/[cvs]/eggdrop1.6/eggdrop.conf
ViewVC logotype

Contents of /eggdrop1.6/eggdrop.conf

Parent Directory Parent Directory | Revision Log Revision Log | View Revision Graph Revision Graph


Revision 1.59 - (show annotations) (download)
Thu Jan 7 13:48:30 2010 UTC (9 years, 5 months ago) by pseudo
Branch: MAIN
Changes since 1.58: +7 -1 lines
Added CIDR support to eggdrop. This includes accepting and matching b/e/I masks and user hosts in cidr notation.

Moved rfc_toupper from wild_match() to the new addr_match().

Added two new Tcl commands - matchaddr and matchcidr to provide interface to the new internal host matching.

Patch by: pseudo

1 #! /path/to/executable/eggdrop
2 # ^- This should contain a fully qualified path to your Eggdrop executable.
3 #
4 # $Id: eggdrop.conf,v 1.58 2009/11/23 09:42:01 pseudo Exp $
5 #
6 # This is a sample Eggdrop configuration file which includes all possible
7 # settings that can be used to configure your bot.
8 #
9 # The pound signs (#) that you see at the beginning of some lines mean that
10 # the remainder of that line is a comment, or just for your information. By
11 # adding or deleting pound signs, you can comment or uncomment a setting,
12 # respectively.
13 #
14 # Arguments for a command or setting may be inclosed in <>'s or []'s in the
15 # example/description. Arguments in <>'s are required, while [] means optional.
16 #
17 # More detailed descriptions of all these settings can be found in
18 # doc/settings/.
19
20
21
22 ##### BASIC SETTINGS #####
23
24 # This setting defines the username the bot uses on IRC. This setting has
25 # no effect if an ident daemon is running on your bot's machine.
26 set username "lamest"
27
28 # This setting defines which contact person should be shown in .status,
29 # /msg help, and other places. You really should include this information.
30 set admin "Lamer <email: lamer@lamest.lame.org>"
31
32 # This setting is used only for info to share with others on your botnet.
33 # Set this to the IRC network your bot is connected to.
34 set network "I.didn't.edit.my.config.file.net"
35
36 # This setting defines which timezone is your bot in. It's used for internal
37 # routines as well as for logfile timestamping and scripting purposes.
38 # The timezone string specifies the name of the timezone and must be three
39 # or more alphabetic characters. For example, Central European Time(UTC+1)
40 # should be "CET".
41 set timezone "EST"
42
43 # The offset setting specifies the time value to be added to the local
44 # time to get Coordinated Universal Time (UTC aka GMT). The offset is
45 # positive if the local timezone is west of the Prime Meridian and
46 # negative if it is east. The value (in hours) must be between -23 and
47 # 23. For example, if the timezone is UTC+1, the offset is -1.
48 set offset "5"
49
50 # If you don't want to use the timezone setting for scripting purposes only,
51 # but instead everywhere possible, un-comment the following line.
52 #set env(TZ) "$timezone $offset"
53
54 # If you're using virtual hosting (your machine has more than 1 IP), you
55 # may want to specify the particular IP to bind to. You can specify either
56 # by hostname or by IP. You may also want to set the hostname here if
57 # Eggdrop has trouble detecting it when it starts up.
58 #set my-hostname "virtual.host.com"
59 #set my-ip "99.99.0.0"
60
61 # If you want to have your Eggdrop messages displayed in a language other
62 # than English, change this setting to match your preference. An alternative
63 # would be to set the environment variable EGG_LANG to that value.
64 #
65 # Languages included with Eggdrop: Danish, English, French, Finnish, German.
66 #addlang "english"
67
68
69 ##### LOG FILES #####
70
71 # Eggdrop is capable of logging various things, from channel chatter to
72 # commands people use on the bot and file transfers. Logfiles are normally
73 # kept for 24 hours. Afterwards, they will be renamed to "(logfile).yesterday".
74 # After 48 hours, they will be overwritten by the logfile of the next day.
75 #
76 # Events are logged by certain categories. This way, you can specify
77 # exactly what kind of events you want sent to various logfiles.
78 #
79 # Logfile flags:
80 # b - information about bot linking and userfile sharing
81 # c - commands
82 # d - misc debug information
83 # h - raw share traffic
84 # j - joins, parts, quits, and netsplits on the channel
85 # k - kicks, bans, and mode changes on the channel
86 # m - private msgs, notices and ctcps to the bot
87 # o - misc info, errors, etc (IMPORTANT STUFF)
88 # p - public text on the channel
89 # r - raw incoming server traffic
90 # s - server connects, disconnects, and notices
91 # t - raw botnet traffic
92 # v - raw outgoing server traffic
93 # w - wallops (make sure the bot sets +w in init-server)
94 # x - file transfers and file-area commands
95 #
96 # Note that modes d, h, r, t, and v can fill disk quotas quickly. There are
97 # also eight user-defined levels (1-8) which can be used by Tcl scripts.
98 #
99 # Each logfile belongs to a certain channel. Events of type 'k', 'j', and 'p'
100 # are logged to whatever channel they happened on. Most other events are
101 # currently logged to every channel. You can make a logfile belong to all
102 # channels by assigning it to channel "*".
103
104 # This is the maximum number of logfiles allowed. This setting can be
105 # increased; however, don't decrease it.
106 set max-logs 5
107
108 # This is the maximum size of your logfiles. Set it to 0 to disable.
109 # This value is in kilobytes, so '550' would mean cycle logs when it
110 # reaches the size of 550 kilobytes. Note that this only works if you
111 # have keep-all-logs 0 (OFF).
112 set max-logsize 0
113
114 # This could be good if you have had problem with the logfile filling
115 # your quota/hard disk or if you log +p and publish it to the web and
116 # need more up-to-date info. Note that this setting might increase the
117 # CPU usage of your bot (on the other hand it will decrease your mem usage).
118 set quick-logs 0
119
120 # This setting allows you the logging of raw incoming server traffic via
121 # console/log flag 'r', raw outgoing server traffic via console/log mode 'v',
122 # raw botnet traffic via console/log mode 't', and raw share traffic via
123 # console/log mode 'h'. These flags can create a large security hole,
124 # allowing people to see user passwords. This is now restricted to +n users
125 # only. Please choose your owners with care.
126 set raw-log 0
127
128 # This creates a logfile named eggdrop.log containing private msgs/ctcps,
129 # commands, errors, and misc. info from any channel.
130 logfile mco * "logs/eggdrop.log"
131
132 # This creates a logfile named lamest.log containing joins, parts,
133 # netsplits, kicks, bans, mode changes, and public chat on the
134 # channel #lamest.
135 logfile jpk #lamest "logs/lamest.log"
136
137 # Use this feature to timestamp entries in the log file.
138 set log-time 1
139
140 # If you want to keep your logfiles forever, turn this setting on. All
141 # logfiles will get suffix ".[day, 2 digits][month, 3 letters][year, 4 digits]".
142 # Note that your quota/hard-disk might be filled by this, so check your
143 # logfiles often and download them.
144 set keep-all-logs 0
145
146 # If keep-all-logs is 1, this setting will define the suffix of the logfiles.
147 # The default will result in a suffix like "04May2000". "%Y%m%d" will produce
148 # the often used yyyymmdd format. Read the strftime manpages for more options.
149 # NOTE: On systems which don't support strftime, the default format will
150 # be used _always_.
151 set logfile-suffix ".%d%b%Y"
152
153 # You can specify when Eggdrop should switch logfiles and start fresh. You
154 # must use military time for this setting. 300 is the default, and describes
155 # 03:00 (AM).
156 set switch-logfiles-at 300
157
158 # "Writing user file..." and "Writing channel file..." messages won't be
159 # logged anymore if this option is enabled.
160 set quiet-save 0
161
162
163 ##### CONSOLE #####
164
165 # This is the default console mode. It uses the same event flags as the log
166 # files do. The console channel is automatically set to your "primary" channel,
167 # which is set in the modules section of the config file. Masters can change
168 # their console channel and modes with the '.console' command.
169
170 set console "mkcobxs"
171
172
173 ##### FILES AND DIRECTORIES #####
174
175 # Specify here the filename your userfile should be saved as.
176 set userfile "LamestBot.user"
177
178 # Specify here the filename Eggdrop will save its pid to. If no pidfile is
179 # specified, pid.(botnet-nick) will be used.
180 #set pidfile "pid.LamestBot"
181
182 # If you want your userfile to be sorted upon saving, enable this setting.
183 # This causes the bot to use a bit more CPU when saving the userfile.
184 set sort-users 0
185
186 # Specify here where Eggdrop should look for help files. Don't modify this
187 # setting unless you know what you're doing!
188 set help-path "help/"
189
190 # Specify here where Eggdrop should look for text files. This is used for
191 # certain Tcl and DCC commands.
192 set text-path "text/"
193
194 # Set here a place to store temporary files.
195 set temp-path "/tmp"
196
197 # The MOTD (Message Of The day) is displayed when people dcc chat or telnet
198 # to the bot. Look at doc/TEXT-SUBSTITUTIONS for options.
199 set motd "text/motd"
200
201 # This banner will be displayed on telnet connections. Look at
202 # doc/TEXT-SUBSTITUTIONS for options.
203 set telnet-banner "text/banner"
204
205 # This specifies what permissions the user, channel, and notes files should
206 # be set to. The octal values are the same as for the chmod system command.
207 #
208 # To remind you:
209 #
210 # u g o u g o u g o
211 # 0600 rw------- 0400 r-------- 0200 -w------- u - user
212 # 0660 rw-rw---- 0440 r--r----- 0220 -w--w---- g - group
213 # 0666 rw-rw-rw- 0444 r--r--r-- 0222 -w--w--w- o - others
214 #
215 # Note that the default 0600 is the most secure one and should only be changed
216 # if you need your files for shell scripting or other external applications.
217 set userfile-perm 0600
218
219
220 ##### BOTNET/DCC/TELNET #####
221
222 # Settings in this section should be unimportant for you until you deal
223 # with botnets (multiple Eggdrops connected together to maximize efficiency).
224 # You should read doc/BOTNET before modifying these settings.
225
226 # If you want to use a different nickname on the botnet than you use on
227 # IRC (i.e. if you're on an un-trusted botnet), un-comment the next line
228 # and set it to the nick you would like to use.
229 #set botnet-nick "LlamaBot"
230
231 # This opens a telnet port by which you and other bots can interact with the
232 # Eggdrop by telneting in.
233 #
234 # There are more options for the listen command in doc/tcl-commands.doc. Note
235 # that if you are running more than one bot on the same machine, you will want
236 # to space the telnet ports at LEAST 5 apart, although 10 is even better.
237 #
238 # Valid ports are typically anything between 1025 and 65535 assuming the
239 # port is not already in use.
240 #
241 # If you would like the bot to listen for users and bots in separate ports,
242 # use the following format:
243 #
244 # listen 3333 bots
245 # listen 4444 users
246 #
247 # If you wish to use only one port, use this format:
248 #
249 # listen 3333 all
250 #
251 # You need to un-comment this line and change the port number in order to open
252 # the listen port. You should not keep this set to 3333.
253 #listen 3333 all
254
255 # This setting defines whether or not people can boot users on the Eggdrop
256 # from other bots in your botnet. Valid settings are:
257 # 0 - allow *no* outside boots
258 # 1 - allow boots from sharebots
259 # 2 - allow any boots
260 set remote-boots 2
261
262 # This setting prohibits remote bots from telling your Eggdrop to unlink from
263 # share bots.
264 set share-unlinks 1
265
266 # This setting will drop telnet connections not matching a known host.
267 set protect-telnet 0
268
269 # This setting will make the bot ignore DCC chat requests which appear to
270 # have bogus information on the grounds that the user may have been trying
271 # to make the bot connect to somewhere that will get it into trouble, or
272 # that the user has a broken client, in which case the connect wouldn't work
273 # anyway.
274 set dcc-sanitycheck 0
275
276 # This settings defines a time in seconds that the bot should wait before
277 # a dcc chat, telnet, or relay connection times out.
278 set ident-timeout 5
279
280 # Define here whether or not a +o user still needs the +p flag to dcc the bot.
281 set require-p 0
282
283 # If you want people allow to telnet in and type 'NEW' to become a new user,
284 # set this to 1. This is similar to the 'hello' msg command. The protect-telnet
285 # setting must be set to 0 to use this.
286 set open-telnets 0
287
288 # If you don't want Eggdrop to identify itself as an eggdrop on a telnet
289 # connection, set this setting to 1. Eggdrop will display 'Nickname' instead.
290 set stealth-telnets 0
291
292 # If you want Eggdrop to display a banner when telneting in, set this setting
293 # to 1. The telnet banner is set by 'set telnet-banner'.
294 set use-telnet-banner 0
295
296 # This settings defines a time in seconds that the bot should wait before
297 # a dcc chat, telnet, or relay connection times out.
298 set connect-timeout 15
299
300 # Specify here the number of lines to accept from a user on the partyline
301 # within 1 second before they are considered to be flooding and therefore
302 # get booted.
303 set dcc-flood-thr 3
304
305 # Define here how many telnet connection attempts in how many seconds from
306 # the same host constitute a flood. The correct format is Attempts:Seconds.
307 set telnet-flood 5:60
308
309 # If you want telnet-flood to apply even to +f users, set this setting to 1.
310 set paranoid-telnet-flood 1
311
312 # Set here the amount of seconds before giving up on hostname/address
313 # lookup (you might want to increase this if you are on a slow network).
314 set resolve-timeout 15
315
316
317 ##### MORE ADVANCED SETTINGS #####
318
319 # Set this to your socks host if your Eggdrop sits behind a firewall. If
320 # you use a Sun "telnet passthru" firewall, prefix the host with a '!'.
321 #set firewall "!sun-barr.ebay:3666"
322
323 # If you have a NAT firewall (you box has an IP in one of the following
324 # ranges: 192.168.0.0-192.168.255.255, 172.16.0.0-172.31.255.255,
325 # 10.0.0.0-10.255.255.255 and your firewall transparently changes your
326 # address to a unique address for your box) or you have IP masquerading
327 # between you and the rest of the world, and /dcc chat, /ctcp chat or
328 # userfile sharing aren't working, enter your outside IP here. This IP
329 # is used for transfers only, and has nothing to do with the my-ip or
330 # my-hostname settings. You may still need to set my-ip and/or my-hostname.
331 #set nat-ip "127.0.0.1"
332
333 # If you want all dcc file transfers to use a particular portrange either
334 # because you're behind a firewall, or for other security reasons, set it
335 # here.
336 #set reserved-portrange 2010:2020
337
338 # Set the time in minutes that temporary ignores should last.
339 set ignore-time 15
340
341 # Define here what Eggdrop considers 'hourly'. All calls to it, including such
342 # things as note notifying or userfile saving, are affected by this.
343 # For example:
344 #
345 # set hourly-updates 15
346 #
347 # The bot will save its userfile 15 minutes past every hour.
348 set hourly-updates 00
349
350 # Un-comment the next line and set the list of owners of the bot.
351 # You NEED to change this setting.
352 #set owner "MrLame, MrsLame"
353
354 # Who should a note be sent to when new users are learned?
355 set notify-newusers "$owner"
356
357 # Enter the flags that all new users should get by default. See '.help whois'
358 # on the partyline for a list of flags and their descriptions.
359 set default-flags "hp"
360
361 # Enter all user-defined fields that should be displayed in a '.whois'.
362 # This will only be shown if the user has one of these extra fields.
363 # You might prefer to comment this out and use the userinfo1.0.tcl script
364 # which provides commands for changing all of these.
365 set whois-fields "url birthday"
366
367 # Enable this setting if you want your Eggdrop to die upon receiving a SIGHUP
368 # kill signal. Otherwise, the Eggdrop will just save its userfile and rehash.
369 set die-on-sighup 0
370
371 # Enable this setting if you want your Eggdrop to die upon receiving a SIGTERM
372 # kill signal. Otherwise, the Eggdrop will just save its userfile and rehash.
373 set die-on-sigterm 1
374
375 # Comment these two lines if you wish to enable the .tcl and .set commands.
376 # If you select your owners wisely, you should be okay enabling these.
377 unbind dcc n tcl *dcc:tcl
378 unbind dcc n set *dcc:set
379
380 # If you enable this setting, only permanent owners (owner setting) will be
381 # able to use .tcl and .set. Moreover, if you want only let permanent owners
382 # use .dump, then set this to 2.
383 set must-be-owner 1
384
385 # Comment out this line to add the 'simul' partyline command (owners can
386 # manipulate other people on the party line). Please select owners wisely
387 # and use this command ethically!
388 unbind dcc n simul *dcc:simul
389
390 # Set here the maximum number of dcc connections you will allow. You can
391 # increase this later, but never decrease it.
392 set max-dcc 50
393
394 # Enable this setting if you want +d & +k users to use commands bound as -|-.
395 set allow-dk-cmds 1
396
397 # If your Eggdrop rejects bots that actually have already disconnected from
398 # another hub, but the disconnect information has not yet spread over the
399 # botnet due to lag, use this setting. The bot will wait dupwait-timeout
400 # seconds before it checks again and then finally reject the bot.
401 set dupwait-timeout 5
402
403 # Enable cidr support for b/e/I modes. This means the bot will understand
404 # and match modes in cidr notation, and will be able to put and enforce such
405 # bans or unban itself, if banned with a cidr mask.
406 # Do NOT set this, if your network/server does not support cidr!
407 set cidr-support 0
408
409 # You MUST remove this line for your bot to start. This has been added to
410 # prevent you from starting up a bot that is not fully configured. Bots
411 # that have not been fully configured may join the wrong IRC network, the
412 # wrong channels, or generally do things that you do not want. Please make
413 # sure that you have double-checked every setting. There's also a similar line
414 # lower down, just to make sure you're reading :)
415 die "Please make sure you edit your config file completely."
416
417
418 ##### MODULES #####
419
420 # Below are various settings for the modules included with Eggdrop.
421 # PLEASE READ AND EDIT THEM CAREFULLY, even if you're an old hand at
422 # Eggdrop, things change.
423
424 # This path specifies the path were Eggdrop should look for its modules.
425 # If you run the bot from the compilation directory, you will want to set
426 # this to "". If you use 'make install' (like all good kiddies do ;), this
427 # is a fine default. Otherwise, use your head :)
428 set mod-path "modules/"
429
430
431 #### BLOWFISH MODULE ####
432
433 # IF YOU DON'T READ THIS YOU MAY RENDER YOUR USERFILE USELESS LATER
434 # Eggdrop encrypts its userfile, so users can have secure passwords.
435 # Please note that when you change your encryption method later (i.e.
436 # using other modules like a md5 module), you can't use your current
437 # userfile anymore. Eggdrop will not start without an encryption module.
438 loadmodule blowfish
439
440
441 #### DNS MODULE ####
442
443 # This module provides asynchronous dns support. This will avoid long
444 # periods where the bot just hangs there, waiting for a hostname to
445 # resolve, which will often let it timeout on all other connections.
446 loadmodule dns
447
448
449 #### CHANNELS MODULE ####
450
451 # This module provides channel related support for the bot. Without it,
452 # you won't be able to make the bot join a channel or save channel
453 # specific userfile information.
454 loadmodule channels
455
456 # Enter here the filename where dynamic channel settings are stored.
457 set chanfile "LamestBot.chan"
458
459 # Set this setting to 1 if you want your bot to expire bans/exempts/invites set
460 # by other opped bots on the channel.
461 set force-expire 0
462
463 # Set this setting to 1 if you want your bot to share user greets with other
464 # bots on the channel if sharing user data.
465 set share-greet 0
466
467 # Set this setting to 1 if you want to allow users to store an info line.
468 set use-info 1
469
470 # Set this setting to 1 if you want to allow both +p and +s channel modes
471 # to be enforced at the same time by the chanmode channel setting.
472 # Make sure your server supports +ps mixing or you may get endless mode
473 # floods.
474 set allow-ps 0
475
476 # The following settings are used as default values when you .+chan #chan or .tcl
477 # channel add #chan. Look in the section below for explanation of every option.
478
479 set global-flood-chan 10:60
480 set global-flood-deop 3:10
481 set global-flood-kick 3:10
482 set global-flood-join 5:60
483 set global-flood-ctcp 3:60
484 set global-flood-nick 5:60
485 set global-aop-delay 5:30
486 set global-idle-kick 0
487 set global-chanmode "nt"
488 set global-stopnethack-mode 0
489 set global-revenge-mode 0
490 set global-ban-type 3
491 set global-ban-time 120
492 set global-exempt-time 60
493 set global-invite-time 60
494
495 set global-chanset {
496 -autoop -autovoice
497 -bitch +cycle
498 +dontkickops +dynamicbans
499 +dynamicexempts +dynamicinvites
500 -enforcebans +greet
501 -inactive -nodesynch
502 -protectfriends +protectops
503 -revenge -revengebot
504 -secret -seen
505 +shared +statuslog
506 +userbans +userexempts
507 +userinvites -protecthalfops
508 -autohalfop
509 }
510
511 # Add each static channel you want your bot to sit in using the following
512 # command. There are many different possible settings you can insert into
513 # this command, which are explained below.
514 #
515 # channel add #lamest {
516 # chanmode "+nt-likm"
517 # idle-kick 0
518 # stopnethack-mode 0
519 # revenge-mode 0
520 # ban-time 120
521 # exempt-time 60
522 # invite-time 60
523 # aop-delay 5:30
524 # need-op { putserv "PRIVMSG #lamest :op me cos i'm lame!" }
525 # need-invite { putserv "PRIVMSG #lamest :let me in!" }
526 # need-key { putserv "PRIVMSG #lamest :let me in!" }
527 # need-unban { putserv "PRIVMSG #lamest :let me in!" }
528 # need-limit { putserv "PRIVMSG #lamest :let me in!" }
529 # flood-chan 10:60
530 # flood-deop 3:10
531 # flood-kick 3:10
532 # flood-join 5:60
533 # flood-ctcp 3:60
534 # flood-nick 5:60
535 # }
536 #
537 # chanmode +/-<modes>
538 # This setting makes the bot enforce channel modes. It will always add
539 # the +<modes> and remove the -<modes> modes.
540 #
541 # idle-kick 0
542 # This setting will make the bot check every minute for idle
543 # users. Set this to 0 to disable idle check.
544 #
545 # stopnethack-mode 0
546 # This setting will make the bot de-op anyone who enters the channel
547 # with serverops. There are seven different modes for this settings:
548 # 0 turn off
549 # 1 isoptest (allow serverop if registered op)
550 # 2 wasoptest (allow serverop if op before split)
551 # 3 allow serverop if isop or wasop
552 # 4 allow serverop if isop and wasop.
553 # 5 If the channel is -bitch, see stopnethack-mode 3
554 # If the channel is +bitch, see stopnethack-mode 1
555 # 6 If the channel is -bitch, see stopnethack-mode 2
556 # If the channel is +bitch, see stopnethack-mode 4
557 #
558 # revenge-mode 0
559 # This settings defines how the bot should punish bad users when
560 # revenging. There are four possible settings:
561 # 0 Deop the user.
562 # 1 Deop the user and give them the +d flag for the channel.
563 # 2 Deop the user, give them the +d flag for the channel, and kick them.
564 # 3 Deop the user, give them the +d flag for the channel, kick, and ban them.
565 #
566 # ban-type 3
567 # This setting defines what type of bans should eggdrop place for +k users or
568 # when revenge-mode is 3.
569 # Available types are:
570 # 0 *!user@host
571 # 1 *!*user@host
572 # 2 *!*@host
573 # 3 *!*user@*.host
574 # 4 *!*@*.host
575 # 5 nick!user@host
576 # 6 nick!*user@host
577 # 7 nick!*@host
578 # 8 nick!*user@*.host
579 # 9 nick!*@*.host
580 # You can also specify types from 10 to 19 which correspond to types
581 # 0 to 9, but instead of using a * wildcard to replace portions of the
582 # host, only numbers in hostnames are replaced with the '?' wildcard.
583 # Same is valid for types 20-29, but instead of '?', the '*' wildcard
584 # will be used.
585 #
586 # ban-time 120
587 # Set here how long temporary bans will last (in minutes). If you
588 # set this setting to 0, the bot will never remove them.
589 #
590 # exempt-time 60
591 # Set here how long temporary exempts will last (in minutes). If you
592 # set this setting to 0, the bot will never remove them. The bot will
593 # check the exempts every X minutes, but will not remove the exempt if
594 # a ban is set on the channel that matches that exempt. Once the ban is
595 # removed, then the exempt will be removed the next time the bot checks.
596 # Please note that this is an IRCnet feature.
597 #
598 # invite-time 60
599 # Set here how long temporary invites will last (in minutes). If you
600 # set this setting to 0, the bot will never remove them. The bot will
601 # check the invites every X minutes, but will not remove the invite if
602 # a channel is set to +i. Once the channel is -i then the invite will be
603 # removed the next time the bot checks. Please note that this is an IRCnet
604 # feature.
605 #
606 # aop-delay (minimum:maximum)
607 # This is used for autoop, autohalfop, autovoice. If an op or voice joins a
608 # channel while another op or voice is pending, the bot will attempt to put
609 # both modes on one line.
610 # aop-delay 0 No delay is used.
611 # aop-delay X An X second delay is used.
612 # aop-delay X:Y A random delay between X and Y is used.
613 #
614 # need-op { putserv "PRIVMSG #lamest :op me cos i'm lame!" }
615 # This setting will make the bot run the script enclosed in brackets
616 # if it does not have ops. This must be shorter than 120 characters.
617 # If you use scripts like getops.tcl or botnetop.tcl, you don't need
618 # to set this setting.
619 #
620 # need-invite { putserv "PRIVMSG #lamest :let me in!" }
621 # This setting will make the bot run the script enclosed in brackets
622 # if it needs an invite to the channel. This must be shorter than 120
623 # characters. If you use scripts like getops.tcl or botnetop.tcl, you
624 # don't need to set this setting.
625 #
626 # need-key { putserv "PRIVMSG #lamest :let me in!" }
627 # This setting will make the bot run the script enclosed in brackets
628 # if it needs the key to the channel. This must be shorter than 120
629 # characters. If you use scripts like getops.tcl or botnetop.tcl, you
630 # don't need to set this setting
631 #
632 # need-unban { putserv "PRIVMSG #lamest :let me in!" }
633 # This setting will make the bot run the script enclosed in brackets
634 # if it needs to be unbanned on the channel. This must be shorter than
635 # 120 characters. If you use scripts like getops.tcl or botnetop.tcl,
636 # you don't need to set this setting
637 #
638 # need-limit { putserv "PRIVMSG #lamest :let me in!" }
639 # This setting will make the bot run the script enclosed in brackets
640 # if it needs the limit to be raised on the channel. This must be
641 # shorter than 120 characters. If you use scripts like getops.tcl or
642 # botnetop.tcl, you don't need to set this setting
643 #
644 # flood-chan 10:60
645 # Set here how many channel messages in how many seconds from one
646 # host constitutes a flood. Setting this to 0 or 0:0 disables
647 # flood protection for the channel.
648 #
649 # flood-deop 3:10
650 # Set here how many deops in how many seconds from one host constitutes
651 # a flood. Setting this to 0 or 0:0 disables deop flood protection for
652 # the channel.
653 #
654 # flood-kick 3:10
655 # Set here how many kicks in how many seconds from one host constitutes
656 # a flood. Setting this to 0 or 0:0 disables kick flood protection for
657 # the channel.
658 #
659 # flood-join 5:60
660 # Set here how many joins in how many seconds from one host constitutes
661 # a flood. Setting this to 0 or 0:0 disables join flood protection for
662 # the channel.
663 #
664 # flood-ctcp 3:60
665 # Set here how many channel ctcps in how many seconds from one host
666 # constitutes a flood. Setting this to 0 or 0:0 disables ctcp flood
667 # protection for the channel.
668 #
669 # flood-nick 5:60
670 # Set here how many nick changes in how many seconds from one host
671 # constitutes a flood. Setting this to 0 or 0:0 disables nick flood
672 # protection for the channel.
673 #
674 # There are many different options for channels which you can
675 # define. They can be enabled or disabled using the channel set command by a
676 # plus or minus in front of them.
677 #
678 # channel set #lamest +enforcebans +dynamicbans +userbans +dynamicexempts
679 # channel set #lamest +userexempts +dynamicinvites +userinvites +protectops
680 # channel set #lamest +protectfriends +statuslog +revenge -protecthalfops
681 # channel set #lamest +revengebot +dontkickops +autovoice -autoop -autohalfop
682 # channel set #lamest -bitch -secret -shared +greet +cycle
683 #
684 # A complete list of all available channel settings:
685 #
686 # enforcebans
687 # When a ban is set, kick people who are on the channel and match
688 # the ban?
689 #
690 # dynamicbans
691 # Only activate bans on the channel when necessary? This keeps
692 # the channel's ban list from getting excessively long. The bot
693 # still remembers every ban, but it only activates a ban on the
694 # channel when it sees someone join who matches that ban.
695 #
696 # userbans
697 # Allow bans to be made by users directly? If turned off, the bot
698 # will require all bans to be made through the bot's console.
699 #
700 # dynamicexempts
701 # Only activate exempts on the channel when necessary? This keeps
702 # the channel's exempt list from getting excessively long. The bot
703 # still remembers every exempt, but it only activates a exempt on
704 # the channel when it sees a ban set that matches the exempt. The
705 # exempt remains active on the channel for as long as the ban is
706 # still active.
707 #
708 # userexempts
709 # Allow exempts to be made by users directly? If turned off, the
710 # bot will require all exempts to be made through the bot's console.
711 #
712 # dynamicinvites
713 # Only activate invites on the channel when necessary? This keeps
714 # the channel's invite list from getting excessively long. The bot
715 # still remembers every invite, but the invites are only activated
716 # when the channel is set to invite only and a user joins after
717 # requesting an invite. Once set, the invite remains until the
718 # channel goes to -i.
719 #
720 # userinvites
721 # Allow invites to be made by users directly? If turned off, the
722 # bot will require all invites to be made through the bot's console.
723 #
724 # autoop
725 # Op users with the +o flag as soon as they join the channel?
726 # This is insecure and not recommended.
727 #
728 # autohalfop
729 # Halfop users with the +l flag as soon as they join the channel?
730 # This is insecure and not recommended.
731 #
732 # bitch
733 # Only let users with +o) flag be opped on the channel?
734 #
735 # greet
736 # Say a user's info line when they join the channel?
737 #
738 # protectops
739 # Re-op a user with the +o flag if they get deopped?
740 #
741 # protecthalfops
742 # Re-halfop a user with the +l flag if they get dehalfopped?
743 #
744 # protectfriends
745 # Re-op a user with the +f flag if they get deopped?
746 #
747 # statuslog
748 # Log the channel status line every 5 minutes? This shows the bot's
749 # status on the channel (op, voice, etc.), the channel's modes, and
750 # the number of +m/+o/+v/+n/+b/+e/+I users on the channel. A sample
751 # status line follows:
752 #
753 # [01:40] @#lamest (+istn) : [m/1 o/1 v/4 n/7 b/1 e/5 I/7]
754 #
755 # revenge
756 # Remember people who deop/kick/ban the bot, valid ops, or friends
757 # and punish them? Users with the +f flag are exempt from revenge.
758 #
759 # revengebot
760 # This is similar to to the 'revenge' option, but it only triggers
761 # if a bot gets deopped, kicked or banned.
762 #
763 # autovoice
764 # Voice users with the +v flag when they join the channel?
765 #
766 # secret
767 # Prevent this channel from being listed on the botnet?
768 #
769 # shared
770 # Share channel-related user info for this channel?
771 #
772 # cycle
773 # Cycle the channel when it has no ops?
774 #
775 # dontkickops
776 # Do you want the bot not to be able to kick users who have the +o
777 # flag, letting them kick-flood for instance to protect the channel
778 # against clone attacks.
779 #
780 # inactive
781 # This prevents the bot from joining the channel (or makes it leave
782 # the channel if it is already there). It can be useful to make the
783 # bot leave a channel without losing its settings, channel-specific
784 # user flags, channel bans, and without affecting sharing.
785 #
786 # seen
787 # Respond to seen requests in the channel? The seen module must be
788 # loaded for this to work.
789 #
790 # nodesynch
791 # Allow non-ops to perform channel modes? This can stop the bot from
792 # fighting with services such as ChanServ, or from kicking IRCops when
793 # setting channel modes without having ops.
794 #
795 # Here is a shorter example:
796 #
797 # channel add #botcentral {
798 # chanmode "+mntisl 1"
799 # idle-kick 1
800 # }
801 # channel set #botcentral +bitch +enforcebans -greet +revenge
802
803
804 #### SERVER MODULE ####
805
806 # This module provides the core server support. You have to load this
807 # if you want your bot to come on IRC. Not loading this is equivalent
808 # to the old NO_IRC define.
809 loadmodule server
810
811 # What is your network?
812 # 0 = EFnet
813 # 1 = IRCnet
814 # 2 = Undernet
815 # 3 = DALnet
816 # 4 = +e/+I/max-modes 20 Hybrid
817 # 5 = Others
818 set net-type 0
819
820 # Set the nick the bot uses on IRC, and on the botnet unless you specify a
821 # separate botnet-nick, here.
822 set nick "Lamestbot"
823
824 # Set the alternative nick which the bot uses on IRC if the nick specified
825 # by 'set nick' is unavailable. All '?' characters will be replaced by random
826 # numbers.
827 set altnick "Llamab?t"
828
829 # Set what should be displayed in the real-name field for the bot on IRC.
830 # This can not be blank, it has to contain something.
831 set realname "/msg LamestBot hello"
832
833 # This is a Tcl script to be run immediately after connecting to a server.
834 bind evnt - init-server evnt:init_server
835
836 proc evnt:init_server {type} {
837 global botnick
838 putquick "MODE $botnick +i-ws"
839 }
840
841 # Set the default port which should be used if none is specified with
842 # '.jump' or in 'set servers'.
843 set default-port 6667
844
845 # This is the bot's server list. The bot will start at the first server listed,
846 # and cycle through them whenever it gets disconnected. You need to change these
847 # servers to YOUR network's servers.
848 #
849 # The format is:
850 # server[:port[:password]]
851 #
852 # Both the port and password fields are optional; however, if you want to set a
853 # password you must also set a port. If a port isn't specified it will default to
854 # your default-port setting.
855 set servers {
856 you.need.to.change.this:6667
857 another.example.com:7000:password
858 }
859
860 # Number of seconds to wait between transmitting queued lines to the server.
861 # Lower this value at your own risk. ircd is known to start flood control
862 # at 512 bytes/2 seconds.
863 set msg-rate 2
864
865 # This setting makes the bot try to get his original nickname back if its
866 # primary nickname is already in use.
867 set keep-nick 1
868
869 # Set this to 0 if you want the bot to strip '~' characters from user@hosts
870 # before matching them.
871 set strict-host 0
872
873 # This setting makes the bot squelch the error message when rejecting a DCC
874 # CHAT, SEND or message command. Normally, Eggdrop notifies the user that the
875 # command has been rejected because they don't have access. Note that sometimes
876 # IRC server operators detect bots that way.
877 set quiet-reject 1
878
879 # If you want your bot to answer lower case ctcp requests (non rfc-
880 # compliant), set this setting to 1. mIRC will do this, most other
881 # clients will not.
882 set lowercase-ctcp 0
883
884 # Set how many ctcps should be answered at once.
885 set answer-ctcp 3
886
887 # Set here how many msgs in how many seconds from one host constitutes
888 # a flood. If you set this to 0:0, msg flood protection will be disabled.
889 set flood-msg 5:60
890
891 # Set here how many ctcps in how many seconds from one host constitutes
892 # a flood. If you set this to 0:0, ctcp flood protection will be disabled.
893 set flood-ctcp 3:60
894
895 # This settings makes the bot cycle forever through the server list until
896 # it successfully connects to one.
897 set never-give-up 1
898
899 # This setting defines how long Eggdrop should wait before moving from one
900 # server to another on disconnect. If you set 0 here, Eggdrop will not wait
901 # at all and will connect instantly. Setting this too low could result in
902 # your bot being K:Lined.
903 set server-cycle-wait 60
904
905 # Set here how long Eggdrop should wait for a response when connecting to a
906 # server before giving up and moving on to next server.
907 set server-timeout 60
908
909 # If the number of servers on the net gets below this number, the bot
910 # will jump to a new server (it will assume it's on the losing end of
911 # a netsplit). Set this to 0 to turn off. If your bot is running on
912 # any major IRC network, this should probably be turned off.
913 set servlimit 0
914
915 # Set this to 1 if Eggdrop should check for stoned servers? (where the
916 # server connection has died, but Eggdrop hasn't been notified yet).
917 set check-stoned 1
918
919 # If you want your bot to exit the server if it receives an ERROR message,
920 # set this to 1.
921 set serverror-quit 1
922
923 # Set here the maximum number of lines to queue to the server. If you're
924 # going to dump large chunks of text to people over IRC, you will probably
925 # want to raise this. 300 is fine for most people though.
926 set max-queue-msg 300
927
928 # If you want Eggdrop to trigger binds for ignored users, set this to 1.
929 set trigger-on-ignore 0
930
931 # This setting configures PUBM and MSGM binds to be exclusive of PUB and MSG
932 # binds. This means if a MSGM bind with the mask "*help*" exists and is
933 # triggered, any MSG bindings with "help" in their mask will not be
934 # triggered. Don't enable this unless you know what you are doing!
935 set exclusive-binds 0
936
937 # Allow identical messages in the mode queue?
938 set double-mode 1
939
940 # Allow identical messages in the server queue?
941 set double-server 1
942
943 # Allow identical messages in the help queue?
944 set double-help 1
945
946 # This optimizes the kick queue. It also traces nick changes and parts in
947 # the channel and changes the kick queue accordingly. There are three
948 # different options for this setting:
949 # 0 = Turn it off.
950 # 1 = Optimize the kick queue by summarizing kicks.
951 # 2 = Trace nick changes and parts on the channel and change the queue
952 # accordingly. For example, bot will not try to kick users who have
953 # already parted the channel.
954 # ATTENTION: Setting 2 is very CPU intensive.
955 set optimize-kicks 1
956
957 # If your network supports more recipients per command then 1, you can
958 # change this behavior here. Set this to the number of recipients per
959 # command, or set this to 0 for unlimited.
960 set stack-limit 4
961
962 ### SERVER MODULE - OTHER NETWORKS (net-type 5) ###
963
964 # This settings defines how umode +r is understood by Eggdrop. Some networks
965 # use +r to indicate a restricted connection. If this is your case, and you
966 # want your bot to leave restricted servers and jump to the next server on its
967 # list, then set it to 1.
968 #set check-mode-r 1
969
970 # This setting allows you to specify the maximum nick-length supported by your
971 # network. The default setting is 9. The maximum supported length by Eggdrop
972 # is 32.
973 #set nick-len 9
974
975 #### CTCP MODULE ####
976
977 # This module provides the normal ctcp replies that you'd expect.
978 # Without it loaded, CTCP CHAT will not work. The server module
979 # is required for this module to function.
980 loadmodule ctcp
981
982 # Set here how the ctcp module should answer ctcps. There are 3 possible
983 # operating modes:
984 # 0: Normal behavior is used.
985 # 1: The bot ignores all ctcps, except for CHAT and PING requests
986 # by users with the +o flag.
987 # 2: Normal behavior is used, however the bot will not answer more
988 # than X ctcps in Y seconds (defined by 'set flood-ctcp').
989 set ctcp-mode 0
990
991 # There are also several variables to help make your bot less noticeable.
992 # They are: ctcp-version, ctcp-finger, and ctcp-userinfo. You can use set to set
993 # them to values you'd like.
994
995
996 #### IRC MODULE ####
997
998 # This module provides basic IRC support for your bot. You have to
999 # load this if you want your bot to come on IRC. The server and channels
1000 # modules must be loaded for this module to function.
1001 loadmodule irc
1002
1003 # Set this to 1 if you want to bounce all server bans.
1004 set bounce-bans 1
1005
1006 # Set this to 1 if you want to bounce all server exemptions (+e modes).
1007 # This is disabled if use-exempts is disabled.
1008 set bounce-exempts 0
1009
1010 # Set this to 1 if you want to bounce all server invitations (+I modes).
1011 # This is disabled if use-invites is disabled.
1012 set bounce-invites 0
1013
1014 # Set this to 1 if you want to bounce all server modes.
1015 set bounce-modes 0
1016
1017 # Set here the maximum number of bans you want the bot to set on a channel.
1018 # Eggdrop will not place any more bans if this limit is reached. Undernet
1019 # currently allows 45 bans, IRCnet allows 30, EFnet allows 100, and DALnet
1020 # allows 100.
1021 set max-bans 30
1022
1023 # Set here the maximum number of exempts you want Eggdrop to set on a channel.
1024 # Eggdrop will not place any more exempts if this limit is reached.
1025 set max-exempts 20
1026
1027 # Set here the maximum number of invites you want Eggdrop to set on a channel.
1028 # Eggdrop will not place any more invites if this limit is reached.
1029 set max-invites 20
1030
1031 # There is a global limit for +b/+e/+I modes. This limit should be set to
1032 # the same value as max-bans for networks that do not support +e/+I.
1033 set max-modes 30
1034
1035 # The following settings should be left commented unless the default values
1036 # are being overridden. By default, exempts and invites are on for EFnet and
1037 # IRCnet, but off for all other large networks. This behavior can be modified
1038 # with the following 2 flags. If your network doesn't support +e/+I modes then
1039 # you will be unable to use these features.
1040 #
1041 # Do you want to enable exempts (+e modes)?
1042 #set use-exempts 0
1043
1044 # Do you want to enable invites (+I modes)?
1045 #set use-invites 0
1046
1047 # Set this to 1 if you want the bot to kick for control character/ctcp
1048 # avalanches to a channel. Remember that if it does, it won't ban them.
1049 # This can start kick floods.
1050 set kick-fun 0
1051
1052 # Set this to 1 if you want the bot to ban for control character/ctcp
1053 # avalanches to a channel. This can prevent kick floods, but it also can
1054 # fill the banlist.
1055 set ban-fun 0
1056
1057 # If you want people to be able to add themselves to the bot's userlist
1058 # with the default userflags (defined above in the config file) via the
1059 # 'hello' msg command, set this to 1.
1060 set learn-users 0
1061
1062 # Set here the time (in seconds) to wait for someone to return from a netsplit
1063 # (i.e. wasop will expire afterwards). Set this to 1500 on IRCnet since its
1064 # nick delay stops after 30 minutes.
1065 set wait-split 600
1066
1067 # Set here the time (in seconds) that someone must have been off-channel
1068 # before re-displaying their info line.
1069 set wait-info 180
1070
1071 # Set this to the maximum number of bytes to send in the arguments
1072 # of modes sent to the server. Most servers default this to 200.
1073 set mode-buf-length 200
1074
1075 # Many IRCops find bots by seeing if they reply to 'hello' in a msg.
1076 # You can change this to another word by un-commenting the following
1077 # two lines and changing "myword" to the word wish to use instead of
1078 # 'hello'. It must be a single word.
1079 #unbind msg - hello *msg:hello
1080 #bind msg - myword *msg:hello
1081
1082 # Many takeover attempts occur due to lame users blindly /msg ident'ing to
1083 # the bot and attempting to guess passwords. We now unbind this command by
1084 # default to discourage them. You can enable these commands by commenting the
1085 # following two lines.
1086 unbind msg - ident *msg:ident
1087 unbind msg - addhost *msg:addhost
1088
1089 # Some IRC servers are using some non-standard op-like channel prefixes/modes.
1090 # Define them here so the bot can recognize them. Just "@" should be fine for
1091 # most networks. Un-comment the second line for some UnrealIRCds.
1092
1093 set opchars "@"
1094 #set opchars "@&~"
1095
1096 # If you are so lame you want the bot to display peoples info lines, even
1097 # when you are too lazy to add their chanrecs to a channel, set this to 1.
1098 # *NOTE* This means *every* user with an info line will have their info
1099 # line displayed on EVERY channel they join (provided they have been gone
1100 # longer than wait-info).
1101 set no-chanrec-info 0
1102
1103 ### IRC MODULE - IRCnet SPECIFIC FEATURES (net-type 1) ###
1104
1105 # Attention: Use these settings *only* if you set 'net-type' to 1!
1106
1107 # At the moment, the current IRCnet IRCd version (2.10) doesn't support the
1108 # mixing of b, o and v modes with e and I modes. This might be changed in the
1109 # future, so use 1 at the moment for this setting.
1110 set prevent-mixing 1
1111
1112 ### IRC MODULE - OTHER NETWORKS (net-type 5) ###
1113
1114 # Attention: Use these settings *only* if you set 'net-type' to 5!
1115
1116 # If your network supports more users per kick command then 1, you can
1117 # change this behavior here. Set this to the number of users to kick at
1118 # once, or set this to 0 for all at once.
1119 #set kick-method 1
1120
1121 # Some networks allow you to stack lots of channel modes into one line.
1122 # They're all guaranteed to support at least 3, so that's the default.
1123 # If you know your network supports more, you may want to adjust this.
1124 # This setting is limited to 6, although if you want to use a higher value,
1125 # you can modify this by changing the value of MODES_PER_LINE_MAX in
1126 # src/chan.h and recompiling the bot.
1127 #set modes-per-line 3
1128
1129 # Some networks don't include the +l limit and +k or -k key modes
1130 # in the modes-per-line (see above) limitation. Set include-lk to 0 for
1131 # these networks.
1132 #set include-lk 1
1133
1134 # Set this to 1 if your network uses IRCu2.10.01 specific /who requests.
1135 # Eggdrop can, therefore, ask only for exactly what's needed.
1136 #set use-354 0
1137
1138 # If your network doesn't use rfc 1459 compliant string matching routines,
1139 # set this to 0.
1140 #set rfc-compliant 1
1141
1142
1143 #### TRANSFER MODULE ####
1144
1145 # The transfer module provides DCC SEND/GET support and userfile transfer
1146 # support for userfile sharing. Un-comment the next line to load it if you
1147 # need this functionality.
1148 #loadmodule transfer
1149
1150 # Set here the maximum number of simultaneous downloads to allow for
1151 # each user.
1152 set max-dloads 3
1153
1154 # Set here the block size for dcc transfers. ircII uses 512 bytes,
1155 # but admits that it may be too small. 1024 is standard these days.
1156 # 0 is turbo-dcc (recommended).
1157 set dcc-block 0
1158
1159 # Enable this setting if you want to copy files into the /tmp directory
1160 # before sending them. This is useful on most systems for file stability,
1161 # but if your directories are NFS mounted, it's a pain, and you'll want
1162 # to set this to 0. If you are low on disk space, you may also want to
1163 # set this to 0.
1164 set copy-to-tmp 1
1165
1166 # Set here the time (in seconds) to wait before an inactive transfer times out.
1167 set xfer-timeout 30
1168
1169
1170 #### SHARE MODULE ####
1171
1172 # This module provides userfile sharing support between two directly
1173 # linked bots. The transfer and channels modules are required for this
1174 # module to correctly function. Un-comment the following line to load
1175 # the share module.
1176 #loadmodule share
1177
1178 # Settings in this section must be un-commented before setting.
1179
1180 # When two bots get disconnected, this setting allows them to create a
1181 # resync buffer which saves all changes done to the userfile during
1182 # the disconnect. When they reconnect, they will not have to transfer
1183 # the complete user file, but, instead, just send the resync buffer.
1184 #
1185 # NOTE: This has been known to cause loss of channel flags and other
1186 # problems. Using this setting is not recommended.
1187 #set allow-resync 0
1188
1189 # This setting specifies how long to hold another bots resync data
1190 # before flushing it.
1191 #set resync-time 900
1192
1193 # When sharing user lists, DON'T ACCEPT global flag changes from other bots?
1194 # NOTE: The bot will still send changes made on the bot, it just won't accept
1195 # any global flag changes from other bots. This overrides the private-globals
1196 # setting (below).
1197 #set private-global 0
1198
1199 # When sharing user lists, if private-global isn't set, which global flag
1200 # changes from other bots should be ignored?
1201 #set private-globals "mnot"
1202
1203 # When sharing user lists, don't accept ANY userfile changes from other
1204 # bots? Paranoid people should use this feature on their hub bot. This
1205 # will force all userlist changes to be made via the hub.
1206 #set private-user 0
1207
1208 # This setting makes the bot discard its own bot records in favor of
1209 # the ones sent by the hub.
1210 # NOTE: No passwords or botflags are shared, only ports and
1211 # address are added to sharing procedure. This only works with hubs that
1212 # are v1.5.1 or higher.
1213 #set override-bots 0
1214
1215
1216 #### COMPRESS MODULE ####
1217
1218 # This module provides provides support for file compression. This allows the
1219 # bot to transfer compressed user files and therefore save a significant amount
1220 # of bandwidth. The share module must be loaded to load this module. Un-comment
1221 # the following line to the compress module.
1222 #loadmodule compress
1223
1224 # Allow compressed sending of user files? The user files are compressed with
1225 # the compression level defined in `compress-level'.
1226 set share-compressed 1
1227
1228 # This is the default compression level used. These levels are the same as
1229 # those used by GNU gzip.
1230 #set compress-level 9
1231
1232
1233 #### FILESYSTEM MODULE ####
1234
1235 # This module provides an area within the bot where users can store and
1236 # manage files. With this module, the bot is usable as a file server. The
1237 # transfer module is required for this module to function. Un-comment
1238 # the following line to load the filesys module.
1239 #loadmodule filesys
1240
1241 # Set here the 'root' directory for the file system.
1242 set files-path "/home/mydir/filesys"
1243
1244 # If you want to allow uploads, set this to the directory uploads
1245 # should be put into. Set this to "" if you don't want people to
1246 # upload files to your bot.
1247 set incoming-path "/home/mydir/filesys/incoming"
1248
1249 # If you don't want to have a central incoming directory, but instead
1250 # want uploads to go to the current directory that a user is in, set
1251 # this setting to 1.
1252 set upload-to-pwd 0
1253
1254 # Eggdrop creates a '.filedb' file in each subdirectory of your file area
1255 # to keep track of its own file system information. If you can't do that (for
1256 # example, if the dcc path isn't owned by you, or you just don't want it to do
1257 # that) specify a path here where you'd like all of the database files to be
1258 # stored instead.
1259 set filedb-path ""
1260
1261 # Set here the maximum number of people that can be in the file area at once.
1262 # Setting this to 0 makes it effectively infinite.
1263 set max-file-users 20
1264
1265 # Set here the maximum allowable file size that will be received (in KB).
1266 # Setting this to 0 makes it effectively infinite.
1267 set max-filesize 1024
1268
1269
1270 #### NOTES MODULE ####
1271
1272 # This module provides support for storing of notes for users from each other.
1273 # Note sending between currently online users is supported in the core, this is
1274 # only for storing the notes for later retrieval.
1275 loadmodule notes
1276
1277 # Set here the filename where private notes between users are stored.
1278 set notefile "LamestBot.notes"
1279
1280 # Set here the maximum number of notes to allow to be stored for each user
1281 # (to prevent flooding).
1282 set max-notes 50
1283
1284 # Set here how long (in days) to store notes before expiring them.
1285 set note-life 60
1286
1287 # Set this to 1 if you want to allow users to specify a forwarding address
1288 # for forwarding notes to another account on another bot.
1289 set allow-fwd 0
1290
1291 # Set this to 1 if you want the bot to let people know hourly if they have
1292 # any notes.
1293 set notify-users 1
1294
1295 # Set this to 1 if you want the bot to let people know on join if they have
1296 # any notes.
1297 set notify-onjoin 1
1298
1299 # Comment out this next line. Otherwise, your bot won't start.
1300 die "You didn't edit your config file completely like you were told, did you?"
1301
1302
1303 #### CONSOLE MODULE ####
1304
1305 # This module provides storage of console settings when you exit the
1306 # bot or type .store on the partyline.
1307 loadmodule console
1308
1309 # Save users console settings automatically? Otherwise, they have
1310 # to use the .store command.
1311 set console-autosave 1
1312
1313 # If a user doesn't have any console settings saved, which channel
1314 # do you want them automatically put on?
1315 set force-channel 0
1316
1317 # Enable this setting if a user's global info line should be displayed
1318 # when they join a botnet channel.
1319 set info-party 0
1320
1321
1322 #### WOOBIE MODULE ####
1323
1324 # This is for demonstrative purposes only. If you are looking for starting
1325 # point in writing modules, woobie is the right thing.
1326 #loadmodule woobie
1327
1328
1329 #### SEEN MODULE ####
1330
1331 # This module provides very basic seen commands via msg, on channel or via dcc.
1332 # This module works only for users in the bot's userlist. If you are looking for
1333 # a better and more advanced seen module, try the gseen module by G'Quann. You
1334 # can find it at http://www.visions-of-fantasy.de/gseen.mod/.
1335 #loadmodule seen
1336
1337
1338 #### ASSOC MODULE ####
1339
1340 # This module provides assoc support, i.e. naming channels on the botnet.
1341 # You can load it by un-commenting the following line.
1342 #loadmodule assoc
1343
1344
1345 #### WIRE MODULE ####
1346
1347 # This module provides all the standard .wire commands via dcc. It is an
1348 # encrypted partyline communication tool, compatible with wire.tcl. An
1349 # encryption module must be loaded to use this module. Un-comment the
1350 # following line to load the wire module.
1351 #loadmodule wire
1352
1353 #### UPTIME MODULE ####
1354
1355 # This module reports uptime statistics to http://uptime.eggheads.org.
1356 # Go look and see what your uptime is! It takes about 9 hours to show up,
1357 # so if your bot isn't listed, try again later. The server module must be
1358 # loaded for this module to function.
1359 #
1360 # Information sent to the server includes the bot's uptime, botnet-nick,
1361 # server, version, and IP address. This information is stored in a temporary
1362 # logfile for debugging purposes only. The only publicly available information
1363 # will be the bot's botnet-nick, version and uptime. If you do not wish for this
1364 # information to be sent, comment out the following line.
1365 loadmodule uptime
1366
1367 ##### SCRIPTS #####
1368
1369 # This is a good place to load scripts to use with your bot.
1370
1371 # This line loads script.tcl from the scripts directory inside your Eggdrop's
1372 # directory. All scripts should be put there, although you can place them where
1373 # you like as long as you can supply a fully qualified path to them.
1374 #
1375 # source scripts/script.tcl
1376
1377 source scripts/alltools.tcl
1378 source scripts/action.fix.tcl
1379
1380 # This script enhances Eggdrop's built-in dcc '.whois' command to allow all
1381 # users to '.whois' their own handle.
1382 source scripts/dccwhois.tcl
1383
1384 # This script provides many useful informational functions, like setting
1385 # users' URLs, e-mail address, ICQ numbers, etc. You can modify it to add
1386 # extra entries.
1387 source scripts/userinfo.tcl
1388 loadhelp userinfo.help
1389
1390 # Use this script for Tcl and Eggdrop backwards compatibility.
1391 # NOTE: This can also cause problems with some newer scripts.
1392 #source scripts/compat.tcl
1393
1394 # A few IRC networks (EFnet and Undernet) have added some simple checks to
1395 # prevent drones from connecting to the IRC network. While these checks are
1396 # fairly trivial, they will prevent your Eggdrop from automatically
1397 # connecting. In an effort to work-around these, we have developed a couple of
1398 # TCL scripts to automate the process.
1399
1400 if {[info exists net-type]} {
1401 switch -- ${net-type} {
1402 "0" {
1403 # EFnet
1404 source scripts/quotepong.tcl
1405 }
1406 "2" {
1407 # Undernet
1408 source scripts/quotepass.tcl
1409 }
1410 }
1411 }

webmaster@eggheads.org
ViewVC Help
Powered by ViewVC 1.1.23