/[cvs]/eggdrop1.7/eggdrop.conf
ViewVC logotype

Contents of /eggdrop1.7/eggdrop.conf

Parent Directory Parent Directory | Revision Log Revision Log | View Revision Graph Revision Graph


Revision 1.4 - (show annotations) (download)
Thu Sep 2 20:27:00 2004 UTC (14 years, 9 months ago) by wcc
Branch: MAIN
Changes since 1.3: +9 -5 lines
* Applying the HTTP proxy support patch.
* doc/tcl-commands.doc -> doc/TCL-COMMANDS to conform with the naming of the
  other docs.

1 #! /path/to/executable/eggdrop
2 # ^- This should contain a fully qualified path to your Eggdrop executable.
3 #
4 # $Id: eggdrop.conf,v 1.3 2004/08/31 01:48:21 wcc Exp $
5 #
6 # This is a sample Eggdrop configuration file which includes all possible
7 # settings that can be used to configure your bot.
8 #
9 # The pound signs (#) that you see at the beginning of some lines mean that
10 # the remainder of that line is a comment, or just for your information. By
11 # adding or deleting pound signs, you can comment or uncomment a setting,
12 # respectively.
13 #
14 # Arguments for a command or setting may be inclosed in <>'s or []'s in the
15 # example/description. Arguments in <>'s are required, while [] means optional.
16 #
17 # More detailed descriptions of all these settings can be found in
18 # doc/settings/.
19
20
21
22 ##### BASIC SETTINGS #####
23
24 # This setting defines the username the bot uses on IRC. This setting has
25 # no effect if an ident daemon is running on your bot's machine.
26 set username "lamest"
27
28 # This setting defines which contact person should be shown in .status,
29 # /msg help, and other places. You really should include this information.
30 set admin "Lamer <email: lamer@lamest.lame.org>"
31
32 # This setting is used only for info to share with others on your botnet.
33 # Set this to the IRC network your bot is connected to.
34 set network "I.didn't.edit.my.config.file.net"
35
36 # This setting defines the timezone is your bot in. It's used for internal
37 # routines as well as for logfile timestamping and scripting purposes.
38 # The timezone string specifies the name of the timezone and must be three
39 # or more alphabetic characters. For example, Central European Time(UTC+1)
40 # should be "CET".
41 set timezone "EST"
42
43 # The offset setting specifies the time value to be added to the local
44 # time to get Coordinated Universal Time (UTC aka GMT). The offset is
45 # positive if the local timezone is west of the Prime Meridian and
46 # negative if it is east. The value (in hours) must be between -23 and
47 # 23. For example, if the timezone is UTC+1, the offset is -1.
48 set offset "5"
49
50 # If you don't want to use the timezone setting for scripting purposes only,
51 # but instead everywhere possible, un-comment the following line.
52 #set env(TZ) "$timezone $offset"
53
54 # If you're using virtual hosting (your machine has more than 1 IP), you
55 # may want to specify the particular IP to bind to. You can specify either
56 # by hostname or by IP. You may also want to set the hostname here if
57 # Eggdrop has trouble detecting it when it starts up.
58 #set my-hostname "virtual.host.com"
59 #set my-ip "99.99.0.0"
60
61 # If you want to have your Eggdrop messages displayed in a language other
62 # than English, change this setting to match your preference. An alternative
63 # would be to set the environment variable EGG_LANG to that value.
64 #
65 # Languages included with Eggdrop: Danish, English, French, Finnish, German.
66 #addlang "english"
67
68
69 ##### LOG FILES #####
70
71 # Eggdrop is capable of logging various things, from channel chatter to
72 # commands people use on the bot and file transfers. Logfiles are normally
73 # kept for 24 hours. Afterwards, they will be renamed to "(logfile).yesterday".
74 # After 48 hours, they will be overwritten by the logfile of the next day.
75 #
76 # Events are logged by certain categories. This way, you can specify
77 # exactly what kind of events you want sent to various logfiles.
78 #
79 # Logfile flags:
80 # b - information about bot linking and userfile sharing
81 # c - commands
82 # d - misc debug information
83 # e - Tcl errors
84 # h - raw share traffic
85 # j - joins, parts, quits, and netsplits on the channel
86 # k - kicks, bans, and mode changes on the channel
87 # m - private msgs, notices and ctcps to the bot
88 # o - misc info, errors, etc (IMPORTANT STUFF)
89 # p - public text on the channel
90 # r - raw incoming server traffic
91 # s - server connects, disconnects, and notices
92 # t - raw botnet traffic
93 # v - raw outgoing server traffic
94 # w - wallops (make sure the bot sets +w in init-server)
95 # x - file transfers and file-area commands
96 #
97 # Note that modes d, h, r, t, and v can fill disk quotas quickly. There are
98 # also eight user-defined levels (1-8) which can be used by Tcl scripts.
99 #
100 # Each logfile belongs to a certain channel. Events of type 'k', 'j', and 'p'
101 # are logged to whatever channel they happened on. Most other events are
102 # currently logged to every channel. You can make a logfile belong to all
103 # channels by assigning it to channel "*".
104
105 # This is the maximum number of logfiles allowed. This setting can be
106 # increased; however, don't decrease it.
107 set max-logs 5
108
109 # This is the maximum size of your logfiles. Set it to 0 to disable.
110 # This value is in kilobytes, so '550' would mean cycle logs when it
111 # reaches the size of 550 kilobytes. Note that this only works if you
112 # have keep-all-logs 0 (OFF).
113 set max-logsize 0
114
115 # This could be good if you have had problem with the logfile filling
116 # your quota/hard disk or if you log +p and publish it to the web and
117 # need more up-to-date info. Note that this setting might increase the
118 # CPU usage of your bot (on the other hand it will decrease your mem usage).
119 set quick-logs 0
120
121 # This setting allows you the logging of raw incoming server traffic via
122 # console/log flag 'r', raw outgoing server traffic via console/log mode 'v',
123 # raw botnet traffic via console/log mode 't', and raw share traffic via
124 # console/log mode 'h'. These flags can create a large security hole,
125 # allowing people to see user passwords. This is now restricted to +n users
126 # only. Please choose your owners with care.
127 set raw-log 0
128
129 # This creates a logfile named eggdrop.log containing private msgs/ctcps,
130 # commands, errors, and misc. info from any channel.
131 logfile mco * "logs/eggdrop.log"
132
133 # This creates a logfile named lamest.log containing joins, parts,
134 # netsplits, kicks, bans, mode changes, and public chat on the
135 # channel #lamest.
136 logfile jpk #lamest "logs/lamest.log"
137
138 # This creates a logfile named tcl_errors.log containing Tcl errors reported.
139 logfile e * "logs/tclerrors.log"
140
141 # Use this feature to timestamp entries in the log file.
142 set log-time 1
143
144 # If you want to keep your logfiles forever, turn this setting on. All
145 # logfiles will get suffix ".[day, 2 digits][month, 3 letters][year, 4 digits]".
146 # Note that your quota/hard-disk might be filled by this, so check your
147 # logfiles often and download them.
148 set keep-all-logs 0
149
150 # If keep-all-logs is 1, this setting will define the suffix of the logfiles.
151 # The default will result in a suffix like "04May2000". "%Y%m%d" will produce
152 # the often used yyyymmdd format. Read the strftime manpages for more options.
153 # NOTE: On systems which don't support strftime, the default format will
154 # be used _always_.
155 set logfile-suffix ".%d%b%Y"
156
157 # You can specify when Eggdrop should switch logfiles and start fresh. You
158 # must use military time for this setting. 300 is the default, and describes
159 # 03:00 (AM).
160 set switch-logfiles-at 300
161
162 # "Writing user file..." and "Writing channel file..." messages won't be
163 # logged anymore if this option is enabled.
164 set quiet-save 0
165
166
167 ##### CONSOLE #####
168
169 # This is the default console mode. It uses the same event flags as the log
170 # files do. The console channel is automatically set to your "primary" channel,
171 # which is set in the modules section of the config file. Masters can change
172 # their console channel and modes with the '.console' command.
173
174 set console "mkcobxs"
175
176
177 ##### FILES AND DIRECTORIES #####
178
179 # Specify here the filename your userfile should be saved as.
180 set userfile "LamestBot.user"
181
182 # Specify here the filename Eggdrop will save its pid to. If no pidfile is
183 # specified, pid.(botnet-nick) will be used.
184 #set pidfile "pid.LamestBot"
185
186 # If you want your userfile to be sorted upon saving, enable this setting.
187 # This causes the bot to use bit more CPU when saving the usefile.
188 set sort-users 0
189
190 # Specify here where Eggdrop should look for help files. Don't modify this
191 # setting unless you know what you're doing!
192 set help-path "help/"
193
194 # Specify here where Eggdrop should look for text files. This is used for
195 # certain Tcl and DCC commands.
196 set text-path "text/"
197
198 # Set here a place to store temporary files.
199 set temp-path "/tmp"
200
201 # The MOTD (Message Of The day) is displayed when people dcc chat or telnet
202 # to the bot. Look at doc/TEXT-SUBSTITUTIONS for options.
203 set motd "text/motd"
204
205 # This banner will be displayed on telnet connections. Look at
206 # doc/TEXT-SUBSTITUTIONS for options.
207 set telnet-banner "text/banner"
208
209 # This specifies what permissions the user, channel, and notes files should
210 # be set to. The octal values are the same as for the chmod system command.
211 #
212 # To remind you:
213 #
214 # u g o u g o u g o
215 # 0600 rw------- 0400 r-------- 0200 -w------- u - user
216 # 0660 rw-rw---- 0440 r--r----- 0220 -w--w---- g - group
217 # 0666 rw-rw-rw- 0444 r--r--r-- 0222 -w--w--w- o - others
218 #
219 # Note that the default 0600 is the most secure one and should only be changed
220 # if you need your files for shell scripting or other external applications.
221 set userfile-perm 0600
222
223
224 ##### BOTNET/DCC/TELNET #####
225
226 # Settings in this section should be unimportant for you until you deal
227 # with botnets (multiple Eggdrops connected together to maximize efficiency).
228 # You should read doc/BOTNET before modifying these settings.
229
230 # If you want to use a different nickname on the botnet than you use on
231 # IRC (i.e. if you're on an un-trusted botnet), un-comment the next line
232 # and set it to the nick you would like to use.
233 #set botnet-nick "LlamaBot"
234
235 # This opens a telnet port by which you and other bots can interact with the
236 # Eggdrop by telneting in.
237 #
238 # There are more options for the listen command in doc/TCL-COMMANDS. Note
239 # that if you are running more than one bot on the same machine, you will want
240 # to space the telnet ports at LEAST 5 apart, although 10 is even better.
241 #
242 # Valid ports are typically anything between 1025 and 65535 assuming the
243 # port is not already in use.
244 #
245 # If you would like the bot to listen for users and bots in separate ports,
246 # use the following format:
247 #
248 # listen 3333 bots
249 # listen 4444 users
250 #
251 # If you wish to use only one port, use this format:
252 #
253 # listen 3333 all
254 #
255 # You need to un-comment this line and change the port number in order to open
256 # the listen port. You should not keep this set to 3333.
257 #listen 3333 all
258
259 # This setting defines whether or not people can boot users on the Eggdrop
260 # from other bots in your botnet. Valid settings are:
261 # 0 - allow *no* outside boots
262 # 1 - allow boots from sharebots
263 # 2 - allow any boots
264 set remote-boots 2
265
266 # This setting prohibits remote bots from telling your Eggdrop to unlink from
267 # share bots.
268 set share-unlinks 1
269
270 # This setting will drop telnet connections not matching a known host. It
271 # greatly improves protection from IRCops, but makes it impossible to add
272 # hosts on limbo (NOIRC) bots or have NEW as a valid login.
273 set protect-telnet 0
274
275 # This setting will make the bot ignore DCC chat requests which appear to
276 # have bogus information on the grounds that the user may have been trying
277 # to make the bot connect to somewhere that will get it into trouble, or
278 # that the user has a broken client (like mIRC tends to do), in which case
279 # the connect wouldn't work anyway. It's suggested that you turn this on.
280 set dcc-sanitycheck 0
281
282 # This settings defines a time in seconds that the bot should wait before
283 # a dcc chat, telnet, or relay connection times out.
284 set ident-timeout 5
285
286 # Define here whether or not a +o user still needs the +p flag to dcc the bot.
287 set require-p 0
288
289 # If you want people allow to telnet in and type 'NEW' to become a new user,
290 # set this to 1. This is similar to the 'hello' msg command. The protect-telnet
291 # setting must be set to 0 to use this.
292 set open-telnets 0
293
294 # If you don't want Eggdrop to identify itself as an eggdrop on a telnet
295 # connection, set this setting to 1. Eggdrop will display 'Nickname' instead.
296 set stealth-telnets 0
297
298 # If you want Eggdrop to display a banner when telneting in, set this setting
299 # to 1. The telnet banner is set by 'set telnet-banner'.
300 set use-telnet-banner 0
301
302 # This settings defines a time in seconds that the bot should wait before
303 # a dcc chat, telnet, or relay connection times out.
304 set connect-timeout 15
305
306 # Specify here the number of lines to accept from a user on the partyline
307 # within 1 second before they are considered to be flooding and therefore
308 # get booted.
309 set dcc-flood-thr 3
310
311 # Define here how many telnet connection attempts in how many seconds from
312 # the same host constitute a flood. The correct format is Attempts:Seconds.
313 set telnet-flood 5:60
314
315 # If you want telnet-flood to apply even to +f users, set this setting to 1.
316 set paranoid-telnet-flood 1
317
318 # Set here the amount of seconds before giving up on hostname/address
319 # lookup (you might want to increase this if you are on a slow network).
320 set resolve-timeout 15
321
322
323 ##### MORE ADVANCED SETTINGS #####
324
325 # Set this to your proxy host if your Eggdrop sits behind a firewall. If
326 # you use a Sun "telnet passthru" firewall, prefix the host with a '!'. If
327 # you use an HTTP proxy, prefix the host with a '@'. If you use a socks4
328 # proxy, don't use a prefix. These are the only supported types of proxies.
329 #set firewall "!my-sub-passthru.org:3666"
330 #set firewall "@my-http-proxy.org:8080"
331 #set firewall "my-socks4-proxy.org:1080"
332
333 # If you have a NAT firewall (you box has an IP in one of the following
334 # ranges: 192.168.0.0-192.168.255.255, 172.16.0.0-172.31.255.255,
335 # 10.0.0.0-10.255.255.255 and your firewall transparently changes your
336 # address to a unique address for your box) or you have IP masquerading
337 # between you and the rest of the world, and /dcc chat, /ctcp chat or
338 # userfile sharing aren't working, enter your outside IP here. Do not
339 # enter anything for my-ip or my-hostname if you use this setting.
340 #set nat-ip "127.0.0.1"
341
342 # If you want all dcc file transfers to use a particular portrange either
343 # because you're behind a firewall, or for other security reasons, set it
344 # here.
345 #set reserved-portrange 2010:2020
346
347 # Set the time in minutes that temporary ignores should last.
348 set ignore-time 15
349
350 # Define here what Eggdrop considers 'hourly'. All calls to it, including such
351 # things as note notifying or userfile saving, are affected by this.
352 # For example:
353 #
354 # set hourly-updates 15
355 #
356 # The bot will save its userfile 15 minutes past every hour.
357 set hourly-updates 00
358
359 # Un-comment the next line and set the list of owners of the bot.
360 # You NEED to change this setting.
361 #set owner "MrLame, MrsLame"
362
363 # Who should a note be sent to when new users are learned?
364 set notify-newusers "$owner"
365
366 # Enter the flags that all new users should get by default. See '.help whois'
367 # on the partyline for a list of flags and their descriptions.
368 set default-flags "hp"
369
370 # Enter all user-defined fields that should be displayed in a '.whois'.
371 # This will only be shown if the user has one of these extra fields.
372 # You might prefer to comment this out and use the userinfo1.0.tcl script
373 # which provides commands for changing all of these.
374 set whois-fields "url birthday"
375
376 # Enable this setting if you want your Eggdrop to die upon receiving a SIGHUP
377 # kill signal. Otherwise, the Eggdrop will just save its userfile and rehash.
378 set die-on-sighup 0
379
380 # Enable this setting if you want your Eggdrop to die upon receiving a SIGTERM
381 # kill signal. Otherwise, the Eggdrop will just save its userfile and rehash.
382 set die-on-sigterm 1
383
384 # Comment these two lines if you wish to enable the .tcl and .set commands.
385 # If you select your owners wisely, you should be okay enabling these.
386 unbind dcc n tcl *dcc:tcl
387 unbind dcc n set *dcc:set
388
389 # If you enable this setting, only permanent owners (owner setting) will be
390 # able to use .tcl and .set. Moreover, if you want only let permanent owners
391 # use .dump, then set this to 2.
392 set must-be-owner 1
393
394 # Comment out this line to add the 'simul' partyline command (owners can
395 # manipulate other people on the party line). Please select owners wisely
396 # and use this command ethically!
397 unbind dcc n simul *dcc:simul
398
399 # Set here the maximum number of dcc connections you will allow. You can
400 # increase this later, but never decrease it.
401 set max-dcc 50
402
403 # Enable this setting if you want +d & +k users to use commands bound as -|-.
404 set allow-dk-cmds 1
405
406 # If your Eggdrop rejects bots that actually have already disconnected from
407 # another hub, but the disconnect information has not yet spread over the
408 # botnet due to lag, use this setting. The bot will wait dupwait-timeout
409 # seconds before it checks again and then finally reject the bot.
410 set dupwait-timeout 5
411
412 # You MUST remove this line for your bot to start. This has been added to
413 # prevent you from starting up a bot that is not fully configured. Bots
414 # that have not been fully configured may join the wrong IRC network, the
415 # wrong channels, or generally do things that you do not want. Please make
416 # sure that you have double-checked every setting. There's also a similar line
417 # lower down, just to make sure you're reading :)
418 die "Please make sure you edit your config file completely."
419
420
421 ##### MODULES #####
422
423 # Below are various settings for the modules included with Eggdrop.
424 # PLEASE READ AND EDIT THEM CAREFULLY, even if you're an old hand at
425 # Eggdrop, things change.
426
427 # This path specifies the path were Eggdrop should look for its modules.
428 # If you run the bot from the compilation directory, you will want to set
429 # this to "". If you use 'make install' (like all good kiddies do ;), this
430 # is a fine default. Otherwise, use your head :)
431 set mod-path "modules/"
432
433
434 #### DNS MODULE ####
435
436 # This module provides asynchronous dns support. This will avoid long
437 # periods where the bot just hangs there, waiting for a hostname to
438 # resolve, which will often let it timeout on all other connections.
439 loadmodule dns
440
441
442 #### CHANNELS MODULE ####
443
444 # This module provides channel related support for the bot. Without it,
445 # you won't be able to make the bot join a channel or save channel
446 # specific userfile information.
447 loadmodule channels
448
449 # Enter here the filename where dynamic channel settings are stored.
450 set chanfile "LamestBot.chan"
451
452 # Set this setting to 1 if you want your bot to expire bans/exempts/invites set
453 # by other opped bots on the channel.
454 set force-expire 0
455
456 # Set this setting to 1 if you want your bot to share user greets with other
457 # bots on the channel if sharing user data.
458 set share-greet 0
459
460 # Set this setting to 1 if you want to allow users to store an info line.
461 set use-info 1
462
463 # The following settings are used as default values when you .+chan #chan or .tcl
464 # channel add #chan. Look in the section below for explanation of every option.
465
466 set global-flood-chan 10:60
467 set global-flood-deop 3:10
468 set global-flood-kick 3:10
469 set global-flood-join 5:60
470 set global-flood-ctcp 3:60
471 set global-flood-nick 5:60
472 set global-aop-delay 5:30
473 set global-idle-kick 0
474 set global-chanmode "nt"
475 set global-stopnethack-mode 0
476 set global-revenge-mode 0
477 set global-ban-time 120
478 set global-exempt-time 60
479 set global-invite-time 60
480
481 set global-chanset {
482 -autoop -autovoice
483 -bitch +cycle
484 +dontkickops +dynamicbans
485 +dynamicexempts +dynamicinvites
486 -enforcebans +greet
487 -inactive -nodesynch
488 -protectfriends +protectops
489 -revenge -revengebot
490 -secret -seen
491 +shared +statuslog
492 +userbans +userexempts
493 +userinvites -protecthalfops
494 -autohalfop
495 }
496
497 # Add each static channel you want your bot to sit in using the following
498 # command. There are many different possible settings you can insert into
499 # this command, which are explained below.
500 #
501 # channel add #lamest {
502 # chanmode "+nt-likm"
503 # idle-kick 0
504 # stopnethack-mode 0
505 # revenge-mode 0
506 # ban-time 120
507 # exempt-time 60
508 # invite-time 60
509 # aop-delay 5:30
510 # need-op { putserv "PRIVMSG #lamest :op me cos i'm lame!" }
511 # need-invite { putserv "PRIVMSG #lamest :let me in!" }
512 # need-key { putserv "PRIVMSG #lamest :let me in!" }
513 # need-unban { putserv "PRIVMSG #lamest :let me in!" }
514 # need-limit { putserv "PRIVMSG #lamest :let me in!" }
515 # flood-chan 10:60
516 # flood-deop 3:10
517 # flood-kick 3:10
518 # flood-join 5:60
519 # flood-ctcp 3:60
520 # flood-nick 5:60
521 # }
522 #
523 # chanmode +/-<modes>
524 # This setting makes the bot enforce channel modes. It will always add
525 # the +<modes> and remove the -<modes> modes.
526 # idle-kick 0
527 # This setting will make the bot check every minute for idle
528 # users. Set this to 0 to disable idle check.
529 #
530 # stopnethack-mode 0
531 # This setting will make the bot de-op anyone who enters the channel
532 # with serverops. There are seven different modes for this settings:
533 # 0 turn off,
534 # 1 isoptest (allow serverop if registered op)
535 # 2 wasoptest (allow serverop if op before split)
536 # 3 allow serverop if isop or wasop
537 # 4 allow serverop if isop and wasop.
538 # 5 If the channel is -bitch, see stopnethack-mode 3
539 # If the channel is +bitch, see stopnethack-mode 1
540 # 6 If the channel is -bitch, see stopnethack-mode 2
541 # If the channel is +bitch, see stopnethack-mode 4
542 #
543 # revenge-mode 0
544 # This settings defines how the bot should punish bad users when
545 # revenging. There are four possible settings:
546 # 0 Deop the user.
547 # 1 Deop the user and give them the +d flag for the channel.
548 # 2 Deop the user, give them the +d flag for the channel, and kick them.
549 # 3 Deop the user, give them the +d flag for the channel, kick, and ban them.
550 #
551 # ban-time 120
552 # Set here how long temporary bans will last (in minutes). If you
553 # set this setting to 0, the bot will never remove them.
554 #
555 # exempt-time 60
556 # Set here how long temporary exempts will last (in minutes). If you
557 # set this setting to 0, the bot will never remove them. The bot will
558 # check the exempts every X minutes, but will not remove the exempt if
559 # a ban is set on the channel that matches that exempt. Once the ban is
560 # removed, then the exempt will be removed the next time the bot checks.
561 # Please note that this is an IRCnet feature.
562 #
563 # invite-time 60
564 # Set here how long temporary invites will last (in minutes). If you
565 # set this setting to 0, the bot will never remove them. The bot will
566 # check the invites every X minutes, but will not remove the invite if
567 # a channel is set to +i. Once the channel is -i then the invite will be
568 # removed the next time the bot checks. Please note that this is an IRCnet
569 # feature.
570 #
571 # aop-delay (minimum:maximum)
572 # This is used for autoop, autohalfop, autovoice. If an op or voice joins a
573 # channel while another op or voice is pending, the bot will attempt to put
574 # both modes on one line.
575 # aop-delay 0 No delay is used.
576 # aop-delay X An X second delay is used.
577 # aop-delay X:Y A random delay between X and Y is used.
578 #
579 # need-op { putserv "PRIVMSG #lamest :op me cos i'm lame!" }
580 # This setting will make the bot run the script enclosed in brackets
581 # if it does not have ops. This must be shorter than 120 characters.
582 # If you use scripts like getops.tcl or botnetop.tcl, you don't need
583 # to set this setting.
584 #
585 # need-invite { putserv "PRIVMSG #lamest :let me in!" }
586 # This setting will make the bot run the script enclosed in brackets
587 # if it needs an invite to the channel. This must be shorter than 120
588 # characters. If you use scripts like getops.tcl or botnetop.tcl, you
589 # don't need to set this setting.
590 #
591 # need-key { putserv "PRIVMSG #lamest :let me in!" }
592 # This setting will make the bot run the script enclosed in brackets
593 # if it needs the key to the channel. This must be shorter than 120
594 # characters. If you use scripts like getops.tcl or botnetop.tcl, you
595 # don't need to set this setting
596 #
597 # need-unban { putserv "PRIVMSG #lamest :let me in!" }
598 # This setting will make the bot run the script enclosed in brackets
599 # if it needs to be unbanned on the channel. This must be shorter than
600 # 120 characters. If you use scripts like getops.tcl or botnetop.tcl,
601 # you don't need to set this setting
602 #
603 # need-limit { putserv "PRIVMSG #lamest :let me in!" }
604 # This setting will make the bot run the script enclosed in brackets
605 # if it needs the limit to be raised on the channel. This must be
606 # shorter than 120 characters. If you use scripts like getops.tcl or
607 # botnetop.tcl, you don't need to set this setting
608 #
609 # flood-chan 10:60
610 # Set here how many channel messages in how many seconds from one
611 # host constitutes a flood. Setting this to 0 or 0:0 disables
612 # flood protection for the channel.
613 #
614 # flood-deop 3:10
615 # Set here how many deops in how many seconds from one host constitutes
616 # a flood. Setting this to 0 or 0:0 disables deop flood protection for
617 # the channel.
618 #
619 # flood-kick 3:10
620 # Set here how many kicks in how many seconds from one host constitutes
621 # a flood. Setting this to 0 or 0:0 disables kick flood protection for
622 # the channel.
623 #
624 # flood-join 5:60
625 # Set here how many joins in how many seconds from one host constitutes
626 # a flood. Setting this to 0 or 0:0 disables join flood protection for
627 # the channel.
628 #
629 # flood-ctcp 3:60
630 # Set here how many channel ctcps in how many seconds from one host
631 # constitutes a flood. Setting this to 0 or 0:0 disables ctcp flood
632 # protection for the channel.
633 #
634 # flood-nick 5:60
635 # Set here how many nick changes in how many seconds from one host
636 # constitutes a flood. Setting this to 0 or 0:0 disables nick flood
637 # protection for the channel.
638 #
639 # There are many different options for channels which you can
640 # define. They can be enabled or disabled using the channel set command by a
641 # plus or minus in front of them.
642 #
643 # channel set #lamest +enforcebans +dynamicbans +userbans +dynamicexempts
644 # channel set #lamest +userexempts +dynamicinvites +userinvites +protectops
645 # channel set #lamest +protectfriends +statuslog +revenge -protecthalfops
646 # channel set #lamest +revengebot +dontkickops +autovoice -autoop -autohalfop
647 # channel set #lamest -bitch -secret -shared +greet +cycle
648 #
649 # A complete list of all available channel settings:
650 #
651 # enforcebans
652 # When a ban is set, kick people who are on the channel and match
653 # the ban?
654 #
655 # dynamicbans
656 # Only activate bans on the channel when necessary? This keeps
657 # the channel's ban list from getting excessively long. The bot
658 # still remembers every ban, but it only activates a ban on the
659 # channel when it sees someone join who matches that ban.
660 #
661 # userbans
662 # Allow bans to be made by users directly? If turned off, the bot
663 # will require all bans to be made through the bot's console.
664 #
665 # dynamicexempts
666 # Only activate exempts on the channel when necessary? This keeps
667 # the channel's exempt list from getting excessively long. The bot
668 # still remembers every exempt, but it only activates a exempt on
669 # the channel when it sees a ban set that matches the exempt. The
670 # exempt remains active on the channel for as long as the ban is
671 # still active.
672 #
673 # userexempts
674 # Allow exempts to be made by users directly? If turned off, the
675 # bot will require all exempts to be made through the bot's console.
676 #
677 # dynamicinvites
678 # Only activate invites on the channel when necessary? This keeps
679 # the channel's invite list from getting excessively long. The bot
680 # still remembers every invite, but the invites are only activated
681 # when the channel is set to invite only and a user joins after
682 # requesting an invite. Once set, the invite remains until the
683 # channel goes to -i.
684 #
685 # userinvites
686 # Allow invites to be made by users directly? If turned off, the
687 # bot will require all invites to be made through the bot's console.
688 #
689 # autoop
690 # Op users with the +o flag as soon as they join the channel?
691 # This is insecure and not recommended.
692 #
693 # autohalfop
694 # Halfop users with the +l flag as soon as they join the channel?
695 # This is insecure and not recommended.
696 #
697 # bitch
698 # Only let users with +o) flag be opped on the channel?
699 #
700 # greet
701 # Say a user's info line when they join the channel?
702 #
703 # protectops
704 # Re-op a user with the +o flag if they get deopped?
705 #
706 # protecthalfops
707 # Re-halfop a user with the +l flag if they get dehalfopped?
708 #
709 # protectfriends
710 # Re-op a user with the +f flag if they get deopped?
711 #
712 # statuslog
713 # Log the channel status line every 5 minutes? This shows the bot's
714 # status on the channel (op, voice, etc.), the channel's modes, and
715 # the number of +m/+o/+v/+n/+b/+e/+I users on the channel. A sample
716 # status line follows:
717 #
718 # [01:40] @#lamest (+istn) : [m/1 o/1 v/4 n/7 b/1 e/5 I/7]
719 #
720 # revenge
721 # Remember people who deop/kick/ban the bot, valid ops, or friends
722 # and punish them? Users with the +f flag are exempt from revenge.
723 #
724 # revengebot
725 # This is similar to to the 'revenge' option, but it only triggers
726 # if a bot gets deopped, kicked or banned.
727 #
728 # autovoice
729 # Voice users with the +v flag when they join the channel?
730 #
731 # secret
732 # Prevent this channel from being listed on the botnet?
733 #
734 # shared
735 # Share channel-related user info for this channel?
736 #
737 # cycle
738 # Cycle the channel when it has no ops?
739 #
740 # dontkickops
741 # Do you want the bot not to be able to kick users who have the +o
742 # flag, letting them kick-flood for instance to protect the channel
743 # against clone attacks.
744 #
745 # inactive
746 # This prevents the bot from joining the channel (or makes it leave
747 # the channel if it is already there). It can be useful to make the
748 # bot leave a channel without losing its settings, channel-specific
749 # user flags, channel bans, and without affecting sharing.
750 #
751 # seen
752 # Respond to seen requests in the channel? The seen module must be
753 # loaded for this to work.
754 #
755 # nodesynch
756 # Allow non-ops to perform channel modes? This can stop the bot from
757 # fighting with services such as ChanServ, or from kicking IRCops when
758 # setting channel modes without having ops.
759 #
760 # Here is a shorter example:
761 #
762 # channel add #botcentral {
763 # chanmode "+mntisl 1"
764 # idle-kick 1
765 # }
766 # channel set #botcentral +bitch +enforcebans -greet +revenge
767
768
769 #### SERVER MODULE ####
770
771 # This module provides the core server support. You have to load this
772 # if you want your bot to come on IRC. Not loading this is equivalent
773 # to the old NO_IRC define.
774 loadmodule server
775
776 # What is your network?
777 # 0 = EFnet
778 # 1 = IRCnet
779 # 2 = Undernet
780 # 3 = DALnet
781 # 4 = +e/+I/max-modes 20 Hybrid
782 # 5 = Others
783 set net-type 0
784
785 # Set the nick the bot uses on IRC, and on the botnet unless you specify a
786 # separate botnet-nick, here.
787 set nick "Lamestbot"
788
789 # Set the alternative nick which the bot uses on IRC if the nick specified
790 # by 'set nick' is unavailable. All '?' characters will be replaced by random
791 # numbers.
792 set altnick "Llamab?t"
793
794 # Set what should be displayed in the real-name field for the bot on IRC.
795 set realname "/msg LamestBot hello"
796
797 # This is a Tcl script to be run immediately after connecting to a server.
798 bind evnt - init-server evnt:init_server
799
800 proc evnt:init_server {type} {
801 global botnick
802 putquick "MODE $botnick +i-ws"
803 }
804
805 # Set the default port which should be used if none is specified with
806 # '.jump' or in 'set servers'.
807 set default-port 6667
808
809 # This is the bot's server list. The bot will start at the first server listed,
810 # and cycle through them whenever it gets disconnected. You need to change these
811 # servers to YOUR network's servers.
812 #
813 # The format is:
814 # server[:port[:password]]
815 #
816 # Both the port and password fields are optional; however, if you want to set a
817 # password you must also set a port. If a port isn't specified it will default to
818 # your default-port setting.
819 set servers {
820 you.need.to.change.this:6667
821 another.example.com:7000:password
822 }
823
824 # This setting makes the bot try to get his original nickname back if its
825 # primary nickname is already in use.
826 set keep-nick 1
827
828 # Set this to 0 if you want eggdrop to translate all ident prefixes, so in
829 # userlist there will be only one prefix '~' which means that there is no ident
830 # working and can be spoofed.
831 set strict-ident 1
832
833 # This setting makes the bot squelch the error message when rejecting a DCC
834 # CHAT, SEND or message command. Normally, Eggdrop notifies the user that the
835 # command has been rejected because they don't have access. Note that sometimes
836 # IRC server operators detect bots that way.
837 set quiet-reject 1
838
839 # If you want your bot to answer lower case ctcp requests (non rfc-
840 # compliant), set this setting to 1. mIRC will do this, most other
841 # clients will not.
842 set lowercase-ctcp 0
843
844 # Set how many ctcps should be answered at once.
845 set answer-ctcp 3
846
847 # Set here how many msgs in how many seconds from one host constitutes
848 # a flood. If you set this to 0:0, msg flood protection will be disabled.
849 set flood-msg 5:60
850
851 # Set here how many ctcps in how many seconds from one host constitutes
852 # a flood. If you set this to 0:0, ctcp flood protection will be disabled.
853 set flood-ctcp 3:60
854
855 # This settings makes the bot cycle forever through the server list until
856 # it successfully connects to one.
857 set never-give-up 1
858
859 # This setting defines how long Eggdrop should wait before moving from one
860 # server to another on disconnect. If you set 0 here, Eggdrop will not wait
861 # at all and will connect instantly. Setting this too low could result in
862 # your bot being K:Lined.
863 set server-cycle-wait 60
864
865 # Set here how long Eggdrop should wait for a response when connecting to a
866 # server before giving up and moving on to next server.
867 set server-timeout 60
868
869 # If the number of servers on the net gets below this number, the bot
870 # will jump to a new server (it will assume it's on the losing end of
871 # a netsplit). Set this to 0 to turn off. If your bot is running on
872 # any major IRC network, this should probably be turned off.
873 set servlimit 0
874
875 # Set this to 1 if Eggdrop should check for stoned servers? (where the
876 # server connection has died, but Eggdrop hasn't been notified yet).
877 set check-stoned 1
878
879 # If you want your bot to exit the server if it receives an ERROR message,
880 # set this to 1.
881 set serverror-quit 1
882
883 # Set here the maximum number of lines to queue to the server. If you're
884 # going to dump large chunks of text to people over IRC, you will probably
885 # want to raise this. 300 is fine for most people though.
886 set max-queue-msg 300
887
888 # If you want Eggdrop to trigger binds for ignored users, set this to 1.
889 set trigger-on-ignore 0
890
891 # Allow identical messages in the mode queue?
892 set double-mode 1
893
894 # Allow identical messages in the server queue?
895 set double-server 1
896
897 # Allow identical messages in the help queue?
898 set double-help 1
899
900 # This optimizes the kick queue. It also traces nick changes and parts in
901 # the channel and changes the kick queue accordingly. There are three
902 # different options for this setting:
903 # 0 = Turn it off.
904 # 1 = Optimize the kick queue by summarizing kicks.
905 # 2 = Trace nick changes and parts on the channel and change the queue
906 # accordingly. For example, bot will not try to kick users who have
907 # already parted the channel.
908 # ATTENTION: Setting 2 is very CPU intensive.
909 set optimize-kicks 1
910
911 # If your network supports more recipients per command then 1, you can
912 # change this behavior here. Set this to the number of recipients per
913 # command, or set this to 0 for unlimited.
914 set stack-limit 4
915
916 ### SERVER MODULE - OTHER NETWORKS (net-type 5) ###
917
918 # This settings defines how umode +r is understood by Eggdrop. Some networks
919 # use +r to indicate a restricted connection. If this is your case, and you
920 # want your bot to leave restricted servers and jump to the next server on its
921 # list, then set it to 1.
922 #set check-mode-r 1
923
924 # This setting allows you to specify the maximum nick-length supported by your
925 # network. The default setting is 9. The maximum supported length by Eggdrop
926 # is 32.
927 #set nick-len 9
928
929 #### CTCP MODULE ####
930
931 # This module provides the normal ctcp replies that you'd expect.
932 # Without it loaded, CTCP CHAT will not work. The server module
933 # is required for this module to function.
934 loadmodule ctcp
935
936 # Set here how the ctcp module should answer ctcps. There are 3 possible
937 # operating modes:
938 # 0: Normal behavior is used.
939 # 1: The bot ignores all ctcps, except for CHAT and PING requests
940 # by users with the +o flag.
941 # 2: Normal behavior is used, however the bot will not answer more
942 # than X ctcps in Y seconds (defined by 'set flood-ctcp').
943 set ctcp-mode 0
944
945 # There are also several variables to help make your bot less noticeable.
946 # They are: ctcp-version, ctcp-finger, and ctcp-userinfo. You can use set to set
947 # them to values you'd like.
948
949
950 #### IRC MODULE ####
951
952 # This module provides basic IRC support for your bot. You have to
953 # load this if you want your bot to come on IRC. The server and channels
954 # modules must be loaded for this module to function.
955 loadmodule irc
956
957 # Set this to 1 if you want to bounce all server bans.
958 set bounce-bans 1
959
960 # Set this to 1 if you want to bounce all server exemptions (+e modes).
961 # This is disabled if use-exempts is disabled.
962 set bounce-exempts 0
963
964 # Set this to 1 if you want to bounce all server invitations (+I modes).
965 # This is disabled if use-invites is disabled.
966 set bounce-invites 0
967
968 # Set this to 1 if you want to bounce all server modes.
969 set bounce-modes 0
970
971 # Set here the maximum number of bans you want the bot to set on a channel.
972 # Eggdrop will not place any more bans if this limit is reached. Undernet
973 # currently allows 45 bans, IRCnet allows 30, EFnet allows 100, and DALnet
974 # allows 100.
975 set max-bans 30
976
977 # Set here the maximum number of exempts you want Eggdrop to set on a channel.
978 # Eggdrop will not place any more exempts if this limit is reached.
979 set max-exempts 20
980
981 # Set here the maximum number of invites you want Eggdrop to set on a channel.
982 # Eggdrop will not place any more invites if this limit is reached.
983 set max-invites 20
984
985 # There is a global limit for +b/+e/+I modes. This limit should be set to
986 # the same value as max-bans for networks that do not support +e/+I.
987 set max-modes 30
988
989 # The following settings should be left commented unless the default values
990 # are being overridden. By default, exempts and invites are on for EFnet and
991 # IRCnet, but off for all other large networks. This behavior can be modified
992 # with the following 2 flags. If your network doesn't support +e/+I modes then
993 # you will be unable to use these features.
994 #
995 # Do you want to enable exempts (+e modes)?
996 #set use-exempts 0
997
998 # Do you want to enable invites (+I modes)?
999 #set use-invites 0
1000
1001 # Set this to 1 if you want the bot to kick for control character/ctcp
1002 # avalanches to a channel. Remember that if it does, it won't ban them.
1003 # This can start kick floods.
1004 set kick-fun 0
1005
1006 # Set this to 1 if you want the bot to ban for control character/ctcp
1007 # avalanches to a channel. This can prevent kick floods, but it also can
1008 # fill the banlist.
1009 set ban-fun 0
1010
1011 # If you want people to be able to add themselves to the bot's userlist
1012 # with the default userflags (defined above in the config file) via the
1013 # 'hello' msg command, set this to 1.
1014 set learn-users 0
1015
1016 # Set here the time (in seconds) to wait for someone to return from a netsplit
1017 # (i.e. wasop will expire afterwards). Set this to 1500 on IRCnet since its
1018 # nick delay stops after 30 minutes.
1019 set wait-split 600
1020
1021 # Set here the time (in seconds) that someone must have been off-channel
1022 # before re-displaying their info line.
1023 set wait-info 180
1024
1025 # Set this to the maximum number of bytes to send in the arguments
1026 # of modes sent to the server. Most servers default this to 200.
1027 set mode-buf-length 200
1028
1029 # Many IRCops find bots by seeing if they reply to 'hello' in a msg.
1030 # You can change this to another word by un-commenting the following
1031 # two lines and changing "myword" to the word wish to use instead of
1032 # 'hello'. It must be a single word.
1033 #unbind msg - hello *msg:hello
1034 #bind msg - myword *msg:hello
1035
1036 # Many takeover attempts occur due to lame users blindly /msg ident'ing to
1037 # the bot and attempting to guess passwords. We now unbind this command by
1038 # default to discourage them. You can enable these commands by commenting the
1039 # following two lines.
1040 unbind msg - ident *msg:ident
1041 unbind msg - addhost *msg:addhost
1042
1043 # Some IRC servers are using some non-standard op-like channel prefixes/modes.
1044 # Define them here so the bot can recognize them. Just "@" should be fine for
1045 # most networks. Un-comment the second line for some UnrealIRCds.
1046
1047 set opchars "@"
1048 #set opchars "@&~"
1049
1050 # If you are so lame you want the bot to display peoples info lines, even
1051 # when you are too lazy to add their chanrecs to a channel, set this to 1.
1052 # *NOTE* This means *every* user with an info line will have their info
1053 # line displayed on EVERY channel they join (provided they have been gone
1054 # longer than wait-info).
1055 set no-chanrec-info 0
1056
1057 ### IRC MODULE - IRCnet SPECIFIC FEATURES (net-type 1) ###
1058
1059 # Attention: Use these settings *only* if you set 'net-type' to 1!
1060
1061 # At the moment, the current IRCnet IRCd version (2.10) doesn't support the
1062 # mixing of b, o and v modes with e and I modes. This might be changed in the
1063 # future, so use 1 at the moment for this setting.
1064 set prevent-mixing 1
1065
1066 ### IRC MODULE - OTHER NETWORKS (net-type 5) ###
1067
1068 # Attention: Use these settings *only* if you set 'net-type' to 5!
1069
1070 # If your network supports more users per kick command then 1, you can
1071 # change this behavior here. Set this to the number of users to kick at
1072 # once, or set this to 0 for all at once.
1073 #set kick-method 1
1074
1075 # Some networks allow you to stack lots of channel modes into one line.
1076 # They're all guaranteed to support at least 3, so that's the default.
1077 # If you know your network supports more, you may want to adjust this.
1078 # This setting is limited to 6, although if you want to use a higher value,
1079 # you can modify this by changing the value of MODES_PER_LINE_MAX in
1080 # src/chan.h and recompiling the bot.
1081 #set modes-per-line 3
1082
1083 # Some networks don't include the +l limit and +k or -k key modes
1084 # in the modes-per-line (see above) limitation. Set include-lk to 0 for
1085 # these networks.
1086 #set include-lk 1
1087
1088 # Set this to 1 if your network uses IRCu2.10.01 specific /who requests.
1089 # Eggdrop can, therefore, ask only for exactly what's needed.
1090 #set use-354 0
1091
1092 # If your network doesn't use rfc 1459 compliant string matching routines,
1093 # set this to 0.
1094 #set rfc-compliant 1
1095
1096
1097 #### TRANSFER MODULE ####
1098
1099 # The transfer module provides DCC SEND/GET support and userfile transfer
1100 # support for userfile sharing. Un-comment the next line to load it if you
1101 # need this functionality.
1102 #loadmodule transfer
1103
1104 # Set here the maximum number of simultaneous downloads to allow for
1105 # each user.
1106 set max-dloads 3
1107
1108 # Set here the block size for dcc transfers. ircII uses 512 bytes,
1109 # but admits that it may be too small. 1024 is standard these days.
1110 # 0 is turbo-dcc (recommended).
1111 set dcc-block 0
1112
1113 # Enable this setting if you want to copy files into the /tmp directory
1114 # before sending them. This is useful on most systems for file stability,
1115 # but if your directories are NFS mounted, it's a pain, and you'll want
1116 # to set this to 0. If you are low on disk space, you may also want to
1117 # set this to 0.
1118 set copy-to-tmp 1
1119
1120 # Set here the time (in seconds) to wait before an inactive transfer times out.
1121 set xfer-timeout 30
1122
1123
1124 #### SHARE MODULE ####
1125
1126 # This module provides userfile sharing support between two directly
1127 # linked bots. The transfer and channels modules are required for this
1128 # module to correctly function. Un-comment the following line to load
1129 # the share module.
1130 #loadmodule share
1131
1132 # Settings in this section must be un-commented before setting.
1133
1134 # When two bots get disconnected, this setting allows them to create a
1135 # resync buffer which saves all changes done to the userfile during
1136 # the disconnect. When they reconnect, they will not have to transfer
1137 # the complete user file, but, instead, just send the resync buffer.
1138 #
1139 # NOTE: This has been known to cause loss of channel flags and other
1140 # problems. Using this setting is not recommended.
1141 #set allow-resync 0
1142
1143 # This setting specifies how long to hold another bots resync data
1144 # before flushing it.
1145 #set resync-time 900
1146
1147 # When sharing user lists, DON'T ACCEPT global flag changes from other bots?
1148 # NOTE: The bot will still send changes made on the bot, it just won't accept
1149 # any global flag changes from other bots. This overrides the private-globals
1150 # setting (below).
1151 #set private-global 0
1152
1153 # When sharing user lists, if private-global isn't set, which global flag
1154 # changes from other bots should be ignored?
1155 #set private-globals "mnot"
1156
1157 # When sharing user lists, don't accept ANY userfile changes from other
1158 # bots? Paranoid people should use this feature on their hub bot. This
1159 # will force all userlist changes to be made via the hub.
1160 #set private-user 0
1161
1162 # This setting makes the bot discard its own bot records in favor of
1163 # the ones sent by the hub.
1164 # NOTE: No passwords or botflags are shared, only ports and
1165 # address are added to sharing procedure. This only works with hubs that
1166 # are v1.5.1 or higher.
1167 #set override-bots 0
1168
1169
1170 #### COMPRESS MODULE ####
1171
1172 # This module provides provides support for file compression. This allows the
1173 # bot to transfer compressed user files and therefore save a significant amount
1174 # of bandwidth. The share module must be loaded to load this module. Un-comment
1175 # the following line to the compress module.
1176 #loadmodule compress
1177
1178 # Allow compressed sending of user files? The user files are compressed with
1179 # the compression level defined in `compress-level'.
1180 set share-compressed 1
1181
1182 # This is the default compression level used. These levels are the same as
1183 # those used by GNU gzip.
1184 #set compress-level 9
1185
1186
1187 #### FILESYSTEM MODULE ####
1188
1189 # This module provides an area within the bot where users can store and
1190 # manage files. With this module, the bot is usable as a file server. The
1191 # transfer module is required for this module to function. Un-comment
1192 # the following line to load the filesys module.
1193 #loadmodule filesys
1194
1195 # Set here the 'root' directory for the file system.
1196 set files-path "/home/mydir/filesys"
1197
1198 # If you want to allow uploads, set this to the directory uploads
1199 # should be put into. Set this to "" if you don't want people to
1200 # upload files to your bot.
1201 set incoming-path "/home/mydir/filesys/incoming"
1202
1203 # If you don't want to have a central incoming directory, but instead
1204 # want uploads to go to the current directory that a user is in, set
1205 # this setting to 1.
1206 set upload-to-pwd 0
1207
1208 # Eggdrop creates a '.filedb' file in each subdirectory of your file area
1209 # to keep track of its own file system information. If you can't do that (for
1210 # example, if the dcc path isn't owned by you, or you just don't want it to do
1211 # that) specify a path here where you'd like all of the database files to be
1212 # stored instead.
1213 set filedb-path ""
1214
1215 # Set here the maximum number of people that can be in the file area at once.
1216 # Setting this to 0 makes it effectively infinite.
1217 set max-file-users 20
1218
1219 # Set here the maximum allowable file size that will be received (in KB).
1220 # Setting this to 0 makes it effectively infinite.
1221 set max-filesize 1024
1222
1223
1224 #### NOTES MODULE ####
1225
1226 # This module provides support for storing of notes for users from each other.
1227 # Note sending between currently online users is supported in the core, this is
1228 # only for storing the notes for later retrieval.
1229 loadmodule notes
1230
1231 # Set here the filename where private notes between users are stored.
1232 set notefile "LamestBot.notes"
1233
1234 # Set here the maximum number of notes to allow to be stored for each user
1235 # (to prevent flooding).
1236 set max-notes 50
1237
1238 # Set here how long (in days) to store notes before expiring them.
1239 set note-life 60
1240
1241 # Set this to 1 if you want to allow users to specify a forwarding address
1242 # for forwarding notes to another account on another bot.
1243 set allow-fwd 0
1244
1245 # Set this to 1 if you want the bot to let people know hourly if they have
1246 # any notes.
1247 set notify-users 1
1248
1249 # Set this to 1 if you want the bot to let people know on join if they have
1250 # any notes.
1251 set notify-onjoin 1
1252
1253 # Comment out this next line. Otherwise, your bot won't start.
1254 die "You didn't edit your config file completely like you were told, did you?"
1255
1256
1257 #### CONSOLE MODULE ####
1258
1259 # This module provides storage of console settings when you exit the
1260 # bot or type .store on the partyline.
1261 loadmodule console
1262
1263 # Save users console settings automatically? Otherwise, they have
1264 # to use the .store command.
1265 set console-autosave 1
1266
1267 # If a user doesn't have any console settings saved, which channel
1268 # do you want them automatically put on?
1269 set force-channel 0
1270
1271 # Enable this setting if a user's global info line should be displayed
1272 # when they join a botnet channel.
1273 set info-party 0
1274
1275
1276 #### WOOBIE MODULE ####
1277
1278 # This is for demonstrative purposes only. If you are looking for starting
1279 # point in writing modules, woobie is the right thing.
1280 #loadmodule woobie
1281
1282
1283 #### SEEN MODULE ####
1284
1285 # This module provides very basic seen commands via msg, on channel or via dcc.
1286 # This module works only for users in the bot's userlist. If you are looking for
1287 # a better and more advanced seen module, try the gseen module by G'Quann. You
1288 # can find it at http://www.visions-of-fantasy.de/gseen.mod/.
1289 #loadmodule seen
1290
1291
1292 #### BLOWFISH MODULE ####
1293
1294 # IF YOU DON'T READ THIS YOU MAY RENDER YOUR USERFILE USELESS LATER
1295 # Eggdrop encrypts its userfile, so users can have secure passwords.
1296 # Please note that when you change your encryption method later (i.e.
1297 # using other modules like a md5 module), you can't use your current
1298 # userfile anymore. Eggdrop will not start without an encryption module.
1299 #loadmodule blowfish
1300
1301
1302 #### ASSOC MODULE ####
1303
1304 # This module provides assoc support, i.e. naming channels on the botnet.
1305 # You can load it by un-commenting the following line.
1306 #loadmodule assoc
1307
1308
1309 #### WIRE MODULE ####
1310
1311 # This module provides all the standard .wire commands via dcc. It is an
1312 # encrypted partyline communication tool, compatible with wire.tcl. An
1313 # encryption module must be loaded to use this module. Un-comment the
1314 # following line to load the wire module.
1315 #loadmodule wire
1316
1317 #### UPTIME MODULE ####
1318
1319 # This module reports uptime statistics to http://uptime.eggheads.org.
1320 # Go look and see what your uptime is! It takes about 9 hours to show up,
1321 # so if your bot isn't listed, try again later. The server module must be
1322 # loaded for this module to function.
1323 #
1324 # Information sent to the server includes the bot's uptime, botnet-nick,
1325 # server, version, and IP address. This information is stored in a temporary
1326 # logfile for debugging purposes only. The only publicly available information
1327 # will be the bot's botnet-nick, version and uptime. If you do not wish for this
1328 # information to be sent, comment out the following line.
1329 loadmodule uptime
1330
1331 ##### SCRIPTS #####
1332
1333 # This is a good place to load scripts to use with your bot.
1334
1335 # This line loads script.tcl from the scripts directory inside your Eggdrop's
1336 # directory. All scripts should be put there, although you can place them where
1337 # you like as long as you can supply a fully qualified path to them.
1338 #
1339 # source scripts/script.tcl
1340
1341 source scripts/alltools.tcl
1342 source scripts/action.fix.tcl
1343
1344 # Use this script for Tcl and Eggdrop downwards compatibility.
1345 # NOTE: This can also cause problems with some newer scripts.
1346 source scripts/compat.tcl
1347
1348 # This script provides many useful informational functions, like setting
1349 # users' URLs, e-mail address, ICQ numbers, etc. You can modify it to add
1350 # extra entries.
1351 source scripts/userinfo.tcl
1352 loadhelp userinfo.help

webmaster@eggheads.org
ViewVC Help
Powered by ViewVC 1.1.23