/[cvs]/eggdrop1.6/eggdrop.conf
ViewVC logotype

Contents of /eggdrop1.6/eggdrop.conf

Parent Directory Parent Directory | Revision Log Revision Log | View Revision Graph Revision Graph


Revision 1.5 - (show annotations) (download)
Sat Nov 2 00:23:21 2002 UTC (16 years, 7 months ago) by wcc
Branch: MAIN
Changes since 1.4: +1 -6 lines
Reverted encoding patch for now as it seems to be causing quite a few problems.

1 #! /path/to/executable/eggdrop
2 # ^- This should contain a fully qualified path to your Eggdrop executable.
3 #
4 # $Id: eggdrop.conf,v 1.4 2002/10/23 04:06:22 wcc Exp $
5 #
6 # This is a sample Eggdrop configuration file which includes all possible
7 # settings that can be used to configure your bot.
8 #
9 # More detailed descriptions of all these settings can be found in
10 # doc/settings/.
11
12
13 ##### BASIC SETTINGS #####
14
15 # This setting defines the username the bot uses on IRC. This setting has
16 # no effect if an ident daemon is running on your bot's machine.
17 set username "lamest"
18
19 # This setting defines which contact person should be shown in .status,
20 # /msg help, and other places. You really should include this information.
21 set admin "Lamer <email: lamer@lamest.lame.org>"
22
23 # This setting is used only for info to share with others on your botnet.
24 # Set this to the IRC network your bot is connected to.
25 set network "I.didn't.edit.my.config.file.net"
26
27 # This setting defines the timezone is your bot in. It's used for internal
28 # routines as well as for logfile timestamping and scripting purposes.
29 # The timezone string specifies the name of the timezone and must be three
30 # or more alphabetic characters. For example, Central European Time(UTC+1)
31 # should be "CET".
32 set timezone "EST"
33
34 # The offset setting specifies the time value to be added to the local
35 # time to get Coordinated Universal Time (UTC aka GMT). The offset is
36 # positive if the local timezone is west of the Prime Meridian and
37 # negative if it is east. The value (in hours) must be between -23 and
38 # 23. For example, if the timezone is UTC+1, the offset is -1.
39 set offset "5"
40
41 # If you don't want to use the timezone setting for scripting purposes only,
42 # but instead everywhere possible, un-comment the following line.
43 #set env(TZ) "$timezone $offset"
44
45 # If you're using virtual hosting (your machine has more than 1 IP), you
46 # may want to specify the particular IP to bind to. You can specify either
47 # by hostname or by IP. You may also want to set the hostname here if
48 # Eggdrop has trouble detecting it when it starts up.
49 #set my-hostname "virtual.host.com"
50 #set my-ip "99.99.0.0"
51
52 # If you want to have your Eggdrop messages displayed in a language other
53 # than English, change this setting to match your preference. An alternative
54 # would be to set the environment variable EGG_LANG to that value.
55 #addlang "english"
56
57
58 ##### LOG FILES #####
59
60 # Eggdrop is capable of logging various things, from channel chatter to
61 # commands people use on the bot and file transfers. Logfiles are normally
62 # kept for 24 hours. Afterwards, they will be renamed to "(logfile).yesterday".
63 # After 48 hours, they will be overwritten by the logfile of the next day.
64 #
65 # Events are logged by certain categories. This way, you can specify
66 # exactly what kind of events you want sent to various logfiles.
67 #
68 # The most common log file flags are:
69 # m private msgs/ctcps to the bot
70 # k kicks, bans, mode changes on the channel
71 # j joins, parts, netsplits on the channel
72 # p public chatter on the channel
73 # s server connects/disconnects/notices
74 # b information about bot linking and userfile sharing
75 # c commands people use (via msg or dcc)
76 # x file transfers and file-area commands
77 # r (if use-console-r enabled) EVERYTHING sent to the bot by the server
78 # o other: misc info, errors -- IMPORTANT STUFF
79 # w wallops: msgs between IRCops (be sure to set the bot +w in init-server)
80 #
81 # There are others, but you probably shouldn't log them, it'd be rather
82 # unethical. ;) There are also eight user-defined levels (1-8) which
83 # are used by Tcl scripts.
84 #
85 # Each logfile belongs to a certain channel. Events of type 'k', 'j', and 'p'
86 # are logged to whatever channel they happened on. Most other events are
87 # currently logged to every channel. You can make a logfile belong to all
88 # channels by assigning it to channel "*".
89
90 # This is the maximum number of logfiles allowed. This setting can be
91 # increased; however, don't decrease it.
92 set max-logs 5
93
94 # This is the maximum size of your logfiles. Set it to 0 to disable.
95 # This value is in kilobytes, so '550' would mean cycle logs when it
96 # reaches the size of 550 kilobytes. Note that this only works if you
97 # have keep-all-logs 0 (OFF).
98 set max-logsize 0
99
100 # This could be good if you have had problem with the logfile filling
101 # your quota/hard disk or if you log +p and publish it to the web and
102 # need more up-to-date info. Note that this setting might increase the
103 # CPU usage of your bot (on the other hand it will decrease your mem usage).
104 set quick-logs 0
105
106 # This creates a logfile named eggdrop.log containing private msgs/ctcps,
107 # commands, errors, and misc. info from any channel.
108 logfile mco * "logs/eggdrop.log"
109
110 # This creates a logfile named lamest.log containing joins, parts,
111 # netsplits, kicks, bans, mode changes, and public chat on the
112 # channel #lamest.
113 logfile jpk #lamest "logs/lamest.log"
114
115 # Use this feature to timestamp entries in the log file.
116 set log-time 1
117
118 # If you want to keep your logfiles forever, turn this setting on. All
119 # logfiles will get suffix ".[day, 2 digits][month, 3 letters][year, 4 digits]".
120 # Note that your quota/hard-disk might be filled by this, so check your logfiles
121 # often and download them.
122 set keep-all-logs 0
123
124 # If keep-all-logs is 1, this setting will define the suffix of the logfiles.
125 # The default will result in a suffix like "04May2000". "%Y%m%d" will produce
126 # the often used yyyymmdd format. Read the strftime manpages for more options.
127 # NOTE: On systems which don't support strftime, the default format will
128 # be used _always_.
129 set logfile-suffix ".%d%b%Y"
130
131 # You can specifiy when Eggdrop should switch logfiles and start fresh. You
132 # must use military time for this setting. 300 is the default, and describes
133 # 03:00 (AM).
134 set switch-logfiles-at 300
135
136 # "Writing user file..." and "Writing channel file..." messages won't be
137 # logged anymore if this option is enabled.
138 set quiet-save 0
139
140
141 ##### CONSOLE #####
142
143 # This is the default console mode. It uses the same event flags as the log
144 # files do. The console channel is automatically set to your "primary" channel,
145 # which is set in the modules section of the config file. Masters can change
146 # their console channel and modes with the '.console' command.
147
148 set console "mkcobxs"
149
150
151 ##### FILES AND DIRECTORIES #####
152
153 # Specify here the filename your userfile should be saved as.
154 set userfile "LamestBot.user"
155
156 # Specify here the filename Eggdrop will save its pid to. If no pidfile is
157 # specified, pid.(botnet-nick) will be used.
158 #set pidfile "pid.LamestBot"
159
160 # If you want your userfile to be sorted upon saving, enable this setting.
161 # This causes the bot to use bit more CPU when saving the usefile.
162 set sort-users 0
163
164 # Specify here where Eggdrop should look for help files. Don't modify this
165 # setting unless you know what you're doing!
166 set help-path "help/"
167
168 # Specify here where Eggdrop should look for text files. This is used for
169 # certain Tcl and DCC commands.
170 set text-path "text/"
171
172 # Set here a place to store temporary files.
173 set temp-path "/tmp"
174
175 # The MOTD (Message Of The day) is displayed when people dcc chat or telnet
176 # to the bot. Look at doc/text-substitutions.doc for options.
177 set motd "text/motd"
178
179 # This banner will be displayed on telnet connections. Look at
180 # doc/text-substitutions.doc for options.
181 set telnet-banner "text/banner"
182
183 # This specifies what permissions the user, channel, and notes files should
184 # be set to. The octal values are the same as for the chmod system command.
185 #
186 # To remind you:
187 #
188 # u g o u g o u g o
189 # 0600 rw------- 0400 r-------- 0200 -w------- u - user
190 # 0660 rw-rw---- 0440 r--r----- 0220 -w--w---- g - group
191 # 0666 rw-rw-rw- 0444 r--r--r-- 0222 -w--w--w- o - others
192 #
193 # Note that the default 0600 is the most secure one and should only be changed
194 # if you need your files for shell scripting or other external applications.
195 set userfile-perm 0600
196
197
198 ##### BOTNET/DCC/TELNET #####
199
200 # Settings in this section should be unimportant for you until you deal
201 # with botnets (multiple Eggdrops connected together to maximize efficiency).
202 # You should read doc/BOTNET before modifying these settings.
203
204 # If you want to use a different nickname on the botnet than you use on
205 # IRC (i.e. if you're on an un-trusted botnet), un-comment the next line
206 # and set it to the nick you would like to use.
207 #set botnet-nick "LlamaBot"
208
209 # This opens a telnet port by which you and other bots can
210 # interact with the Eggdrop by telneting in.
211 #
212 # There are more options for the listen command in doc/tcl-commands.doc.
213 # Note, if you are running more than one bot on the same machine, you will
214 # want to space the telnet ports at LEAST 5 apart. 10 is even better.
215 #
216 # Valid ports are typically anything between 1025 and 65535 assuming the
217 # port is not already in use.
218 #
219
220 # If you would like the bot to listen for users and bots in separate ports,
221 # use the following format.
222 #
223 # listen 3333 bots
224 # listen 4444 users
225 #
226 # If you wish to use only one port, use this format:
227 listen 3333 all
228
229 # This setting defines whether or not people can boot users on the Eggdrop
230 # from other bots in your botnet. Valid settings are:
231 # 0 - allow *no* outside boots
232 # 1 - allow boots from sharebots
233 # 2 - allow any boots
234 set remote-boots 2
235
236 # This setting prohibits remote bots from telling your Eggdrop to unlink from
237 # share bots.
238 set share-unlinks 1
239
240 # This setting will drop telnet connections not matching a known host. It
241 # greatly improves protection from IRCops, but makes it impossible to add
242 # hosts on limbo (NOIRC) bots or have NEW as a valid login.
243 set protect-telnet 0
244
245 # This setting will make the bot ignore DCC chat requests which appear to
246 # have bogus information on the grounds that the user may have been trying
247 # to make the bot connect to somewhere that will get it into trouble, or
248 # that the user has a broken client (like mIRC tends to do), in which case
249 # the connect wouldn't work anyway. It's suggested that you turn this on.
250 set dcc-sanitycheck 0
251
252 # This settings defines a time in seconds that the bot should wait before
253 # a dcc chat, telnet, or relay connection times out.
254 set ident-timeout 5
255
256 # Define here whether or not a +o user still needs the +p flag to dcc the bot.
257 set require-p 0
258
259 # If you want people allow to telnet in and type 'NEW' to become a new user,
260 # set this to 1. This is similar to the 'hello' msg command. The protect-telnet
261 # setting must be set to 0 to use this.
262 set open-telnets 0
263
264 # If you don't want Eggdrop to identify itself as an eggdrop on a telnet connection,
265 # set this setting to 1. Eggdrop will display 'Nickname' instead.
266 set stealth-telnets 0
267
268 # If you want Eggdrop to display a banner when telneting in, set this setting
269 # to 1. The telnet banner is set by 'set telnet-banner'.
270 set use-telnet-banner 0
271
272 # This settings defines a time in seconds that the bot should wait before
273 # a dcc chat, telnet, or relay connection times out.
274 set connect-timeout 15
275
276 # Specify here the number of lines to accept from a user on the partyline
277 # within 10 seconds before they are considered to be flooding and therefore
278 # get booted.
279 set dcc-flood-thr 3
280
281 # Define here how many telnet connection attempts in how many seconds from
282 # the same host constitute a flood. The correct format is Attempts:Seconds.
283 set telnet-flood 5:60
284
285 # If you want telnet-flood to apply even to +f users, set this setting to 1.
286 set paranoid-telnet-flood 1
287
288 # Set here the amount of seconds before giving up on hostname/address
289 # lookup (you might want to increase this if you are on a slow network).
290 set resolve-timeout 15
291
292
293 ##### MORE ADVANCED SETTINGS #####
294
295 # Set this to your socks host if your Eggdrop sits behind a firewall.
296 # If you use a Sun "telnet passthru" firewall, use this setting:
297 #set firewall "!sun-barr.ebay:3666"
298
299 # If you have a NAT firewall (you box has an IP in one of the following
300 # ranges: 192.168.0.0-192.168.255.255, 172.16.0.0-172.31.255.255,
301 # 10.0.0.0-10.255.255.255 and your firewall transparently changes your
302 # address to a unique address for your box) or you have IP masquerading
303 # between you and the rest of the world, and /dcc chat,/ctcp chat or
304 # userfile sharing aren't working, enter your outside IP here. Do not
305 # enter anything for my-ip or my-hostname if you use this setting.
306 #set nat-ip "127.0.0.1"
307
308 # If you want all dcc file transfers to use a particular portrange either
309 # because you're behind a firewall, or for other security reasons, set it
310 # here.
311 #set reserved-portrange 2010:2020
312
313 # Set the time in minutes that temporary ignores should last.
314 set ignore-time 15
315
316 # Define here what Eggdrop considers 'hourly'. All calls to it, including such
317 # things as note notifying or userfile saving, are affected by this. For example:
318 #
319 # set hourly-updates 15
320 #
321 # The bot will save its userfile 15 minutes past every hour.
322 set hourly-updates 00
323
324 # Un-comment the next line and set the list of owners of the bot.
325 # You NEED to change this setting.
326 #set owner "MrLame, MrsLame"
327
328 # Who should a note be sent to when new users are learned?
329 set notify-newusers "$owner"
330
331 # Enter the flags that all new users should get by default. See '.help whois'
332 # on the partyline for a list of flags and their descriptions.
333 set default-flags "hp"
334
335 # Enter all user-defined fields that should be displayed in a '.whois'.
336 # This will only be shown if the user has one of these extra fields.
337 # You might prefer to comment this out and use the userinfo1.0.tcl script
338 # which provides commands for changing all of these.
339 set whois-fields "url birthday"
340
341 # Enable this setting if you want your Eggdrop to die upon receiving a SIGHUP
342 # kill signal. Otherwise, the Eggdrop will just save its userfile and rehash.
343 set die-on-sighup 0
344
345 # Enable this setting if you want your Eggdrop to die upon receiving a SIGTERM
346 # kill signal. Otherwise, the Eggdrop will just save its userfile and rehash.
347 set die-on-sigterm 1
348
349 # Comment these two lines if you wish to enable the .tcl and .set commands.
350 # If you select your owners wisely, you should be okay enabling these.
351 unbind dcc n tcl *dcc:tcl
352 unbind dcc n set *dcc:set
353
354 # If you enable this setting, only permanent owners (owner setting) will be
355 # able to use .tcl and .set. Moreover, if you want only let permanent owners
356 # use .dump, then set this to 2.
357 set must-be-owner 1
358
359 # Comment out this line to add the 'simul' partyline command (owners
360 # can manipulate other people on the party line). Please select owners
361 # wisely and use this command ethically!
362 unbind dcc n simul *dcc:simul
363
364 # Set here the maximum number of dcc connections you will allow. You can
365 # increase this later, but never decrease it.
366 set max-dcc 50
367
368 # Enable this setting if you want to enable the 'dccsimul' Tcl command.
369 set enable-simul 1
370
371 # Enable this setting if you want +d & +k users to use commands bound as -|-.
372 set allow-dk-cmds 1
373
374 # If your Eggdrop rejects bots that actually have already disconnected from
375 # another hub, but the disconnect information has not yet spread over the
376 # botnet due to lag, use this setting. The bot will wait dupwait-timeout
377 # seconds before it checks again and then finally reject the bot.
378 set dupwait-timeout 5
379
380 # You MUST remove this line for your bot to start. This has been added to
381 # prevent you from starting up a bot that is not fully configured. Bots
382 # that have not been fully configured may join the wrong IRC network, the
383 # wrong channels, or generally do things that you do not want. Please make
384 # sure that you have double-checked every setting. There's also a similar line
385 # lower down, just to make sure you're reading :)
386 die "Please make sure you edit your config file completely."
387
388
389 ##### MODULES #####
390
391 # Below are various settings for the modules included with Eggdrop.
392 # PLEASE READ AND EDIT THEM CAREFULLY, even if you're an old hand at
393 # Eggdrop, things change.
394
395 # This path specifies the path were Eggdrop should look for its modules.
396 # If you run the bot from the compilation directory, you will want to set
397 # this to "". If you use 'make install' (like all good kiddies do ;), this
398 # is a fine default. Otherwise, use your head :)
399 set mod-path "modules/"
400
401
402 #### DNS MODULE ####
403
404 # This module provides asynchronous dns support. This will avoid long
405 # periods where the bot just hangs there, waiting for a hostname to
406 # resolve, which will often let it timeout on all other connections.
407 loadmodule dns
408
409 #### CHANNELS MODULE ####
410
411 # This module provides channel related support for the bot. Without it,
412 # you won't be able to make the bot join a channel or save channel
413 # specific userfile information.
414 loadmodule channels
415
416 # Enter here the filename where dynamic channel settings are stored.
417 set chanfile "LamestBot.chan"
418
419 # Set this setting to 1 if you want your bot to expire bans/exempts/invites set
420 # by other opped bots on the channel.
421 set force-expire 0
422
423 # Set this setting to 1 if you want your bot to share user greets with other
424 # bots on the channel if sharing user data.
425 set share-greet 0
426
427 # Set this setting to 1 if you want to allow users to store an info line.
428 set use-info 1
429
430 # The following settings are used as default values when you .+chan #chan or .tcl
431 # channel add #chan. Look in the section below for explanation of every option.
432
433 set global-flood-chan 10:60
434 set global-flood-deop 3:10
435 set global-flood-kick 3:10
436 set global-flood-join 5:60
437 set global-flood-ctcp 3:60
438 set global-flood-nick 5:60
439 set global-aop-delay 5:30
440 set global-idle-kick 0
441 set global-chanmode "nt"
442 set global-stopnethack-mode 0
443 set global-revenge-mode 1
444 set global-ban-time 120
445 set global-exempt-time 60
446 set global-invite-time 60
447
448 set global-chanset {
449 -autoop -autovoice
450 -bitch +cycle
451 +dontkickops +dynamicbans
452 +dynamicexempts +dynamicinvites
453 -enforcebans +greet
454 -inactive -nodesynch
455 -protectfriends +protectops
456 -revenge -revengebot
457 -secret -seen
458 +shared +statuslog
459 +userbans +userexempts
460 +userinvites -protecthalfops
461 -autohalfop
462 }
463
464 # Add each static channel you want your bot to sit in using the following
465 # command. There are many different possible settings you can insert into
466 # this command, which are explained below.
467 #
468 # channel add #lamest {
469 # chanmode "+nt-likm"
470 # idle-kick 0
471 # stopnethack-mode 0
472 # revenge-mode 1
473 # ban-time 120
474 # exempt-time 60
475 # invite-time 60
476 # aop-delay 5:30
477 # need-op { putserv "PRIVMSG #lamest :op me cos i'm lame!" }
478 # need-invite { putserv "PRIVMSG #lamest :let me in!" }
479 # need-key { putserv "PRIVMSG #lamest :let me in!" }
480 # need-unban { putserv "PRIVMSG #lamest :let me in!" }
481 # need-limit { putserv "PRIVMSG #lamest :let me in!" }
482 # flood-chan 10:60
483 # flood-deop 3:10
484 # flood-kick 3:10
485 # flood-join 5:60
486 # flood-ctcp 3:60
487 # flood-nick 5:60
488 # }
489 #
490 # chanmode +/-<modes>
491 # This setting makes the bot enforce channel modes. It will always add
492 # the +<modes> and remove the -<modes> modes.
493 # idle-kick 0
494 # This setting will make the bot check every minute for idle
495 # users. Set this to 0 to disable idle check.
496 #
497 # stopnethack-mode 0
498 # This setting will make the bot de-op anyone who enters the channel
499 # with serverops. There're seven different modes for this settings:
500 # 0 turn off,
501 # 1 isoptest (allow serverop if registered op)
502 # 2 wasoptest (allow serverop if op before split)
503 # 3 allow serverop if isop or wasop
504 # 4 allow serverop if isop and wasop.
505 # 5 If the channel is -bitch, see stopnethack-mode 3
506 # If the channel is +bitch, see stopnethack-mode 1
507 # 6 If the channel is -bitch, see stopnethack-mode 2
508 # If the channel is +bitch, see stopnethack-mode 4
509 #
510 # revenge-mode 1
511 # This settings defines how the bot should punish bad users when
512 # revenging. There are four possible settings:
513 # 0 Deop the user.
514 # 1 Deop the user and give them the +d flag for the channel.
515 # 2 Deop the user, give them the +d flag for the channel, and kick them.
516 # 3 Deop the user, give them the +d flag for the channel, kick, and ban them.
517 #
518 # ban-time 120
519 # Set here how long temporary bans will last (in minutes). If you
520 # set this setting to 0, the bot will never remove them.
521 #
522 # exempt-time 60
523 # Set here how long temporary exempts will last (in minutes). If you
524 # set this setting to 0, the bot will never remove them. The bot will
525 # check the exempts every X minutes, but will not remove the exempt if
526 # a ban is set on the channel that matches that exempt. Once the ban is
527 # removed, then the exempt will be removed the next time the bot checks.
528 # Please note that this is an IRCnet feature.
529 #
530 # invite-time 60
531 # Set here how long temporary invites will last (in minutes). If you
532 # set this setting to 0, the bot will never remove them. The bot will
533 # check the invites every X minutes, but will not remove the invite if
534 # a channel is set to +i. Once the channel is -i then the invite will be
535 # removed the next time the bot checks. Please note that this is an IRCnet
536 # feature.
537 #
538 # aop-delay (minimum:maximum)
539 # This is used for autoop, autohalfop, autovoice. If an op or voice joins a
540 # channel while another op or voice is pending, the bot will attempt to put
541 # both modes on one line.
542 # aop-delay 0 No delay is used.
543 # aop-delay X An X second delay is used.
544 # aop-delay X:Y A random delay between X and Y is used.
545 #
546 # need-op { putserv "PRIVMSG #lamest :op me cos i'm lame!" }
547 # This setting will make the bot run the script enclosed in brackets
548 # if it does not have ops. This must be shorter than 120 characters.
549 # If you use scripts like getops.tcl or botnetop.tcl, you don't need
550 # to set this setting.
551 #
552 # need-invite { putserv "PRIVMSG #lamest :let me in!" }
553 # This setting will make the bot run the script enclosed in brackets
554 # if it needs an invite to the channel. This must be shorter than 120
555 # characters. If you use scripts like getops.tcl or botnetop.tcl, you
556 # don't need to set this setting.
557 #
558 # need-key { putserv "PRIVMSG #lamest :let me in!" }
559 # This setting will make the bot run the script enclosed in brackets
560 # if it needs the key to the channel. This must be shorter than 120
561 # characters. If you use scripts like getops.tcl or botnetop.tcl, you
562 # don't need to set this setting
563 #
564 # need-unban { putserv "PRIVMSG #lamest :let me in!" }
565 # This setting will make the bot run the script enclosed in brackets
566 # if it needs to be unbanned on the channel. This must be shorter than
567 # 120 characters. If you use scripts like getops.tcl or botnetop.tcl,
568 # you don't need to set this setting
569 #
570 # need-limit { putserv "PRIVMSG #lamest :let me in!" }
571 # This setting will make the bot run the script enclosed in brackets
572 # if it needs the limit to be raised on the channel. This must be
573 # shorter than 120 characters. If you use scripts like getops.tcl or
574 # botnetop.tcl, you don't need to set this setting
575 #
576 # flood-chan 10:60
577 # Set here how many channel messages in how many seconds from one
578 # host constitutes a flood. Setting this to 0 or 0:0 disables
579 # flood protection for the channel.
580 #
581 # flood-deop 3:10
582 # Set here how many deops in how many seconds from one host constitutes
583 # a flood. Setting this to 0 or 0:0 disables deop flood protection for
584 # the channel.
585 #
586 # flood-kick 3:10
587 # Set here how many kicks in how many seconds from one host constitutes
588 # a flood. Setting this to 0 or 0:0 disables kick flood protection for
589 # the channel.
590 #
591 # flood-join 5:60
592 # Set here how many joins in how many seconds from one host constitutes
593 # a flood. Setting this to 0 or 0:0 disables join flood protection for
594 # the channel.
595 #
596 # flood-ctcp 3:60
597 # Set here how many channel ctcps in how many seconds from one host
598 # constitutes a flood. Setting this to 0 or 0:0 disables ctcp flood
599 # protection for the channel.
600 #
601 # flood-nick 5:60
602 # Set here how many nick changes in how many seconds from one host
603 # constitutes a flood. Setting this to 0 or 0:0 disables nick flood
604 # protection for the channel.
605 #
606 # There are many different options for channels which you can
607 # define. They can be enabled or disabled using the channel set command by a
608 # plus or minus in front of them.
609 #
610 # channel set #lamest +enforcebans +dynamicbans +userbans +dynamicexempts
611 # channel set #lamest +userexempts +dynamicinvites +userinvites +protectops
612 # channel set #lamest +protectfriends +statuslog +revenge -protecthalfops
613 # channel set #lamest +revengebot +dontkickops +autovoice -autoop -autohalfop
614 # channel set #lamest -bitch -secret -shared +greet +cycle
615 #
616 # A complete list of all available channel settings:
617 #
618 # enforcebans
619 # When a ban is set, kick people who are on the channel and match
620 # the ban?
621 #
622 # dynamicbans
623 # Only activate bans on the channel when necessary? This keeps
624 # the channel's ban list from getting excessively long. The bot
625 # still remembers every ban, but it only activates a ban on the
626 # channel when it sees someone join who matches that ban.
627 #
628 # userbans
629 # Allow bans to be made by users directly? If turned off, the bot
630 # will require all bans to be made through the bot's console.
631 #
632 # dynamicexempts
633 # Only activate exempts on the channel when necessary? This keeps
634 # the channel's exempt list from getting excessively long. The bot
635 # still remembers every exempt, but it only activates a exempt on
636 # the channel when it sees a ban set that matches the exempt. The
637 # exempt remains active on the channel for as long as the ban is
638 # still active.
639 #
640 # userexempts
641 # Allow exempts to be made by users directly? If turned off, the
642 # bot will require all exempts to be made through the bot's console.
643 #
644 # dynamicinvites
645 # Only activate invites on the channel when necessary? This keeps
646 # the channel's invite list from getting excessively long. The bot
647 # still remembers every invite, but the invites are only activated
648 # when the channel is set to invite only and a user joins after
649 # requesting an invite. Once set, the invite remains until the
650 # channel goes to -i.
651 #
652 # userinvites
653 # Allow invites to be made by users directly? If turned off, the
654 # bot will require all invites to be made through the bot's console.
655 #
656 # autoop
657 # Op users with the +o flag as soon as they join the channel?
658 # This is insecure and not recommended.
659 #
660 # authalfoop
661 # Halfop users with the +l flag as soon as they join the channel?
662 # This is insecure and not recommended.
663 #
664 # bitch
665 # Only let users with +o) flag be opped on the channel?
666 #
667 # greet
668 # Say a user's info line when they join the channel?
669 #
670 # protectops
671 # Re-op a user with the +o flag if they get deopped?
672 #
673 # protecthalfops
674 # Re-halfop a user with the +l flag if they get dehalfopped?
675 #
676 # protectfriends
677 # Re-op a user with the +f flag if they get deopped?
678 #
679 # statuslog
680 # Log the channel status line every 5 minutes? This shows the bot's
681 # status on the channel (op, voice, etc.), The channel's modes, and
682 # the number of +m/+o/+v/+n/+b/+e/+I users on the channel. A sample
683 # status line follows:
684 #
685 # [01:40] @#lamest (+istn) : [m/1 o/1 v/4 n/7 b/1 e/5 I/7]
686 #
687 # revenge
688 # Remember people who deop/kick/ban the bot, valid ops, or friends
689 # and punish them? Users with the +f flag are exempt from revenge.
690 #
691 # revengebot
692 # This is similar to to the 'revenge' option, but it only triggers
693 # if a bot gets deopped, kicked or banned.
694 #
695 # autovoice
696 # Voice users with the +v flag when they join the channel?
697 #
698 # secret
699 # Prevent this channel from being listed on the botnet?
700 #
701 # shared
702 # Share channel-related user info for this channel?
703 #
704 # cycle
705 # Cycle the channel when it has no ops?
706 #
707 # dontkickops
708 # Do you want the bot not to be able to kick users who have the +o
709 # flag, letting them kick-flood for instance to protect the channel
710 # against clone attacks.
711 #
712 # inactive
713 # This prevents the bot from joining the channel (or makes it leave
714 # the channel if it is already there). It can be useful to make the
715 # bot leave a channel without losing its settings, channel-specific
716 # user flags, channel bans, and without affecting sharing.
717 #
718 # seen
719 # Respond to seen requests in the channel? The seen module must be
720 # loaded for this to work.
721 #
722 # nodesynch
723 # Allow non-ops to perform channel modes? This can stop the bot from
724 # fighting with services such as ChanServ, or from kicking IRCops when
725 # setting channel modes without having ops.
726 #
727 # Here is a shorter example:
728 #
729 # channel add #botcentral {
730 # chanmode "+mntisl 1"
731 # idle-kick 1
732 # }
733 # channel set #botcentral +bitch +enforcebans -greet +revenge
734
735
736 #### SERVER MODULE ####
737
738 # This module provides the core server support. You have to load this
739 # if you want your bot to come on IRC. Not loading this is equivalent
740 # to the old NO_IRC define.
741 loadmodule server
742
743 # What is your network?
744 # 0 = EFnet (non +e/+I hybrid)
745 # 1 = IRCnet
746 # 2 = Undernet
747 # 3 = DALnet
748 # 4 = EFnet +e/+I hybrid
749 # 5 = Others
750 set net-type 0
751
752 # Set the nick the bot uses on IRC, and on the botnet
753 # unless you specify a separate botnet-nick, here.
754
755 set nick "Lamestbot"
756
757 # Set the alternative nick which the bot uses on IRC if the nick specified
758 # by 'set nick' is unavailable. All '?' characters will be replaced by random
759 # numbers.
760
761 set altnick "Llamab?t"
762
763 # Set what should be displayed in the real-name field for the bot on IRC.
764 set realname "/msg LamestBot hello"
765
766 # Set here a script to run (if any) when first connecting to a server.
767 # This is limited to 120 characters.
768 set init-server { putserv "MODE $botnick +i-ws" }
769
770 # Set the default port which should be used if none is specified with
771 # '.jump' or in 'set servers'.
772 set default-port 6667
773
774 # This is the bot's server list. The bot will start at the first server listed,
775 # and cycle through them whenever it gets disconnected. You need to change these
776 # servers to YOUR network's servers.
777 #
778 # The format is:
779 # server[:port[:password]]
780 #
781 # Both the port and password fields are optional; however, if you want to set a
782 # password you must also set a port. If a port isn't specified it will default to
783 # your default-port setting.
784 set servers {
785 you.need.to.change.this:6667
786 another.example.com:7000
787 }
788
789 # This setting makes the bot try to get his original nickname back if its
790 # primary nickname is already in use.
791 set keep-nick 1
792
793 # Set this to 1 if you don't want your the bot to strip a leading '~'
794 # on user@hosts.
795 set strict-host 0
796
797 # This setting makes the bot squelch the error message when rejecting a DCC
798 # CHAT or SEND. Normally it tells the DCC user that the CHAT or SEND has
799 # been rejected because they don't have access.
800 # Please note, sometimes IRC server operators detect bots that way.
801 set quiet-reject 1
802
803 # If you want your bot to answer lower case ctcp requests (non rfc-
804 # compliant), set this setting to 1. mIRC will do this, most other
805 # clients will not.
806 set lowercase-ctcp 0
807
808 # Set how many ctcps should be answered at once.
809 set answer-ctcp 3
810
811 # Set here how many msgs in how many seconds from one host constitutes
812 # a flood. If you set this to 0:0, msg flood protection will be disabled.
813 set flood-msg 5:60
814
815 # Set here how many ctcps in how many seconds from one host constitutes
816 # a flood. If you set this to 0:0, ctcp flood protection will be disabled.
817 set flood-ctcp 3:60
818
819 # This settings makes the bot cycle forever through the server list until
820 # it successfully connects to one.
821 set never-give-up 1
822
823 # Often, IRC servers call themselves a name other than their actual
824 # hostname. If you want Eggdrop to replace your entry in the config
825 # file with this name, set this to 1. If you set this setting to 0,
826 # Eggdrop will keep a separate list of what IRC servers call themselves.
827 set strict-servernames 0
828
829 # This setting defines how long Eggdrop should wait before moving from one
830 # server to another on disconnect. If you set 0 here, Eggdrop will not wait
831 # at all and will connect instantly. Setting this too low could result in
832 # your bot being K:Lined.
833 set server-cycle-wait 60
834
835 # Set here how long Eggdrop should wait for a response when connecting to a
836 # server before giving up and moving on to next server.
837 set server-timeout 60
838
839 # If the number of servers on the net gets below this number, the bot
840 # will jump to a new server (it will assume it's on the losing end of
841 # a netsplit). Set this to 0 to turn off. If your bot is running on
842 # any major IRC network, this should probably be turned off.
843 set servlimit 0
844
845 # Set this to 1 if Eggdrop should check for stoned servers? (where the
846 # server connection has died, but Eggdrop hasn't been notified yet).
847 set check-stoned 1
848
849 # This setting allows you the logging of all information received from the
850 # server via console mode 'r'.
851 # NOTE: This is a large security hole, allowing people to see user passwords.
852 # This is now restricted to +n users only. Please choose your owners with
853 # care.
854 set use-console-r 0
855
856 # This setting allows you the logging of all information sent to the server
857 # via console/log mode 'v'. It also allows logging of botnet traffic via
858 # console/log mode 't'.
859 # NOTE: This is a large security hole, allowing people to see passwords.
860 # This is now restricted to +n users only. Please choose your owners with
861 # care.
862 set debug-output 0
863
864 # If you want your bot to exit the server if it receives an ERROR message,
865 # set this to 1.
866 set serverror-quit 1
867
868 # Set here the maximum number of lines to queue to the server. If you're
869 # going to dump large chunks of text to people over IRC, you will probably
870 # want to raise this. 300 is fine for most people though.
871 set max-queue-msg 300
872
873 # If you want Eggdrop to trigger binds for ignored users, set this to 1.
874 set trigger-on-ignore 0
875
876 # Allow identical messages in the mode queue?
877 set double-mode 0
878
879 # Allow identical messages in the server queue?
880 set double-server 0
881
882 # Allow identical messages in the help queue?
883 set double-help 0
884
885 # This optimizes the kick queue. It also traces nick changes and parts in
886 # the channel and changes the kick queue accordingly. There are three
887 # different options for this setting:
888 # 0 = Turn it off.
889 # 1 = Optimize the kick queue by summarizing kicks.
890 # 2 = Trace nick changes and parts on the channel and change the queue
891 # accordingly. For example, bot will not try to kick users who have
892 # already parted the channel.
893 # ATTENTION: Setting 2 is very CPU intensive.
894 set optimize-kicks 1
895
896 # If your network supports more recipients per command then 1, you can
897 # change this behavior here. Set this to the number of recipients per
898 # command, or set this to 0 for unlimited.
899 set stack-limit 4
900
901 ### SERVER MODULE - OTHER NETWORKS (net-type 5) ###
902
903 # This settings defines how umode +r is understood by Eggdrop. Some
904 # networks use +r to indicate a restricted connection. If this is your
905 # case, and you want your bot to leave restricted servers and jump to
906 # the next server on its list, then set it to 1.
907 #set check-mode-r 1
908
909 # This setting allows you to specify the maximum nick-length supported by
910 # your network. The default setting is 9. The maximum supported length by
911 # Eggdrop is 32.
912 #set nick-len 9
913
914 #### CTCP MODULE ####
915
916 # This module provides the normal ctcp replies that you'd expect.
917 # Without it loaded, CTCP CHAT will not work. The server module
918 # is required for this module to function.
919 loadmodule ctcp
920
921 # Set here how the ctcp module should answer ctcps. There are 3 possible
922 # operating modes:
923 # 0: Normal behavior is used.
924 # 1: The bot ignores all ctcps, except for CHAT and PING requests
925 # by users with the +o flag.
926 # 2: Normal behavior is used, however the bot will not answer more
927 # than X ctcps in Y seconds (defined by 'set flood-ctcp').
928 set ctcp-mode 0
929
930 # There are also several variables to help make your bot less noticeable.
931 # They are: ctcp-version, ctcp-finger, and ctcp-userinfo. You can use set to set
932 # them to values you'd like.
933
934
935 #### IRC MODULE ####
936
937 # This module provides basic IRC support for your bot. You have to
938 # load this if you want your bot to come on IRC. The server and channels
939 # modules must be loaded for this module to function.
940 loadmodule irc
941
942 # Set this to 1 if you want to bounce all server bans.
943 set bounce-bans 1
944
945 # Set this to 1 if you want to bounce all server modes.
946 set bounce-modes 0
947
948 # Set here the maximum number of bans you want the bot to set on a channel.
949 # Eggdrop will not place any more bans if this limit is reached. Undernet
950 # and IRCnet currently allow 30 bans, EFnet allows 20, and DALnet allows 100.
951 set max-bans 20
952
953 # There is a global limit for +b/+e/+I modes. This limit is currently set to
954 # 30 on IRCu 2.10 servers.
955 set max-modes 30
956
957 # Set this to 1 if you want the bot to kick for control character/ctcp
958 # avalanches to a channel. Remember that if it does, it won't ban them.
959 # This can start kick floods.
960 set kick-fun 0
961
962 # Set this to 1 if you want the bot to ban for control character/ctcp
963 # avalanches to a channel. This can prevent kick floods, but it also can
964 # fill the banlist.
965 set ban-fun 0
966
967 # If you want people to be able to add themselves to the bot's userlist
968 # with the default userflags (defined above in the config file) via the
969 # 'hello' msg command, set this to 1.
970 set learn-users 0
971
972 # Set here the time (in seconds) to wait for someone to return from
973 # a netsplit (i.e. wasop will expire afterwards). Set this to 1500
974 # on IRCnet since its nick delay stops after 30 minutes.
975 set wait-split 600
976
977 # Set here the time (in seconds) that someone must have been off-channel
978 # before re-displaying their info line.
979 set wait-info 180
980
981 # Set this to the maximum number of bytes to send in the arguments
982 # of modes sent to the server. Most servers default this to 200.
983 set mode-buf-length 200
984
985 # Many IRCops find bots by seeing if they reply to 'hello' in a msg.
986 # You can change this to another word by un-commenting the following
987 # two lines and changing "myword" to the word wish to use instead of
988 # 'hello'. It must be a single word.
989 #unbind msg - hello *msg:hello
990 #bind msg - myword *msg:hello
991
992 # Many takeover attempts occur due to lame users blindly /msg ident'ing to
993 # the bot and attempting to guess passwords. We now unbind this command by
994 # default to discourage them. You can enable this command by un-commenting
995 # the following two lines.
996 unbind msg - ident *msg:ident
997 unbind msg - addhost *msg:addhost
998
999 # If you are so lame you want the bot to display peoples info lines, even
1000 # when you are too lazy to add their chanrecs to a channel, set this to 1.
1001 # *NOTE* This means *every* user with an info line will have their info
1002 # line displayed on EVERY channel they join (provided they have been gone
1003 # longer than wait-info).
1004 set no-chanrec-info 0
1005
1006 ### IRC MODULE - IRCnet SPECIFIC FEATURES (net-type 1) ###
1007
1008 # Attention: Use these settings *only* if you set 'net-type' to 1!
1009
1010 # Set this to 1 if you want to bounce all server exemptions (+e modes).
1011 set bounce-exempts 0
1012
1013 # Set this to 1 if you want to bounce all server invitations (+I modes).
1014 set bounce-invites 0
1015
1016 # Set here the maximum number of exempts you want Eggdrop to set
1017 # on a channel. Eggdrop will not place any more exempts if this
1018 # limit is reached.
1019 set max-exempts 20
1020
1021 # Set here the maximum number of invites you want Eggdrop to set
1022 # on a channel. Eggdrop will not place any more invites if this
1023 # limit is reached.
1024 set max-invites 20
1025
1026 # The following settings should be left commented unless the default values
1027 # are being overridden. By default, exempts and invites are on for IRCnet,
1028 # but off for all other large networks. This behavior can be modified with
1029 # the following 2 flags. If your network doesn't support +e/+I modes then you
1030 # will be unable to use these features.
1031 #
1032 # Do you want to enable exempts?
1033 #set use-exempts 0
1034
1035 # Do you want to use invites?
1036 #set use-invites 0
1037
1038 # At the moment, the current IRCnet IRCd version (2.10) doesn't support the mixing
1039 # of b,o and v modes with e and I modes. This might be changed in the future, so
1040 # use 1 at the moment for this setting.
1041 set prevent-mixing 1
1042
1043 ### IRC MODULE - OTHER NETWORKS (net-type 5) ###
1044
1045 # Attention: Use these settings *only* if you set 'net-type' to 5!
1046
1047 # If your network supports more users per kick command then 1, you can
1048 # change this behavior here. Set this to the number of users to kick at
1049 # once, or set this to 0 for all at once.
1050 #set kick-method 1
1051
1052 # Some networks allow you to stack lots of channel modes into one line.
1053 # They're all guaranteed to support at least 3, so that's the default.
1054 # If you know your network supports more, you may want to adjust this.
1055 # This setting is limited to 6, although if you want to use a higher value,
1056 # you can modify this by changing the value of MODES_PER_LINE_MAX in
1057 # src/chan.h and recompiling the bot.
1058 #set modes-per-line 3
1059
1060 # Some networks don't include the +l limit and +k or -k key modes
1061 # in the modes-per-line (see above) limitation. Set include-lk to 0 for
1062 # these networks.
1063 #set include-lk 1
1064
1065 # Set this to 1 if your network uses IRCu2.10.01 specific /who requests.
1066 # Eggdrop can, therefore, ask only for exactly what's needed.
1067 #set use-354 0
1068
1069 # If your network doesn't use rfc 1459 compliant string matching routines,
1070 # set this to 0.
1071 #set rfc-compliant 1
1072
1073
1074 #### TRANSFER MODULE ####
1075
1076 # The transfer module provides dcc send/get support and userfile transfer
1077 # support for userfile sharing. Un-comment the next line to load it if you
1078 # need this functionality.
1079 #loadmodule transfer
1080
1081 # Set here the maximum number of simultaneous downloads to allow for
1082 # each user.
1083 set max-dloads 3
1084
1085 # Set here the block size for dcc transfers. ircII uses 512 bytes,
1086 # but admits that may be too small. 1024 is standard these days.
1087 # Set this to 0 to use turbo-dcc (recommended).
1088 set dcc-block 1024
1089
1090 # Enable this setting if you want to copy files into the /tmp directory
1091 # before sending them. This is useful on most systems for file stability,
1092 # but if your directories are NFS mounted, it's a pain, and you'll want
1093 # to set this to 0. If you are low on disk space, you may also want to
1094 # set this to 0.
1095 set copy-to-tmp 1
1096
1097 # Set here the time (in seconds) to wait before an inactive transfer
1098 # times out.
1099 set xfer-timeout 30
1100
1101
1102 #### SHARE MODULE ####
1103
1104 # This module provides userfile sharing support between two directly
1105 # linked bots. The transfer and channels modules are required for this
1106 # module to correctly function. Un-comment the following line to load
1107 # the share module.
1108 #loadmodule share
1109
1110 # Settings in this section must be un-commented before setting.
1111
1112 # When two bots get disconnected, this setting allows them to create a
1113 # resync buffer which saves all changes done to the userfile during
1114 # the disconnect. When they reconnect, they will not have to transfer
1115 # the complete user file, but, instead, just send the resync buffer.
1116 #
1117 # NOTE: This has been known to cause loss of channel flags and other
1118 # problems. Using this setting is not recommended.
1119 #set allow-resync 0
1120
1121 # This setting specifies how long to hold another bots resync data
1122 # before flushing it.
1123 #set resync-time 900
1124
1125 # When sharing user lists, DON'T ACCEPT global flag changes from other bots?
1126 # NOTE: The bot will still send changes made on the bot, it just won't accept
1127 # any global flag changes from other bots.
1128 #set private-global 0
1129
1130 # When sharing user lists, if private-global isn't set, which global flag
1131 # changes from other bots should be ignored?
1132 #set private-globals "mnot"
1133
1134 # When sharing user lists, don't accept ANY userfile changes from other
1135 # bots? Paranoid people should use this feature on their hub bot. This
1136 # will force all userlist changes to be made via the hub.
1137 #set private-user 0
1138
1139 # This setting makes the bot discard its own bot records in favor of
1140 # the ones sent by the hub.
1141 # NOTE: No passwords or botflags are shared, only ports and
1142 # address are added to sharing procedure. This only works with hubs that
1143 # are v1.5.1 or higher.
1144 #set override-bots 0
1145
1146
1147 #### COMPRESS MODULE ####
1148
1149 # This module provides provides support for file compression. This allows the
1150 # bot to transfer compressed user files and therefore save a significant amount
1151 # of bandwidth. The share module must be loaded to load this module. Un-comment
1152 # the following line to the compress module.
1153 #loadmodule compress
1154
1155 # Allow compressed sending of user files? The user files are
1156 # compressed with the compression level defined in `compress-level'.
1157 set share-compressed 1
1158
1159 # This is the default compression level used.
1160 #set compress-level 9
1161
1162
1163 #### FILESYSTEM MODULE ####
1164
1165 # This module provides an area within the bot where users can store
1166 # files. With this module, the bot is usable as a file server. The
1167 # transfer module is required for this module to function. Un-comment
1168 # the following line to load the filesys module.
1169 #loadmodule filesys
1170
1171 # Set here the 'root' directory for the file system.
1172 set files-path "/home/mydir/filesys"
1173
1174 # If you want to allow uploads, set this to the directory uploads
1175 # should be put into. Set this to "" if you don't want people to
1176 # upload files to your bot.
1177 set incoming-path "/home/mydir/filesys/incoming"
1178
1179 # If you don't want to have a central incoming directory, but instead
1180 # want uploads to go to the current directory that a user is in, set
1181 # this setting to 1.
1182 set upload-to-pwd 0
1183
1184 # Eggdrop creates a '.filedb' file in each subdirectory of your file area
1185 # to keep track of its own file system information. If you can't do that (for
1186 # example, if the dcc path isn't owned by you, or you just don't want it to do
1187 # that) specify a path here where you'd like all of the database files to be
1188 # stored instead.
1189 set filedb-path ""
1190
1191 # Set here the maximum number of people that can be in the file area at once.
1192 # Setting this to 0 makes it effectively infinite.
1193 set max-file-users 20
1194
1195 # Set here the maximum allowable file size that will be received (in kb).
1196 # Setting this to 0 makes it effectively infinite.
1197 set max-filesize 1024
1198
1199
1200 #### NOTES MODULE ####
1201
1202 # This module provides support for storing of notes for users from each
1203 # other. Note sending between currently online users is supported in the
1204 # core, this is only for storing the notes for later retrieval.
1205 loadmodule notes
1206
1207 # Set here the filename where private notes between users are stored.
1208 set notefile "LamestBot.notes"
1209
1210 # Set here the maximum number of notes to allow to be stored for
1211 # each user (to prevent flooding).
1212 set max-notes 50
1213
1214 # Set here how long (in days) to store notes before expiring them.
1215 set note-life 60
1216
1217 # Set this to 1 if you want to allow users to specify a forwarding
1218 # address for forwarding notes to another account on another bot.
1219 set allow-fwd 0
1220
1221 # Set this to 1 if you want the bot to let people know hourly if they
1222 # have any notes.
1223 set notify-users 1
1224
1225 # Set this to 1 if you want the bot to let people know on join if they
1226 # have any notes.
1227 set notify-onjoin 1
1228
1229 # Comment out this next line. Otherwise, your bot won't start.
1230 die "You didn't edit your config file completely like you were told, did you?"
1231
1232
1233 #### CONSOLE MODULE ####
1234
1235 # This module provides storage of console settings when you exit the
1236 # bot or type .store on the partyline.
1237 loadmodule console
1238
1239 # Save users console settings automatically? Otherwise, they have
1240 # to use the .store command.
1241 set console-autosave 1
1242
1243 # If a user doesn't have any console settings saved, which channel
1244 # do you want them automatically put on?
1245 set force-channel 0
1246
1247 # Enable this setting if a user's global info line should be displayed
1248 # when they join a botnet channel.
1249 set info-party 0
1250
1251
1252 #### WOOBIE MODULE ####
1253
1254 # This is for demonstrative purposes only. If you are looking for starting
1255 # point in writing modules, woobie is the right thing.
1256 #loadmodule woobie
1257
1258
1259 #### SEEN MODULE ####
1260
1261 # This module provides very basic seen commands via msg, on channel or via dcc.
1262 # This module works only for users in the bot's userlist. If you are looking for
1263 # a better and more advanced seen module, try the gseen module by G'Quann. You
1264 # can find it at http://www.visions-of-fantasy.de/gseen.mod/.
1265 #loadmodule seen
1266
1267
1268 #### BLOWFISH MODULE ####
1269
1270 # IF YOU DON'T READ THIS YOU MAY RENDER YOUR USERFILE USELESS LATER
1271 # Eggdrop encrypts its userfile, so users can have secure passwords.
1272 # Please note that when you change your encryption method later (i.e.
1273 # using other modules like a md5 module), you can't use your current
1274 # userfile anymore. Eggdrop will not start without an encryption module.
1275 #loadmodule blowfish
1276
1277
1278 #### ASSOC MODULE ####
1279
1280 # This module provides assoc support, i.e. naming channels on the botnet.
1281 # You can load it by un-commenting the following line.
1282 #loadmodule assoc
1283
1284
1285 #### WIRE MODULE ####
1286
1287 # This module provides all the standard .wire commands via dcc. It is an
1288 # encrypted partyline communication tool, compatible with wire.tcl. An
1289 # encryption module must be loaded to use this module. Un-comment the
1290 # following line to load the wire module.
1291 #loadmodule wire
1292
1293 #### UPTIME MODULE ####
1294
1295 # This module reports uptime statistics to http://uptime.eggheads.org.
1296 # Go look and see what your uptime is! It takes about 9 hours to show up,
1297 # so if your bot isn't listed, try again later. The server module must be
1298 # loaded for this module to function.
1299 #
1300 # Information sent to the server includes the bot's uptime, botnet-nick,
1301 # server, version, and IP address. This information is stored in a temporary
1302 # logfile for debugging purposes only. The only publicly available information
1303 # will be the bot's botnet-nick, version and uptime. If you do not wish for this
1304 # information to be sent, comment out the following line.
1305 loadmodule uptime
1306
1307 ##### SCRIPTS #####
1308
1309 # This is a good place to load scripts to use with your bot.
1310
1311 # This line loads script.tcl from the scripts directory inside your Eggdrop's
1312 # directory. All scripts should be put there, although you can place them where
1313 # you like as long as you can supply a fully qualified path to them.
1314 #
1315 # source scripts/script.tcl
1316
1317 source scripts/alltools.tcl
1318 source scripts/action.fix.tcl
1319
1320 # Use this script for Tcl and Eggdrop downwards compatibility.
1321 # NOTE: This can also cause problems with some newer scripts.
1322 source scripts/compat.tcl
1323
1324 # This script provides many useful informational functions, like setting
1325 # users' URLs, e-mail address, ICQ numbers, etc. You can modify it to add
1326 # extra entries.
1327 source scripts/userinfo.tcl
1328 loadhelp userinfo.help

webmaster@eggheads.org
ViewVC Help
Powered by ViewVC 1.1.23