/[cvs]/eggdrop1.6/eggdrop.conf
ViewVC logotype

Contents of /eggdrop1.6/eggdrop.conf

Parent Directory Parent Directory | Revision Log Revision Log | View Revision Graph Revision Graph


Revision 1.20 - (show annotations) (download)
Sun Feb 2 10:19:33 2003 UTC (16 years, 8 months ago) by wcc
Branch: MAIN
Changes since 1.19: +8 -15 lines
* Merged use-console-r and debug-output into one new setting named raw-log.
* Small indenting fix from a pls_bot_cosmetic.

1 #! /path/to/executable/eggdrop
2 # ^- This should contain a fully qualified path to your Eggdrop executable.
3 #
4 # $Id: eggdrop.conf,v 1.19 2003/02/02 04:20:43 wcc Exp $
5 #
6 # This is a sample Eggdrop configuration file which includes all possible
7 # settings that can be used to configure your bot.
8 #
9 # The pound signs (#) that you see at the beginning of some lines mean that
10 # the remainder of that line is a comment, or just for your information. By
11 # adding or deleting pound signs, you can comment or uncomment a setting,
12 # respectively.
13 #
14 # Arguments for a command or setting may be inclosed in <>'s or []'s in the
15 # example/description. Arguments in <>'s are required, while [] means optional.
16 #
17 # More detailed descriptions of all these settings can be found in
18 # doc/settings/.
19
20
21 ##### BASIC SETTINGS #####
22
23 # This setting defines the username the bot uses on IRC. This setting has
24 # no effect if an ident daemon is running on your bot's machine.
25 set username "lamest"
26
27 # This setting defines which contact person should be shown in .status,
28 # /msg help, and other places. You really should include this information.
29 set admin "Lamer <email: lamer@lamest.lame.org>"
30
31 # This setting is used only for info to share with others on your botnet.
32 # Set this to the IRC network your bot is connected to.
33 set network "I.didn't.edit.my.config.file.net"
34
35 # This setting defines the timezone is your bot in. It's used for internal
36 # routines as well as for logfile timestamping and scripting purposes.
37 # The timezone string specifies the name of the timezone and must be three
38 # or more alphabetic characters. For example, Central European Time(UTC+1)
39 # should be "CET".
40 set timezone "EST"
41
42 # The offset setting specifies the time value to be added to the local
43 # time to get Coordinated Universal Time (UTC aka GMT). The offset is
44 # positive if the local timezone is west of the Prime Meridian and
45 # negative if it is east. The value (in hours) must be between -23 and
46 # 23. For example, if the timezone is UTC+1, the offset is -1.
47 set offset "5"
48
49 # If you don't want to use the timezone setting for scripting purposes only,
50 # but instead everywhere possible, un-comment the following line.
51 #set env(TZ) "$timezone $offset"
52
53 # If you're using virtual hosting (your machine has more than 1 IP), you
54 # may want to specify the particular IP to bind to. You can specify either
55 # by hostname or by IP. You may also want to set the hostname here if
56 # Eggdrop has trouble detecting it when it starts up.
57 #set my-hostname "virtual.host.com"
58 #set my-ip "99.99.0.0"
59
60 # If you want to have your Eggdrop messages displayed in a language other
61 # than English, change this setting to match your preference. An alternative
62 # would be to set the environment variable EGG_LANG to that value.
63 #addlang "english"
64
65
66 ##### LOG FILES #####
67
68 # Eggdrop is capable of logging various things, from channel chatter to
69 # commands people use on the bot and file transfers. Logfiles are normally
70 # kept for 24 hours. Afterwards, they will be renamed to "(logfile).yesterday".
71 # After 48 hours, they will be overwritten by the logfile of the next day.
72 #
73 # Events are logged by certain categories. This way, you can specify
74 # exactly what kind of events you want sent to various logfiles.
75 #
76 # Logfile flags:
77 # b - information about bot linking and userfile sharing
78 # c - commands
79 # d - misc debug information
80 # h - raw share traffic
81 # j - joins, parts, quits, and netsplits on the channel
82 # k - kicks, bans, and mode changes on the channel
83 # m - private msgs, notices and ctcps to the bot
84 # o - misc info, errors, etc (IMPORTANT STUFF)
85 # p - public text on the channel
86 # r - raw incoming server traffic
87 # s - server connects, disconnects, and notices
88 # t - raw botnet traffic
89 # v - raw outgoing server traffic
90 # w - wallops (make sure the bot sets +w in init-server)
91 # x - file transfers and file-area commands
92 #
93 # Note that modes d, h, r, t, and v can fill disk quotas quickly. There are
94 # also eight user-defined levels (1-8) which can be used by Tcl scripts.
95 #
96 # Each logfile belongs to a certain channel. Events of type 'k', 'j', and 'p'
97 # are logged to whatever channel they happened on. Most other events are
98 # currently logged to every channel. You can make a logfile belong to all
99 # channels by assigning it to channel "*".
100
101 # This is the maximum number of logfiles allowed. This setting can be
102 # increased; however, don't decrease it.
103 set max-logs 5
104
105 # This is the maximum size of your logfiles. Set it to 0 to disable.
106 # This value is in kilobytes, so '550' would mean cycle logs when it
107 # reaches the size of 550 kilobytes. Note that this only works if you
108 # have keep-all-logs 0 (OFF).
109 set max-logsize 0
110
111 # This could be good if you have had problem with the logfile filling
112 # your quota/hard disk or if you log +p and publish it to the web and
113 # need more up-to-date info. Note that this setting might increase the
114 # CPU usage of your bot (on the other hand it will decrease your mem usage).
115 set quick-logs 0
116
117 # This setting allows you the logging of raw incoming server traffic via
118 # console/log flag 'r', raw outgoing server traffic via console/log mode 'v',
119 # raw botnet traffic via console/log mode 't', and raw share traffic via
120 # console/log mode 'h'. These flags can create a large security hole,
121 # allowing people to see user passwords. This is now restricted to +n users
122 # only. Please choose your owners with care.
123 set raw-log 0
124
125 # This creates a logfile named eggdrop.log containing private msgs/ctcps,
126 # commands, errors, and misc. info from any channel.
127 logfile mco * "logs/eggdrop.log"
128
129 # This creates a logfile named lamest.log containing joins, parts,
130 # netsplits, kicks, bans, mode changes, and public chat on the
131 # channel #lamest.
132 logfile jpk #lamest "logs/lamest.log"
133
134 # Use this feature to timestamp entries in the log file.
135 set log-time 1
136
137 # If you want to keep your logfiles forever, turn this setting on. All
138 # logfiles will get suffix ".[day, 2 digits][month, 3 letters][year, 4 digits]".
139 # Note that your quota/hard-disk might be filled by this, so check your
140 # logfiles often and download them.
141 set keep-all-logs 0
142
143 # If keep-all-logs is 1, this setting will define the suffix of the logfiles.
144 # The default will result in a suffix like "04May2000". "%Y%m%d" will produce
145 # the often used yyyymmdd format. Read the strftime manpages for more options.
146 # NOTE: On systems which don't support strftime, the default format will
147 # be used _always_.
148 set logfile-suffix ".%d%b%Y"
149
150 # You can specify when Eggdrop should switch logfiles and start fresh. You
151 # must use military time for this setting. 300 is the default, and describes
152 # 03:00 (AM).
153 set switch-logfiles-at 300
154
155 # "Writing user file..." and "Writing channel file..." messages won't be
156 # logged anymore if this option is enabled.
157 set quiet-save 0
158
159
160 ##### CONSOLE #####
161
162 # This is the default console mode. It uses the same event flags as the log
163 # files do. The console channel is automatically set to your "primary" channel,
164 # which is set in the modules section of the config file. Masters can change
165 # their console channel and modes with the '.console' command.
166
167 set console "mkcobxs"
168
169
170 ##### FILES AND DIRECTORIES #####
171
172 # Specify here the filename your userfile should be saved as.
173 set userfile "LamestBot.user"
174
175 # Specify here the filename Eggdrop will save its pid to. If no pidfile is
176 # specified, pid.(botnet-nick) will be used.
177 #set pidfile "pid.LamestBot"
178
179 # If you want your userfile to be sorted upon saving, enable this setting.
180 # This causes the bot to use bit more CPU when saving the usefile.
181 set sort-users 0
182
183 # Specify here where Eggdrop should look for help files. Don't modify this
184 # setting unless you know what you're doing!
185 set help-path "help/"
186
187 # Specify here where Eggdrop should look for text files. This is used for
188 # certain Tcl and DCC commands.
189 set text-path "text/"
190
191 # Set here a place to store temporary files.
192 set temp-path "/tmp"
193
194 # The MOTD (Message Of The day) is displayed when people dcc chat or telnet
195 # to the bot. Look at doc/text-substitutions.doc for options.
196 set motd "text/motd"
197
198 # This banner will be displayed on telnet connections. Look at
199 # doc/text-substitutions.doc for options.
200 set telnet-banner "text/banner"
201
202 # This specifies what permissions the user, channel, and notes files should
203 # be set to. The octal values are the same as for the chmod system command.
204 #
205 # To remind you:
206 #
207 # u g o u g o u g o
208 # 0600 rw------- 0400 r-------- 0200 -w------- u - user
209 # 0660 rw-rw---- 0440 r--r----- 0220 -w--w---- g - group
210 # 0666 rw-rw-rw- 0444 r--r--r-- 0222 -w--w--w- o - others
211 #
212 # Note that the default 0600 is the most secure one and should only be changed
213 # if you need your files for shell scripting or other external applications.
214 set userfile-perm 0600
215
216
217 ##### BOTNET/DCC/TELNET #####
218
219 # Settings in this section should be unimportant for you until you deal
220 # with botnets (multiple Eggdrops connected together to maximize efficiency).
221 # You should read doc/BOTNET before modifying these settings.
222
223 # If you want to use a different nickname on the botnet than you use on
224 # IRC (i.e. if you're on an un-trusted botnet), un-comment the next line
225 # and set it to the nick you would like to use.
226 #set botnet-nick "LlamaBot"
227
228 # This opens a telnet port by which you and other bots can
229 # interact with the Eggdrop by telneting in.
230 #
231 # There are more options for the listen command in doc/tcl-commands.doc.
232 # Note, if you are running more than one bot on the same machine, you will
233 # want to space the telnet ports at LEAST 5 apart. 10 is even better.
234 #
235 # Valid ports are typically anything between 1025 and 65535 assuming the
236 # port is not already in use.
237 #
238
239 # If you would like the bot to listen for users and bots in separate ports,
240 # use the following format.
241 #
242 # listen 3333 bots
243 # listen 4444 users
244 #
245 # If you wish to use only one port, use this format:
246 listen 3333 all
247
248 # This setting defines whether or not people can boot users on the Eggdrop
249 # from other bots in your botnet. Valid settings are:
250 # 0 - allow *no* outside boots
251 # 1 - allow boots from sharebots
252 # 2 - allow any boots
253 set remote-boots 2
254
255 # This setting prohibits remote bots from telling your Eggdrop to unlink from
256 # share bots.
257 set share-unlinks 1
258
259 # This setting will drop telnet connections not matching a known host. It
260 # greatly improves protection from IRCops, but makes it impossible to add
261 # hosts on limbo (NOIRC) bots or have NEW as a valid login.
262 set protect-telnet 0
263
264 # This setting will make the bot ignore DCC chat requests which appear to
265 # have bogus information on the grounds that the user may have been trying
266 # to make the bot connect to somewhere that will get it into trouble, or
267 # that the user has a broken client (like mIRC tends to do), in which case
268 # the connect wouldn't work anyway. It's suggested that you turn this on.
269 set dcc-sanitycheck 0
270
271 # This settings defines a time in seconds that the bot should wait before
272 # a dcc chat, telnet, or relay connection times out.
273 set ident-timeout 5
274
275 # Define here whether or not a +o user still needs the +p flag to dcc the bot.
276 set require-p 0
277
278 # If you want people allow to telnet in and type 'NEW' to become a new user,
279 # set this to 1. This is similar to the 'hello' msg command. The protect-telnet
280 # setting must be set to 0 to use this.
281 set open-telnets 0
282
283 # If you don't want Eggdrop to identify itself as an eggdrop on a telnet
284 # connection, set this setting to 1. Eggdrop will display 'Nickname' instead.
285 set stealth-telnets 0
286
287 # If you want Eggdrop to display a banner when telneting in, set this setting
288 # to 1. The telnet banner is set by 'set telnet-banner'.
289 set use-telnet-banner 0
290
291 # This settings defines a time in seconds that the bot should wait before
292 # a dcc chat, telnet, or relay connection times out.
293 set connect-timeout 15
294
295 # Specify here the number of lines to accept from a user on the partyline
296 # within 1 second before they are considered to be flooding and therefore
297 # get booted.
298 set dcc-flood-thr 3
299
300 # Define here how many telnet connection attempts in how many seconds from
301 # the same host constitute a flood. The correct format is Attempts:Seconds.
302 set telnet-flood 5:60
303
304 # If you want telnet-flood to apply even to +f users, set this setting to 1.
305 set paranoid-telnet-flood 1
306
307 # Set here the amount of seconds before giving up on hostname/address
308 # lookup (you might want to increase this if you are on a slow network).
309 set resolve-timeout 15
310
311
312 ##### MORE ADVANCED SETTINGS #####
313
314 # Set this to your socks host if your Eggdrop sits behind a firewall. If
315 # you use a Sun "telnet passthru" firewall, prefix the host with a '!'.
316 #set firewall "!sun-barr.ebay:3666"
317
318 # If you have a NAT firewall (you box has an IP in one of the following
319 # ranges: 192.168.0.0-192.168.255.255, 172.16.0.0-172.31.255.255,
320 # 10.0.0.0-10.255.255.255 and your firewall transparently changes your
321 # address to a unique address for your box) or you have IP masquerading
322 # between you and the rest of the world, and /dcc chat, /ctcp chat or
323 # userfile sharing aren't working, enter your outside IP here. Do not
324 # enter anything for my-ip or my-hostname if you use this setting.
325 #set nat-ip "127.0.0.1"
326
327 # If you want all dcc file transfers to use a particular portrange either
328 # because you're behind a firewall, or for other security reasons, set it
329 # here.
330 #set reserved-portrange 2010:2020
331
332 # Set the time in minutes that temporary ignores should last.
333 set ignore-time 15
334
335 # Define here what Eggdrop considers 'hourly'. All calls to it, including such
336 # things as note notifying or userfile saving, are affected by this.
337 # For example:
338 #
339 # set hourly-updates 15
340 #
341 # The bot will save its userfile 15 minutes past every hour.
342 set hourly-updates 00
343
344 # Un-comment the next line and set the list of owners of the bot.
345 # You NEED to change this setting.
346 #set owner "MrLame, MrsLame"
347
348 # Who should a note be sent to when new users are learned?
349 set notify-newusers "$owner"
350
351 # Enter the flags that all new users should get by default. See '.help whois'
352 # on the partyline for a list of flags and their descriptions.
353 set default-flags "hp"
354
355 # Enter all user-defined fields that should be displayed in a '.whois'.
356 # This will only be shown if the user has one of these extra fields.
357 # You might prefer to comment this out and use the userinfo1.0.tcl script
358 # which provides commands for changing all of these.
359 set whois-fields "url birthday"
360
361 # Enable this setting if you want your Eggdrop to die upon receiving a SIGHUP
362 # kill signal. Otherwise, the Eggdrop will just save its userfile and rehash.
363 set die-on-sighup 0
364
365 # Enable this setting if you want your Eggdrop to die upon receiving a SIGTERM
366 # kill signal. Otherwise, the Eggdrop will just save its userfile and rehash.
367 set die-on-sigterm 1
368
369 # Comment these two lines if you wish to enable the .tcl and .set commands.
370 # If you select your owners wisely, you should be okay enabling these.
371 unbind dcc n tcl *dcc:tcl
372 unbind dcc n set *dcc:set
373
374 # If you enable this setting, only permanent owners (owner setting) will be
375 # able to use .tcl and .set. Moreover, if you want only let permanent owners
376 # use .dump, then set this to 2.
377 set must-be-owner 1
378
379 # Comment out this line to add the 'simul' partyline command (owners can
380 # manipulate other people on the party line). Please select owners wisely
381 # and use this command ethically!
382 unbind dcc n simul *dcc:simul
383
384 # Set here the maximum number of dcc connections you will allow. You can
385 # increase this later, but never decrease it.
386 set max-dcc 50
387
388 # Enable this setting if you want +d & +k users to use commands bound as -|-.
389 set allow-dk-cmds 1
390
391 # If your Eggdrop rejects bots that actually have already disconnected from
392 # another hub, but the disconnect information has not yet spread over the
393 # botnet due to lag, use this setting. The bot will wait dupwait-timeout
394 # seconds before it checks again and then finally reject the bot.
395 set dupwait-timeout 5
396
397 # You MUST remove this line for your bot to start. This has been added to
398 # prevent you from starting up a bot that is not fully configured. Bots
399 # that have not been fully configured may join the wrong IRC network, the
400 # wrong channels, or generally do things that you do not want. Please make
401 # sure that you have double-checked every setting. There's also a similar line
402 # lower down, just to make sure you're reading :)
403 die "Please make sure you edit your config file completely."
404
405
406 ##### MODULES #####
407
408 # Below are various settings for the modules included with Eggdrop.
409 # PLEASE READ AND EDIT THEM CAREFULLY, even if you're an old hand at
410 # Eggdrop, things change.
411
412 # This path specifies the path were Eggdrop should look for its modules.
413 # If you run the bot from the compilation directory, you will want to set
414 # this to "". If you use 'make install' (like all good kiddies do ;), this
415 # is a fine default. Otherwise, use your head :)
416 set mod-path "modules/"
417
418
419 #### DNS MODULE ####
420
421 # This module provides asynchronous dns support. This will avoid long
422 # periods where the bot just hangs there, waiting for a hostname to
423 # resolve, which will often let it timeout on all other connections.
424 loadmodule dns
425
426
427 #### CHANNELS MODULE ####
428
429 # This module provides channel related support for the bot. Without it,
430 # you won't be able to make the bot join a channel or save channel
431 # specific userfile information.
432 loadmodule channels
433
434 # Enter here the filename where dynamic channel settings are stored.
435 set chanfile "LamestBot.chan"
436
437 # Set this setting to 1 if you want your bot to expire bans/exempts/invites set
438 # by other opped bots on the channel.
439 set force-expire 0
440
441 # Set this setting to 1 if you want your bot to share user greets with other
442 # bots on the channel if sharing user data.
443 set share-greet 0
444
445 # Set this setting to 1 if you want to allow users to store an info line.
446 set use-info 1
447
448 # The following settings are used as default values when you .+chan #chan or .tcl
449 # channel add #chan. Look in the section below for explanation of every option.
450
451 set global-flood-chan 10:60
452 set global-flood-deop 3:10
453 set global-flood-kick 3:10
454 set global-flood-join 5:60
455 set global-flood-ctcp 3:60
456 set global-flood-nick 5:60
457 set global-aop-delay 5:30
458 set global-idle-kick 0
459 set global-chanmode "nt"
460 set global-stopnethack-mode 0
461 set global-revenge-mode 0
462 set global-ban-time 120
463 set global-exempt-time 60
464 set global-invite-time 60
465
466 set global-chanset {
467 -autoop -autovoice
468 -bitch +cycle
469 +dontkickops +dynamicbans
470 +dynamicexempts +dynamicinvites
471 -enforcebans +greet
472 -inactive -nodesynch
473 -protectfriends +protectops
474 -revenge -revengebot
475 -secret -seen
476 +shared +statuslog
477 +userbans +userexempts
478 +userinvites -protecthalfops
479 -autohalfop
480 }
481
482 # Add each static channel you want your bot to sit in using the following
483 # command. There are many different possible settings you can insert into
484 # this command, which are explained below.
485 #
486 # channel add #lamest {
487 # chanmode "+nt-likm"
488 # idle-kick 0
489 # stopnethack-mode 0
490 # revenge-mode 0
491 # ban-time 120
492 # exempt-time 60
493 # invite-time 60
494 # aop-delay 5:30
495 # need-op { putserv "PRIVMSG #lamest :op me cos i'm lame!" }
496 # need-invite { putserv "PRIVMSG #lamest :let me in!" }
497 # need-key { putserv "PRIVMSG #lamest :let me in!" }
498 # need-unban { putserv "PRIVMSG #lamest :let me in!" }
499 # need-limit { putserv "PRIVMSG #lamest :let me in!" }
500 # flood-chan 10:60
501 # flood-deop 3:10
502 # flood-kick 3:10
503 # flood-join 5:60
504 # flood-ctcp 3:60
505 # flood-nick 5:60
506 # }
507 #
508 # chanmode +/-<modes>
509 # This setting makes the bot enforce channel modes. It will always add
510 # the +<modes> and remove the -<modes> modes.
511 # idle-kick 0
512 # This setting will make the bot check every minute for idle
513 # users. Set this to 0 to disable idle check.
514 #
515 # stopnethack-mode 0
516 # This setting will make the bot de-op anyone who enters the channel
517 # with serverops. There are seven different modes for this settings:
518 # 0 turn off,
519 # 1 isoptest (allow serverop if registered op)
520 # 2 wasoptest (allow serverop if op before split)
521 # 3 allow serverop if isop or wasop
522 # 4 allow serverop if isop and wasop.
523 # 5 If the channel is -bitch, see stopnethack-mode 3
524 # If the channel is +bitch, see stopnethack-mode 1
525 # 6 If the channel is -bitch, see stopnethack-mode 2
526 # If the channel is +bitch, see stopnethack-mode 4
527 #
528 # revenge-mode 0
529 # This settings defines how the bot should punish bad users when
530 # revenging. There are four possible settings:
531 # 0 Deop the user.
532 # 1 Deop the user and give them the +d flag for the channel.
533 # 2 Deop the user, give them the +d flag for the channel, and kick them.
534 # 3 Deop the user, give them the +d flag for the channel, kick, and ban them.
535 #
536 # ban-time 120
537 # Set here how long temporary bans will last (in minutes). If you
538 # set this setting to 0, the bot will never remove them.
539 #
540 # exempt-time 60
541 # Set here how long temporary exempts will last (in minutes). If you
542 # set this setting to 0, the bot will never remove them. The bot will
543 # check the exempts every X minutes, but will not remove the exempt if
544 # a ban is set on the channel that matches that exempt. Once the ban is
545 # removed, then the exempt will be removed the next time the bot checks.
546 # Please note that this is an IRCnet feature.
547 #
548 # invite-time 60
549 # Set here how long temporary invites will last (in minutes). If you
550 # set this setting to 0, the bot will never remove them. The bot will
551 # check the invites every X minutes, but will not remove the invite if
552 # a channel is set to +i. Once the channel is -i then the invite will be
553 # removed the next time the bot checks. Please note that this is an IRCnet
554 # feature.
555 #
556 # aop-delay (minimum:maximum)
557 # This is used for autoop, autohalfop, autovoice. If an op or voice joins a
558 # channel while another op or voice is pending, the bot will attempt to put
559 # both modes on one line.
560 # aop-delay 0 No delay is used.
561 # aop-delay X An X second delay is used.
562 # aop-delay X:Y A random delay between X and Y is used.
563 #
564 # need-op { putserv "PRIVMSG #lamest :op me cos i'm lame!" }
565 # This setting will make the bot run the script enclosed in brackets
566 # if it does not have ops. This must be shorter than 120 characters.
567 # If you use scripts like getops.tcl or botnetop.tcl, you don't need
568 # to set this setting.
569 #
570 # need-invite { putserv "PRIVMSG #lamest :let me in!" }
571 # This setting will make the bot run the script enclosed in brackets
572 # if it needs an invite to the channel. This must be shorter than 120
573 # characters. If you use scripts like getops.tcl or botnetop.tcl, you
574 # don't need to set this setting.
575 #
576 # need-key { putserv "PRIVMSG #lamest :let me in!" }
577 # This setting will make the bot run the script enclosed in brackets
578 # if it needs the key to the channel. This must be shorter than 120
579 # characters. If you use scripts like getops.tcl or botnetop.tcl, you
580 # don't need to set this setting
581 #
582 # need-unban { putserv "PRIVMSG #lamest :let me in!" }
583 # This setting will make the bot run the script enclosed in brackets
584 # if it needs to be unbanned on the channel. This must be shorter than
585 # 120 characters. If you use scripts like getops.tcl or botnetop.tcl,
586 # you don't need to set this setting
587 #
588 # need-limit { putserv "PRIVMSG #lamest :let me in!" }
589 # This setting will make the bot run the script enclosed in brackets
590 # if it needs the limit to be raised on the channel. This must be
591 # shorter than 120 characters. If you use scripts like getops.tcl or
592 # botnetop.tcl, you don't need to set this setting
593 #
594 # flood-chan 10:60
595 # Set here how many channel messages in how many seconds from one
596 # host constitutes a flood. Setting this to 0 or 0:0 disables
597 # flood protection for the channel.
598 #
599 # flood-deop 3:10
600 # Set here how many deops in how many seconds from one host constitutes
601 # a flood. Setting this to 0 or 0:0 disables deop flood protection for
602 # the channel.
603 #
604 # flood-kick 3:10
605 # Set here how many kicks in how many seconds from one host constitutes
606 # a flood. Setting this to 0 or 0:0 disables kick flood protection for
607 # the channel.
608 #
609 # flood-join 5:60
610 # Set here how many joins in how many seconds from one host constitutes
611 # a flood. Setting this to 0 or 0:0 disables join flood protection for
612 # the channel.
613 #
614 # flood-ctcp 3:60
615 # Set here how many channel ctcps in how many seconds from one host
616 # constitutes a flood. Setting this to 0 or 0:0 disables ctcp flood
617 # protection for the channel.
618 #
619 # flood-nick 5:60
620 # Set here how many nick changes in how many seconds from one host
621 # constitutes a flood. Setting this to 0 or 0:0 disables nick flood
622 # protection for the channel.
623 #
624 # There are many different options for channels which you can
625 # define. They can be enabled or disabled using the channel set command by a
626 # plus or minus in front of them.
627 #
628 # channel set #lamest +enforcebans +dynamicbans +userbans +dynamicexempts
629 # channel set #lamest +userexempts +dynamicinvites +userinvites +protectops
630 # channel set #lamest +protectfriends +statuslog +revenge -protecthalfops
631 # channel set #lamest +revengebot +dontkickops +autovoice -autoop -autohalfop
632 # channel set #lamest -bitch -secret -shared +greet +cycle
633 #
634 # A complete list of all available channel settings:
635 #
636 # enforcebans
637 # When a ban is set, kick people who are on the channel and match
638 # the ban?
639 #
640 # dynamicbans
641 # Only activate bans on the channel when necessary? This keeps
642 # the channel's ban list from getting excessively long. The bot
643 # still remembers every ban, but it only activates a ban on the
644 # channel when it sees someone join who matches that ban.
645 #
646 # userbans
647 # Allow bans to be made by users directly? If turned off, the bot
648 # will require all bans to be made through the bot's console.
649 #
650 # dynamicexempts
651 # Only activate exempts on the channel when necessary? This keeps
652 # the channel's exempt list from getting excessively long. The bot
653 # still remembers every exempt, but it only activates a exempt on
654 # the channel when it sees a ban set that matches the exempt. The
655 # exempt remains active on the channel for as long as the ban is
656 # still active.
657 #
658 # userexempts
659 # Allow exempts to be made by users directly? If turned off, the
660 # bot will require all exempts to be made through the bot's console.
661 #
662 # dynamicinvites
663 # Only activate invites on the channel when necessary? This keeps
664 # the channel's invite list from getting excessively long. The bot
665 # still remembers every invite, but the invites are only activated
666 # when the channel is set to invite only and a user joins after
667 # requesting an invite. Once set, the invite remains until the
668 # channel goes to -i.
669 #
670 # userinvites
671 # Allow invites to be made by users directly? If turned off, the
672 # bot will require all invites to be made through the bot's console.
673 #
674 # autoop
675 # Op users with the +o flag as soon as they join the channel?
676 # This is insecure and not recommended.
677 #
678 # autohalfop
679 # Halfop users with the +l flag as soon as they join the channel?
680 # This is insecure and not recommended.
681 #
682 # bitch
683 # Only let users with +o) flag be opped on the channel?
684 #
685 # greet
686 # Say a user's info line when they join the channel?
687 #
688 # protectops
689 # Re-op a user with the +o flag if they get deopped?
690 #
691 # protecthalfops
692 # Re-halfop a user with the +l flag if they get dehalfopped?
693 #
694 # protectfriends
695 # Re-op a user with the +f flag if they get deopped?
696 #
697 # statuslog
698 # Log the channel status line every 5 minutes? This shows the bot's
699 # status on the channel (op, voice, etc.), the channel's modes, and
700 # the number of +m/+o/+v/+n/+b/+e/+I users on the channel. A sample
701 # status line follows:
702 #
703 # [01:40] @#lamest (+istn) : [m/1 o/1 v/4 n/7 b/1 e/5 I/7]
704 #
705 # revenge
706 # Remember people who deop/kick/ban the bot, valid ops, or friends
707 # and punish them? Users with the +f flag are exempt from revenge.
708 #
709 # revengebot
710 # This is similar to to the 'revenge' option, but it only triggers
711 # if a bot gets deopped, kicked or banned.
712 #
713 # autovoice
714 # Voice users with the +v flag when they join the channel?
715 #
716 # secret
717 # Prevent this channel from being listed on the botnet?
718 #
719 # shared
720 # Share channel-related user info for this channel?
721 #
722 # cycle
723 # Cycle the channel when it has no ops?
724 #
725 # dontkickops
726 # Do you want the bot not to be able to kick users who have the +o
727 # flag, letting them kick-flood for instance to protect the channel
728 # against clone attacks.
729 #
730 # inactive
731 # This prevents the bot from joining the channel (or makes it leave
732 # the channel if it is already there). It can be useful to make the
733 # bot leave a channel without losing its settings, channel-specific
734 # user flags, channel bans, and without affecting sharing.
735 #
736 # seen
737 # Respond to seen requests in the channel? The seen module must be
738 # loaded for this to work.
739 #
740 # nodesynch
741 # Allow non-ops to perform channel modes? This can stop the bot from
742 # fighting with services such as ChanServ, or from kicking IRCops when
743 # setting channel modes without having ops.
744 #
745 # Here is a shorter example:
746 #
747 # channel add #botcentral {
748 # chanmode "+mntisl 1"
749 # idle-kick 1
750 # }
751 # channel set #botcentral +bitch +enforcebans -greet +revenge
752
753
754 #### SERVER MODULE ####
755
756 # This module provides the core server support. You have to load this
757 # if you want your bot to come on IRC. Not loading this is equivalent
758 # to the old NO_IRC define.
759 loadmodule server
760
761 # What is your network?
762 # 0 = EFnet (non +e/+I Hybrid)
763 # 1 = IRCnet
764 # 2 = Undernet
765 # 3 = DALnet
766 # 4 = +e/+I Hybrid
767 # 5 = Others
768 set net-type 0
769
770 # Set the nick the bot uses on IRC, and on the botnet unless you specify a
771 # separate botnet-nick, here.
772 set nick "Lamestbot"
773
774 # Set the alternative nick which the bot uses on IRC if the nick specified
775 # by 'set nick' is unavailable. All '?' characters will be replaced by random
776 # numbers.
777 set altnick "Llamab?t"
778
779 # Set what should be displayed in the real-name field for the bot on IRC.
780 set realname "/msg LamestBot hello"
781
782 # This is a Tcl script to be run when connecting to a server.
783 bind event - init-server event:init_server
784
785 proc event:init_server {type} {
786 global botnick
787 putquick "MODE $botnick +i-ws"
788 }
789
790 # Set the default port which should be used if none is specified with
791 # '.jump' or in 'set servers'.
792 set default-port 6667
793
794 # This is the bot's server list. The bot will start at the first server listed,
795 # and cycle through them whenever it gets disconnected. You need to change these
796 # servers to YOUR network's servers.
797 #
798 # The format is:
799 # server[:port[:password]]
800 #
801 # Both the port and password fields are optional; however, if you want to set a
802 # password you must also set a port. If a port isn't specified it will default to
803 # your default-port setting.
804 set servers {
805 you.need.to.change.this:6667
806 another.example.com:7000
807 }
808
809 # This setting makes the bot try to get his original nickname back if its
810 # primary nickname is already in use.
811 set keep-nick 1
812
813 # Set this to 1 if you don't want your the bot to strip a leading '~' on
814 # user@hosts.
815 set strict-host 0
816
817 # This setting makes the bot squelch the error message when rejecting a DCC
818 # CHAT, SEND or message command. Normally, Eggdrop notifies the user that the
819 # command has been rejected because they don't have access. Note that sometimes
820 # IRC server operators detect bots that way.
821 set quiet-reject 1
822
823 # If you want your bot to answer lower case ctcp requests (non rfc-
824 # compliant), set this setting to 1. mIRC will do this, most other
825 # clients will not.
826 set lowercase-ctcp 0
827
828 # Set how many ctcps should be answered at once.
829 set answer-ctcp 3
830
831 # Set here how many msgs in how many seconds from one host constitutes
832 # a flood. If you set this to 0:0, msg flood protection will be disabled.
833 set flood-msg 5:60
834
835 # Set here how many ctcps in how many seconds from one host constitutes
836 # a flood. If you set this to 0:0, ctcp flood protection will be disabled.
837 set flood-ctcp 3:60
838
839 # This settings makes the bot cycle forever through the server list until
840 # it successfully connects to one.
841 set never-give-up 1
842
843 # This setting defines how long Eggdrop should wait before moving from one
844 # server to another on disconnect. If you set 0 here, Eggdrop will not wait
845 # at all and will connect instantly. Setting this too low could result in
846 # your bot being K:Lined.
847 set server-cycle-wait 60
848
849 # Set here how long Eggdrop should wait for a response when connecting to a
850 # server before giving up and moving on to next server.
851 set server-timeout 60
852
853 # If the number of servers on the net gets below this number, the bot
854 # will jump to a new server (it will assume it's on the losing end of
855 # a netsplit). Set this to 0 to turn off. If your bot is running on
856 # any major IRC network, this should probably be turned off.
857 set servlimit 0
858
859 # Set this to 1 if Eggdrop should check for stoned servers? (where the
860 # server connection has died, but Eggdrop hasn't been notified yet).
861 set check-stoned 1
862
863 # If you want your bot to exit the server if it receives an ERROR message,
864 # set this to 1.
865 set serverror-quit 1
866
867 # Set here the maximum number of lines to queue to the server. If you're
868 # going to dump large chunks of text to people over IRC, you will probably
869 # want to raise this. 300 is fine for most people though.
870 set max-queue-msg 300
871
872 # If you want Eggdrop to trigger binds for ignored users, set this to 1.
873 set trigger-on-ignore 0
874
875 # Allow identical messages in the mode queue?
876 set double-mode 0
877
878 # Allow identical messages in the server queue?
879 set double-server 0
880
881 # Allow identical messages in the help queue?
882 set double-help 0
883
884 # This optimizes the kick queue. It also traces nick changes and parts in
885 # the channel and changes the kick queue accordingly. There are three
886 # different options for this setting:
887 # 0 = Turn it off.
888 # 1 = Optimize the kick queue by summarizing kicks.
889 # 2 = Trace nick changes and parts on the channel and change the queue
890 # accordingly. For example, bot will not try to kick users who have
891 # already parted the channel.
892 # ATTENTION: Setting 2 is very CPU intensive.
893 set optimize-kicks 1
894
895 # If your network supports more recipients per command then 1, you can
896 # change this behavior here. Set this to the number of recipients per
897 # command, or set this to 0 for unlimited.
898 set stack-limit 4
899
900 ### SERVER MODULE - OTHER NETWORKS (net-type 5) ###
901
902 # This settings defines how umode +r is understood by Eggdrop. Some networks
903 # use +r to indicate a restricted connection. If this is your case, and you
904 # want your bot to leave restricted servers and jump to the next server on its
905 # list, then set it to 1.
906 #set check-mode-r 1
907
908 # This setting allows you to specify the maximum nick-length supported by your
909 # network. The default setting is 9. The maximum supported length by Eggdrop
910 # is 32.
911 #set nick-len 9
912
913 #### CTCP MODULE ####
914
915 # This module provides the normal ctcp replies that you'd expect.
916 # Without it loaded, CTCP CHAT will not work. The server module
917 # is required for this module to function.
918 loadmodule ctcp
919
920 # Set here how the ctcp module should answer ctcps. There are 3 possible
921 # operating modes:
922 # 0: Normal behavior is used.
923 # 1: The bot ignores all ctcps, except for CHAT and PING requests
924 # by users with the +o flag.
925 # 2: Normal behavior is used, however the bot will not answer more
926 # than X ctcps in Y seconds (defined by 'set flood-ctcp').
927 set ctcp-mode 0
928
929 # There are also several variables to help make your bot less noticeable.
930 # They are: ctcp-version, ctcp-finger, and ctcp-userinfo. You can use set to set
931 # them to values you'd like.
932
933
934 #### IRC MODULE ####
935
936 # This module provides basic IRC support for your bot. You have to
937 # load this if you want your bot to come on IRC. The server and channels
938 # modules must be loaded for this module to function.
939 loadmodule irc
940
941 # Set this to 1 if you want to bounce all server bans.
942 set bounce-bans 1
943
944 # Set this to 1 if you want to bounce all server modes.
945 set bounce-modes 0
946
947 # Set here the maximum number of bans you want the bot to set on a channel.
948 # Eggdrop will not place any more bans if this limit is reached. Undernet
949 # currently allows 45 bans, IRCnet allows 30, EFnet allows 25, and DALnet
950 # allows 100.
951 set max-bans 20
952
953 # There is a global limit for +b/+e/+I modes. This limit should be set to
954 # the same value as max-bans for networks that do not support +e/+I.
955 set max-modes 30
956
957 # Set this to 1 if you want the bot to kick for control character/ctcp
958 # avalanches to a channel. Remember that if it does, it won't ban them.
959 # This can start kick floods.
960 set kick-fun 0
961
962 # Set this to 1 if you want the bot to ban for control character/ctcp
963 # avalanches to a channel. This can prevent kick floods, but it also can
964 # fill the banlist.
965 set ban-fun 0
966
967 # If you want people to be able to add themselves to the bot's userlist
968 # with the default userflags (defined above in the config file) via the
969 # 'hello' msg command, set this to 1.
970 set learn-users 0
971
972 # Set here the time (in seconds) to wait for someone to return from a netsplit
973 # (i.e. wasop will expire afterwards). Set this to 1500 on IRCnet since its
974 # nick delay stops after 30 minutes.
975 set wait-split 600
976
977 # Set here the time (in seconds) that someone must have been off-channel
978 # before re-displaying their info line.
979 set wait-info 180
980
981 # Set this to the maximum number of bytes to send in the arguments
982 # of modes sent to the server. Most servers default this to 200.
983 set mode-buf-length 200
984
985 # Many IRCops find bots by seeing if they reply to 'hello' in a msg.
986 # You can change this to another word by un-commenting the following
987 # two lines and changing "myword" to the word wish to use instead of
988 # 'hello'. It must be a single word.
989 #unbind msg - hello *msg:hello
990 #bind msg - myword *msg:hello
991
992 # Many takeover attempts occur due to lame users blindly /msg ident'ing to
993 # the bot and attempting to guess passwords. We now unbind this command by
994 # default to discourage them. You can enable these commands by commenting the
995 # following two lines.
996 unbind msg - ident *msg:ident
997 unbind msg - addhost *msg:addhost
998
999 # If you are so lame you want the bot to display peoples info lines, even
1000 # when you are too lazy to add their chanrecs to a channel, set this to 1.
1001 # *NOTE* This means *every* user with an info line will have their info
1002 # line displayed on EVERY channel they join (provided they have been gone
1003 # longer than wait-info).
1004 set no-chanrec-info 0
1005
1006 ### IRC MODULE - IRCnet SPECIFIC FEATURES (net-type 1) ###
1007
1008 # Attention: Use these settings *only* if you set 'net-type' to 1!
1009
1010 # Set this to 1 if you want to bounce all server exemptions (+e modes).
1011 # This is disabled is use-exempts is disabled.
1012 set bounce-exempts 0
1013
1014 # Set this to 1 if you want to bounce all server invitations (+I modes).
1015 # This is disabled is use-invites is disabled.
1016 set bounce-invites 0
1017
1018 # Set here the maximum number of exempts you want Eggdrop to set on a channel.
1019 # Eggdrop will not place any more exempts if this limit is reached.
1020 set max-exempts 20
1021
1022 # Set here the maximum number of invites you want Eggdrop to set on a channel.
1023 # Eggdrop will not place any more invites if this limit is reached.
1024 set max-invites 20
1025
1026 # The following settings should be left commented unless the default values
1027 # are being overridden. By default, exempts and invites are on for IRCnet,
1028 # but off for all other large networks. This behavior can be modified with
1029 # the following 2 flags. If your network doesn't support +e/+I modes then you
1030 # will be unable to use these features.
1031 #
1032 # Do you want to enable exempts (+e modes)?
1033 #set use-exempts 0
1034
1035 # Do you want to enable invites (+I modes)?
1036 #set use-invites 0
1037
1038 # At the moment, the current IRCnet IRCd version (2.10) doesn't support the
1039 # mixing of b,o and v modes with e and I modes. This might be changed in the
1040 # future, so use 1 at the moment for this setting.
1041 set prevent-mixing 1
1042
1043 ### IRC MODULE - OTHER NETWORKS (net-type 5) ###
1044
1045 # Attention: Use these settings *only* if you set 'net-type' to 5!
1046
1047 # If your network supports more users per kick command then 1, you can
1048 # change this behavior here. Set this to the number of users to kick at
1049 # once, or set this to 0 for all at once.
1050 #set kick-method 1
1051
1052 # Some networks allow you to stack lots of channel modes into one line.
1053 # They're all guaranteed to support at least 3, so that's the default.
1054 # If you know your network supports more, you may want to adjust this.
1055 # This setting is limited to 6, although if you want to use a higher value,
1056 # you can modify this by changing the value of MODES_PER_LINE_MAX in
1057 # src/chan.h and recompiling the bot.
1058 #set modes-per-line 3
1059
1060 # Some networks don't include the +l limit and +k or -k key modes
1061 # in the modes-per-line (see above) limitation. Set include-lk to 0 for
1062 # these networks.
1063 #set include-lk 1
1064
1065 # Set this to 1 if your network uses IRCu2.10.01 specific /who requests.
1066 # Eggdrop can, therefore, ask only for exactly what's needed.
1067 #set use-354 0
1068
1069 # If your network doesn't use rfc 1459 compliant string matching routines,
1070 # set this to 0.
1071 #set rfc-compliant 1
1072
1073
1074 #### TRANSFER MODULE ####
1075
1076 # The transfer module provides dcc send/get support and userfile transfer
1077 # support for userfile sharing. Un-comment the next line to load it if you
1078 # need this functionality.
1079 #loadmodule transfer
1080
1081 # Set here the maximum number of simultaneous downloads to allow for
1082 # each user.
1083 set max-dloads 3
1084
1085 # Set here the block size for dcc transfers. ircII uses 512 bytes,
1086 # but admits that it may be too small. 1024 is standard these days.
1087 # 0 is turbo-dcc (recommended).
1088 set dcc-block 0
1089
1090 # Enable this setting if you want to copy files into the /tmp directory
1091 # before sending them. This is useful on most systems for file stability,
1092 # but if your directories are NFS mounted, it's a pain, and you'll want
1093 # to set this to 0. If you are low on disk space, you may also want to
1094 # set this to 0.
1095 set copy-to-tmp 1
1096
1097 # Set here the time (in seconds) to wait before an inactive transfer times out.
1098 set xfer-timeout 30
1099
1100
1101 #### SHARE MODULE ####
1102
1103 # This module provides userfile sharing support between two directly
1104 # linked bots. The transfer and channels modules are required for this
1105 # module to correctly function. Un-comment the following line to load
1106 # the share module.
1107 #loadmodule share
1108
1109 # Settings in this section must be un-commented before setting.
1110
1111 # When two bots get disconnected, this setting allows them to create a
1112 # resync buffer which saves all changes done to the userfile during
1113 # the disconnect. When they reconnect, they will not have to transfer
1114 # the complete user file, but, instead, just send the resync buffer.
1115 #
1116 # NOTE: This has been known to cause loss of channel flags and other
1117 # problems. Using this setting is not recommended.
1118 #set allow-resync 0
1119
1120 # This setting specifies how long to hold another bots resync data
1121 # before flushing it.
1122 #set resync-time 900
1123
1124 # When sharing user lists, DON'T ACCEPT global flag changes from other bots?
1125 # NOTE: The bot will still send changes made on the bot, it just won't accept
1126 # any global flag changes from other bots.
1127 #set private-global 0
1128
1129 # When sharing user lists, if private-global isn't set, which global flag
1130 # changes from other bots should be ignored?
1131 #set private-globals "mnot"
1132
1133 # When sharing user lists, don't accept ANY userfile changes from other
1134 # bots? Paranoid people should use this feature on their hub bot. This
1135 # will force all userlist changes to be made via the hub.
1136 #set private-user 0
1137
1138 # This setting makes the bot discard its own bot records in favor of
1139 # the ones sent by the hub.
1140 # NOTE: No passwords or botflags are shared, only ports and
1141 # address are added to sharing procedure. This only works with hubs that
1142 # are v1.5.1 or higher.
1143 #set override-bots 0
1144
1145
1146 #### COMPRESS MODULE ####
1147
1148 # This module provides provides support for file compression. This allows the
1149 # bot to transfer compressed user files and therefore save a significant amount
1150 # of bandwidth. The share module must be loaded to load this module. Un-comment
1151 # the following line to the compress module.
1152 #loadmodule compress
1153
1154 # Allow compressed sending of user files? The user files are compressed with
1155 # the compression level defined in `compress-level'.
1156 set share-compressed 1
1157
1158 # This is the default compression level used.
1159 #set compress-level 9
1160
1161
1162 #### FILESYSTEM MODULE ####
1163
1164 # This module provides an area within the bot where users can store
1165 # files. With this module, the bot is usable as a file server. The
1166 # transfer module is required for this module to function. Un-comment
1167 # the following line to load the filesys module.
1168 #loadmodule filesys
1169
1170 # Set here the 'root' directory for the file system.
1171 set files-path "/home/mydir/filesys"
1172
1173 # If you want to allow uploads, set this to the directory uploads
1174 # should be put into. Set this to "" if you don't want people to
1175 # upload files to your bot.
1176 set incoming-path "/home/mydir/filesys/incoming"
1177
1178 # If you don't want to have a central incoming directory, but instead
1179 # want uploads to go to the current directory that a user is in, set
1180 # this setting to 1.
1181 set upload-to-pwd 0
1182
1183 # Eggdrop creates a '.filedb' file in each subdirectory of your file area
1184 # to keep track of its own file system information. If you can't do that (for
1185 # example, if the dcc path isn't owned by you, or you just don't want it to do
1186 # that) specify a path here where you'd like all of the database files to be
1187 # stored instead.
1188 set filedb-path ""
1189
1190 # Set here the maximum number of people that can be in the file area at once.
1191 # Setting this to 0 makes it effectively infinite.
1192 set max-file-users 20
1193
1194 # Set here the maximum allowable file size that will be received (in kb).
1195 # Setting this to 0 makes it effectively infinite.
1196 set max-filesize 1024
1197
1198
1199 #### NOTES MODULE ####
1200
1201 # This module provides support for storing of notes for users from each other.
1202 # Note sending between currently online users is supported in the core, this is
1203 # only for storing the notes for later retrieval.
1204 loadmodule notes
1205
1206 # Set here the filename where private notes between users are stored.
1207 set notefile "LamestBot.notes"
1208
1209 # Set here the maximum number of notes to allow to be stored for each user
1210 # (to prevent flooding).
1211 set max-notes 50
1212
1213 # Set here how long (in days) to store notes before expiring them.
1214 set note-life 60
1215
1216 # Set this to 1 if you want to allow users to specify a forwarding address
1217 # for forwarding notes to another account on another bot.
1218 set allow-fwd 0
1219
1220 # Set this to 1 if you want the bot to let people know hourly if they have
1221 # any notes.
1222 set notify-users 1
1223
1224 # Set this to 1 if you want the bot to let people know on join if they have
1225 # any notes.
1226 set notify-onjoin 1
1227
1228 # Comment out this next line. Otherwise, your bot won't start.
1229 die "You didn't edit your config file completely like you were told, did you?"
1230
1231
1232 #### CONSOLE MODULE ####
1233
1234 # This module provides storage of console settings when you exit the
1235 # bot or type .store on the partyline.
1236 loadmodule console
1237
1238 # Save users console settings automatically? Otherwise, they have
1239 # to use the .store command.
1240 set console-autosave 1
1241
1242 # If a user doesn't have any console settings saved, which channel
1243 # do you want them automatically put on?
1244 set force-channel 0
1245
1246 # Enable this setting if a user's global info line should be displayed
1247 # when they join a botnet channel.
1248 set info-party 0
1249
1250
1251 #### WOOBIE MODULE ####
1252
1253 # This is for demonstrative purposes only. If you are looking for starting
1254 # point in writing modules, woobie is the right thing.
1255 #loadmodule woobie
1256
1257
1258 #### SEEN MODULE ####
1259
1260 # This module provides very basic seen commands via msg, on channel or via dcc.
1261 # This module works only for users in the bot's userlist. If you are looking for
1262 # a better and more advanced seen module, try the gseen module by G'Quann. You
1263 # can find it at http://www.visions-of-fantasy.de/gseen.mod/.
1264 #loadmodule seen
1265
1266
1267 #### BLOWFISH MODULE ####
1268
1269 # IF YOU DON'T READ THIS YOU MAY RENDER YOUR USERFILE USELESS LATER
1270 # Eggdrop encrypts its userfile, so users can have secure passwords.
1271 # Please note that when you change your encryption method later (i.e.
1272 # using other modules like a md5 module), you can't use your current
1273 # userfile anymore. Eggdrop will not start without an encryption module.
1274 #loadmodule blowfish
1275
1276
1277 #### ASSOC MODULE ####
1278
1279 # This module provides assoc support, i.e. naming channels on the botnet.
1280 # You can load it by un-commenting the following line.
1281 #loadmodule assoc
1282
1283
1284 #### WIRE MODULE ####
1285
1286 # This module provides all the standard .wire commands via dcc. It is an
1287 # encrypted partyline communication tool, compatible with wire.tcl. An
1288 # encryption module must be loaded to use this module. Un-comment the
1289 # following line to load the wire module.
1290 #loadmodule wire
1291
1292 #### UPTIME MODULE ####
1293
1294 # This module reports uptime statistics to http://uptime.eggheads.org.
1295 # Go look and see what your uptime is! It takes about 9 hours to show up,
1296 # so if your bot isn't listed, try again later. The server module must be
1297 # loaded for this module to function.
1298 #
1299 # Information sent to the server includes the bot's uptime, botnet-nick,
1300 # server, version, and IP address. This information is stored in a temporary
1301 # logfile for debugging purposes only. The only publicly available information
1302 # will be the bot's botnet-nick, version and uptime. If you do not wish for this
1303 # information to be sent, comment out the following line.
1304 loadmodule uptime
1305
1306 ##### SCRIPTS #####
1307
1308 # This is a good place to load scripts to use with your bot.
1309
1310 # This line loads script.tcl from the scripts directory inside your Eggdrop's
1311 # directory. All scripts should be put there, although you can place them where
1312 # you like as long as you can supply a fully qualified path to them.
1313 #
1314 # source scripts/script.tcl
1315
1316 source scripts/alltools.tcl
1317 source scripts/action.fix.tcl
1318
1319 # Use this script for Tcl and Eggdrop downwards compatibility.
1320 # NOTE: This can also cause problems with some newer scripts.
1321 source scripts/compat.tcl
1322
1323 # This script provides many useful informational functions, like setting
1324 # users' URLs, e-mail address, ICQ numbers, etc. You can modify it to add
1325 # extra entries.
1326 source scripts/userinfo.tcl
1327 loadhelp userinfo.help

webmaster@eggheads.org
ViewVC Help
Powered by ViewVC 1.1.23