands people use on the bot and file transfers. Logfiles are normally
93 # kept for 24 hours. Afterwards, they will be renamed to "(logfile).yesterday".
94 # After 48 hours, they will be overwritten by the logfile of the next day.
95 #
96 # Events are logged by certain categories. This way, you can specify
97 # exactly what kind of events you want sent to various logfiles.
98 #
99 # Logfile flags:
100 # b - information about bot linking and userfile sharing
101 # c - commands
102 # d - misc debug information
103 # h - raw share traffic
104 # j - joins, parts, quits, and netsplits on the channel
105 # k - kicks, bans, and mode changes on the channel
106 # m - private msgs, notices and ctcps to the bot
107 # o - misc info, errors, etc (IMPORTANT STUFF)
108 # p - public text on the channel
109 # r - raw incoming server traffic
110 # s - server connects, disconnects, and notices
111 # t - raw botnet traffic
112 # v - raw outgoing server traffic
113 # w - wallops (make sure the bot sets +w in init-server)
114 # x - file transfers and file-area commands
115 #
116 # Note that modes d, h, r, t, and v can fill disk quotas quickly. There are
117 # also eight user-defined levels (1-8) which can be used by Tcl scripts.
118 #
119 # Each logfile belongs to a certain channel. Events of type 'k', 'j', and 'p'
120 # are logged to whatever channel they happened on. Most other events are
121 # currently logged to every channel. You can make a logfile belong to all
122 # channels by assigning it to channel "*".
123
124 # This is the maximum number of logfiles allowed. This setting can be
125 # increased; however, don't decrease it.
126 set max-logs 5
127
128 # This is the maximum size of your logfiles. Set it to 0 to disable.
129 # This value is in kilobytes, so '550' would mean cycle logs when it
130 # reaches the size of 550 kilobytes. Note that this only works if you
131 # have keep-all-logs 0 (OFF).
132 set max-logsize 0
133
134 # This could be good if you have had problem with the logfile filling
135 # your quota/hard disk or if you log +p and publish it to the web and
136 # need more up-to-date info. Note that this setting might increase the
137 # CPU usage of your bot (on the other hand it will decrease your mem usage).
138 set quick-logs 0
139
140 # This setting allows you the logging of raw incoming server traffic via
141 # console/log flag 'r', raw outgoing server traffic via console/log mode 'v',
142 # raw botnet traffic via console/log mode 't', and raw share traffic via
143 # console/log mode 'h'. These flags can create a large security hole,
144 # allowing people to see user passwords. This is now restricted to +n users
145 # only. Please choose your owners with care.
146 set raw-log 0
147
148 # This creates a logfile named eggdrop.log containing private msgs/ctcps,
149 # commands, errors, and misc. info from any channel.
150 logfile mco * "logs/eggdrop.log"
151
152 # This creates a logfile named lamest.log containing joins, parts,
153 # netsplits, kicks, bans, mode changes, and public chat on the
154 # channel #lamest.
155 #logfile jpk #lamest "logs/lamest.log"
156
157 # Use this feature to timestamp entries in the log file.
158 set log-time 1
159
160 # Set the following to the timestamp for the logfile entries. Popular times
161 # might be "[%H:%M]" (hour, min), or "[%H:%M:%S]" (hour, min, sec).
162 # Read `man strftime' for more formatting options. Keep it below 32 chars.
163 set timestamp-format {[%H:%M:%S]}
164
165 # If you want to keep your logfiles forever, turn this setting on. All
166 # logfiles will get suffix ".[day, 2 digits][month, 3 letters][year, 4 digits]".
167 # Note that your quota/hard-disk might be filled by this, so check your
168 # logfiles often and download them.
169 set keep-all-logs 0
170
171 # If keep-all-logs is 1, this setting will define the suffix of the logfiles.
172 # The default will result in a suffix like "04May2000". "%Y%m%d" will produce
173 # the often used yyyymmdd format. Read the strftime manpages for more options.
174 # NOTE: On systems which don't support strftime, the default format will
175 # be used _always_.
176 set logfile-suffix ".%d%b%Y"
177
178 # You can specify when Eggdrop should switch logfiles and start fresh. You
179 # must use military time for this setting. 300 is the default, and describes
180 # 03:00 (AM).
181 set switch-logfiles-at 300
182
183 # "Writing user file..." and "Writing channel file..." messages won't be logged
184 # anymore if this option is enabled. If you set it to 2, the "Backing up user
185 # file..." and "Backing up channel file..." messages will also not be logged.
186 # In addition to this, you can disable the "Switching logfiles..." and the new
187 # date message at midnight, by setting this to 3.
188 set quiet-save 0
189
190
191 ##### CONSOLE #####
192
193 # This is the default console mode. It uses the same event flags as the log
194 # files do. The console channel is automatically set to your "primary" channel,
195 # which is set in the modules section of the config file. Masters can change
196 # their console channel and modes with the '.console' command.
197
198 set console "mkcobxs"
199
200
201 ##### FILES AND DIRECTORIES #####
202
203 # Specify here the filename your userfile should be saved as.
204 set userfile "LamestBot.user"
205
206 # Specify here the filename Eggdrop will save its pid to. If no pidfile is
207 # specified, pid.(botnet-nick) will be used.
208 #set pidfile "pid.LamestBot"
209
210 # If you want your userfile to be sorted upon saving, enable this setting.
211 # This causes the bot to use a bit more CPU when saving the userfile.
212 set sort-users 0
213
214 # Specify here where Eggdrop should look for help files. Don't modify this
215 # setting unless you know what you're doing!
216 set help-path "help/"
217
218 # Specify here where Eggdrop should look for text files. This is used for
219 # certain Tcl and DCC commands.
220 set text-path "text/"
221
222 # Set here a place to store temporary files.
223 set temp-path "/tmp"
224
225 # The MOTD (Message Of The day) is displayed when people dcc chat or telnet
226 # to the bot. Look at doc/TEXT-SUBSTITUTIONS for options.
227 set motd "text/motd"
228
229 # This banner will be displayed on telnet connections. Look at
230 # doc/TEXT-SUBSTITUTIONS for options.
231 set telnet-banner "text/banner"
232
233 # This specifies what permissions the user, channel, and notes files should
234 # be set to. The octal values are the same as for the chmod system command.
235 #
236 # To remind you:
237 #
238 # u g o u g o u g o
239 # 0600 rw------- 0400 r-------- 0200 -w------- u - user
240 # 0660 rw-rw---- 0440 r--r----- 0220 -w--w---- g - group
241 # 0666 rw-rw-rw- 0444 r--r--r-- 0222 -w--w--w- o - others
242 #
243 # Note that the default 0600 is the most secure one and should only be changed
244 # if you need your files for shell scripting or other external applications.
245 set userfile-perm 0600
246
247
248 ##### BOTNET/DCC/TELNET #####
249
250 # Settings in this section should be unimportant for you until you deal
251 # with botnets (multiple Eggdrops connected together to maximize efficiency).
252 # You should read doc/BOTNET before modifying these settings.
253
254 # If you want to use a different nickname on the botnet than you use on
255 # IRC (i.e. if you're on an un-trusted botnet), un-comment the next line
256 # and set it to the nick you would like to use.
257 #set botnet-nick "LlamaBot"
258
259 # This opens a telnet port by which you and other bots can interact with the
260 # Eggdrop by telneting in.
261 #
262 # There are more options for the listen command in doc/tcl-commands.doc. Note
263 # that if you are running more than one bot on the same machine, you will want
264 # to space the telnet ports at LEAST 5 apart, although 10 is even better.
265 #
266 # Valid ports are typically anything between 1025 and 65535 assuming the
267 # port is not already in use.
268 #
269 # If you would like the bot to listen for users and bots in separate ports,
270 # use the following format:
271 #
272 # listen 3333 bots
273 # listen 4444 users
274 #
275 # If you wish to use only one port, use this format:
276 #
277 # listen 3333 all
278 #
279 # You need to un-comment this line and change the port number in order to open
280 # the listen port. You should not keep this set to 3333.
281 #listen 3333 all
282
283 # This setting defines whether or not people can boot users on the Eggdrop
284 # from other bots in your botnet. Valid settings are:
285 # 0 - allow *no* outside boots
286 # 1 - allow boots from sharebots
287 # 2 - allow any boots
288 set remote-boots 2
289
290 # This setting prohibits remote bots from telling your Eggdrop to unlink from
291 # share bots.
292 set share-unlinks 1
293
294 # This setting will drop telnet connections not matching a known host.
295 set protect-telnet 0
296
297 # This setting will make the bot ignore DCC chat requests which appear to
298 # have bogus information on the grounds that the user may have been trying
299 # to make the bot connect to somewhere that will get it into trouble, or
300 # that the user has a broken client, in which case the connect wouldn't work
301 # anyway.
302 set dcc-sanitycheck 0
303
304 # This settings defines a time in seconds that the bot should wait before
305 # a dcc chat, telnet, or relay connection times out.
306 set ident-timeout 5
307
308 # Define here whether or not a +o user still needs the +p flag to dcc the bot.
309 set require-p 1
310
311 # If you want people allow to telnet in and type 'NEW' to become a new user,
312 # set this to 1. This is similar to the 'hello' msg command. The protect-telnet
313 # setting must be set to 0 to use this.
314 set open-telnets 0
315
316 # If you don't want Eggdrop to identify itself as an eggdrop on a telnet
317 # connection, set this setting to 1. Eggdrop will display 'Nickname' instead.
318 set stealth-telnets 0
319
320 # If you want Eggdrop to display a banner when telneting in, set this setting
321 # to 1. The telnet banner is set by 'set telnet-banner'.
322 set use-telnet-banner 0
323
324 # This settings defines a time in seconds that the bot should wait before
325 # a dcc chat, telnet, or relay connection times out.
326 set connect-timeout 15
327
328 # Specify here the number of lines to accept from a user on the partyline
329 # within 1 second before they are considered to be flooding and therefore
330 # get booted.
331 set dcc-flood-thr 3
332
333 # Define here how many telnet connection attempts in how many seconds from
334 # the same host constitute a flood. The correct format is Attempts:Seconds.
335 set telnet-flood 5:60
336
337 # If you want telnet-flood to apply even to +f users, set this setting to 1.
338 set paranoid-telnet-flood 1
339
340 # Set here the amount of seconds before giving up on hostname/address
341 # lookup (you might want to increase this if you are on a slow network).
342 set resolve-timeout 7
343
344
345 ##### MORE ADVANCED SETTINGS #####
346
347 # Set this to your socks host if your Eggdrop sits behind a firewall. If
348 # you use a Sun "telnet passthru" firewall, prefix the host with a '!'.
349 #set firewall "!sun-barr.ebay:3666"
350
351 # If you have a NAT firewall (you box has an IP in one of the following
352 # ranges: 192.168.0.0-192.168.255.255, 172.16.0.0-172.31.255.255,
353 # 10.0.0.0-10.255.255.255 and your firewall transparently changes your
354 # address to a unique address for your box) or you have IP masquerading
355 # between you and the rest of the world, and /dcc chat, /ctcp chat or
356 # userfile sharing aren't working, enter your outside IP here. This IP
357 # is used for transfers only, and has nothing to do with the vhost4/6
358 # or listen-addr settings. You may still need to set them.
359 #set nat-ip "127.0.0.1"
360
361 # If you want all dcc file transfers to use a particular portrange either
362 # because you're behind a firewall, or for other security reasons, set it
363 # here.
364 #set reserved-portrange 2010:2020
365
366 # Set the time in minutes that temporary ignores should last.
367 set ignore-time 15
368
369 # Define here what Eggdrop considers 'hourly'. All calls to it, including such
370 # things as note notifying or userfile saving, are affected by this.
371 # For example:
372 #
373 # set hourly-updates 15
374 #
375 # The bot will save its userfile 15 minutes past every hour.
376 set hourly-updates 00
377
378 # Un-comment the next line and set the list of owners of the bot.
379 # You NEED to change this setting.
380 #set owner "MrLame, MrsLame"
381
382 # Who should a note be sent to when new users are learned?
383 set notify-newusers "$owner"
384
385 # Enter the flags that all new users should get by default. See '.help whois'
386 # on the partyline for a list of flags and their descriptions.
387 set default-flags "hp"
388
389 # Enter all user-defined fields that should be displayed in a '.whois'.
390 # This will only be shown if the user has one of these extra fields.
391 # You might prefer to comment this out and use the userinfo1.0.tcl script
392 # which provides commands for changing all of these.
393 set whois-fields "url birthday"
394
395 # Enable this setting if you want your Eggdrop to die upon receiving a SIGHUP
396 # kill signal. Otherwise, the Eggdrop will just save its userfile and rehash.
397 set die-on-sighup 0
398
399 # Enable this setting if you want your Eggdrop to die upon receiving a SIGTERM
400 # kill signal. Otherwise, the Eggdrop will just save its userfile and rehash.
401 set die-on-sigterm 1
402
403 # Uncomment these two lines if you wish to disable the .tcl and .set commands.
404 # If you select your owners wisely, you should be okay enabling these.
405 #unbind dcc n tcl *dcc:tcl
406 #unbind dcc n set *dcc:set
407
408 # If you enable this setting, only permanent owners (owner setting) will be
409 # able to use .tcl and .set. Moreover, if you want only let permanent owners
410 # use .dump, then set this to 2.
411 # WARNING: setting this to 0 is a security risk, don't do it unless you trust
412 # your owners enough to give them shell access to the account the bot is
413 # running on.
414 set must-be-owner 1
415
416 # Comment out this line to add the 'simul' partyline command (owners can
417 # manipulate other people on the party line). Please select owners wisely
418 # and use this command ethically!
419 unbind dcc n simul *dcc:simul
420
421 # Set here the maximum number of socket connections you will allow. You can
422 # increase this later, but never decrease it below current usage.
423 # If you're using Tcl threads, this is a per-thread maximum.
424 set max-socks 100
425
426 # Enable this setting if you want +d & +k users to use commands bound as -|-.
427 set allow-dk-cmds 1
428
429 # If your Eggdrop rejects bots that actually have already disconnected from
430 # another hub, but the disconnect information has not yet spread over the
431 # botnet due to lag, use this setting. The bot will wait dupwait-timeout
432 # seconds before it checks again and then finally reject the bot.
433 set dupwait-timeout 5
434
435 # Set this to 0 if you want the bot to strip '~+-^=' characters from user@hosts
436 # before matching them.
437 # This setting is currently kept for compatibility, but will be removed from
438 # the next release. Please leave it set to 1 to avoid problems with your user
439 # files in the future.
440 set strict-host 1
441
442 # Enable cidr support for b/e/I modes. This means the bot will understand
443 # and match modes in cidr notation, and will be able to put and enforce such
444 # bans or unban itself, if banned with a cidr mask.
445 # Do NOT set this, if your network/server does not support cidr!
446 set cidr-support 0
447
448 # You MUST remove this line for your bot to start. This has been added to
449 # prevent you from starting up a bot that is not fully configured. Bots
450 # that have not been fully configured may join the wrong IRC network, the
451 # wrong channels, or generally do things that you do not want. Please make
452 # sure that you have double-checked every setting. There's also a similar line
453 # lower down, just to make sure you're reading :)
454 die "Please make sure you edit your config file completely."
455
456
457 ##### MODULES #####
458
459 # Below are various settings for the modules included with Eggdrop.
460 # PLEASE READ AND EDIT THEM CAREFULLY, even if you're an old hand at
461 # Eggdrop, things change.
462
463 # This path specifies the path were Eggdrop should look for its modules.
464 # If you run the bot from the compilation directory, you will want to set
465 # this to "". If you use 'make install' (like all good kiddies do ;), this
466 # is a fine default. Otherwise, use your head :)
467 set mod-path "modules/"
468
469
470 #### BLOWFISH MODULE ####
471
472 # IF YOU DON'T READ THIS YOU MAY RENDER YOUR USERFILE USELESS LATER
473 # Eggdrop encrypts its userfile, so users can have secure passwords.
474 # Please note that when you change your encryption method later (i.e.
475 # using other modules like a md5 module), you can't use your current
476 # userfile anymore. Eggdrop will not start without an encryption module.
477 loadmodule blowfish
478
479
480 #### DNS MODULE ####
481
482 # This module provides asynchronous dns support. This will avoid long
483 # periods where the bot just hangs there, waiting for a hostname to
484 # resolve, which will often let it timeout on all other connections.
485 loadmodule dns
486
487
488 #### CHANNELS MODULE ####
489
490 # This module provides channel related support for the bot. Without it,
491 # you won't be able to make the bot join a channel or save channel
492 # specific userfile information.
493 loadmodule channels
494
495 # Enter here the filename where dynamic channel settings are stored.
496 set chanfile "LamestBot.chan"
497
498 # Set this setting to 1 if you want your bot to expire bans/exempts/invites set
499 # by other opped bots on the channel.
500 set force-expire 0
501
502 # Set this setting to 1 if you want your bot to share user greets with other
503 # bots on the channel if sharing user data.
504 set share-greet 0
505
506 # Set this setting to 1 if you want to allow users to store an info line.
507 set use-info 1
508
509 # Set this setting to 1 if you want to allow both +p and +s channel modes
510 # to be enforced at the same time by the chanmode channel setting.
511 # Make sure your server supports +ps mixing or you may get endless mode
512 # floods.
513 set allow-ps 0
514
515 # The following settings are used as default values when you .+chan #chan or .tcl
516 # channel add #chan. Look below for explanation of every option.
517
518 set global-flood-chan 15:60
519 set global-flood-deop 3:10
520 set global-flood-kick 3:10
521 set global-flood-join 5:60
522 set global-flood-ctcp 3:60
523 set global-flood-nick 5:60
524 set global-aop-delay 5:30
525 set global-idle-kick 0
526 set global-chanmode "nt"
527 set global-stopnethack-mode 0
528 set global-revenge-mode 0
529 set global-ban-type 3
530 set global-ban-time 120
531 set global-exempt-time 60
532 set global-invite-time 60
533
534 set global-chanset {
535 -autoop -autovoice
536 -bitch +cycle
537 +dontkickops +dynamicbans
538 +dynamicexempts +dynamicinvites
539 -enforcebans +greet
540 -inactive -nodesynch
541 -protectfriends +protectops
542 -revenge -revengebot
543 -secret -seen
544 +shared -statuslog
545 +userbans +userexempts
546 +userinvites -protecthalfops
547 -autohalfop -static
548 }
549
550 # chanmode +/-<modes>
551 # This setting makes the bot enforce channel modes. It will always add
552 # the +<modes> and remove the -<modes> modes.
553 #
554 # idle-kick 0
555 # This setting will make the bot check every minute for idle
556 # users. Set this to 0 to disable idle check.
557 #
558 # stopnethack-mode 0
559 # This setting will make the bot de-op anyone who enters the channel
560 # with serverops. There are seven different modes for this settings:
561 # 0 turn off
562 # 1 isoptest (allow serverop if registered op)
563 # 2 wasoptest (allow serverop if op before split)
564 # 3 allow serverop if isop or wasop
565 # 4 allow serverop if isop and wasop.
566 # 5 If the channel is -bitch, see stopnethack-mode 3
567 # If the channel is +bitch, see stopnethack-mode 1
568 # 6 If the channel is -bitch, see stopnethack-mode 2
569 # If the channel is +bitch, see stopnethack-mode 4
570 #
571 # revenge-mode 0
572 # This settings defines how the bot should punish bad users when
573 # revenging. There are four possible settings:
574 # 0 Deop the user.
575 # 1 Deop the user and give them the +d flag for the channel.
576 # 2 Deop the user, give them the +d flag for the channel, and kick them.
577 # 3 Deop the user, give them the +d flag for the channel, kick, and ban them.
578 #
579 # ban-type 3
580 # This setting defines what type of bans should eggdrop place for +k users or
581 # when revenge-mode is 3.
582 # Available types are:
583 # 0 *!user@host
584 # 1 *!*user@host
585 # 2 *!*@host
586 # 3 *!*user@*.host
587 # 4 *!*@*.host
588 # 5 nick!user@host
589 # 6 nick!*user@host
590 # 7 nick!*@host
591 # 8 nick!*user@*.host
592 # 9 nick!*@*.host
593 # You can also specify types from 10 to 19 which correspond to types
594 # 0 to 9, but instead of using a * wildcard to replace portions of the
595 # host, only numbers in hostnames are replaced with the '?' wildcard.
596 # Same is valid for types 20-29, but instead of '?', the '*' wildcard
597 # will be used.
598 #
599 # ban-time 120
600 # Set here how long temporary bans will last (in minutes). If you
601 # set this setting to 0, the bot will never remove them.
602 #
603 # exempt-time 60
604 # Set here how long temporary exempts will last (in minutes). If you
605 # set this setting to 0, the bot will never remove them. The bot will
606 # check the exempts every X minutes, but will not remove the exempt if
607 # a ban is set on the channel that matches that exempt. Once the ban is
608 # removed, then the exempt will be removed the next time the bot checks.
609 # Please note that this is an IRCnet feature.
610 #
611 # invite-time 60
612 # Set here how long temporary invites will last (in minutes). If you
613 # set this setting to 0, the bot will never remove them. The bot will
614 # check the invites every X minutes, but will not remove the invite if
615 # a channel is set to +i. Once the channel is -i then the invite will be
616 # removed the next time the bot checks. Please note that this is an IRCnet
617 # feature.
618 #
619 # aop-delay (minimum:maximum)
620 # This is used for autoop, autohalfop, autovoice. If an op or voice joins a
621 # channel while another op or voice is pending, the bot will attempt to put
622 # both modes on one line.
623 # aop-delay 0 No delay is used.
624 # aop-delay X An X second delay is used.
625 # aop-delay X:Y A random delay between X and Y is used.
626 #
627 # need-op { putserv "PRIVMSG #lamest :op me cos i'm lame!" }
628 # This setting will make the bot run the script enclosed in brackets
629 # if it does not have ops. This must be shorter than 120 characters.
630 # If you use scripts like getops.tcl or botnetop.tcl, you don't need
631 # to set this setting.
632 #
633 # need-invite { putserv "PRIVMSG #lamest :let me in!" }
634 # This setting will make the bot run the script enclosed in brackets
635 # if it needs an invite to the channel. This must be shorter than 120
636 # characters. If you use scripts like getops.tcl or botnetop.tcl, you
637 # don't need to set this setting.
638 #
639 # need-key { putserv "PRIVMSG #lamest :let me in!" }
640 # This setting will make the bot run the script enclosed in brackets
641 # if it needs the key to the channel. This must be shorter than 120
642 # characters. If you use scripts like getops.tcl or botnetop.tcl, you
643 # don't need to set this setting
644 #
645 # need-unban { putserv "PRIVMSG #lamest :let me in!" }
646 # This setting will make the bot run the script enclosed in brackets
647 # if it needs to be unbanned on the channel. This must be shorter than
648 # 120 characters. If you use scripts like getops.tcl or botnetop.tcl,
649 # you don't need to set this setting
650 #
651 # need-limit { putserv "PRIVMSG #lamest :let me in!" }
652 # This setting will make the bot run the script enclosed in brackets
653 # if it needs the limit to be raised on the channel. This must be
654 # shorter than 120 characters. If you use scripts like getops.tcl or
655 # botnetop.tcl, you don't need to set this setting
656 #
657 # flood-chan 15:60
658 # Set here how many channel messages in how many seconds from one
659 # host constitutes a flood. Setting this to 0 or 0:0 disables
660 # flood protection for the channel.
661 #
662 # flood-deop 3:10
663 # Set here how many deops in how many seconds from one host constitutes
664 # a flood. Setting this to 0 or 0:0 disables deop flood protection for
665 # the channel.
666 #
667 # flood-kick 3:10
668 # Set here how many kicks in how many seconds from one host constitutes
669 # a flood. Setting this to 0 or 0:0 disables kick flood protection for
670 # the channel.
671 #
672 # flood-join 5:60
673 # Set here how many joins in how many seconds from one host constitutes
674 # a flood. Setting this to 0 or 0:0 disables join flood protection for
675 # the channel.
676 #
677 # flood-ctcp 3:60
678 # Set here how many channel ctcps in how many seconds from one host
679 # constitutes a flood. Setting this to 0 or 0:0 disables ctcp flood
680 # protection for the channel.
681 #
682 # flood-nick 5:60
683 # Set here how many nick changes in how many seconds from one host
684 # constitutes a flood. Setting this to 0 or 0:0 disables nick flood
685 # protection for the channel.
686 #
687 # A complete list of all available channel settings:
688 #
689 # enforcebans
690 # When a ban is set, kick people who are on the channel and match
691 # the ban?
692 #
693 # dynamicbans
694 # Only activate bans on the channel when necessary? This keeps
695 # the channel's ban list from getting excessively long. The bot
696 # still remembers every ban, but it only activates a ban on the
697 # channel when it sees someone join who matches that ban.
698 #
699 # userbans
700 # Allow bans to be made by users directly? If turned off, the bot
701 # will require all bans to be made through the bot's console.
702 #
703 # dynamicexempts
704 # Only activate exempts on the channel when necessary? This keeps
705 # the channel's exempt list from getting excessively long. The bot
706 # still remembers every exempt, but it only activates a exempt on
707 # the channel when it sees a ban set that matches the exempt. The
708 # exempt remains active on the channel for as long as the ban is
709 # still active.
710 #
711 # userexempts
712 # Allow exempts to be made by users directly? If turned off, the
713 # bot will require all exempts to be made through the bot's console.
714 #
715 # dynamicinvites
716 # Only activate invites on the channel when necessary? This keeps
717 # the channel's invite list from getting excessively long. The bot
718 # still remembers every invite, but the invites are only activated
719 # when the channel is set to invite only and a user joins after
720 # requesting an invite. Once set, the invite remains until the
721 # channel goes to -i.
722 #
723 # userinvites
724 # Allow invites to be made by users directly? If turned off, the
725 # bot will require all invites to be made through the bot's console.
726 #
727 # autoop
728 # Op users with the +o flag as soon as they join the channel?
729 # This is insecure and not recommended.
730 #
731 # autohalfop
732 # Halfop users with the +l flag as soon as they join the channel?
733 # This is insecure and not recommended.
734 #
735 # bitch
736 # Only let users with +o) flag be opped on the channel?
737 #
738 # greet
739 # Say a user's info line when they join the channel?
740 #
741 # protectops
742 # Re-op a user with the +o flag if they get deopped?
743 #
744 # protecthalfops
745 # Re-halfop a user with the +l flag if they get dehalfopped?
746 #
747 # protectfriends
748 # Re-op a user with the +f flag if they get deopped?
749 #
750 # statuslog
751 # Log the channel status line every 5 minutes? This shows the bot's
752 # status on the channel (op, voice, etc.), the channel's modes, and
753 # the number of +m/+o/+v/+n/+b/+e/+I users on the channel. A sample
754 # status line follows:
755 #
756 # [01:40] @#lamest (+istn) : [m/1 o/1 v/4 n/7 b/1 e/5 I/7]
757 #
758 # revenge
759 # Remember people who deop/kick/ban the bot, valid ops, or friends
760 # and punish them? Users with the +f flag are exempt from revenge.
761 #
762 # revengebot
763 # This is similar to to the 'revenge' option, but it only triggers
764 # if a bot gets deopped, kicked or banned.
765 #
766 # autovoice
767 # Voice users with the +v flag when they join the channel?
768 #
769 # secret
770 # Prevent this channel from being listed on the botnet?
771 #
772 # shared
773 # Share channel-related user info for this channel?
774 #
775 # cycle
776 # Cycle the channel when it has no ops?
777 #
778 # dontkickops
779 # Do you want the bot not to be able to kick users who have the +o
780 # flag, letting them kick-flood for instance to protect the channel
781 # against clone attacks.
782 #
783 # inactive
784 # This prevents the bot from joining the channel (or makes it leave
785 # the channel if it is already there). It can be useful to make the
786 # bot leave a channel without losing its settings, channel-specific
787 # user flags, channel bans, and without affecting sharing.
788 #
789 # seen
790 # Respond to seen requests in the channel? The seen module must be
791 # loaded for this to work.
792 #
793 # nodesynch
794 # Allow non-ops to perform channel modes? This can stop the bot from
795 # fighting with services such as ChanServ, or from kicking IRCops when
796 # setting channel modes without having ops.
797 #
798 # static
799 # Allow only permanent owners to remove the channel?
800
801 # To add a channel to eggdrop, please enter the bot's partyline and type
802 # .+chan #channel. Check also .help chanset and .help chaninfo.
803 # You can still add a channel here and it will be saved if you have a
804 # chanfile. We recommend you to use the partyline though.
805 #
806 #channel add #lamest
807
808
809 #### SERVER MODULE ####
810
811 # This module provides the core server support. You have to load this
812 # if you want your bot to come on IRC. Not loading this is equivalent
813 # to the old NO_IRC define.
814 loadmodule server
815
816 # What is your network?
817 # 0 = EFnet
818 # 1 = IRCnet
819 # 2 = Undernet
820 # 3 = DALnet
821 # 4 = +e/+I/max-modes 20 Hybrid
822 # 5 = Others
823 set net-type 0
824
825 # Set the nick the bot uses on IRC, and on the botnet unless you specify a
826 # separate botnet-nick, here.
827 set nick "Lamestbot"
828
829 # Set the alternative nick which the bot uses on IRC if the nick specified
830 # by 'set nick' is unavailable. All '?' characters will be replaced by random
831 # numbers.
832 set altnick "Llamab?t"
833
834 # Set what should be displayed in the real-name field for the bot on IRC.
835 # This can not be blank, it has to contain something.
836 set realname "/msg LamestBot hello"
837
838 # This is a Tcl script to be run immediately after connecting to a server.
839 bind evnt - init-server evnt:init_server
840
841 proc evnt:init_server {type} {
842 global botnick
843 putquick "MODE $botnick +i-ws"
844 }
845
846 # Set the default port which should be used if none is specified with
847 # '.jump' or in 'set servers'.
848 set default-port 6667
849
850 # This is the bot's server list. The bot will start at the first server listed,
851 # and cycle through them whenever it gets disconnected. You need to change these
852 # servers to YOUR network's servers.
853 #
854 # The format is:
855 # server[:port[:password]]
856 # If you need to specify a numeric server IPv6 address, use following format:
857 # ip,[port[:password]]
858 #
859 # Both the port and password fields are optional; however, if you want to set a
860 # password you must also set a port. If a port isn't specified it will default to
861 # your default-port setting.
862 set servers {
863 you.need.to.change.this:6667
864 another.example.com:7000:password
865 2001:db8:618:5c0:263::,6669:password
866 }
867
868 # Number of seconds to wait between transmitting queued lines to the server.
869 # Lower this value at your own risk. ircd is known to start flood control
870 # at 512 bytes/2 seconds.
871 set msg-rate 2
872
873 # This setting makes the bot try to get his original nickname back if its
874 # primary nickname is already in use.
875 set keep-nick 1
876
877
878 # This setting makes the bot squelch the error message when rejecting a DCC
879 # CHAT, SEND or message command. Normally, Eggdrop notifies the user that the
880 # command has been rejected because they don't have access. Note that sometimes
881 # IRC server operators detect bots that way.
882 set quiet-reject 1
883
884 # If you want your bot to answer lower case ctcp requests (non rfc-
885 # compliant), set this setting to 1. mIRC will do this, most other
886 # clients will not.
887 set lowercase-ctcp 0
888
889 # Set how many ctcps should be answered at once.
890 set answer-ctcp 3
891
892 # Set here how many msgs in how many seconds from one host constitutes
893 # a flood. If you set this to 0:0, msg flood protection will be disabled.
894 set flood-msg 5:60
895
896 # Set here how many ctcps in how many seconds from one host constitutes
897 # a flood. If you set this to 0:0, ctcp flood protection will be disabled.
898 set flood-ctcp 3:60
899
900 # This settings makes the bot cycle forever through the server list until
901 # it successfully connects to one.
902 set never-give-up 1
903
904 # This setting defines how long Eggdrop should wait before moving from one
905 # server to another on disconnect. If you set 0 here, Eggdrop will not wait
906 # at all and will connect instantly. Setting this too low could result in
907 # your bot being K:Lined.
908 set server-cycle-wait 60
909
910 # Set here how long Eggdrop should wait for a response when connecting to a
911 # server before giving up and moving on to next server.
912 set server-timeout 60
913
914 # If the number of servers on the net gets below this number, the bot
915 # will jump to a new server (it will assume it's on the losing end of
916 # a netsplit). Set this to 0 to turn off. If your bot is running on
917 # any major IRC network, this should probably be turned off.
918 set servlimit 0
919
920 # Set this to 1 if Eggdrop should check for stoned servers? (where the
921 # server connection has died, but Eggdrop hasn't been notified yet).
922 set check-stoned 1
923
924 # If you want your bot to exit the server if it receives an ERROR message,
925 # set this to 1.
926 set serverror-quit 1
927
928 # Set here the maximum number of lines to queue to the server. If you're
929 # going to dump large chunks of text to people over IRC, you will probably
930 # want to raise this. 300 is fine for most people though.
931 set max-queue-msg 300
932
933 # If you want Eggdrop to trigger binds for ignored users, set this to 1.
934 set trigger-on-ignore 0
935
936 # This setting configures PUBM and MSGM binds to be exclusive of PUB and MSG
937 # binds. This means if a MSGM bind with the mask "*help*" exists and is
938 # triggered, any MSG bindings with "help" in their mask will not be
939 # triggered. Don't enable this unless you know what you are doing!
940 set exclusive-binds 0
941
942 # Allow identical messages in the mode queue?
943 set double-mode 1
944
945 # Allow identical messages in the server queue?
946 set double-server 1
947
948 # Allow identical messages in the help queue?
949 set double-help 1
950
951 # This optimizes the kick queue. It also traces nick changes and parts in
952 # the channel and changes the kick queue accordingly. There are three
953 # different options for this setting:
954 # 0 = Turn it off.
955 # 1 = Optimize the kick queue by summarizing kicks.
956 # 2 = Trace nick changes and parts on the channel and change the queue
957 # accordingly. For example, bot will not try to kick users who have
958 # already parted the channel.
959 # ATTENTION: Setting 2 is very CPU intensive.
960 set optimize-kicks 1
961
962 # If your network supports more recipients per command then 1, you can
963 # change this behavior here. Set this to the number of recipients per
964 # command, or set this to 0 for unlimited.
965 set stack-limit 4
966
967 ### SERVER MODULE - OTHER NETWORKS (net-type 5) ###
968
969 # This settings defines how umode +r is understood by Eggdrop. Some networks
970 # use +r to indicate a restricted connection. If this is your case, and you
971 # want your bot to leave restricted servers and jump to the next server on its
972 # list, then set it to 1.
973 #set check-mode-r 1
974
975 # This setting allows you to specify the maximum nick-length supported by your
976 # network. The default setting is 9. The maximum supported length by Eggdrop
977 # is 32.
978 #set nick-len 9
979
980 #### CTCP MODULE ####
981
982 # This module provides the normal ctcp replies that you'd expect.
983 # Without it loaded, CTCP CHAT will not work. The server module
984 # is required for this module to function.
985 loadmodule ctcp
986
987 # Set here how the ctcp module should answer ctcps. There are 3 possible
988 # operating modes:
989 # 0: Normal behavior is used.
990 # 1: The bot ignores all ctcps, except for CHAT and PING requests
991 # by users with the +o flag.
992 # 2: Normal behavior is used, however the bot will not answer more
993 # than X ctcps in Y seconds (defined by 'set flood-ctcp').
994 set ctcp-mode 0
995
996 # There are also several variables to help make your bot less noticeable.
997 # They are: ctcp-version, ctcp-finger, and ctcp-userinfo. You can use set to set
998 # them to values you'd like.
999
1000
1001 #### IRC MODULE ####
1002
1003 # This module provides basic IRC support for your bot. You have to
1004 # load this if you want your bot to come on IRC. The server and channels
1005 # modules must be loaded for this module to function.
1006 loadmodule irc
1007
1008 # Set this to 1 if you want to bounce all server bans.
1009 set bounce-bans 0
1010
1011 # Set this to 1 if you want to bounce all server exemptions (+e modes).
1012 # This is disabled if use-exempts is disabled.
1013 set bounce-exempts 0
1014
1015 # Set this to 1 if you want to bounce all server invitations (+I modes).
1016 # This is disabled if use-invites is disabled.
1017 set bounce-invites 0
1018
1019 # Set this to 1 if you want to bounce all server modes.
1020 set bounce-modes 0
1021
1022 # Set here the maximum number of bans you want the bot to set on a channel.
1023 # Eggdrop will not place any more bans if this limit is reached. Undernet
1024 # currently allows 45 bans, IRCnet allows 30, EFnet allows 100, and DALnet
1025 # allows 100.
1026 set max-bans 30
1027
1028 # Set here the maximum number of exempts you want Eggdrop to set on a channel.
1029 # Eggdrop will not place any more exempts if this limit is reached.
1030 set max-exempts 20
1031
1032 # Set here the maximum number of invites you want Eggdrop to set on a channel.
1033 # Eggdrop will not place any more invites if this limit is reached.
1034 set max-invites 20
1035
1036 # There is a global limit for +b/+e/+I modes. This limit should be set to
1037 # the same value as max-bans for networks that do not support +e/+I.
1038 set max-modes 30
1039
1040 # The following settings should be left commented unless the default values
1041 # are being overridden. By default, exempts and invites are on for EFnet and
1042 # IRCnet, but off for all other large networks. This behavior can be modified
1043 # with the following 2 flags. If your network doesn't support +e/+I modes then
1044 # you will be unable to use these features.
1045 #
1046 # Do you want to enable exempts (+e modes)?
1047 #set use-exempts 0
1048
1049 # Do you want to enable invites (+I modes)?
1050 #set use-invites 0
1051
1052 # Set this to 1 if you want the bot to kick for control character/ctcp
1053 # avalanches to a channel. Remember that if it does, it won't ban them.
1054 # This can start kick floods.
1055 set kick-fun 0
1056
1057 # Set this to 1 if you want the bot to ban for control character/ctcp
1058 # avalanches to a channel. This can prevent kick floods, but it also can
1059 # fill the banlist.
1060 set ban-fun 0
1061
1062 # If you want people to be able to add themselves to the bot's userlist
1063 # with the default userflags (defined above in the config file) via the
1064 # 'hello' msg command, set this to 1.
1065 set learn-users 0
1066
1067 # Set here the time (in seconds) to wait for someone to return from a netsplit
1068 # (i.e. wasop will expire afterwards). Set this to 1500 on IRCnet since its
1069 # nick delay stops after 30 minutes.
1070 set wait-split 600
1071
1072 # Set here the time (in seconds) that someone must have been off-channel
1073 # before re-displaying their info line.
1074 set wait-info 180
1075
1076 # Set this to the maximum number of bytes to send in the arguments
1077 # of modes sent to the server. Most servers default this to 200.
1078 set mode-buf-length 200
1079
1080 # Many IRCops find bots by seeing if they reply to 'hello' in a msg.
1081 # You can change this to another word by un-commenting the following
1082 # two lines and changing "myword" to the word wish to use instead of
1083 # 'hello'. It must be a single word.
1084 #unbind msg - hello *msg:hello
1085 #bind msg - myword *msg:hello
1086
1087 # Many takeover attempts occur due to lame users blindly /msg ident'ing to
1088 # the bot and attempting to guess passwords. We now unbind this command by
1089 # default to discourage them. You can enable these commands by commenting the
1090 # following two lines.
1091 unbind msg - ident *msg:ident
1092 unbind msg - addhost *msg:addhost
1093
1094 # Some IRC servers are using some non-standard op-like channel prefixes/modes.
1095 # Define them here so the bot can recognize them. Just "@" should be fine for
1096 # most networks. Un-comment the second line for some UnrealIRCds.
1097
1098 set opchars "@"
1099 #set opchars "@&~"
1100
1101 # If you are so lame you want the bot to display peoples info lines, even
1102 # when you are too lazy to add their chanrecs to a channel, set this to 1.
1103 # *NOTE* This means *every* user with an info line will have their info
1104 # line displayed on EVERY channel they join (provided they have been gone
1105 # longer than wait-info).
1106 set no-chanrec-info 0
1107
1108 ### IRC MODULE - IRCnet SPECIFIC FEATURES (net-type 1) ###
1109
1110 # Attention: Use these settings *only* if you set 'net-type' to 1!
1111
1112 # At the moment, the current IRCnet IRCd version (2.10) doesn't support the
1113 # mixing of b, o and v modes with e and I modes. This might be changed in the
1114 # future, so use 1 at the moment for this setting.
1115 set prevent-mixing 1
1116
1117 ### IRC MODULE - OTHER NETWORKS (net-type 5) ###
1118
1119 # Attention: Use these settings *only* if you set 'net-type' to 5!
1120
1121 # If your network supports more users per kick command then 1, you can
1122 # change this behavior here. Set this to the number of users to kick at
1123 # once, or set this to 0 for all at once.
1124 #set kick-method 1
1125
1126 # Some networks allow you to stack lots of channel modes into one line.
1127 # They're all guaranteed to support at least 3, so that's the default.
1128 # If you know your network supports more, you may want to adjust this.
1129 # This setting is limited to 6, although if you want to use a higher value,
1130 # you can modify this by changing the value of MODES_PER_LINE_MAX in
1131 # src/chan.h and recompiling the bot.
1132 #set modes-per-line 3
1133
1134 # Some networks don't include the +l limit and +k or -k key modes
1135 # in the modes-per-line (see above) limitation. Set include-lk to 0 for
1136 # these networks.
1137 #set include-lk 1
1138
1139 # Set this to 1 if your network uses IRCu2.10.01 specific /who requests.
1140 # Eggdrop can, therefore, ask only for exactly what's needed.
1141 #set use-354 0
1142
1143 # If your network doesn't use rfc 1459 compliant string matching routines,
1144 # set this to 0.
1145 #set rfc-compliant 1
1146
1147
1148 #### TRANSFER MODULE ####
1149
1150 # The transfer module provides DCC SEND/GET support and userfile transfer
1151 # support for userfile sharing. Un-comment the next line to load it if you
1152 # need this functionality.
1153 #loadmodule transfer
1154
1155 # Set here the maximum number of simultaneous downloads to allow for
1156 # each user.
1157 set max-dloads 3
1158
1159 # Set here the block size for dcc transfers. ircII uses 512 bytes,
1160 # but admits that it may be too small. 1024 is standard these days.
1161 # 0 is turbo-dcc (recommended).
1162 set dcc-block 0
1163
1164 # Enable this setting if you want to copy files into the /tmp directory
1165 # before sending them. This is useful on most systems for file stability,
1166 # but if your directories are NFS mounted, it's a pain, and you'll want
1167 # to set this to 0. If you are low on disk space, you may also want to
1168 # set this to 0.
1169 set copy-to-tmp 1
1170
1171 # Set here the time (in seconds) to wait before an inactive transfer times out.
1172 set xfer-timeout 30
1173
1174
1175 #### SHARE MODULE ####
1176
1177 # This module provides userfile sharing support between two directly
1178 # linked bots. The transfer and channels modules are required for this
1179 # module to correctly function. Un-comment the following line to load
1180 # the share module.
1181 #loadmodule share
1182
1183 # Settings in this section must be un-commented before setting.
1184
1185 # When two bots get disconnected, this setting allows them to create a
1186 # resync buffer which saves all changes done to the userfile during
1187 # the disconnect. When they reconnect, they will not have to transfer
1188 # the complete user file, but, instead, just send the resync buffer.
1189 #
1190 # NOTE: This has been known to cause loss of channel flags and other
1191 # problems. Using this setting is not recommended.
1192 #set allow-resync 0
1193
1194 # This setting specifies how long to hold another bots resync data
1195 # before flushing it.
1196 #set resync-time 900
1197
1198 # When sharing user lists, DON'T ACCEPT global flag changes from other bots?
1199 # NOTE: The bot will still send changes made on the bot, it just won't accept
1200 # any global flag changes from other bots. This overrides the private-globals
1201 # setting (below).
1202 #set private-global 0
1203
1204 # When sharing user lists, if private-global isn't set, which global flag
1205 # changes from other bots should be ignored?
1206 #set private-globals "mnot"
1207
1208 # When sharing user lists, don't accept ANY userfile changes from other
1209 # bots? Paranoid people should use this feature on their hub bot. This
1210 # will force all userlist changes to be made via the hub.
1211 #set private-user 0
1212
1213 # This setting makes the bot discard its own bot records in favor of
1214 # the ones sent by the hub.
1215 # NOTE: No passwords or botflags are shared, only ports and
1216 # address are added to sharing procedure. This only works with hubs that
1217 # are v1.5.1 or higher.
1218 #set override-bots 0
1219
1220
1221 #### COMPRESS MODULE ####
1222
1223 # This module provides provides support for file compression. This allows the
1224 # bot to transfer compressed user files and therefore save a significant amount
1225 # of bandwidth. The share module must be loaded to load this module. Un-comment
1226 # the following line to the compress module.
1227 #loadmodule compress
1228
1229 # Allow compressed sending of user files? The user files are compressed with
1230 # the compression level defined in `compress-level'.
1231 set share-compressed 1
1232
1233 # This is the default compression level used. These levels are the same as
1234 # those used by GNU gzip.
1235 #set compress-level 9
1236
1237
1238 #### FILESYSTEM MODULE ####
1239
1240 # This module provides an area within the bot where users can store and
1241 # manage files. With this module, the bot is usable as a file server. The
1242 # transfer module is required for this module to function. Un-comment
1243 # the following line to load the filesys module.
1244 #loadmodule filesys
1245
1246 # Set here the 'root' directory for the file system.
1247 set files-path "/home/mydir/filesys"
1248
1249 # If you want to allow uploads, set this to the directory uploads
1250 # should be put into. Set this to "" if you don't want people to
1251 # upload files to your bot.
1252 set incoming-path "/home/mydir/filesys/incoming"
1253
1254 # If you don't want to have a central incoming directory, but instead
1255 # want uploads to go to the current directory that a user is in, set
1256 # this setting to 1.
1257 set upload-to-pwd 0
1258
1259 # Eggdrop creates a '.filedb' file in each subdirectory of your file area
1260 # to keep track of its own file system information. If you can't do that (for
1261 # example, if the dcc path isn't owned by you, or you just don't want it to do
1262 # that) specify a path here where you'd like all of the database files to be
1263 # stored instead.
1264 set filedb-path ""
1265
1266 # Set here the maximum number of people that can be in the file area at once.
1267 # Setting this to 0 makes it effectively infinite.
1268 set max-file-users 20
1269
1270 # Set here the maximum allowable file size that will be received (in KB).
1271 # Setting this to 0 makes it effectively infinite.
1272 set max-filesize 1024
1273
1274
1275 #### NOTES MODULE ####
1276
1277 # This module provides support for storing of notes for users from each other.
1278 # Note sending between currently online users is supported in the core, this is
1279 # only for storing the notes for later retrieval.
1280 loadmodule notes
1281
1282 # Set here the filename where private notes between users are stored.
1283 set notefile "LamestBot.notes"
1284
1285 # Set here the maximum number of notes to allow to be stored for each user
1286 # (to prevent flooding).
1287 set max-notes 50
1288
1289 # Set here how long (in days) to store notes before expiring them.
1290 set note-life 60
1291
1292 # Set this to 1 if you want to allow users to specify a forwarding address
1293 # for forwarding notes to another account on another bot.
1294 set allow-fwd 0
1295
1296 # Set this to 1 if you want the bot to let people know hourly if they have
1297 # any notes.
1298 set notify-users 0
1299
1300 # Set this to 1 if you want the bot to let people know on join if they have
1301 # any notes.
1302 set notify-onjoin 1
1303
1304 # Comment out this next line. Otherwise, your bot won't start.
1305 die "You didn't edit your config file completely like you were told, did you?"
1306
1307
1308 #### CONSOLE MODULE ####
1309
1310 # This module provides storage of console settings when you exit the
1311 # bot or type .store on the partyline.
1312 loadmodule console
1313
1314 # Save users console settings automatically? Otherwise, they have
1315 # to use the .store command.
1316 set console-autosave 1
1317
1318 # If a user doesn't have any console settings saved, which channel
1319 # do you want them automatically put on?
1320 set force-channel 0
1321
1322 # Enable this setting if a user's global info line should be displayed
1323 # when they join a botnet channel.
1324 set info-party 0
1325
1326
1327 #### WOOBIE MODULE ####
1328
1329 # This is for demonstrative purposes only. If you are looking for starting
1330 # point in writing modules, woobie is the right thing.
1331 #loadmodule woobie
1332
1333
1334 #### SEEN MODULE ####
1335
1336 # This module provides very basic seen commands via msg, on channel or via dcc.
1337 # This module works only for users in the bot's userlist. If you are looking for
1338 # a better and more advanced seen module, try the gseen module by G'Quann. You
1339 # can find it at http://www.kreativrauschen.com/gseen.mod/.
1340 #loadmodule seen
1341
1342
1343 #### ASSOC MODULE ####
1344
1345 # This module provides assoc support, i.e. naming channels on the botnet.
1346 # You can load it by un-commenting the following line.
1347 #loadmodule assoc
1348
1349
1350 #### WIRE MODULE ####
1351
1352 # This module provides all the standard .wire commands via dcc. It is an
1353 # encrypted partyline communication tool, compatible with wire.tcl. An
1354 # encryption module must be loaded to use this module. Un-comment the
1355 # following line to load the wire module.
1356 #loadmodule wire
1357
1358 #### UPTIME MODULE ####
1359
1360 # This module reports uptime statistics to http://uptime.eggheads.org.
1361 # Go look and see what your uptime is! It takes about 9 hours to show up,
1362 # so if your bot isn't listed, try again later. The server module must be
1363 # loaded for this module to function.
1364 #
1365 # Information sent to the server includes the bot's uptime, botnet-nick,
1366 # server, version, and IP address. This information is stored in a temporary
1367 # logfile for debugging purposes only. The only publicly available information
1368 # will be the bot's botnet-nick, version and uptime. If you do not wish for this
1369 # information to be sent, comment out the following line.
1370 loadmodule uptime
1371
1372 ##### SCRIPTS #####
1373
1374 # This is a good place to load scripts to use with your bot.
1375
1376 # This line loads script.tcl from the scripts directory inside your Eggdrop's
1377 # directory. All scripts should be put there, although you can place them where
1378 # you like as long as you can supply a fully qualified path to them.
1379 #
1380 # source scripts/script.tcl
1381
1382 source scripts/alltools.tcl
1383 source scripts/action.fix.tcl
1384
1385 # This script enhances Eggdrop's built-in dcc '.whois' command to allow all
1386 # users to '.whois' their own handle.
1387 source scripts/dccwhois.tcl
1388
1389 # This script provides many useful informational functions, like setting
1390 # users' URLs, e-mail address, ICQ numbers, etc. You can modify it to add
1391 # extra entries.
1392 source scripts/userinfo.tcl
1393 loadhelp userinfo.help
1394
1395 # Use this script for Tcl and Eggdrop backwards compatibility.
1396 # NOTE: This can also cause problems with some newer scripts.
1397 #source scripts/compat.tcl
1398
1399 # A few IRC networks (EFnet and Undernet) have added some simple checks to
1400 # prevent drones from connecting to the IRC network. While these checks are
1401 # fairly trivial, they will prevent your Eggdrop from automatically
1402 # connecting. In an effort to work-around these, we have developed a couple of
1403 # TCL scripts to automate the process.
1404
1405 if {[info exists net-type]} {
1406 switch -- ${net-type} {
1407 "0" {
1408 # EFnet
1409 source scripts/quotepong.tcl
1410 }
1411 "2" {
1412 # Undernet
1413 source scripts/quotepass.tcl
1414 }
1415 }
1416 }

webmaster@eggheads.org
ViewVC Help
Powered by ViewVC 1.1.23