/[cvs]/eggdrop1.6/eggdrop.conf
ViewVC logotype

Contents of /eggdrop1.6/eggdrop.conf

Parent Directory Parent Directory | Revision Log Revision Log | View Revision Graph Revision Graph


Revision 1.35 - (show annotations) (download)
Thu May 27 04:18:38 2004 UTC (14 years, 10 months ago) by wcc
Branch: MAIN
Changes since 1.34: +3 -3 lines
* More help/docs.

1 #! /path/to/executable/eggdrop
2 # ^- This should contain a fully qualified path to your Eggdrop executable.
3 #
4 # $Id: eggdrop.conf,v 1.34 2004/04/05 23:35:19 wcc Exp $
5 #
6 # This is a sample Eggdrop configuration file which includes all possible
7 # settings that can be used to configure your bot.
8 #
9 # The pound signs (#) that you see at the beginning of some lines mean that
10 # the remainder of that line is a comment, or just for your information. By
11 # adding or deleting pound signs, you can comment or uncomment a setting,
12 # respectively.
13 #
14 # Arguments for a command or setting may be inclosed in <>'s or []'s in the
15 # example/description. Arguments in <>'s are required, while [] means optional.
16 #
17 # More detailed descriptions of all these settings can be found in
18 # doc/settings/.
19
20
21
22 ##### BASIC SETTINGS #####
23
24 # This setting defines the username the bot uses on IRC. This setting has
25 # no effect if an ident daemon is running on your bot's machine.
26 set username "lamest"
27
28 # This setting defines which contact person should be shown in .status,
29 # /msg help, and other places. You really should include this information.
30 set admin "Lamer <email: lamer@lamest.lame.org>"
31
32 # This setting is used only for info to share with others on your botnet.
33 # Set this to the IRC network your bot is connected to.
34 set network "I.didn't.edit.my.config.file.net"
35
36 # This setting defines the timezone is your bot in. It's used for internal
37 # routines as well as for logfile timestamping and scripting purposes.
38 # The timezone string specifies the name of the timezone and must be three
39 # or more alphabetic characters. For example, Central European Time(UTC+1)
40 # should be "CET".
41 set timezone "EST"
42
43 # The offset setting specifies the time value to be added to the local
44 # time to get Coordinated Universal Time (UTC aka GMT). The offset is
45 # positive if the local timezone is west of the Prime Meridian and
46 # negative if it is east. The value (in hours) must be between -23 and
47 # 23. For example, if the timezone is UTC+1, the offset is -1.
48 set offset "5"
49
50 # If you don't want to use the timezone setting for scripting purposes only,
51 # but instead everywhere possible, un-comment the following line.
52 #set env(TZ) "$timezone $offset"
53
54 # If you're using virtual hosting (your machine has more than 1 IP), you
55 # may want to specify the particular IP to bind to. You can specify either
56 # by hostname or by IP. You may also want to set the hostname here if
57 # Eggdrop has trouble detecting it when it starts up.
58 #set my-hostname "virtual.host.com"
59 #set my-ip "99.99.0.0"
60
61 # If you want to have your Eggdrop messages displayed in a language other
62 # than English, change this setting to match your preference. An alternative
63 # would be to set the environment variable EGG_LANG to that value.
64 #addlang "english"
65
66
67 ##### LOG FILES #####
68
69 # Eggdrop is capable of logging various things, from channel chatter to
70 # commands people use on the bot and file transfers. Logfiles are normally
71 # kept for 24 hours. Afterwards, they will be renamed to "(logfile).yesterday".
72 # After 48 hours, they will be overwritten by the logfile of the next day.
73 #
74 # Events are logged by certain categories. This way, you can specify
75 # exactly what kind of events you want sent to various logfiles.
76 #
77 # Logfile flags:
78 # b - information about bot linking and userfile sharing
79 # c - commands
80 # d - misc debug information
81 # h - raw share traffic
82 # j - joins, parts, quits, and netsplits on the channel
83 # k - kicks, bans, and mode changes on the channel
84 # m - private msgs, notices and ctcps to the bot
85 # o - misc info, errors, etc (IMPORTANT STUFF)
86 # p - public text on the channel
87 # r - raw incoming server traffic
88 # s - server connects, disconnects, and notices
89 # t - raw botnet traffic
90 # v - raw outgoing server traffic
91 # w - wallops (make sure the bot sets +w in init-server)
92 # x - file transfers and file-area commands
93 #
94 # Note that modes d, h, r, t, and v can fill disk quotas quickly. There are
95 # also eight user-defined levels (1-8) which can be used by Tcl scripts.
96 #
97 # Each logfile belongs to a certain channel. Events of type 'k', 'j', and 'p'
98 # are logged to whatever channel they happened on. Most other events are
99 # currently logged to every channel. You can make a logfile belong to all
100 # channels by assigning it to channel "*".
101
102 # This is the maximum number of logfiles allowed. This setting can be
103 # increased; however, don't decrease it.
104 set max-logs 5
105
106 # This is the maximum size of your logfiles. Set it to 0 to disable.
107 # This value is in kilobytes, so '550' would mean cycle logs when it
108 # reaches the size of 550 kilobytes. Note that this only works if you
109 # have keep-all-logs 0 (OFF).
110 set max-logsize 0
111
112 # This could be good if you have had problem with the logfile filling
113 # your quota/hard disk or if you log +p and publish it to the web and
114 # need more up-to-date info. Note that this setting might increase the
115 # CPU usage of your bot (on the other hand it will decrease your mem usage).
116 set quick-logs 0
117
118 # This setting allows you the logging of raw incoming server traffic via
119 # console/log flag 'r', raw outgoing server traffic via console/log mode 'v',
120 # raw botnet traffic via console/log mode 't', and raw share traffic via
121 # console/log mode 'h'. These flags can create a large security hole,
122 # allowing people to see user passwords. This is now restricted to +n users
123 # only. Please choose your owners with care.
124 set raw-log 0
125
126 # This creates a logfile named eggdrop.log containing private msgs/ctcps,
127 # commands, errors, and misc. info from any channel.
128 logfile mco * "logs/eggdrop.log"
129
130 # This creates a logfile named lamest.log containing joins, parts,
131 # netsplits, kicks, bans, mode changes, and public chat on the
132 # channel #lamest.
133 logfile jpk #lamest "logs/lamest.log"
134
135 # Use this feature to timestamp entries in the log file.
136 set log-time 1
137
138 # If you want to keep your logfiles forever, turn this setting on. All
139 # logfiles will get suffix ".[day, 2 digits][month, 3 letters][year, 4 digits]".
140 # Note that your quota/hard-disk might be filled by this, so check your
141 # logfiles often and download them.
142 set keep-all-logs 0
143
144 # If keep-all-logs is 1, this setting will define the suffix of the logfiles.
145 # The default will result in a suffix like "04May2000". "%Y%m%d" will produce
146 # the often used yyyymmdd format. Read the strftime manpages for more options.
147 # NOTE: On systems which don't support strftime, the default format will
148 # be used _always_.
149 set logfile-suffix ".%d%b%Y"
150
151 # You can specify when Eggdrop should switch logfiles and start fresh. You
152 # must use military time for this setting. 300 is the default, and describes
153 # 03:00 (AM).
154 set switch-logfiles-at 300
155
156 # "Writing user file..." and "Writing channel file..." messages won't be
157 # logged anymore if this option is enabled.
158 set quiet-save 0
159
160
161 ##### CONSOLE #####
162
163 # This is the default console mode. It uses the same event flags as the log
164 # files do. The console channel is automatically set to your "primary" channel,
165 # which is set in the modules section of the config file. Masters can change
166 # their console channel and modes with the '.console' command.
167
168 set console "mkcobxs"
169
170
171 ##### FILES AND DIRECTORIES #####
172
173 # Specify here the filename your userfile should be saved as.
174 set userfile "LamestBot.user"
175
176 # Specify here the filename Eggdrop will save its pid to. If no pidfile is
177 # specified, pid.(botnet-nick) will be used.
178 #set pidfile "pid.LamestBot"
179
180 # If you want your userfile to be sorted upon saving, enable this setting.
181 # This causes the bot to use bit more CPU when saving the usefile.
182 set sort-users 0
183
184 # Specify here where Eggdrop should look for help files. Don't modify this
185 # setting unless you know what you're doing!
186 set help-path "help/"
187
188 # Specify here where Eggdrop should look for text files. This is used for
189 # certain Tcl and DCC commands.
190 set text-path "text/"
191
192 # Set here a place to store temporary files.
193 set temp-path "/tmp"
194
195 # The MOTD (Message Of The day) is displayed when people dcc chat or telnet
196 # to the bot. Look at doc/TEXT-SUBSTITUTIONS for options.
197 set motd "text/motd"
198
199 # This banner will be displayed on telnet connections. Look at
200 # doc/TEXT-SUBSTITUTIONS for options.
201 set telnet-banner "text/banner"
202
203 # This specifies what permissions the user, channel, and notes files should
204 # be set to. The octal values are the same as for the chmod system command.
205 #
206 # To remind you:
207 #
208 # u g o u g o u g o
209 # 0600 rw------- 0400 r-------- 0200 -w------- u - user
210 # 0660 rw-rw---- 0440 r--r----- 0220 -w--w---- g - group
211 # 0666 rw-rw-rw- 0444 r--r--r-- 0222 -w--w--w- o - others
212 #
213 # Note that the default 0600 is the most secure one and should only be changed
214 # if you need your files for shell scripting or other external applications.
215 set userfile-perm 0600
216
217
218 ##### BOTNET/DCC/TELNET #####
219
220 # Settings in this section should be unimportant for you until you deal
221 # with botnets (multiple Eggdrops connected together to maximize efficiency).
222 # You should read doc/BOTNET before modifying these settings.
223
224 # If you want to use a different nickname on the botnet than you use on
225 # IRC (i.e. if you're on an un-trusted botnet), un-comment the next line
226 # and set it to the nick you would like to use.
227 #set botnet-nick "LlamaBot"
228
229 # This opens a telnet port by which you and other bots can interact with the
230 # Eggdrop by telneting in.
231 #
232 # There are more options for the listen command in doc/tcl-commands.doc. Note
233 # that if you are running more than one bot on the same machine, you will want
234 # to space the telnet ports at LEAST 5 apart, although 10 is even better.
235 #
236 # Valid ports are typically anything between 1025 and 65535 assuming the
237 # port is not already in use.
238 #
239 # If you would like the bot to listen for users and bots in separate ports,
240 # use the following format:
241 #
242 # listen 3333 bots
243 # listen 4444 users
244 #
245 # If you wish to use only one port, use this format:
246 #
247 # listen 3333 all
248 #
249 # You need to un-comment this line and change the port number in order to open
250 # the listen port. You should not keep this set to 3333.
251 #listen 3333 all
252
253 # This setting defines whether or not people can boot users on the Eggdrop
254 # from other bots in your botnet. Valid settings are:
255 # 0 - allow *no* outside boots
256 # 1 - allow boots from sharebots
257 # 2 - allow any boots
258 set remote-boots 2
259
260 # This setting prohibits remote bots from telling your Eggdrop to unlink from
261 # share bots.
262 set share-unlinks 1
263
264 # This setting will drop telnet connections not matching a known host. It
265 # greatly improves protection from IRCops, but makes it impossible to add
266 # hosts on limbo (NOIRC) bots or have NEW as a valid login.
267 set protect-telnet 0
268
269 # This setting will make the bot ignore DCC chat requests which appear to
270 # have bogus information on the grounds that the user may have been trying
271 # to make the bot connect to somewhere that will get it into trouble, or
272 # that the user has a broken client (like mIRC tends to do), in which case
273 # the connect wouldn't work anyway. It's suggested that you turn this on.
274 set dcc-sanitycheck 0
275
276 # This settings defines a time in seconds that the bot should wait before
277 # a dcc chat, telnet, or relay connection times out.
278 set ident-timeout 5
279
280 # Define here whether or not a +o user still needs the +p flag to dcc the bot.
281 set require-p 0
282
283 # If you want people allow to telnet in and type 'NEW' to become a new user,
284 # set this to 1. This is similar to the 'hello' msg command. The protect-telnet
285 # setting must be set to 0 to use this.
286 set open-telnets 0
287
288 # If you don't want Eggdrop to identify itself as an eggdrop on a telnet
289 # connection, set this setting to 1. Eggdrop will display 'Nickname' instead.
290 set stealth-telnets 0
291
292 # If you want Eggdrop to display a banner when telneting in, set this setting
293 # to 1. The telnet banner is set by 'set telnet-banner'.
294 set use-telnet-banner 0
295
296 # This settings defines a time in seconds that the bot should wait before
297 # a dcc chat, telnet, or relay connection times out.
298 set connect-timeout 15
299
300 # Specify here the number of lines to accept from a user on the partyline
301 # within 1 second before they are considered to be flooding and therefore
302 # get booted.
303 set dcc-flood-thr 3
304
305 # Define here how many telnet connection attempts in how many seconds from
306 # the same host constitute a flood. The correct format is Attempts:Seconds.
307 set telnet-flood 5:60
308
309 # If you want telnet-flood to apply even to +f users, set this setting to 1.
310 set paranoid-telnet-flood 1
311
312 # Set here the amount of seconds before giving up on hostname/address
313 # lookup (you might want to increase this if you are on a slow network).
314 set resolve-timeout 15
315
316
317 ##### MORE ADVANCED SETTINGS #####
318
319 # Set this to your socks host if your Eggdrop sits behind a firewall. If
320 # you use a Sun "telnet passthru" firewall, prefix the host with a '!'.
321 #set firewall "!sun-barr.ebay:3666"
322
323 # If you have a NAT firewall (you box has an IP in one of the following
324 # ranges: 192.168.0.0-192.168.255.255, 172.16.0.0-172.31.255.255,
325 # 10.0.0.0-10.255.255.255 and your firewall transparently changes your
326 # address to a unique address for your box) or you have IP masquerading
327 # between you and the rest of the world, and /dcc chat, /ctcp chat or
328 # userfile sharing aren't working, enter your outside IP here. Do not
329 # enter anything for my-ip or my-hostname if you use this setting.
330 #set nat-ip "127.0.0.1"
331
332 # If you want all dcc file transfers to use a particular portrange either
333 # because you're behind a firewall, or for other security reasons, set it
334 # here.
335 #set reserved-portrange 2010:2020
336
337 # Set the time in minutes that temporary ignores should last.
338 set ignore-time 15
339
340 # Define here what Eggdrop considers 'hourly'. All calls to it, including such
341 # things as note notifying or userfile saving, are affected by this.
342 # For example:
343 #
344 # set hourly-updates 15
345 #
346 # The bot will save its userfile 15 minutes past every hour.
347 set hourly-updates 00
348
349 # Un-comment the next line and set the list of owners of the bot.
350 # You NEED to change this setting.
351 #set owner "MrLame, MrsLame"
352
353 # Who should a note be sent to when new users are learned?
354 set notify-newusers "$owner"
355
356 # Enter the flags that all new users should get by default. See '.help whois'
357 # on the partyline for a list of flags and their descriptions.
358 set default-flags "hp"
359
360 # Enter all user-defined fields that should be displayed in a '.whois'.
361 # This will only be shown if the user has one of these extra fields.
362 # You might prefer to comment this out and use the userinfo1.0.tcl script
363 # which provides commands for changing all of these.
364 set whois-fields "url birthday"
365
366 # Enable this setting if you want your Eggdrop to die upon receiving a SIGHUP
367 # kill signal. Otherwise, the Eggdrop will just save its userfile and rehash.
368 set die-on-sighup 0
369
370 # Enable this setting if you want your Eggdrop to die upon receiving a SIGTERM
371 # kill signal. Otherwise, the Eggdrop will just save its userfile and rehash.
372 set die-on-sigterm 1
373
374 # Comment these two lines if you wish to enable the .tcl and .set commands.
375 # If you select your owners wisely, you should be okay enabling these.
376 unbind dcc n tcl *dcc:tcl
377 unbind dcc n set *dcc:set
378
379 # If you enable this setting, only permanent owners (owner setting) will be
380 # able to use .tcl and .set. Moreover, if you want only let permanent owners
381 # use .dump, then set this to 2.
382 set must-be-owner 1
383
384 # Comment out this line to add the 'simul' partyline command (owners can
385 # manipulate other people on the party line). Please select owners wisely
386 # and use this command ethically!
387 unbind dcc n simul *dcc:simul
388
389 # Set here the maximum number of dcc connections you will allow. You can
390 # increase this later, but never decrease it.
391 set max-dcc 50
392
393 # Enable this setting if you want +d & +k users to use commands bound as -|-.
394 set allow-dk-cmds 1
395
396 # If your Eggdrop rejects bots that actually have already disconnected from
397 # another hub, but the disconnect information has not yet spread over the
398 # botnet due to lag, use this setting. The bot will wait dupwait-timeout
399 # seconds before it checks again and then finally reject the bot.
400 set dupwait-timeout 5
401
402 # You MUST remove this line for your bot to start. This has been added to
403 # prevent you from starting up a bot that is not fully configured. Bots
404 # that have not been fully configured may join the wrong IRC network, the
405 # wrong channels, or generally do things that you do not want. Please make
406 # sure that you have double-checked every setting. There's also a similar line
407 # lower down, just to make sure you're reading :)
408 die "Please make sure you edit your config file completely."
409
410
411 ##### MODULES #####
412
413 # Below are various settings for the modules included with Eggdrop.
414 # PLEASE READ AND EDIT THEM CAREFULLY, even if you're an old hand at
415 # Eggdrop, things change.
416
417 # This path specifies the path were Eggdrop should look for its modules.
418 # If you run the bot from the compilation directory, you will want to set
419 # this to "". If you use 'make install' (like all good kiddies do ;), this
420 # is a fine default. Otherwise, use your head :)
421 set mod-path "modules/"
422
423
424 #### DNS MODULE ####
425
426 # This module provides asynchronous dns support. This will avoid long
427 # periods where the bot just hangs there, waiting for a hostname to
428 # resolve, which will often let it timeout on all other connections.
429 loadmodule dns
430
431
432 #### CHANNELS MODULE ####
433
434 # This module provides channel related support for the bot. Without it,
435 # you won't be able to make the bot join a channel or save channel
436 # specific userfile information.
437 loadmodule channels
438
439 # Enter here the filename where dynamic channel settings are stored.
440 set chanfile "LamestBot.chan"
441
442 # Set this setting to 1 if you want your bot to expire bans/exempts/invites set
443 # by other opped bots on the channel.
444 set force-expire 0
445
446 # Set this setting to 1 if you want your bot to share user greets with other
447 # bots on the channel if sharing user data.
448 set share-greet 0
449
450 # Set this setting to 1 if you want to allow users to store an info line.
451 set use-info 1
452
453 # The following settings are used as default values when you .+chan #chan or .tcl
454 # channel add #chan. Look in the section below for explanation of every option.
455
456 set global-flood-chan 10:60
457 set global-flood-deop 3:10
458 set global-flood-kick 3:10
459 set global-flood-join 5:60
460 set global-flood-ctcp 3:60
461 set global-flood-nick 5:60
462 set global-aop-delay 5:30
463 set global-idle-kick 0
464 set global-chanmode "nt"
465 set global-stopnethack-mode 0
466 set global-revenge-mode 0
467 set global-ban-time 120
468 set global-exempt-time 60
469 set global-invite-time 60
470
471 set global-chanset {
472 -autoop -autovoice
473 -bitch +cycle
474 +dontkickops +dynamicbans
475 +dynamicexempts +dynamicinvites
476 -enforcebans +greet
477 -inactive -nodesynch
478 -protectfriends +protectops
479 -revenge -revengebot
480 -secret -seen
481 +shared +statuslog
482 +userbans +userexempts
483 +userinvites -protecthalfops
484 -autohalfop
485 }
486
487 # Add each static channel you want your bot to sit in using the following
488 # command. There are many different possible settings you can insert into
489 # this command, which are explained below.
490 #
491 # channel add #lamest {
492 # chanmode "+nt-likm"
493 # idle-kick 0
494 # stopnethack-mode 0
495 # revenge-mode 0
496 # ban-time 120
497 # exempt-time 60
498 # invite-time 60
499 # aop-delay 5:30
500 # need-op { putserv "PRIVMSG #lamest :op me cos i'm lame!" }
501 # need-invite { putserv "PRIVMSG #lamest :let me in!" }
502 # need-key { putserv "PRIVMSG #lamest :let me in!" }
503 # need-unban { putserv "PRIVMSG #lamest :let me in!" }
504 # need-limit { putserv "PRIVMSG #lamest :let me in!" }
505 # flood-chan 10:60
506 # flood-deop 3:10
507 # flood-kick 3:10
508 # flood-join 5:60
509 # flood-ctcp 3:60
510 # flood-nick 5:60
511 # }
512 #
513 # chanmode +/-<modes>
514 # This setting makes the bot enforce channel modes. It will always add
515 # the +<modes> and remove the -<modes> modes.
516 # idle-kick 0
517 # This setting will make the bot check every minute for idle
518 # users. Set this to 0 to disable idle check.
519 #
520 # stopnethack-mode 0
521 # This setting will make the bot de-op anyone who enters the channel
522 # with serverops. There are seven different modes for this settings:
523 # 0 turn off,
524 # 1 isoptest (allow serverop if registered op)
525 # 2 wasoptest (allow serverop if op before split)
526 # 3 allow serverop if isop or wasop
527 # 4 allow serverop if isop and wasop.
528 # 5 If the channel is -bitch, see stopnethack-mode 3
529 # If the channel is +bitch, see stopnethack-mode 1
530 # 6 If the channel is -bitch, see stopnethack-mode 2
531 # If the channel is +bitch, see stopnethack-mode 4
532 #
533 # revenge-mode 0
534 # This settings defines how the bot should punish bad users when
535 # revenging. There are four possible settings:
536 # 0 Deop the user.
537 # 1 Deop the user and give them the +d flag for the channel.
538 # 2 Deop the user, give them the +d flag for the channel, and kick them.
539 # 3 Deop the user, give them the +d flag for the channel, kick, and ban them.
540 #
541 # ban-time 120
542 # Set here how long temporary bans will last (in minutes). If you
543 # set this setting to 0, the bot will never remove them.
544 #
545 # exempt-time 60
546 # Set here how long temporary exempts will last (in minutes). If you
547 # set this setting to 0, the bot will never remove them. The bot will
548 # check the exempts every X minutes, but will not remove the exempt if
549 # a ban is set on the channel that matches that exempt. Once the ban is
550 # removed, then the exempt will be removed the next time the bot checks.
551 # Please note that this is an IRCnet feature.
552 #
553 # invite-time 60
554 # Set here how long temporary invites will last (in minutes). If you
555 # set this setting to 0, the bot will never remove them. The bot will
556 # check the invites every X minutes, but will not remove the invite if
557 # a channel is set to +i. Once the channel is -i then the invite will be
558 # removed the next time the bot checks. Please note that this is an IRCnet
559 # feature.
560 #
561 # aop-delay (minimum:maximum)
562 # This is used for autoop, autohalfop, autovoice. If an op or voice joins a
563 # channel while another op or voice is pending, the bot will attempt to put
564 # both modes on one line.
565 # aop-delay 0 No delay is used.
566 # aop-delay X An X second delay is used.
567 # aop-delay X:Y A random delay between X and Y is used.
568 #
569 # need-op { putserv "PRIVMSG #lamest :op me cos i'm lame!" }
570 # This setting will make the bot run the script enclosed in brackets
571 # if it does not have ops. This must be shorter than 120 characters.
572 # If you use scripts like getops.tcl or botnetop.tcl, you don't need
573 # to set this setting.
574 #
575 # need-invite { putserv "PRIVMSG #lamest :let me in!" }
576 # This setting will make the bot run the script enclosed in brackets
577 # if it needs an invite to the channel. This must be shorter than 120
578 # characters. If you use scripts like getops.tcl or botnetop.tcl, you
579 # don't need to set this setting.
580 #
581 # need-key { putserv "PRIVMSG #lamest :let me in!" }
582 # This setting will make the bot run the script enclosed in brackets
583 # if it needs the key to the channel. This must be shorter than 120
584 # characters. If you use scripts like getops.tcl or botnetop.tcl, you
585 # don't need to set this setting
586 #
587 # need-unban { putserv "PRIVMSG #lamest :let me in!" }
588 # This setting will make the bot run the script enclosed in brackets
589 # if it needs to be unbanned on the channel. This must be shorter than
590 # 120 characters. If you use scripts like getops.tcl or botnetop.tcl,
591 # you don't need to set this setting
592 #
593 # need-limit { putserv "PRIVMSG #lamest :let me in!" }
594 # This setting will make the bot run the script enclosed in brackets
595 # if it needs the limit to be raised on the channel. This must be
596 # shorter than 120 characters. If you use scripts like getops.tcl or
597 # botnetop.tcl, you don't need to set this setting
598 #
599 # flood-chan 10:60
600 # Set here how many channel messages in how many seconds from one
601 # host constitutes a flood. Setting this to 0 or 0:0 disables
602 # flood protection for the channel.
603 #
604 # flood-deop 3:10
605 # Set here how many deops in how many seconds from one host constitutes
606 # a flood. Setting this to 0 or 0:0 disables deop flood protection for
607 # the channel.
608 #
609 # flood-kick 3:10
610 # Set here how many kicks in how many seconds from one host constitutes
611 # a flood. Setting this to 0 or 0:0 disables kick flood protection for
612 # the channel.
613 #
614 # flood-join 5:60
615 # Set here how many joins in how many seconds from one host constitutes
616 # a flood. Setting this to 0 or 0:0 disables join flood protection for
617 # the channel.
618 #
619 # flood-ctcp 3:60
620 # Set here how many channel ctcps in how many seconds from one host
621 # constitutes a flood. Setting this to 0 or 0:0 disables ctcp flood
622 # protection for the channel.
623 #
624 # flood-nick 5:60
625 # Set here how many nick changes in how many seconds from one host
626 # constitutes a flood. Setting this to 0 or 0:0 disables nick flood
627 # protection for the channel.
628 #
629 # There are many different options for channels which you can
630 # define. They can be enabled or disabled using the channel set command by a
631 # plus or minus in front of them.
632 #
633 # channel set #lamest +enforcebans +dynamicbans +userbans +dynamicexempts
634 # channel set #lamest +userexempts +dynamicinvites +userinvites +protectops
635 # channel set #lamest +protectfriends +statuslog +revenge -protecthalfops
636 # channel set #lamest +revengebot +dontkickops +autovoice -autoop -autohalfop
637 # channel set #lamest -bitch -secret -shared +greet +cycle
638 #
639 # A complete list of all available channel settings:
640 #
641 # enforcebans
642 # When a ban is set, kick people who are on the channel and match
643 # the ban?
644 #
645 # dynamicbans
646 # Only activate bans on the channel when necessary? This keeps
647 # the channel's ban list from getting excessively long. The bot
648 # still remembers every ban, but it only activates a ban on the
649 # channel when it sees someone join who matches that ban.
650 #
651 # userbans
652 # Allow bans to be made by users directly? If turned off, the bot
653 # will require all bans to be made through the bot's console.
654 #
655 # dynamicexempts
656 # Only activate exempts on the channel when necessary? This keeps
657 # the channel's exempt list from getting excessively long. The bot
658 # still remembers every exempt, but it only activates a exempt on
659 # the channel when it sees a ban set that matches the exempt. The
660 # exempt remains active on the channel for as long as the ban is
661 # still active.
662 #
663 # userexempts
664 # Allow exempts to be made by users directly? If turned off, the
665 # bot will require all exempts to be made through the bot's console.
666 #
667 # dynamicinvites
668 # Only activate invites on the channel when necessary? This keeps
669 # the channel's invite list from getting excessively long. The bot
670 # still remembers every invite, but the invites are only activated
671 # when the channel is set to invite only and a user joins after
672 # requesting an invite. Once set, the invite remains until the
673 # channel goes to -i.
674 #
675 # userinvites
676 # Allow invites to be made by users directly? If turned off, the
677 # bot will require all invites to be made through the bot's console.
678 #
679 # autoop
680 # Op users with the +o flag as soon as they join the channel?
681 # This is insecure and not recommended.
682 #
683 # autohalfop
684 # Halfop users with the +l flag as soon as they join the channel?
685 # This is insecure and not recommended.
686 #
687 # bitch
688 # Only let users with +o) flag be opped on the channel?
689 #
690 # greet
691 # Say a user's info line when they join the channel?
692 #
693 # protectops
694 # Re-op a user with the +o flag if they get deopped?
695 #
696 # protecthalfops
697 # Re-halfop a user with the +l flag if they get dehalfopped?
698 #
699 # protectfriends
700 # Re-op a user with the +f flag if they get deopped?
701 #
702 # statuslog
703 # Log the channel status line every 5 minutes? This shows the bot's
704 # status on the channel (op, voice, etc.), the channel's modes, and
705 # the number of +m/+o/+v/+n/+b/+e/+I users on the channel. A sample
706 # status line follows:
707 #
708 # [01:40] @#lamest (+istn) : [m/1 o/1 v/4 n/7 b/1 e/5 I/7]
709 #
710 # revenge
711 # Remember people who deop/kick/ban the bot, valid ops, or friends
712 # and punish them? Users with the +f flag are exempt from revenge.
713 #
714 # revengebot
715 # This is similar to to the 'revenge' option, but it only triggers
716 # if a bot gets deopped, kicked or banned.
717 #
718 # autovoice
719 # Voice users with the +v flag when they join the channel?
720 #
721 # secret
722 # Prevent this channel from being listed on the botnet?
723 #
724 # shared
725 # Share channel-related user info for this channel?
726 #
727 # cycle
728 # Cycle the channel when it has no ops?
729 #
730 # dontkickops
731 # Do you want the bot not to be able to kick users who have the +o
732 # flag, letting them kick-flood for instance to protect the channel
733 # against clone attacks.
734 #
735 # inactive
736 # This prevents the bot from joining the channel (or makes it leave
737 # the channel if it is already there). It can be useful to make the
738 # bot leave a channel without losing its settings, channel-specific
739 # user flags, channel bans, and without affecting sharing.
740 #
741 # seen
742 # Respond to seen requests in the channel? The seen module must be
743 # loaded for this to work.
744 #
745 # nodesynch
746 # Allow non-ops to perform channel modes? This can stop the bot from
747 # fighting with services such as ChanServ, or from kicking IRCops when
748 # setting channel modes without having ops.
749 #
750 # Here is a shorter example:
751 #
752 # channel add #botcentral {
753 # chanmode "+mntisl 1"
754 # idle-kick 1
755 # }
756 # channel set #botcentral +bitch +enforcebans -greet +revenge
757
758
759 #### SERVER MODULE ####
760
761 # This module provides the core server support. You have to load this
762 # if you want your bot to come on IRC. Not loading this is equivalent
763 # to the old NO_IRC define.
764 loadmodule server
765
766 # What is your network?
767 # 0 = EFnet
768 # 1 = IRCnet
769 # 2 = Undernet
770 # 3 = DALnet
771 # 4 = +e/+I/max-modes 20 Hybrid
772 # 5 = Others
773 set net-type 0
774
775 # Set the nick the bot uses on IRC, and on the botnet unless you specify a
776 # separate botnet-nick, here.
777 set nick "Lamestbot"
778
779 # Set the alternative nick which the bot uses on IRC if the nick specified
780 # by 'set nick' is unavailable. All '?' characters will be replaced by random
781 # numbers.
782 set altnick "Llamab?t"
783
784 # Set what should be displayed in the real-name field for the bot on IRC.
785 set realname "/msg LamestBot hello"
786
787 # This is a Tcl script to be run immediately after connecting to a server.
788 bind evnt - init-server evnt:init_server
789
790 proc evnt:init_server {type} {
791 global botnick
792 putquick "MODE $botnick +i-ws"
793 }
794
795 # Set the default port which should be used if none is specified with
796 # '.jump' or in 'set servers'.
797 set default-port 6667
798
799 # This is the bot's server list. The bot will start at the first server listed,
800 # and cycle through them whenever it gets disconnected. You need to change these
801 # servers to YOUR network's servers.
802 #
803 # The format is:
804 # server[:port[:password]]
805 #
806 # Both the port and password fields are optional; however, if you want to set a
807 # password you must also set a port. If a port isn't specified it will default to
808 # your default-port setting.
809 set servers {
810 you.need.to.change.this:6667
811 another.example.com:7000:password
812 }
813
814 # This setting makes the bot try to get his original nickname back if its
815 # primary nickname is already in use.
816 set keep-nick 1
817
818 # Set this to 1 if you don't want your the bot to strip a leading '~' on
819 # user@hosts.
820 set strict-host 0
821
822 # This setting makes the bot squelch the error message when rejecting a DCC
823 # CHAT, SEND or message command. Normally, Eggdrop notifies the user that the
824 # command has been rejected because they don't have access. Note that sometimes
825 # IRC server operators detect bots that way.
826 set quiet-reject 1
827
828 # If you want your bot to answer lower case ctcp requests (non rfc-
829 # compliant), set this setting to 1. mIRC will do this, most other
830 # clients will not.
831 set lowercase-ctcp 0
832
833 # Set how many ctcps should be answered at once.
834 set answer-ctcp 3
835
836 # Set here how many msgs in how many seconds from one host constitutes
837 # a flood. If you set this to 0:0, msg flood protection will be disabled.
838 set flood-msg 5:60
839
840 # Set here how many ctcps in how many seconds from one host constitutes
841 # a flood. If you set this to 0:0, ctcp flood protection will be disabled.
842 set flood-ctcp 3:60
843
844 # This settings makes the bot cycle forever through the server list until
845 # it successfully connects to one.
846 set never-give-up 1
847
848 # This setting defines how long Eggdrop should wait before moving from one
849 # server to another on disconnect. If you set 0 here, Eggdrop will not wait
850 # at all and will connect instantly. Setting this too low could result in
851 # your bot being K:Lined.
852 set server-cycle-wait 60
853
854 # Set here how long Eggdrop should wait for a response when connecting to a
855 # server before giving up and moving on to next server.
856 set server-timeout 60
857
858 # If the number of servers on the net gets below this number, the bot
859 # will jump to a new server (it will assume it's on the losing end of
860 # a netsplit). Set this to 0 to turn off. If your bot is running on
861 # any major IRC network, this should probably be turned off.
862 set servlimit 0
863
864 # Set this to 1 if Eggdrop should check for stoned servers? (where the
865 # server connection has died, but Eggdrop hasn't been notified yet).
866 set check-stoned 1
867
868 # If you want your bot to exit the server if it receives an ERROR message,
869 # set this to 1.
870 set serverror-quit 1
871
872 # Set here the maximum number of lines to queue to the server. If you're
873 # going to dump large chunks of text to people over IRC, you will probably
874 # want to raise this. 300 is fine for most people though.
875 set max-queue-msg 300
876
877 # If you want Eggdrop to trigger binds for ignored users, set this to 1.
878 set trigger-on-ignore 0
879
880 # Allow identical messages in the mode queue?
881 set double-mode 1
882
883 # Allow identical messages in the server queue?
884 set double-server 1
885
886 # Allow identical messages in the help queue?
887 set double-help 1
888
889 # This optimizes the kick queue. It also traces nick changes and parts in
890 # the channel and changes the kick queue accordingly. There are three
891 # different options for this setting:
892 # 0 = Turn it off.
893 # 1 = Optimize the kick queue by summarizing kicks.
894 # 2 = Trace nick changes and parts on the channel and change the queue
895 # accordingly. For example, bot will not try to kick users who have
896 # already parted the channel.
897 # ATTENTION: Setting 2 is very CPU intensive.
898 set optimize-kicks 1
899
900 # If your network supports more recipients per command then 1, you can
901 # change this behavior here. Set this to the number of recipients per
902 # command, or set this to 0 for unlimited.
903 set stack-limit 4
904
905 ### SERVER MODULE - OTHER NETWORKS (net-type 5) ###
906
907 # This settings defines how umode +r is understood by Eggdrop. Some networks
908 # use +r to indicate a restricted connection. If this is your case, and you
909 # want your bot to leave restricted servers and jump to the next server on its
910 # list, then set it to 1.
911 #set check-mode-r 1
912
913 # This setting allows you to specify the maximum nick-length supported by your
914 # network. The default setting is 9. The maximum supported length by Eggdrop
915 # is 32.
916 #set nick-len 9
917
918 #### CTCP MODULE ####
919
920 # This module provides the normal ctcp replies that you'd expect.
921 # Without it loaded, CTCP CHAT will not work. The server module
922 # is required for this module to function.
923 loadmodule ctcp
924
925 # Set here how the ctcp module should answer ctcps. There are 3 possible
926 # operating modes:
927 # 0: Normal behavior is used.
928 # 1: The bot ignores all ctcps, except for CHAT and PING requests
929 # by users with the +o flag.
930 # 2: Normal behavior is used, however the bot will not answer more
931 # than X ctcps in Y seconds (defined by 'set flood-ctcp').
932 set ctcp-mode 0
933
934 # There are also several variables to help make your bot less noticeable.
935 # They are: ctcp-version, ctcp-finger, and ctcp-userinfo. You can use set to set
936 # them to values you'd like.
937
938
939 #### IRC MODULE ####
940
941 # This module provides basic IRC support for your bot. You have to
942 # load this if you want your bot to come on IRC. The server and channels
943 # modules must be loaded for this module to function.
944 loadmodule irc
945
946 # Set this to 1 if you want to bounce all server bans.
947 set bounce-bans 1
948
949 # Set this to 1 if you want to bounce all server exemptions (+e modes).
950 # This is disabled is use-exempts is disabled.
951 set bounce-exempts 0
952
953 # Set this to 1 if you want to bounce all server invitations (+I modes).
954 # This is disabled is use-invites is disabled.
955 set bounce-invites 0
956
957 # Set this to 1 if you want to bounce all server modes.
958 set bounce-modes 0
959
960 # Set here the maximum number of bans you want the bot to set on a channel.
961 # Eggdrop will not place any more bans if this limit is reached. Undernet
962 # currently allows 45 bans, IRCnet allows 30, EFnet allows 100, and DALnet
963 # allows 100.
964 set max-bans 30
965
966 # Set here the maximum number of exempts you want Eggdrop to set on a channel.
967 # Eggdrop will not place any more exempts if this limit is reached.
968 set max-exempts 20
969
970 # Set here the maximum number of invites you want Eggdrop to set on a channel.
971 # Eggdrop will not place any more invites if this limit is reached.
972 set max-invites 20
973
974 # There is a global limit for +b/+e/+I modes. This limit should be set to
975 # the same value as max-bans for networks that do not support +e/+I.
976 set max-modes 30
977
978 # The following settings should be left commented unless the default values
979 # are being overridden. By default, exempts and invites are on for EFnet and
980 # IRCnet, but off for all other large networks. This behavior can be modified
981 # with the following 2 flags. If your network doesn't support +e/+I modes then
982 # you will be unable to use these features.
983 #
984 # Do you want to enable exempts (+e modes)?
985 #set use-exempts 0
986
987 # Do you want to enable invites (+I modes)?
988 #set use-invites 0
989
990 # Set this to 1 if you want the bot to kick for control character/ctcp
991 # avalanches to a channel. Remember that if it does, it won't ban them.
992 # This can start kick floods.
993 set kick-fun 0
994
995 # Set this to 1 if you want the bot to ban for control character/ctcp
996 # avalanches to a channel. This can prevent kick floods, but it also can
997 # fill the banlist.
998 set ban-fun 0
999
1000 # If you want people to be able to add themselves to the bot's userlist
1001 # with the default userflags (defined above in the config file) via the
1002 # 'hello' msg command, set this to 1.
1003 set learn-users 0
1004
1005 # Set here the time (in seconds) to wait for someone to return from a netsplit
1006 # (i.e. wasop will expire afterwards). Set this to 1500 on IRCnet since its
1007 # nick delay stops after 30 minutes.
1008 set wait-split 600
1009
1010 # Set here the time (in seconds) that someone must have been off-channel
1011 # before re-displaying their info line.
1012 set wait-info 180
1013
1014 # Set this to the maximum number of bytes to send in the arguments
1015 # of modes sent to the server. Most servers default this to 200.
1016 set mode-buf-length 200
1017
1018 # Many IRCops find bots by seeing if they reply to 'hello' in a msg.
1019 # You can change this to another word by un-commenting the following
1020 # two lines and changing "myword" to the word wish to use instead of
1021 # 'hello'. It must be a single word.
1022 #unbind msg - hello *msg:hello
1023 #bind msg - myword *msg:hello
1024
1025 # Many takeover attempts occur due to lame users blindly /msg ident'ing to
1026 # the bot and attempting to guess passwords. We now unbind this command by
1027 # default to discourage them. You can enable these commands by commenting the
1028 # following two lines.
1029 unbind msg - ident *msg:ident
1030 unbind msg - addhost *msg:addhost
1031
1032 # Some IRC servers are using some non-standard op-like channel prefixes/modes.
1033 # Define them here so the bot can recognize them. Just "@" should be fine for
1034 # most networks. Un-comment the second line for some UnrealIRCds.
1035
1036 set opchars "@"
1037 #set opchars "@&~"
1038
1039 # If you are so lame you want the bot to display peoples info lines, even
1040 # when you are too lazy to add their chanrecs to a channel, set this to 1.
1041 # *NOTE* This means *every* user with an info line will have their info
1042 # line displayed on EVERY channel they join (provided they have been gone
1043 # longer than wait-info).
1044 set no-chanrec-info 0
1045
1046 ### IRC MODULE - IRCnet/EFnet SPECIFIC FEATURES (net-type 0/1/4) ###
1047
1048 # Attention: Use these settings *only* if you set 'net-type' to 1!
1049
1050 # At the moment, the current IRCnet IRCd version (2.10) doesn't support the
1051 # mixing of b, o and v modes with e and I modes. This might be changed in the
1052 # future, so use 1 at the moment for this setting.
1053 set prevent-mixing 1
1054
1055 ### IRC MODULE - OTHER NETWORKS (net-type 5) ###
1056
1057 # Attention: Use these settings *only* if you set 'net-type' to 5!
1058
1059 # If your network supports more users per kick command then 1, you can
1060 # change this behavior here. Set this to the number of users to kick at
1061 # once, or set this to 0 for all at once.
1062 #set kick-method 1
1063
1064 # Some networks allow you to stack lots of channel modes into one line.
1065 # They're all guaranteed to support at least 3, so that's the default.
1066 # If you know your network supports more, you may want to adjust this.
1067 # This setting is limited to 6, although if you want to use a higher value,
1068 # you can modify this by changing the value of MODES_PER_LINE_MAX in
1069 # src/chan.h and recompiling the bot.
1070 #set modes-per-line 3
1071
1072 # Some networks don't include the +l limit and +k or -k key modes
1073 # in the modes-per-line (see above) limitation. Set include-lk to 0 for
1074 # these networks.
1075 #set include-lk 1
1076
1077 # Set this to 1 if your network uses IRCu2.10.01 specific /who requests.
1078 # Eggdrop can, therefore, ask only for exactly what's needed.
1079 #set use-354 0
1080
1081 # If your network doesn't use rfc 1459 compliant string matching routines,
1082 # set this to 0.
1083 #set rfc-compliant 1
1084
1085
1086 #### TRANSFER MODULE ####
1087
1088 # The transfer module provides dcc send/get support and userfile transfer
1089 # support for userfile sharing. Un-comment the next line to load it if you
1090 # need this functionality.
1091 #loadmodule transfer
1092
1093 # Set here the maximum number of simultaneous downloads to allow for
1094 # each user.
1095 set max-dloads 3
1096
1097 # Set here the block size for dcc transfers. ircII uses 512 bytes,
1098 # but admits that it may be too small. 1024 is standard these days.
1099 # 0 is turbo-dcc (recommended).
1100 set dcc-block 0
1101
1102 # Enable this setting if you want to copy files into the /tmp directory
1103 # before sending them. This is useful on most systems for file stability,
1104 # but if your directories are NFS mounted, it's a pain, and you'll want
1105 # to set this to 0. If you are low on disk space, you may also want to
1106 # set this to 0.
1107 set copy-to-tmp 1
1108
1109 # Set here the time (in seconds) to wait before an inactive transfer times out.
1110 set xfer-timeout 30
1111
1112
1113 #### SHARE MODULE ####
1114
1115 # This module provides userfile sharing support between two directly
1116 # linked bots. The transfer and channels modules are required for this
1117 # module to correctly function. Un-comment the following line to load
1118 # the share module.
1119 #loadmodule share
1120
1121 # Settings in this section must be un-commented before setting.
1122
1123 # When two bots get disconnected, this setting allows them to create a
1124 # resync buffer which saves all changes done to the userfile during
1125 # the disconnect. When they reconnect, they will not have to transfer
1126 # the complete user file, but, instead, just send the resync buffer.
1127 #
1128 # NOTE: This has been known to cause loss of channel flags and other
1129 # problems. Using this setting is not recommended.
1130 #set allow-resync 0
1131
1132 # This setting specifies how long to hold another bots resync data
1133 # before flushing it.
1134 #set resync-time 900
1135
1136 # When sharing user lists, DON'T ACCEPT global flag changes from other bots?
1137 # NOTE: The bot will still send changes made on the bot, it just won't accept
1138 # any global flag changes from other bots. This overrides the private-globals
1139 # setting (below).
1140 #set private-global 0
1141
1142 # When sharing user lists, if private-global isn't set, which global flag
1143 # changes from other bots should be ignored?
1144 #set private-globals "mnot"
1145
1146 # When sharing user lists, don't accept ANY userfile changes from other
1147 # bots? Paranoid people should use this feature on their hub bot. This
1148 # will force all userlist changes to be made via the hub.
1149 #set private-user 0
1150
1151 # This setting makes the bot discard its own bot records in favor of
1152 # the ones sent by the hub.
1153 # NOTE: No passwords or botflags are shared, only ports and
1154 # address are added to sharing procedure. This only works with hubs that
1155 # are v1.5.1 or higher.
1156 #set override-bots 0
1157
1158
1159 #### COMPRESS MODULE ####
1160
1161 # This module provides provides support for file compression. This allows the
1162 # bot to transfer compressed user files and therefore save a significant amount
1163 # of bandwidth. The share module must be loaded to load this module. Un-comment
1164 # the following line to the compress module.
1165 #loadmodule compress
1166
1167 # Allow compressed sending of user files? The user files are compressed with
1168 # the compression level defined in `compress-level'.
1169 set share-compressed 1
1170
1171 # This is the default compression level used.
1172 #set compress-level 9
1173
1174
1175 #### FILESYSTEM MODULE ####
1176
1177 # This module provides an area within the bot where users can store and
1178 # manage files. With this module, the bot is usable as a file server. The
1179 # transfer module is required for this module to function. Un-comment
1180 # the following line to load the filesys module.
1181 #loadmodule filesys
1182
1183 # Set here the 'root' directory for the file system.
1184 set files-path "/home/mydir/filesys"
1185
1186 # If you want to allow uploads, set this to the directory uploads
1187 # should be put into. Set this to "" if you don't want people to
1188 # upload files to your bot.
1189 set incoming-path "/home/mydir/filesys/incoming"
1190
1191 # If you don't want to have a central incoming directory, but instead
1192 # want uploads to go to the current directory that a user is in, set
1193 # this setting to 1.
1194 set upload-to-pwd 0
1195
1196 # Eggdrop creates a '.filedb' file in each subdirectory of your file area
1197 # to keep track of its own file system information. If you can't do that (for
1198 # example, if the dcc path isn't owned by you, or you just don't want it to do
1199 # that) specify a path here where you'd like all of the database files to be
1200 # stored instead.
1201 set filedb-path ""
1202
1203 # Set here the maximum number of people that can be in the file area at once.
1204 # Setting this to 0 makes it effectively infinite.
1205 set max-file-users 20
1206
1207 # Set here the maximum allowable file size that will be received (in kb).
1208 # Setting this to 0 makes it effectively infinite.
1209 set max-filesize 1024
1210
1211
1212 #### NOTES MODULE ####
1213
1214 # This module provides support for storing of notes for users from each other.
1215 # Note sending between currently online users is supported in the core, this is
1216 # only for storing the notes for later retrieval.
1217 loadmodule notes
1218
1219 # Set here the filename where private notes between users are stored.
1220 set notefile "LamestBot.notes"
1221
1222 # Set here the maximum number of notes to allow to be stored for each user
1223 # (to prevent flooding).
1224 set max-notes 50
1225
1226 # Set here how long (in days) to store notes before expiring them.
1227 set note-life 60
1228
1229 # Set this to 1 if you want to allow users to specify a forwarding address
1230 # for forwarding notes to another account on another bot.
1231 set allow-fwd 0
1232
1233 # Set this to 1 if you want the bot to let people know hourly if they have
1234 # any notes.
1235 set notify-users 1
1236
1237 # Set this to 1 if you want the bot to let people know on join if they have
1238 # any notes.
1239 set notify-onjoin 1
1240
1241 # Comment out this next line. Otherwise, your bot won't start.
1242 die "You didn't edit your config file completely like you were told, did you?"
1243
1244
1245 #### CONSOLE MODULE ####
1246
1247 # This module provides storage of console settings when you exit the
1248 # bot or type .store on the partyline.
1249 loadmodule console
1250
1251 # Save users console settings automatically? Otherwise, they have
1252 # to use the .store command.
1253 set console-autosave 1
1254
1255 # If a user doesn't have any console settings saved, which channel
1256 # do you want them automatically put on?
1257 set force-channel 0
1258
1259 # Enable this setting if a user's global info line should be displayed
1260 # when they join a botnet channel.
1261 set info-party 0
1262
1263
1264 #### WOOBIE MODULE ####
1265
1266 # This is for demonstrative purposes only. If you are looking for starting
1267 # point in writing modules, woobie is the right thing.
1268 #loadmodule woobie
1269
1270
1271 #### SEEN MODULE ####
1272
1273 # This module provides very basic seen commands via msg, on channel or via dcc.
1274 # This module works only for users in the bot's userlist. If you are looking for
1275 # a better and more advanced seen module, try the gseen module by G'Quann. You
1276 # can find it at http://www.visions-of-fantasy.de/gseen.mod/.
1277 #loadmodule seen
1278
1279
1280 #### BLOWFISH MODULE ####
1281
1282 # IF YOU DON'T READ THIS YOU MAY RENDER YOUR USERFILE USELESS LATER
1283 # Eggdrop encrypts its userfile, so users can have secure passwords.
1284 # Please note that when you change your encryption method later (i.e.
1285 # using other modules like a md5 module), you can't use your current
1286 # userfile anymore. Eggdrop will not start without an encryption module.
1287 #loadmodule blowfish
1288
1289
1290 #### ASSOC MODULE ####
1291
1292 # This module provides assoc support, i.e. naming channels on the botnet.
1293 # You can load it by un-commenting the following line.
1294 #loadmodule assoc
1295
1296
1297 #### WIRE MODULE ####
1298
1299 # This module provides all the standard .wire commands via dcc. It is an
1300 # encrypted partyline communication tool, compatible with wire.tcl. An
1301 # encryption module must be loaded to use this module. Un-comment the
1302 # following line to load the wire module.
1303 #loadmodule wire
1304
1305 #### UPTIME MODULE ####
1306
1307 # This module reports uptime statistics to http://uptime.eggheads.org.
1308 # Go look and see what your uptime is! It takes about 9 hours to show up,
1309 # so if your bot isn't listed, try again later. The server module must be
1310 # loaded for this module to function.
1311 #
1312 # Information sent to the server includes the bot's uptime, botnet-nick,
1313 # server, version, and IP address. This information is stored in a temporary
1314 # logfile for debugging purposes only. The only publicly available information
1315 # will be the bot's botnet-nick, version and uptime. If you do not wish for this
1316 # information to be sent, comment out the following line.
1317 loadmodule uptime
1318
1319 ##### SCRIPTS #####
1320
1321 # This is a good place to load scripts to use with your bot.
1322
1323 # This line loads script.tcl from the scripts directory inside your Eggdrop's
1324 # directory. All scripts should be put there, although you can place them where
1325 # you like as long as you can supply a fully qualified path to them.
1326 #
1327 # source scripts/script.tcl
1328
1329 source scripts/alltools.tcl
1330 source scripts/action.fix.tcl
1331
1332 # Use this script for Tcl and Eggdrop downwards compatibility.
1333 # NOTE: This can also cause problems with some newer scripts.
1334 source scripts/compat.tcl
1335
1336 # This script provides many useful informational functions, like setting
1337 # users' URLs, e-mail address, ICQ numbers, etc. You can modify it to add
1338 # extra entries.
1339 source scripts/userinfo.tcl
1340 loadhelp userinfo.help

webmaster@eggheads.org
ViewVC Help
Powered by ViewVC 1.1.23