/[cvs]/eggdrop1.6/eggdrop.conf
ViewVC logotype

Contents of /eggdrop1.6/eggdrop.conf

Parent Directory Parent Directory | Revision Log Revision Log | View Revision Graph Revision Graph


Revision 1.49 - (show annotations) (download)
Mon Feb 11 02:28:40 2008 UTC (11 years, 4 months ago) by guppy
Branch: MAIN
Changes since 1.48: +2 -2 lines
a couple of small fixes to the quotepass.tcl script

1 #! /path/to/executable/eggdrop
2 # ^- This should contain a fully qualified path to your Eggdrop executable.
3 #
4 # $Id: eggdrop.conf,v 1.48 2008-02-11 01:22:46 guppy Exp $
5 #
6 # This is a sample Eggdrop configuration file which includes all possible
7 # settings that can be used to configure your bot.
8 #
9 # The pound signs (#) that you see at the beginning of some lines mean that
10 # the remainder of that line is a comment, or just for your information. By
11 # adding or deleting pound signs, you can comment or uncomment a setting,
12 # respectively.
13 #
14 # Arguments for a command or setting may be inclosed in <>'s or []'s in the
15 # example/description. Arguments in <>'s are required, while [] means optional.
16 #
17 # More detailed descriptions of all these settings can be found in
18 # doc/settings/.
19
20
21
22 ##### BASIC SETTINGS #####
23
24 # This setting defines the username the bot uses on IRC. This setting has
25 # no effect if an ident daemon is running on your bot's machine.
26 set username "lamest"
27
28 # This setting defines which contact person should be shown in .status,
29 # /msg help, and other places. You really should include this information.
30 set admin "Lamer <email: lamer@lamest.lame.org>"
31
32 # This setting is used only for info to share with others on your botnet.
33 # Set this to the IRC network your bot is connected to.
34 set network "I.didn't.edit.my.config.file.net"
35
36 # This setting defines the timezone is your bot in. It's used for internal
37 # routines as well as for logfile timestamping and scripting purposes.
38 # The timezone string specifies the name of the timezone and must be three
39 # or more alphabetic characters. For example, Central European Time(UTC+1)
40 # should be "CET".
41 set timezone "EST"
42
43 # The offset setting specifies the time value to be added to the local
44 # time to get Coordinated Universal Time (UTC aka GMT). The offset is
45 # positive if the local timezone is west of the Prime Meridian and
46 # negative if it is east. The value (in hours) must be between -23 and
47 # 23. For example, if the timezone is UTC+1, the offset is -1.
48 set offset "5"
49
50 # If you don't want to use the timezone setting for scripting purposes only,
51 # but instead everywhere possible, un-comment the following line.
52 #set env(TZ) "$timezone $offset"
53
54 # If you're using virtual hosting (your machine has more than 1 IP), you
55 # may want to specify the particular IP to bind to. You can specify either
56 # by hostname or by IP. You may also want to set the hostname here if
57 # Eggdrop has trouble detecting it when it starts up.
58 #set my-hostname "virtual.host.com"
59 #set my-ip "99.99.0.0"
60
61 # If you want to have your Eggdrop messages displayed in a language other
62 # than English, change this setting to match your preference. An alternative
63 # would be to set the environment variable EGG_LANG to that value.
64 #
65 # Languages included with Eggdrop: Danish, English, French, Finnish, German.
66 #addlang "english"
67
68
69 ##### LOG FILES #####
70
71 # Eggdrop is capable of logging various things, from channel chatter to
72 # commands people use on the bot and file transfers. Logfiles are normally
73 # kept for 24 hours. Afterwards, they will be renamed to "(logfile).yesterday".
74 # After 48 hours, they will be overwritten by the logfile of the next day.
75 #
76 # Events are logged by certain categories. This way, you can specify
77 # exactly what kind of events you want sent to various logfiles.
78 #
79 # Logfile flags:
80 # b - information about bot linking and userfile sharing
81 # c - commands
82 # d - misc debug information
83 # h - raw share traffic
84 # j - joins, parts, quits, and netsplits on the channel
85 # k - kicks, bans, and mode changes on the channel
86 # m - private msgs, notices and ctcps to the bot
87 # o - misc info, errors, etc (IMPORTANT STUFF)
88 # p - public text on the channel
89 # r - raw incoming server traffic
90 # s - server connects, disconnects, and notices
91 # t - raw botnet traffic
92 # v - raw outgoing server traffic
93 # w - wallops (make sure the bot sets +w in init-server)
94 # x - file transfers and file-area commands
95 #
96 # Note that modes d, h, r, t, and v can fill disk quotas quickly. There are
97 # also eight user-defined levels (1-8) which can be used by Tcl scripts.
98 #
99 # Each logfile belongs to a certain channel. Events of type 'k', 'j', and 'p'
100 # are logged to whatever channel they happened on. Most other events are
101 # currently logged to every channel. You can make a logfile belong to all
102 # channels by assigning it to channel "*".
103
104 # This is the maximum number of logfiles allowed. This setting can be
105 # increased; however, don't decrease it.
106 set max-logs 5
107
108 # This is the maximum size of your logfiles. Set it to 0 to disable.
109 # This value is in kilobytes, so '550' would mean cycle logs when it
110 # reaches the size of 550 kilobytes. Note that this only works if you
111 # have keep-all-logs 0 (OFF).
112 set max-logsize 0
113
114 # This could be good if you have had problem with the logfile filling
115 # your quota/hard disk or if you log +p and publish it to the web and
116 # need more up-to-date info. Note that this setting might increase the
117 # CPU usage of your bot (on the other hand it will decrease your mem usage).
118 set quick-logs 0
119
120 # This setting allows you the logging of raw incoming server traffic via
121 # console/log flag 'r', raw outgoing server traffic via console/log mode 'v',
122 # raw botnet traffic via console/log mode 't', and raw share traffic via
123 # console/log mode 'h'. These flags can create a large security hole,
124 # allowing people to see user passwords. This is now restricted to +n users
125 # only. Please choose your owners with care.
126 set raw-log 0
127
128 # This creates a logfile named eggdrop.log containing private msgs/ctcps,
129 # commands, errors, and misc. info from any channel.
130 logfile mco * "logs/eggdrop.log"
131
132 # This creates a logfile named lamest.log containing joins, parts,
133 # netsplits, kicks, bans, mode changes, and public chat on the
134 # channel #lamest.
135 logfile jpk #lamest "logs/lamest.log"
136
137 # Use this feature to timestamp entries in the log file.
138 set log-time 1
139
140 # If you want to keep your logfiles forever, turn this setting on. All
141 # logfiles will get suffix ".[day, 2 digits][month, 3 letters][year, 4 digits]".
142 # Note that your quota/hard-disk might be filled by this, so check your
143 # logfiles often and download them.
144 set keep-all-logs 0
145
146 # If keep-all-logs is 1, this setting will define the suffix of the logfiles.
147 # The default will result in a suffix like "04May2000". "%Y%m%d" will produce
148 # the often used yyyymmdd format. Read the strftime manpages for more options.
149 # NOTE: On systems which don't support strftime, the default format will
150 # be used _always_.
151 set logfile-suffix ".%d%b%Y"
152
153 # You can specify when Eggdrop should switch logfiles and start fresh. You
154 # must use military time for this setting. 300 is the default, and describes
155 # 03:00 (AM).
156 set switch-logfiles-at 300
157
158 # "Writing user file..." and "Writing channel file..." messages won't be
159 # logged anymore if this option is enabled.
160 set quiet-save 0
161
162
163 ##### CONSOLE #####
164
165 # This is the default console mode. It uses the same event flags as the log
166 # files do. The console channel is automatically set to your "primary" channel,
167 # which is set in the modules section of the config file. Masters can change
168 # their console channel and modes with the '.console' command.
169
170 set console "mkcobxs"
171
172
173 ##### FILES AND DIRECTORIES #####
174
175 # Specify here the filename your userfile should be saved as.
176 set userfile "LamestBot.user"
177
178 # Specify here the filename Eggdrop will save its pid to. If no pidfile is
179 # specified, pid.(botnet-nick) will be used.
180 #set pidfile "pid.LamestBot"
181
182 # If you want your userfile to be sorted upon saving, enable this setting.
183 # This causes the bot to use bit more CPU when saving the usefile.
184 set sort-users 0
185
186 # Specify here where Eggdrop should look for help files. Don't modify this
187 # setting unless you know what you're doing!
188 set help-path "help/"
189
190 # Specify here where Eggdrop should look for text files. This is used for
191 # certain Tcl and DCC commands.
192 set text-path "text/"
193
194 # Set here a place to store temporary files.
195 set temp-path "/tmp"
196
197 # The MOTD (Message Of The day) is displayed when people dcc chat or telnet
198 # to the bot. Look at doc/TEXT-SUBSTITUTIONS for options.
199 set motd "text/motd"
200
201 # This banner will be displayed on telnet connections. Look at
202 # doc/TEXT-SUBSTITUTIONS for options.
203 set telnet-banner "text/banner"
204
205 # This specifies what permissions the user, channel, and notes files should
206 # be set to. The octal values are the same as for the chmod system command.
207 #
208 # To remind you:
209 #
210 # u g o u g o u g o
211 # 0600 rw------- 0400 r-------- 0200 -w------- u - user
212 # 0660 rw-rw---- 0440 r--r----- 0220 -w--w---- g - group
213 # 0666 rw-rw-rw- 0444 r--r--r-- 0222 -w--w--w- o - others
214 #
215 # Note that the default 0600 is the most secure one and should only be changed
216 # if you need your files for shell scripting or other external applications.
217 set userfile-perm 0600
218
219
220 ##### BOTNET/DCC/TELNET #####
221
222 # Settings in this section should be unimportant for you until you deal
223 # with botnets (multiple Eggdrops connected together to maximize efficiency).
224 # You should read doc/BOTNET before modifying these settings.
225
226 # If you want to use a different nickname on the botnet than you use on
227 # IRC (i.e. if you're on an un-trusted botnet), un-comment the next line
228 # and set it to the nick you would like to use.
229 #set botnet-nick "LlamaBot"
230
231 # This opens a telnet port by which you and other bots can interact with the
232 # Eggdrop by telneting in.
233 #
234 # There are more options for the listen command in doc/tcl-commands.doc. Note
235 # that if you are running more than one bot on the same machine, you will want
236 # to space the telnet ports at LEAST 5 apart, although 10 is even better.
237 #
238 # Valid ports are typically anything between 1025 and 65535 assuming the
239 # port is not already in use.
240 #
241 # If you would like the bot to listen for users and bots in separate ports,
242 # use the following format:
243 #
244 # listen 3333 bots
245 # listen 4444 users
246 #
247 # If you wish to use only one port, use this format:
248 #
249 # listen 3333 all
250 #
251 # You need to un-comment this line and change the port number in order to open
252 # the listen port. You should not keep this set to 3333.
253 #listen 3333 all
254
255 # This setting defines whether or not people can boot users on the Eggdrop
256 # from other bots in your botnet. Valid settings are:
257 # 0 - allow *no* outside boots
258 # 1 - allow boots from sharebots
259 # 2 - allow any boots
260 set remote-boots 2
261
262 # This setting prohibits remote bots from telling your Eggdrop to unlink from
263 # share bots.
264 set share-unlinks 1
265
266 # This setting will drop telnet connections not matching a known host.
267 set protect-telnet 0
268
269 # This setting will make the bot ignore DCC chat requests which appear to
270 # have bogus information on the grounds that the user may have been trying
271 # to make the bot connect to somewhere that will get it into trouble, or
272 # that the user has a broken client, in which case the connect wouldn't work
273 # anyway.
274 set dcc-sanitycheck 0
275
276 # This settings defines a time in seconds that the bot should wait before
277 # a dcc chat, telnet, or relay connection times out.
278 set ident-timeout 5
279
280 # Define here whether or not a +o user still needs the +p flag to dcc the bot.
281 set require-p 0
282
283 # If you want people allow to telnet in and type 'NEW' to become a new user,
284 # set this to 1. This is similar to the 'hello' msg command. The protect-telnet
285 # setting must be set to 0 to use this.
286 set open-telnets 0
287
288 # If you don't want Eggdrop to identify itself as an eggdrop on a telnet
289 # connection, set this setting to 1. Eggdrop will display 'Nickname' instead.
290 set stealth-telnets 0
291
292 # If you want Eggdrop to display a banner when telneting in, set this setting
293 # to 1. The telnet banner is set by 'set telnet-banner'.
294 set use-telnet-banner 0
295
296 # This settings defines a time in seconds that the bot should wait before
297 # a dcc chat, telnet, or relay connection times out.
298 set connect-timeout 15
299
300 # Specify here the number of lines to accept from a user on the partyline
301 # within 1 second before they are considered to be flooding and therefore
302 # get booted.
303 set dcc-flood-thr 3
304
305 # Define here how many telnet connection attempts in how many seconds from
306 # the same host constitute a flood. The correct format is Attempts:Seconds.
307 set telnet-flood 5:60
308
309 # If you want telnet-flood to apply even to +f users, set this setting to 1.
310 set paranoid-telnet-flood 1
311
312 # Set here the amount of seconds before giving up on hostname/address
313 # lookup (you might want to increase this if you are on a slow network).
314 set resolve-timeout 15
315
316
317 ##### MORE ADVANCED SETTINGS #####
318
319 # Set this to your socks host if your Eggdrop sits behind a firewall. If
320 # you use a Sun "telnet passthru" firewall, prefix the host with a '!'.
321 #set firewall "!sun-barr.ebay:3666"
322
323 # If you have a NAT firewall (you box has an IP in one of the following
324 # ranges: 192.168.0.0-192.168.255.255, 172.16.0.0-172.31.255.255,
325 # 10.0.0.0-10.255.255.255 and your firewall transparently changes your
326 # address to a unique address for your box) or you have IP masquerading
327 # between you and the rest of the world, and /dcc chat, /ctcp chat or
328 # userfile sharing aren't working, enter your outside IP here. This IP
329 # is used for transfers only, and has nothing to do with the my-ip or
330 # my-hostname settings. You may still need to set my-ip and/or my-hostname.
331 #set nat-ip "127.0.0.1"
332
333 # If you want all dcc file transfers to use a particular portrange either
334 # because you're behind a firewall, or for other security reasons, set it
335 # here.
336 #set reserved-portrange 2010:2020
337
338 # Set the time in minutes that temporary ignores should last.
339 set ignore-time 15
340
341 # Define here what Eggdrop considers 'hourly'. All calls to it, including such
342 # things as note notifying or userfile saving, are affected by this.
343 # For example:
344 #
345 # set hourly-updates 15
346 #
347 # The bot will save its userfile 15 minutes past every hour.
348 set hourly-updates 00
349
350 # Un-comment the next line and set the list of owners of the bot.
351 # You NEED to change this setting.
352 #set owner "MrLame, MrsLame"
353
354 # Who should a note be sent to when new users are learned?
355 set notify-newusers "$owner"
356
357 # Enter the flags that all new users should get by default. See '.help whois'
358 # on the partyline for a list of flags and their descriptions.
359 set default-flags "hp"
360
361 # Enter all user-defined fields that should be displayed in a '.whois'.
362 # This will only be shown if the user has one of these extra fields.
363 # You might prefer to comment this out and use the userinfo1.0.tcl script
364 # which provides commands for changing all of these.
365 set whois-fields "url birthday"
366
367 # Enable this setting if you want your Eggdrop to die upon receiving a SIGHUP
368 # kill signal. Otherwise, the Eggdrop will just save its userfile and rehash.
369 set die-on-sighup 0
370
371 # Enable this setting if you want your Eggdrop to die upon receiving a SIGTERM
372 # kill signal. Otherwise, the Eggdrop will just save its userfile and rehash.
373 set die-on-sigterm 1
374
375 # Comment these two lines if you wish to enable the .tcl and .set commands.
376 # If you select your owners wisely, you should be okay enabling these.
377 unbind dcc n tcl *dcc:tcl
378 unbind dcc n set *dcc:set
379
380 # If you enable this setting, only permanent owners (owner setting) will be
381 # able to use .tcl and .set. Moreover, if you want only let permanent owners
382 # use .dump, then set this to 2.
383 set must-be-owner 1
384
385 # Comment out this line to add the 'simul' partyline command (owners can
386 # manipulate other people on the party line). Please select owners wisely
387 # and use this command ethically!
388 unbind dcc n simul *dcc:simul
389
390 # Set here the maximum number of dcc connections you will allow. You can
391 # increase this later, but never decrease it.
392 set max-dcc 50
393
394 # Enable this setting if you want +d & +k users to use commands bound as -|-.
395 set allow-dk-cmds 1
396
397 # If your Eggdrop rejects bots that actually have already disconnected from
398 # another hub, but the disconnect information has not yet spread over the
399 # botnet due to lag, use this setting. The bot will wait dupwait-timeout
400 # seconds before it checks again and then finally reject the bot.
401 set dupwait-timeout 5
402
403 # You MUST remove this line for your bot to start. This has been added to
404 # prevent you from starting up a bot that is not fully configured. Bots
405 # that have not been fully configured may join the wrong IRC network, the
406 # wrong channels, or generally do things that you do not want. Please make
407 # sure that you have double-checked every setting. There's also a similar line
408 # lower down, just to make sure you're reading :)
409 die "Please make sure you edit your config file completely."
410
411
412 ##### MODULES #####
413
414 # Below are various settings for the modules included with Eggdrop.
415 # PLEASE READ AND EDIT THEM CAREFULLY, even if you're an old hand at
416 # Eggdrop, things change.
417
418 # This path specifies the path were Eggdrop should look for its modules.
419 # If you run the bot from the compilation directory, you will want to set
420 # this to "". If you use 'make install' (like all good kiddies do ;), this
421 # is a fine default. Otherwise, use your head :)
422 set mod-path "modules/"
423
424
425 #### DNS MODULE ####
426
427 # This module provides asynchronous dns support. This will avoid long
428 # periods where the bot just hangs there, waiting for a hostname to
429 # resolve, which will often let it timeout on all other connections.
430 loadmodule dns
431
432
433 #### CHANNELS MODULE ####
434
435 # This module provides channel related support for the bot. Without it,
436 # you won't be able to make the bot join a channel or save channel
437 # specific userfile information.
438 loadmodule channels
439
440 # Enter here the filename where dynamic channel settings are stored.
441 set chanfile "LamestBot.chan"
442
443 # Set this setting to 1 if you want your bot to expire bans/exempts/invites set
444 # by other opped bots on the channel.
445 set force-expire 0
446
447 # Set this setting to 1 if you want your bot to share user greets with other
448 # bots on the channel if sharing user data.
449 set share-greet 0
450
451 # Set this setting to 1 if you want to allow users to store an info line.
452 set use-info 1
453
454 # The following settings are used as default values when you .+chan #chan or .tcl
455 # channel add #chan. Look in the section below for explanation of every option.
456
457 set global-flood-chan 10:60
458 set global-flood-deop 3:10
459 set global-flood-kick 3:10
460 set global-flood-join 5:60
461 set global-flood-ctcp 3:60
462 set global-flood-nick 5:60
463 set global-aop-delay 5:30
464 set global-idle-kick 0
465 set global-chanmode "nt"
466 set global-stopnethack-mode 0
467 set global-revenge-mode 0
468 set global-ban-time 120
469 set global-exempt-time 60
470 set global-invite-time 60
471
472 set global-chanset {
473 -autoop -autovoice
474 -bitch +cycle
475 +dontkickops +dynamicbans
476 +dynamicexempts +dynamicinvites
477 -enforcebans +greet
478 -inactive -nodesynch
479 -protectfriends +protectops
480 -revenge -revengebot
481 -secret -seen
482 +shared +statuslog
483 +userbans +userexempts
484 +userinvites -protecthalfops
485 -autohalfop
486 }
487
488 # Add each static channel you want your bot to sit in using the following
489 # command. There are many different possible settings you can insert into
490 # this command, which are explained below.
491 #
492 # channel add #lamest {
493 # chanmode "+nt-likm"
494 # idle-kick 0
495 # stopnethack-mode 0
496 # revenge-mode 0
497 # ban-time 120
498 # exempt-time 60
499 # invite-time 60
500 # aop-delay 5:30
501 # need-op { putserv "PRIVMSG #lamest :op me cos i'm lame!" }
502 # need-invite { putserv "PRIVMSG #lamest :let me in!" }
503 # need-key { putserv "PRIVMSG #lamest :let me in!" }
504 # need-unban { putserv "PRIVMSG #lamest :let me in!" }
505 # need-limit { putserv "PRIVMSG #lamest :let me in!" }
506 # flood-chan 10:60
507 # flood-deop 3:10
508 # flood-kick 3:10
509 # flood-join 5:60
510 # flood-ctcp 3:60
511 # flood-nick 5:60
512 # }
513 #
514 # chanmode +/-<modes>
515 # This setting makes the bot enforce channel modes. It will always add
516 # the +<modes> and remove the -<modes> modes.
517 #
518 # idle-kick 0
519 # This setting will make the bot check every minute for idle
520 # users. Set this to 0 to disable idle check.
521 #
522 # stopnethack-mode 0
523 # This setting will make the bot de-op anyone who enters the channel
524 # with serverops. There are seven different modes for this settings:
525 # 0 turn off,
526 # 1 isoptest (allow serverop if registered op)
527 # 2 wasoptest (allow serverop if op before split)
528 # 3 allow serverop if isop or wasop
529 # 4 allow serverop if isop and wasop.
530 # 5 If the channel is -bitch, see stopnethack-mode 3
531 # If the channel is +bitch, see stopnethack-mode 1
532 # 6 If the channel is -bitch, see stopnethack-mode 2
533 # If the channel is +bitch, see stopnethack-mode 4
534 #
535 # revenge-mode 0
536 # This settings defines how the bot should punish bad users when
537 # revenging. There are four possible settings:
538 # 0 Deop the user.
539 # 1 Deop the user and give them the +d flag for the channel.
540 # 2 Deop the user, give them the +d flag for the channel, and kick them.
541 # 3 Deop the user, give them the +d flag for the channel, kick, and ban them.
542 #
543 # ban-time 120
544 # Set here how long temporary bans will last (in minutes). If you
545 # set this setting to 0, the bot will never remove them.
546 #
547 # exempt-time 60
548 # Set here how long temporary exempts will last (in minutes). If you
549 # set this setting to 0, the bot will never remove them. The bot will
550 # check the exempts every X minutes, but will not remove the exempt if
551 # a ban is set on the channel that matches that exempt. Once the ban is
552 # removed, then the exempt will be removed the next time the bot checks.
553 # Please note that this is an IRCnet feature.
554 #
555 # invite-time 60
556 # Set here how long temporary invites will last (in minutes). If you
557 # set this setting to 0, the bot will never remove them. The bot will
558 # check the invites every X minutes, but will not remove the invite if
559 # a channel is set to +i. Once the channel is -i then the invite will be
560 # removed the next time the bot checks. Please note that this is an IRCnet
561 # feature.
562 #
563 # aop-delay (minimum:maximum)
564 # This is used for autoop, autohalfop, autovoice. If an op or voice joins a
565 # channel while another op or voice is pending, the bot will attempt to put
566 # both modes on one line.
567 # aop-delay 0 No delay is used.
568 # aop-delay X An X second delay is used.
569 # aop-delay X:Y A random delay between X and Y is used.
570 #
571 # need-op { putserv "PRIVMSG #lamest :op me cos i'm lame!" }
572 # This setting will make the bot run the script enclosed in brackets
573 # if it does not have ops. This must be shorter than 120 characters.
574 # If you use scripts like getops.tcl or botnetop.tcl, you don't need
575 # to set this setting.
576 #
577 # need-invite { putserv "PRIVMSG #lamest :let me in!" }
578 # This setting will make the bot run the script enclosed in brackets
579 # if it needs an invite to the channel. This must be shorter than 120
580 # characters. If you use scripts like getops.tcl or botnetop.tcl, you
581 # don't need to set this setting.
582 #
583 # need-key { putserv "PRIVMSG #lamest :let me in!" }
584 # This setting will make the bot run the script enclosed in brackets
585 # if it needs the key to the channel. This must be shorter than 120
586 # characters. If you use scripts like getops.tcl or botnetop.tcl, you
587 # don't need to set this setting
588 #
589 # need-unban { putserv "PRIVMSG #lamest :let me in!" }
590 # This setting will make the bot run the script enclosed in brackets
591 # if it needs to be unbanned on the channel. This must be shorter than
592 # 120 characters. If you use scripts like getops.tcl or botnetop.tcl,
593 # you don't need to set this setting
594 #
595 # need-limit { putserv "PRIVMSG #lamest :let me in!" }
596 # This setting will make the bot run the script enclosed in brackets
597 # if it needs the limit to be raised on the channel. This must be
598 # shorter than 120 characters. If you use scripts like getops.tcl or
599 # botnetop.tcl, you don't need to set this setting
600 #
601 # flood-chan 10:60
602 # Set here how many channel messages in how many seconds from one
603 # host constitutes a flood. Setting this to 0 or 0:0 disables
604 # flood protection for the channel.
605 #
606 # flood-deop 3:10
607 # Set here how many deops in how many seconds from one host constitutes
608 # a flood. Setting this to 0 or 0:0 disables deop flood protection for
609 # the channel.
610 #
611 # flood-kick 3:10
612 # Set here how many kicks in how many seconds from one host constitutes
613 # a flood. Setting this to 0 or 0:0 disables kick flood protection for
614 # the channel.
615 #
616 # flood-join 5:60
617 # Set here how many joins in how many seconds from one host constitutes
618 # a flood. Setting this to 0 or 0:0 disables join flood protection for
619 # the channel.
620 #
621 # flood-ctcp 3:60
622 # Set here how many channel ctcps in how many seconds from one host
623 # constitutes a flood. Setting this to 0 or 0:0 disables ctcp flood
624 # protection for the channel.
625 #
626 # flood-nick 5:60
627 # Set here how many nick changes in how many seconds from one host
628 # constitutes a flood. Setting this to 0 or 0:0 disables nick flood
629 # protection for the channel.
630 #
631 # There are many different options for channels which you can
632 # define. They can be enabled or disabled using the channel set command by a
633 # plus or minus in front of them.
634 #
635 # channel set #lamest +enforcebans +dynamicbans +userbans +dynamicexempts
636 # channel set #lamest +userexempts +dynamicinvites +userinvites +protectops
637 # channel set #lamest +protectfriends +statuslog +revenge -protecthalfops
638 # channel set #lamest +revengebot +dontkickops +autovoice -autoop -autohalfop
639 # channel set #lamest -bitch -secret -shared +greet +cycle
640 #
641 # A complete list of all available channel settings:
642 #
643 # enforcebans
644 # When a ban is set, kick people who are on the channel and match
645 # the ban?
646 #
647 # dynamicbans
648 # Only activate bans on the channel when necessary? This keeps
649 # the channel's ban list from getting excessively long. The bot
650 # still remembers every ban, but it only activates a ban on the
651 # channel when it sees someone join who matches that ban.
652 #
653 # userbans
654 # Allow bans to be made by users directly? If turned off, the bot
655 # will require all bans to be made through the bot's console.
656 #
657 # dynamicexempts
658 # Only activate exempts on the channel when necessary? This keeps
659 # the channel's exempt list from getting excessively long. The bot
660 # still remembers every exempt, but it only activates a exempt on
661 # the channel when it sees a ban set that matches the exempt. The
662 # exempt remains active on the channel for as long as the ban is
663 # still active.
664 #
665 # userexempts
666 # Allow exempts to be made by users directly? If turned off, the
667 # bot will require all exempts to be made through the bot's console.
668 #
669 # dynamicinvites
670 # Only activate invites on the channel when necessary? This keeps
671 # the channel's invite list from getting excessively long. The bot
672 # still remembers every invite, but the invites are only activated
673 # when the channel is set to invite only and a user joins after
674 # requesting an invite. Once set, the invite remains until the
675 # channel goes to -i.
676 #
677 # userinvites
678 # Allow invites to be made by users directly? If turned off, the
679 # bot will require all invites to be made through the bot's console.
680 #
681 # autoop
682 # Op users with the +o flag as soon as they join the channel?
683 # This is insecure and not recommended.
684 #
685 # autohalfop
686 # Halfop users with the +l flag as soon as they join the channel?
687 # This is insecure and not recommended.
688 #
689 # bitch
690 # Only let users with +o) flag be opped on the channel?
691 #
692 # greet
693 # Say a user's info line when they join the channel?
694 #
695 # protectops
696 # Re-op a user with the +o flag if they get deopped?
697 #
698 # protecthalfops
699 # Re-halfop a user with the +l flag if they get dehalfopped?
700 #
701 # protectfriends
702 # Re-op a user with the +f flag if they get deopped?
703 #
704 # statuslog
705 # Log the channel status line every 5 minutes? This shows the bot's
706 # status on the channel (op, voice, etc.), the channel's modes, and
707 # the number of +m/+o/+v/+n/+b/+e/+I users on the channel. A sample
708 # status line follows:
709 #
710 # [01:40] @#lamest (+istn) : [m/1 o/1 v/4 n/7 b/1 e/5 I/7]
711 #
712 # revenge
713 # Remember people who deop/kick/ban the bot, valid ops, or friends
714 # and punish them? Users with the +f flag are exempt from revenge.
715 #
716 # revengebot
717 # This is similar to to the 'revenge' option, but it only triggers
718 # if a bot gets deopped, kicked or banned.
719 #
720 # autovoice
721 # Voice users with the +v flag when they join the channel?
722 #
723 # secret
724 # Prevent this channel from being listed on the botnet?
725 #
726 # shared
727 # Share channel-related user info for this channel?
728 #
729 # cycle
730 # Cycle the channel when it has no ops?
731 #
732 # dontkickops
733 # Do you want the bot not to be able to kick users who have the +o
734 # flag, letting them kick-flood for instance to protect the channel
735 # against clone attacks.
736 #
737 # inactive
738 # This prevents the bot from joining the channel (or makes it leave
739 # the channel if it is already there). It can be useful to make the
740 # bot leave a channel without losing its settings, channel-specific
741 # user flags, channel bans, and without affecting sharing.
742 #
743 # seen
744 # Respond to seen requests in the channel? The seen module must be
745 # loaded for this to work.
746 #
747 # nodesynch
748 # Allow non-ops to perform channel modes? This can stop the bot from
749 # fighting with services such as ChanServ, or from kicking IRCops when
750 # setting channel modes without having ops.
751 #
752 # Here is a shorter example:
753 #
754 # channel add #botcentral {
755 # chanmode "+mntisl 1"
756 # idle-kick 1
757 # }
758 # channel set #botcentral +bitch +enforcebans -greet +revenge
759
760
761 #### SERVER MODULE ####
762
763 # This module provides the core server support. You have to load this
764 # if you want your bot to come on IRC. Not loading this is equivalent
765 # to the old NO_IRC define.
766 loadmodule server
767
768 # What is your network?
769 # 0 = EFnet
770 # 1 = IRCnet
771 # 2 = Undernet
772 # 3 = DALnet
773 # 4 = +e/+I/max-modes 20 Hybrid
774 # 5 = Others
775 set net-type 0
776
777 # Set the nick the bot uses on IRC, and on the botnet unless you specify a
778 # separate botnet-nick, here.
779 set nick "Lamestbot"
780
781 # Set the alternative nick which the bot uses on IRC if the nick specified
782 # by 'set nick' is unavailable. All '?' characters will be replaced by random
783 # numbers.
784 set altnick "Llamab?t"
785
786 # Set what should be displayed in the real-name field for the bot on IRC.
787 # This can not be blank, it has to contain something.
788 set realname "/msg LamestBot hello"
789
790 # This is a Tcl script to be run immediately after connecting to a server.
791 bind evnt - init-server evnt:init_server
792
793 proc evnt:init_server {type} {
794 global botnick
795 putquick "MODE $botnick +i-ws"
796 }
797
798 # Set the default port which should be used if none is specified with
799 # '.jump' or in 'set servers'.
800 set default-port 6667
801
802 # This is the bot's server list. The bot will start at the first server listed,
803 # and cycle through them whenever it gets disconnected. You need to change these
804 # servers to YOUR network's servers.
805 #
806 # The format is:
807 # server[:port[:password]]
808 #
809 # Both the port and password fields are optional; however, if you want to set a
810 # password you must also set a port. If a port isn't specified it will default to
811 # your default-port setting.
812 set servers {
813 you.need.to.change.this:6667
814 another.example.com:7000:password
815 }
816
817 # This setting makes the bot try to get his original nickname back if its
818 # primary nickname is already in use.
819 set keep-nick 1
820
821 # Set this to 0 if you want the bot to strip '~' characters from user@hosts
822 # before matching them.
823 set strict-host 0
824
825 # This setting makes the bot squelch the error message when rejecting a DCC
826 # CHAT, SEND or message command. Normally, Eggdrop notifies the user that the
827 # command has been rejected because they don't have access. Note that sometimes
828 # IRC server operators detect bots that way.
829 set quiet-reject 1
830
831 # If you want your bot to answer lower case ctcp requests (non rfc-
832 # compliant), set this setting to 1. mIRC will do this, most other
833 # clients will not.
834 set lowercase-ctcp 0
835
836 # Set how many ctcps should be answered at once.
837 set answer-ctcp 3
838
839 # Set here how many msgs in how many seconds from one host constitutes
840 # a flood. If you set this to 0:0, msg flood protection will be disabled.
841 set flood-msg 5:60
842
843 # Set here how many ctcps in how many seconds from one host constitutes
844 # a flood. If you set this to 0:0, ctcp flood protection will be disabled.
845 set flood-ctcp 3:60
846
847 # This settings makes the bot cycle forever through the server list until
848 # it successfully connects to one.
849 set never-give-up 1
850
851 # This setting defines how long Eggdrop should wait before moving from one
852 # server to another on disconnect. If you set 0 here, Eggdrop will not wait
853 # at all and will connect instantly. Setting this too low could result in
854 # your bot being K:Lined.
855 set server-cycle-wait 60
856
857 # Set here how long Eggdrop should wait for a response when connecting to a
858 # server before giving up and moving on to next server.
859 set server-timeout 60
860
861 # If the number of servers on the net gets below this number, the bot
862 # will jump to a new server (it will assume it's on the losing end of
863 # a netsplit). Set this to 0 to turn off. If your bot is running on
864 # any major IRC network, this should probably be turned off.
865 set servlimit 0
866
867 # Set this to 1 if Eggdrop should check for stoned servers? (where the
868 # server connection has died, but Eggdrop hasn't been notified yet).
869 set check-stoned 1
870
871 # If you want your bot to exit the server if it receives an ERROR message,
872 # set this to 1.
873 set serverror-quit 1
874
875 # Set here the maximum number of lines to queue to the server. If you're
876 # going to dump large chunks of text to people over IRC, you will probably
877 # want to raise this. 300 is fine for most people though.
878 set max-queue-msg 300
879
880 # If you want Eggdrop to trigger binds for ignored users, set this to 1.
881 set trigger-on-ignore 0
882
883 # This setting configures PUBM and MSGM binds to be exclusive of PUB and MSG
884 # binds. This means if a MSGM bind with the mask "*help*" exists and is
885 # triggered, any MSG bindings with "help" in their mask will not be
886 # triggered. Don't enable this unless you know what you are doing!
887 set exclusive-binds 0
888
889 # Allow identical messages in the mode queue?
890 set double-mode 1
891
892 # Allow identical messages in the server queue?
893 set double-server 1
894
895 # Allow identical messages in the help queue?
896 set double-help 1
897
898 # This optimizes the kick queue. It also traces nick changes and parts in
899 # the channel and changes the kick queue accordingly. There are three
900 # different options for this setting:
901 # 0 = Turn it off.
902 # 1 = Optimize the kick queue by summarizing kicks.
903 # 2 = Trace nick changes and parts on the channel and change the queue
904 # accordingly. For example, bot will not try to kick users who have
905 # already parted the channel.
906 # ATTENTION: Setting 2 is very CPU intensive.
907 set optimize-kicks 1
908
909 # If your network supports more recipients per command then 1, you can
910 # change this behavior here. Set this to the number of recipients per
911 # command, or set this to 0 for unlimited.
912 set stack-limit 4
913
914 ### SERVER MODULE - OTHER NETWORKS (net-type 5) ###
915
916 # This settings defines how umode +r is understood by Eggdrop. Some networks
917 # use +r to indicate a restricted connection. If this is your case, and you
918 # want your bot to leave restricted servers and jump to the next server on its
919 # list, then set it to 1.
920 #set check-mode-r 1
921
922 # This setting allows you to specify the maximum nick-length supported by your
923 # network. The default setting is 9. The maximum supported length by Eggdrop
924 # is 32.
925 #set nick-len 9
926
927 #### CTCP MODULE ####
928
929 # This module provides the normal ctcp replies that you'd expect.
930 # Without it loaded, CTCP CHAT will not work. The server module
931 # is required for this module to function.
932 loadmodule ctcp
933
934 # Set here how the ctcp module should answer ctcps. There are 3 possible
935 # operating modes:
936 # 0: Normal behavior is used.
937 # 1: The bot ignores all ctcps, except for CHAT and PING requests
938 # by users with the +o flag.
939 # 2: Normal behavior is used, however the bot will not answer more
940 # than X ctcps in Y seconds (defined by 'set flood-ctcp').
941 set ctcp-mode 0
942
943 # There are also several variables to help make your bot less noticeable.
944 # They are: ctcp-version, ctcp-finger, and ctcp-userinfo. You can use set to set
945 # them to values you'd like.
946
947
948 #### IRC MODULE ####
949
950 # This module provides basic IRC support for your bot. You have to
951 # load this if you want your bot to come on IRC. The server and channels
952 # modules must be loaded for this module to function.
953 loadmodule irc
954
955 # Set this to 1 if you want to bounce all server bans.
956 set bounce-bans 1
957
958 # Set this to 1 if you want to bounce all server exemptions (+e modes).
959 # This is disabled if use-exempts is disabled.
960 set bounce-exempts 0
961
962 # Set this to 1 if you want to bounce all server invitations (+I modes).
963 # This is disabled if use-invites is disabled.
964 set bounce-invites 0
965
966 # Set this to 1 if you want to bounce all server modes.
967 set bounce-modes 0
968
969 # Set here the maximum number of bans you want the bot to set on a channel.
970 # Eggdrop will not place any more bans if this limit is reached. Undernet
971 # currently allows 45 bans, IRCnet allows 30, EFnet allows 100, and DALnet
972 # allows 100.
973 set max-bans 30
974
975 # Set here the maximum number of exempts you want Eggdrop to set on a channel.
976 # Eggdrop will not place any more exempts if this limit is reached.
977 set max-exempts 20
978
979 # Set here the maximum number of invites you want Eggdrop to set on a channel.
980 # Eggdrop will not place any more invites if this limit is reached.
981 set max-invites 20
982
983 # There is a global limit for +b/+e/+I modes. This limit should be set to
984 # the same value as max-bans for networks that do not support +e/+I.
985 set max-modes 30
986
987 # The following settings should be left commented unless the default values
988 # are being overridden. By default, exempts and invites are on for EFnet and
989 # IRCnet, but off for all other large networks. This behavior can be modified
990 # with the following 2 flags. If your network doesn't support +e/+I modes then
991 # you will be unable to use these features.
992 #
993 # Do you want to enable exempts (+e modes)?
994 #set use-exempts 0
995
996 # Do you want to enable invites (+I modes)?
997 #set use-invites 0
998
999 # Set this to 1 if you want the bot to kick for control character/ctcp
1000 # avalanches to a channel. Remember that if it does, it won't ban them.
1001 # This can start kick floods.
1002 set kick-fun 0
1003
1004 # Set this to 1 if you want the bot to ban for control character/ctcp
1005 # avalanches to a channel. This can prevent kick floods, but it also can
1006 # fill the banlist.
1007 set ban-fun 0
1008
1009 # If you want people to be able to add themselves to the bot's userlist
1010 # with the default userflags (defined above in the config file) via the
1011 # 'hello' msg command, set this to 1.
1012 set learn-users 0
1013
1014 # Set here the time (in seconds) to wait for someone to return from a netsplit
1015 # (i.e. wasop will expire afterwards). Set this to 1500 on IRCnet since its
1016 # nick delay stops after 30 minutes.
1017 set wait-split 600
1018
1019 # Set here the time (in seconds) that someone must have been off-channel
1020 # before re-displaying their info line.
1021 set wait-info 180
1022
1023 # Set this to the maximum number of bytes to send in the arguments
1024 # of modes sent to the server. Most servers default this to 200.
1025 set mode-buf-length 200
1026
1027 # Many IRCops find bots by seeing if they reply to 'hello' in a msg.
1028 # You can change this to another word by un-commenting the following
1029 # two lines and changing "myword" to the word wish to use instead of
1030 # 'hello'. It must be a single word.
1031 #unbind msg - hello *msg:hello
1032 #bind msg - myword *msg:hello
1033
1034 # Many takeover attempts occur due to lame users blindly /msg ident'ing to
1035 # the bot and attempting to guess passwords. We now unbind this command by
1036 # default to discourage them. You can enable these commands by commenting the
1037 # following two lines.
1038 unbind msg - ident *msg:ident
1039 unbind msg - addhost *msg:addhost
1040
1041 # Some IRC servers are using some non-standard op-like channel prefixes/modes.
1042 # Define them here so the bot can recognize them. Just "@" should be fine for
1043 # most networks. Un-comment the second line for some UnrealIRCds.
1044
1045 set opchars "@"
1046 #set opchars "@&~"
1047
1048 # If you are so lame you want the bot to display peoples info lines, even
1049 # when you are too lazy to add their chanrecs to a channel, set this to 1.
1050 # *NOTE* This means *every* user with an info line will have their info
1051 # line displayed on EVERY channel they join (provided they have been gone
1052 # longer than wait-info).
1053 set no-chanrec-info 0
1054
1055 ### IRC MODULE - IRCnet SPECIFIC FEATURES (net-type 1) ###
1056
1057 # Attention: Use these settings *only* if you set 'net-type' to 1!
1058
1059 # At the moment, the current IRCnet IRCd version (2.10) doesn't support the
1060 # mixing of b, o and v modes with e and I modes. This might be changed in the
1061 # future, so use 1 at the moment for this setting.
1062 set prevent-mixing 1
1063
1064 ### IRC MODULE - OTHER NETWORKS (net-type 5) ###
1065
1066 # Attention: Use these settings *only* if you set 'net-type' to 5!
1067
1068 # If your network supports more users per kick command then 1, you can
1069 # change this behavior here. Set this to the number of users to kick at
1070 # once, or set this to 0 for all at once.
1071 #set kick-method 1
1072
1073 # Some networks allow you to stack lots of channel modes into one line.
1074 # They're all guaranteed to support at least 3, so that's the default.
1075 # If you know your network supports more, you may want to adjust this.
1076 # This setting is limited to 6, although if you want to use a higher value,
1077 # you can modify this by changing the value of MODES_PER_LINE_MAX in
1078 # src/chan.h and recompiling the bot.
1079 #set modes-per-line 3
1080
1081 # Some networks don't include the +l limit and +k or -k key modes
1082 # in the modes-per-line (see above) limitation. Set include-lk to 0 for
1083 # these networks.
1084 #set include-lk 1
1085
1086 # Set this to 1 if your network uses IRCu2.10.01 specific /who requests.
1087 # Eggdrop can, therefore, ask only for exactly what's needed.
1088 #set use-354 0
1089
1090 # If your network doesn't use rfc 1459 compliant string matching routines,
1091 # set this to 0.
1092 #set rfc-compliant 1
1093
1094
1095 #### TRANSFER MODULE ####
1096
1097 # The transfer module provides DCC SEND/GET support and userfile transfer
1098 # support for userfile sharing. Un-comment the next line to load it if you
1099 # need this functionality.
1100 #loadmodule transfer
1101
1102 # Set here the maximum number of simultaneous downloads to allow for
1103 # each user.
1104 set max-dloads 3
1105
1106 # Set here the block size for dcc transfers. ircII uses 512 bytes,
1107 # but admits that it may be too small. 1024 is standard these days.
1108 # 0 is turbo-dcc (recommended).
1109 set dcc-block 0
1110
1111 # Enable this setting if you want to copy files into the /tmp directory
1112 # before sending them. This is useful on most systems for file stability,
1113 # but if your directories are NFS mounted, it's a pain, and you'll want
1114 # to set this to 0. If you are low on disk space, you may also want to
1115 # set this to 0.
1116 set copy-to-tmp 1
1117
1118 # Set here the time (in seconds) to wait before an inactive transfer times out.
1119 set xfer-timeout 30
1120
1121
1122 #### SHARE MODULE ####
1123
1124 # This module provides userfile sharing support between two directly
1125 # linked bots. The transfer and channels modules are required for this
1126 # module to correctly function. Un-comment the following line to load
1127 # the share module.
1128 #loadmodule share
1129
1130 # Settings in this section must be un-commented before setting.
1131
1132 # When two bots get disconnected, this setting allows them to create a
1133 # resync buffer which saves all changes done to the userfile during
1134 # the disconnect. When they reconnect, they will not have to transfer
1135 # the complete user file, but, instead, just send the resync buffer.
1136 #
1137 # NOTE: This has been known to cause loss of channel flags and other
1138 # problems. Using this setting is not recommended.
1139 #set allow-resync 0
1140
1141 # This setting specifies how long to hold another bots resync data
1142 # before flushing it.
1143 #set resync-time 900
1144
1145 # When sharing user lists, DON'T ACCEPT global flag changes from other bots?
1146 # NOTE: The bot will still send changes made on the bot, it just won't accept
1147 # any global flag changes from other bots. This overrides the private-globals
1148 # setting (below).
1149 #set private-global 0
1150
1151 # When sharing user lists, if private-global isn't set, which global flag
1152 # changes from other bots should be ignored?
1153 #set private-globals "mnot"
1154
1155 # When sharing user lists, don't accept ANY userfile changes from other
1156 # bots? Paranoid people should use this feature on their hub bot. This
1157 # will force all userlist changes to be made via the hub.
1158 #set private-user 0
1159
1160 # This setting makes the bot discard its own bot records in favor of
1161 # the ones sent by the hub.
1162 # NOTE: No passwords or botflags are shared, only ports and
1163 # address are added to sharing procedure. This only works with hubs that
1164 # are v1.5.1 or higher.
1165 #set override-bots 0
1166
1167
1168 #### COMPRESS MODULE ####
1169
1170 # This module provides provides support for file compression. This allows the
1171 # bot to transfer compressed user files and therefore save a significant amount
1172 # of bandwidth. The share module must be loaded to load this module. Un-comment
1173 # the following line to the compress module.
1174 #loadmodule compress
1175
1176 # Allow compressed sending of user files? The user files are compressed with
1177 # the compression level defined in `compress-level'.
1178 set share-compressed 1
1179
1180 # This is the default compression level used. These levels are the same as
1181 # those used by GNU gzip.
1182 #set compress-level 9
1183
1184
1185 #### FILESYSTEM MODULE ####
1186
1187 # This module provides an area within the bot where users can store and
1188 # manage files. With this module, the bot is usable as a file server. The
1189 # transfer module is required for this module to function. Un-comment
1190 # the following line to load the filesys module.
1191 #loadmodule filesys
1192
1193 # Set here the 'root' directory for the file system.
1194 set files-path "/home/mydir/filesys"
1195
1196 # If you want to allow uploads, set this to the directory uploads
1197 # should be put into. Set this to "" if you don't want people to
1198 # upload files to your bot.
1199 set incoming-path "/home/mydir/filesys/incoming"
1200
1201 # If you don't want to have a central incoming directory, but instead
1202 # want uploads to go to the current directory that a user is in, set
1203 # this setting to 1.
1204 set upload-to-pwd 0
1205
1206 # Eggdrop creates a '.filedb' file in each subdirectory of your file area
1207 # to keep track of its own file system information. If you can't do that (for
1208 # example, if the dcc path isn't owned by you, or you just don't want it to do
1209 # that) specify a path here where you'd like all of the database files to be
1210 # stored instead.
1211 set filedb-path ""
1212
1213 # Set here the maximum number of people that can be in the file area at once.
1214 # Setting this to 0 makes it effectively infinite.
1215 set max-file-users 20
1216
1217 # Set here the maximum allowable file size that will be received (in KB).
1218 # Setting this to 0 makes it effectively infinite.
1219 set max-filesize 1024
1220
1221
1222 #### NOTES MODULE ####
1223
1224 # This module provides support for storing of notes for users from each other.
1225 # Note sending between currently online users is supported in the core, this is
1226 # only for storing the notes for later retrieval.
1227 loadmodule notes
1228
1229 # Set here the filename where private notes between users are stored.
1230 set notefile "LamestBot.notes"
1231
1232 # Set here the maximum number of notes to allow to be stored for each user
1233 # (to prevent flooding).
1234 set max-notes 50
1235
1236 # Set here how long (in days) to store notes before expiring them.
1237 set note-life 60
1238
1239 # Set this to 1 if you want to allow users to specify a forwarding address
1240 # for forwarding notes to another account on another bot.
1241 set allow-fwd 0
1242
1243 # Set this to 1 if you want the bot to let people know hourly if they have
1244 # any notes.
1245 set notify-users 1
1246
1247 # Set this to 1 if you want the bot to let people know on join if they have
1248 # any notes.
1249 set notify-onjoin 1
1250
1251 # Comment out this next line. Otherwise, your bot won't start.
1252 die "You didn't edit your config file completely like you were told, did you?"
1253
1254
1255 #### CONSOLE MODULE ####
1256
1257 # This module provides storage of console settings when you exit the
1258 # bot or type .store on the partyline.
1259 loadmodule console
1260
1261 # Save users console settings automatically? Otherwise, they have
1262 # to use the .store command.
1263 set console-autosave 1
1264
1265 # If a user doesn't have any console settings saved, which channel
1266 # do you want them automatically put on?
1267 set force-channel 0
1268
1269 # Enable this setting if a user's global info line should be displayed
1270 # when they join a botnet channel.
1271 set info-party 0
1272
1273
1274 #### WOOBIE MODULE ####
1275
1276 # This is for demonstrative purposes only. If you are looking for starting
1277 # point in writing modules, woobie is the right thing.
1278 #loadmodule woobie
1279
1280
1281 #### SEEN MODULE ####
1282
1283 # This module provides very basic seen commands via msg, on channel or via dcc.
1284 # This module works only for users in the bot's userlist. If you are looking for
1285 # a better and more advanced seen module, try the gseen module by G'Quann. You
1286 # can find it at http://www.visions-of-fantasy.de/gseen.mod/.
1287 #loadmodule seen
1288
1289
1290 #### BLOWFISH MODULE ####
1291
1292 # IF YOU DON'T READ THIS YOU MAY RENDER YOUR USERFILE USELESS LATER
1293 # Eggdrop encrypts its userfile, so users can have secure passwords.
1294 # Please note that when you change your encryption method later (i.e.
1295 # using other modules like a md5 module), you can't use your current
1296 # userfile anymore. Eggdrop will not start without an encryption module.
1297 #loadmodule blowfish
1298
1299
1300 #### ASSOC MODULE ####
1301
1302 # This module provides assoc support, i.e. naming channels on the botnet.
1303 # You can load it by un-commenting the following line.
1304 #loadmodule assoc
1305
1306
1307 #### WIRE MODULE ####
1308
1309 # This module provides all the standard .wire commands via dcc. It is an
1310 # encrypted partyline communication tool, compatible with wire.tcl. An
1311 # encryption module must be loaded to use this module. Un-comment the
1312 # following line to load the wire module.
1313 #loadmodule wire
1314
1315 #### UPTIME MODULE ####
1316
1317 # This module reports uptime statistics to http://uptime.eggheads.org.
1318 # Go look and see what your uptime is! It takes about 9 hours to show up,
1319 # so if your bot isn't listed, try again later. The server module must be
1320 # loaded for this module to function.
1321 #
1322 # Information sent to the server includes the bot's uptime, botnet-nick,
1323 # server, version, and IP address. This information is stored in a temporary
1324 # logfile for debugging purposes only. The only publicly available information
1325 # will be the bot's botnet-nick, version and uptime. If you do not wish for this
1326 # information to be sent, comment out the following line.
1327 loadmodule uptime
1328
1329 ##### SCRIPTS #####
1330
1331 # This is a good place to load scripts to use with your bot.
1332
1333 # This line loads script.tcl from the scripts directory inside your Eggdrop's
1334 # directory. All scripts should be put there, although you can place them where
1335 # you like as long as you can supply a fully qualified path to them.
1336 #
1337 # source scripts/script.tcl
1338
1339 source scripts/alltools.tcl
1340 source scripts/action.fix.tcl
1341
1342 # Use this script for Tcl and Eggdrop backwards compatibility.
1343 # NOTE: This can also cause problems with some newer scripts.
1344 #source scripts/compat.tcl
1345
1346 # This script provides many useful informational functions, like setting
1347 # users' URLs, e-mail address, ICQ numbers, etc. You can modify it to add
1348 # extra entries.
1349 source scripts/userinfo.tcl
1350 loadhelp userinfo.help
1351
1352 # Some servers on the Undernet will make you send 'PASS <numbers>' before you
1353 # can connect if you did not return an identd response. This script will
1354 # handle sending that for you.
1355
1356 if {[info exists net-type] && ${net-type} == 2} {
1357 source scripts/quotepass.tcl
1358 }
1359

webmaster@eggheads.org
ViewVC Help
Powered by ViewVC 1.1.23