/[cvs]/eggdrop1.6/eggdrop.conf
ViewVC logotype

Contents of /eggdrop1.6/eggdrop.conf

Parent Directory Parent Directory | Revision Log Revision Log | View Revision Graph Revision Graph


Revision 1.15 - (show annotations) (download)
Thu Jan 30 00:41:24 2003 UTC (16 years, 4 months ago) by wcc
Branch: MAIN
Changes since 1.14: +67 -61 lines
* Config file/doc updates.
* Changed EFnet's max-bans/max-modes to 25.

1 #! /path/to/executable/eggdrop
2 # ^- This should contain a fully qualified path to your Eggdrop executable.
3 #
4 # $Id: eggdrop.conf,v 1.14 2003/01/28 23:14:50 wcc Exp $
5 #
6 # This is a sample Eggdrop configuration file which includes all possible
7 # settings that can be used to configure your bot.
8 #
9 # The pound signs (#) that you see at the beginning of some lines mean that
10 # the remainder of that line is a comment, or just for your information. By
11 # adding or deleting pound signs, you can comment or uncomment a setting,
12 # respectively.
13 #
14 # Arguments for a command or setting may be inclosed in <>'s or []'s in the
15 # example/description. Arguments in <>'s are required, while [] means optional.
16 #
17 # More detailed descriptions of all these settings can be found in
18 # doc/settings/.
19
20
21 ##### BASIC SETTINGS #####
22
23 # This setting defines the username the bot uses on IRC. This setting has
24 # no effect if an ident daemon is running on your bot's machine.
25 set username "lamest"
26
27 # This setting defines which contact person should be shown in .status,
28 # /msg help, and other places. You really should include this information.
29 set admin "Lamer <email: lamer@lamest.lame.org>"
30
31 # This setting is used only for info to share with others on your botnet.
32 # Set this to the IRC network your bot is connected to.
33 set network "I.didn't.edit.my.config.file.net"
34
35 # This setting defines the timezone is your bot in. It's used for internal
36 # routines as well as for logfile timestamping and scripting purposes.
37 # The timezone string specifies the name of the timezone and must be three
38 # or more alphabetic characters. For example, Central European Time(UTC+1)
39 # should be "CET".
40 set timezone "EST"
41
42 # The offset setting specifies the time value to be added to the local
43 # time to get Coordinated Universal Time (UTC aka GMT). The offset is
44 # positive if the local timezone is west of the Prime Meridian and
45 # negative if it is east. The value (in hours) must be between -23 and
46 # 23. For example, if the timezone is UTC+1, the offset is -1.
47 set offset "5"
48
49 # If you don't want to use the timezone setting for scripting purposes only,
50 # but instead everywhere possible, un-comment the following line.
51 #set env(TZ) "$timezone $offset"
52
53 # If you're using virtual hosting (your machine has more than 1 IP), you
54 # may want to specify the particular IP to bind to. You can specify either
55 # by hostname or by IP. You may also want to set the hostname here if
56 # Eggdrop has trouble detecting it when it starts up.
57 #set my-hostname "virtual.host.com"
58 #set my-ip "99.99.0.0"
59
60 # If you want to have your Eggdrop messages displayed in a language other
61 # than English, change this setting to match your preference. An alternative
62 # would be to set the environment variable EGG_LANG to that value.
63 #addlang "english"
64
65
66 ##### LOG FILES #####
67
68 # Eggdrop is capable of logging various things, from channel chatter to
69 # commands people use on the bot and file transfers. Logfiles are normally
70 # kept for 24 hours. Afterwards, they will be renamed to "(logfile).yesterday".
71 # After 48 hours, they will be overwritten by the logfile of the next day.
72 #
73 # Events are logged by certain categories. This way, you can specify
74 # exactly what kind of events you want sent to various logfiles.
75 #
76 # Logfile flags:
77 # b - information about bot linking and userfile sharing
78 # c - commands
79 # d - misc debug information
80 # h - raw share traffic
81 # j - joins, parts, quits, and netsplits on the channel
82 # k - kicks, bans, and mode changes on the channel
83 # m - private msgs, notices and ctcps to the bot
84 # o - misc info, errors, etc (IMPORTANT STUFF)
85 # p - public text on the channel
86 # r - raw incoming server traffic
87 # s - server connects, disconnects, and notices
88 # t - raw botnet traffic
89 # v - raw outgoing server traffic
90 # w - wallops (make sure the bot sets +w in init-server)
91 # x - file transfers and file-area commands
92 #
93 # Note that modes d, h, r, t, and v can fill disk quotas quickly. There are
94 # also eight user-defined levels (1-8) which can be used by Tcl scripts.
95 #
96 # Each logfile belongs to a certain channel. Events of type 'k', 'j', and 'p'
97 # are logged to whatever channel they happened on. Most other events are
98 # currently logged to every channel. You can make a logfile belong to all
99 # channels by assigning it to channel "*".
100
101 # This is the maximum number of logfiles allowed. This setting can be
102 # increased; however, don't decrease it.
103 set max-logs 5
104
105 # This is the maximum size of your logfiles. Set it to 0 to disable.
106 # This value is in kilobytes, so '550' would mean cycle logs when it
107 # reaches the size of 550 kilobytes. Note that this only works if you
108 # have keep-all-logs 0 (OFF).
109 set max-logsize 0
110
111 # This could be good if you have had problem with the logfile filling
112 # your quota/hard disk or if you log +p and publish it to the web and
113 # need more up-to-date info. Note that this setting might increase the
114 # CPU usage of your bot (on the other hand it will decrease your mem usage).
115 set quick-logs 0
116
117 # This setting allows you the logging of all information received from the
118 # server via console mode 'r'.
119 # NOTE: This is a large security hole, allowing people to see user passwords.
120 # This is now restricted to +n users only. Please choose your owners with
121 # care.
122 set use-console-r 0
123
124 # This setting allows you the logging of all information sent to the server
125 # via console/log mode 'v'. It also allows logging of botnet traffic via
126 # console/log mode 't', and share traffic via console/log mode 'h'.
127 # NOTE: This is a large security hole, allowing people to see passwords.
128 # This is now restricted to +n users only. Please choose your owners with
129 # care.
130 set debug-output 0
131
132 # This creates a logfile named eggdrop.log containing private msgs/ctcps,
133 # commands, errors, and misc. info from any channel.
134 logfile mco * "logs/eggdrop.log"
135
136 # This creates a logfile named lamest.log containing joins, parts,
137 # netsplits, kicks, bans, mode changes, and public chat on the
138 # channel #lamest.
139 logfile jpk #lamest "logs/lamest.log"
140
141 # Use this feature to timestamp entries in the log file.
142 set log-time 1
143
144 # If you want to keep your logfiles forever, turn this setting on. All
145 # logfiles will get suffix ".[day, 2 digits][month, 3 letters][year, 4 digits]".
146 # Note that your quota/hard-disk might be filled by this, so check your
147 # logfiles often and download them.
148 set keep-all-logs 0
149
150 # If keep-all-logs is 1, this setting will define the suffix of the logfiles.
151 # The default will result in a suffix like "04May2000". "%Y%m%d" will produce
152 # the often used yyyymmdd format. Read the strftime manpages for more options.
153 # NOTE: On systems which don't support strftime, the default format will
154 # be used _always_.
155 set logfile-suffix ".%d%b%Y"
156
157 # You can specify when Eggdrop should switch logfiles and start fresh. You
158 # must use military time for this setting. 300 is the default, and describes
159 # 03:00 (AM).
160 set switch-logfiles-at 300
161
162 # "Writing user file..." and "Writing channel file..." messages won't be
163 # logged anymore if this option is enabled.
164 set quiet-save 0
165
166
167 ##### CONSOLE #####
168
169 # This is the default console mode. It uses the same event flags as the log
170 # files do. The console channel is automatically set to your "primary" channel,
171 # which is set in the modules section of the config file. Masters can change
172 # their console channel and modes with the '.console' command.
173
174 set console "mkcobxs"
175
176
177 ##### FILES AND DIRECTORIES #####
178
179 # Specify here the filename your userfile should be saved as.
180 set userfile "LamestBot.user"
181
182 # Specify here the filename Eggdrop will save its pid to. If no pidfile is
183 # specified, pid.(botnet-nick) will be used.
184 #set pidfile "pid.LamestBot"
185
186 # If you want your userfile to be sorted upon saving, enable this setting.
187 # This causes the bot to use bit more CPU when saving the usefile.
188 set sort-users 0
189
190 # Specify here where Eggdrop should look for help files. Don't modify this
191 # setting unless you know what you're doing!
192 set help-path "help/"
193
194 # Specify here where Eggdrop should look for text files. This is used for
195 # certain Tcl and DCC commands.
196 set text-path "text/"
197
198 # Set here a place to store temporary files.
199 set temp-path "/tmp"
200
201 # The MOTD (Message Of The day) is displayed when people dcc chat or telnet
202 # to the bot. Look at doc/text-substitutions.doc for options.
203 set motd "text/motd"
204
205 # This banner will be displayed on telnet connections. Look at
206 # doc/text-substitutions.doc for options.
207 set telnet-banner "text/banner"
208
209 # This specifies what permissions the user, channel, and notes files should
210 # be set to. The octal values are the same as for the chmod system command.
211 #
212 # To remind you:
213 #
214 # u g o u g o u g o
215 # 0600 rw------- 0400 r-------- 0200 -w------- u - user
216 # 0660 rw-rw---- 0440 r--r----- 0220 -w--w---- g - group
217 # 0666 rw-rw-rw- 0444 r--r--r-- 0222 -w--w--w- o - others
218 #
219 # Note that the default 0600 is the most secure one and should only be changed
220 # if you need your files for shell scripting or other external applications.
221 set userfile-perm 0600
222
223
224 ##### BOTNET/DCC/TELNET #####
225
226 # Settings in this section should be unimportant for you until you deal
227 # with botnets (multiple Eggdrops connected together to maximize efficiency).
228 # You should read doc/BOTNET before modifying these settings.
229
230 # If you want to use a different nickname on the botnet than you use on
231 # IRC (i.e. if you're on an un-trusted botnet), un-comment the next line
232 # and set it to the nick you would like to use.
233 #set botnet-nick "LlamaBot"
234
235 # This opens a telnet port by which you and other bots can
236 # interact with the Eggdrop by telneting in.
237 #
238 # There are more options for the listen command in doc/tcl-commands.doc.
239 # Note, if you are running more than one bot on the same machine, you will
240 # want to space the telnet ports at LEAST 5 apart. 10 is even better.
241 #
242 # Valid ports are typically anything between 1025 and 65535 assuming the
243 # port is not already in use.
244 #
245
246 # If you would like the bot to listen for users and bots in separate ports,
247 # use the following format.
248 #
249 # listen 3333 bots
250 # listen 4444 users
251 #
252 # If you wish to use only one port, use this format:
253 listen 3333 all
254
255 # This setting defines whether or not people can boot users on the Eggdrop
256 # from other bots in your botnet. Valid settings are:
257 # 0 - allow *no* outside boots
258 # 1 - allow boots from sharebots
259 # 2 - allow any boots
260 set remote-boots 2
261
262 # This setting prohibits remote bots from telling your Eggdrop to unlink from
263 # share bots.
264 set share-unlinks 1
265
266 # This setting will drop telnet connections not matching a known host. It
267 # greatly improves protection from IRCops, but makes it impossible to add
268 # hosts on limbo (NOIRC) bots or have NEW as a valid login.
269 set protect-telnet 0
270
271 # This setting will make the bot ignore DCC chat requests which appear to
272 # have bogus information on the grounds that the user may have been trying
273 # to make the bot connect to somewhere that will get it into trouble, or
274 # that the user has a broken client (like mIRC tends to do), in which case
275 # the connect wouldn't work anyway. It's suggested that you turn this on.
276 set dcc-sanitycheck 0
277
278 # This settings defines a time in seconds that the bot should wait before
279 # a dcc chat, telnet, or relay connection times out.
280 set ident-timeout 5
281
282 # Define here whether or not a +o user still needs the +p flag to dcc the bot.
283 set require-p 0
284
285 # If you want people allow to telnet in and type 'NEW' to become a new user,
286 # set this to 1. This is similar to the 'hello' msg command. The protect-telnet
287 # setting must be set to 0 to use this.
288 set open-telnets 0
289
290 # If you don't want Eggdrop to identify itself as an eggdrop on a telnet
291 # connection, set this setting to 1. Eggdrop will display 'Nickname' instead.
292 set stealth-telnets 0
293
294 # If you want Eggdrop to display a banner when telneting in, set this setting
295 # to 1. The telnet banner is set by 'set telnet-banner'.
296 set use-telnet-banner 0
297
298 # This settings defines a time in seconds that the bot should wait before
299 # a dcc chat, telnet, or relay connection times out.
300 set connect-timeout 15
301
302 # Specify here the number of lines to accept from a user on the partyline
303 # within 10 seconds before they are considered to be flooding and therefore
304 # get booted.
305 set dcc-flood-thr 3
306
307 # Define here how many telnet connection attempts in how many seconds from
308 # the same host constitute a flood. The correct format is Attempts:Seconds.
309 set telnet-flood 5:60
310
311 # If you want telnet-flood to apply even to +f users, set this setting to 1.
312 set paranoid-telnet-flood 1
313
314 # Set here the amount of seconds before giving up on hostname/address
315 # lookup (you might want to increase this if you are on a slow network).
316 set resolve-timeout 15
317
318
319 ##### MORE ADVANCED SETTINGS #####
320
321 # Set this to your socks host if your Eggdrop sits behind a firewall. If
322 # you use a Sun "telnet passthru" firewall, prefix the host with a '!'.
323 #set firewall "!sun-barr.ebay:3666"
324
325 # If you have a NAT firewall (you box has an IP in one of the following
326 # ranges: 192.168.0.0-192.168.255.255, 172.16.0.0-172.31.255.255,
327 # 10.0.0.0-10.255.255.255 and your firewall transparently changes your
328 # address to a unique address for your box) or you have IP masquerading
329 # between you and the rest of the world, and /dcc chat, /ctcp chat or
330 # userfile sharing aren't working, enter your outside IP here. Do not
331 # enter anything for my-ip or my-hostname if you use this setting.
332 #set nat-ip "127.0.0.1"
333
334 # If you want all dcc file transfers to use a particular portrange either
335 # because you're behind a firewall, or for other security reasons, set it
336 # here.
337 #set reserved-portrange 2010:2020
338
339 # Set the time in minutes that temporary ignores should last.
340 set ignore-time 15
341
342 # Define here what Eggdrop considers 'hourly'. All calls to it, including such
343 # things as note notifying or userfile saving, are affected by this.
344 # For example:
345 #
346 # set hourly-updates 15
347 #
348 # The bot will save its userfile 15 minutes past every hour.
349 set hourly-updates 00
350
351 # Un-comment the next line and set the list of owners of the bot.
352 # You NEED to change this setting.
353 #set owner "MrLame, MrsLame"
354
355 # Who should a note be sent to when new users are learned?
356 set notify-newusers "$owner"
357
358 # Enter the flags that all new users should get by default. See '.help whois'
359 # on the partyline for a list of flags and their descriptions.
360 set default-flags "hp"
361
362 # Enter all user-defined fields that should be displayed in a '.whois'.
363 # This will only be shown if the user has one of these extra fields.
364 # You might prefer to comment this out and use the userinfo1.0.tcl script
365 # which provides commands for changing all of these.
366 set whois-fields "url birthday"
367
368 # Enable this setting if you want your Eggdrop to die upon receiving a SIGHUP
369 # kill signal. Otherwise, the Eggdrop will just save its userfile and rehash.
370 set die-on-sighup 0
371
372 # Enable this setting if you want your Eggdrop to die upon receiving a SIGTERM
373 # kill signal. Otherwise, the Eggdrop will just save its userfile and rehash.
374 set die-on-sigterm 1
375
376 # Comment these two lines if you wish to enable the .tcl and .set commands.
377 # If you select your owners wisely, you should be okay enabling these.
378 unbind dcc n tcl *dcc:tcl
379 unbind dcc n set *dcc:set
380
381 # If you enable this setting, only permanent owners (owner setting) will be
382 # able to use .tcl and .set. Moreover, if you want only let permanent owners
383 # use .dump, then set this to 2.
384 set must-be-owner 1
385
386 # Comment out this line to add the 'simul' partyline command (owners can
387 # manipulate other people on the party line). Please select owners wisely
388 # and use this command ethically!
389 unbind dcc n simul *dcc:simul
390
391 # Set here the maximum number of dcc connections you will allow. You can
392 # increase this later, but never decrease it.
393 set max-dcc 50
394
395 # Enable this setting if you want to enable the 'dccsimul' Tcl command.
396 set enable-simul 1
397
398 # Enable this setting if you want +d & +k users to use commands bound as -|-.
399 set allow-dk-cmds 1
400
401 # If your Eggdrop rejects bots that actually have already disconnected from
402 # another hub, but the disconnect information has not yet spread over the
403 # botnet due to lag, use this setting. The bot will wait dupwait-timeout
404 # seconds before it checks again and then finally reject the bot.
405 set dupwait-timeout 5
406
407 # You MUST remove this line for your bot to start. This has been added to
408 # prevent you from starting up a bot that is not fully configured. Bots
409 # that have not been fully configured may join the wrong IRC network, the
410 # wrong channels, or generally do things that you do not want. Please make
411 # sure that you have double-checked every setting. There's also a similar line
412 # lower down, just to make sure you're reading :)
413 die "Please make sure you edit your config file completely."
414
415
416 ##### MODULES #####
417
418 # Below are various settings for the modules included with Eggdrop.
419 # PLEASE READ AND EDIT THEM CAREFULLY, even if you're an old hand at
420 # Eggdrop, things change.
421
422 # This path specifies the path were Eggdrop should look for its modules.
423 # If you run the bot from the compilation directory, you will want to set
424 # this to "". If you use 'make install' (like all good kiddies do ;), this
425 # is a fine default. Otherwise, use your head :)
426 set mod-path "modules/"
427
428
429 #### DNS MODULE ####
430
431 # This module provides asynchronous dns support. This will avoid long
432 # periods where the bot just hangs there, waiting for a hostname to
433 # resolve, which will often let it timeout on all other connections.
434 loadmodule dns
435
436
437 #### CHANNELS MODULE ####
438
439 # This module provides channel related support for the bot. Without it,
440 # you won't be able to make the bot join a channel or save channel
441 # specific userfile information.
442 loadmodule channels
443
444 # Enter here the filename where dynamic channel settings are stored.
445 set chanfile "LamestBot.chan"
446
447 # Set this setting to 1 if you want your bot to expire bans/exempts/invites set
448 # by other opped bots on the channel.
449 set force-expire 0
450
451 # Set this setting to 1 if you want your bot to share user greets with other
452 # bots on the channel if sharing user data.
453 set share-greet 0
454
455 # Set this setting to 1 if you want to allow users to store an info line.
456 set use-info 1
457
458 # The following settings are used as default values when you .+chan #chan or .tcl
459 # channel add #chan. Look in the section below for explanation of every option.
460
461 set global-flood-chan 10:60
462 set global-flood-deop 3:10
463 set global-flood-kick 3:10
464 set global-flood-join 5:60
465 set global-flood-ctcp 3:60
466 set global-flood-nick 5:60
467 set global-aop-delay 5:30
468 set global-idle-kick 0
469 set global-chanmode "nt"
470 set global-stopnethack-mode 0
471 set global-revenge-mode 0
472 set global-ban-time 120
473 set global-exempt-time 60
474 set global-invite-time 60
475
476 set global-chanset {
477 -autoop -autovoice
478 -bitch +cycle
479 +dontkickops +dynamicbans
480 +dynamicexempts +dynamicinvites
481 -enforcebans +greet
482 -inactive -nodesynch
483 -protectfriends +protectops
484 -revenge -revengebot
485 -secret -seen
486 +shared +statuslog
487 +userbans +userexempts
488 +userinvites -protecthalfops
489 -autohalfop
490 }
491
492 # Add each static channel you want your bot to sit in using the following
493 # command. There are many different possible settings you can insert into
494 # this command, which are explained below.
495 #
496 # channel add #lamest {
497 # chanmode "+nt-likm"
498 # idle-kick 0
499 # stopnethack-mode 0
500 # revenge-mode 0
501 # ban-time 120
502 # exempt-time 60
503 # invite-time 60
504 # aop-delay 5:30
505 # need-op { putserv "PRIVMSG #lamest :op me cos i'm lame!" }
506 # need-invite { putserv "PRIVMSG #lamest :let me in!" }
507 # need-key { putserv "PRIVMSG #lamest :let me in!" }
508 # need-unban { putserv "PRIVMSG #lamest :let me in!" }
509 # need-limit { putserv "PRIVMSG #lamest :let me in!" }
510 # flood-chan 10:60
511 # flood-deop 3:10
512 # flood-kick 3:10
513 # flood-join 5:60
514 # flood-ctcp 3:60
515 # flood-nick 5:60
516 # }
517 #
518 # chanmode +/-<modes>
519 # This setting makes the bot enforce channel modes. It will always add
520 # the +<modes> and remove the -<modes> modes.
521 # idle-kick 0
522 # This setting will make the bot check every minute for idle
523 # users. Set this to 0 to disable idle check.
524 #
525 # stopnethack-mode 0
526 # This setting will make the bot de-op anyone who enters the channel
527 # with serverops. There're seven different modes for this settings:
528 # 0 turn off,
529 # 1 isoptest (allow serverop if registered op)
530 # 2 wasoptest (allow serverop if op before split)
531 # 3 allow serverop if isop or wasop
532 # 4 allow serverop if isop and wasop.
533 # 5 If the channel is -bitch, see stopnethack-mode 3
534 # If the channel is +bitch, see stopnethack-mode 1
535 # 6 If the channel is -bitch, see stopnethack-mode 2
536 # If the channel is +bitch, see stopnethack-mode 4
537 #
538 # revenge-mode 0
539 # This settings defines how the bot should punish bad users when
540 # revenging. There are four possible settings:
541 # 0 Deop the user.
542 # 1 Deop the user and give them the +d flag for the channel.
543 # 2 Deop the user, give them the +d flag for the channel, and kick them.
544 # 3 Deop the user, give them the +d flag for the channel, kick, and ban them.
545 #
546 # ban-time 120
547 # Set here how long temporary bans will last (in minutes). If you
548 # set this setting to 0, the bot will never remove them.
549 #
550 # exempt-time 60
551 # Set here how long temporary exempts will last (in minutes). If you
552 # set this setting to 0, the bot will never remove them. The bot will
553 # check the exempts every X minutes, but will not remove the exempt if
554 # a ban is set on the channel that matches that exempt. Once the ban is
555 # removed, then the exempt will be removed the next time the bot checks.
556 # Please note that this is an IRCnet feature.
557 #
558 # invite-time 60
559 # Set here how long temporary invites will last (in minutes). If you
560 # set this setting to 0, the bot will never remove them. The bot will
561 # check the invites every X minutes, but will not remove the invite if
562 # a channel is set to +i. Once the channel is -i then the invite will be
563 # removed the next time the bot checks. Please note that this is an IRCnet
564 # feature.
565 #
566 # aop-delay (minimum:maximum)
567 # This is used for autoop, autohalfop, autovoice. If an op or voice joins a
568 # channel while another op or voice is pending, the bot will attempt to put
569 # both modes on one line.
570 # aop-delay 0 No delay is used.
571 # aop-delay X An X second delay is used.
572 # aop-delay X:Y A random delay between X and Y is used.
573 #
574 # need-op { putserv "PRIVMSG #lamest :op me cos i'm lame!" }
575 # This setting will make the bot run the script enclosed in brackets
576 # if it does not have ops. This must be shorter than 120 characters.
577 # If you use scripts like getops.tcl or botnetop.tcl, you don't need
578 # to set this setting.
579 #
580 # need-invite { putserv "PRIVMSG #lamest :let me in!" }
581 # This setting will make the bot run the script enclosed in brackets
582 # if it needs an invite to the channel. This must be shorter than 120
583 # characters. If you use scripts like getops.tcl or botnetop.tcl, you
584 # don't need to set this setting.
585 #
586 # need-key { putserv "PRIVMSG #lamest :let me in!" }
587 # This setting will make the bot run the script enclosed in brackets
588 # if it needs the key to the channel. This must be shorter than 120
589 # characters. If you use scripts like getops.tcl or botnetop.tcl, you
590 # don't need to set this setting
591 #
592 # need-unban { putserv "PRIVMSG #lamest :let me in!" }
593 # This setting will make the bot run the script enclosed in brackets
594 # if it needs to be unbanned on the channel. This must be shorter than
595 # 120 characters. If you use scripts like getops.tcl or botnetop.tcl,
596 # you don't need to set this setting
597 #
598 # need-limit { putserv "PRIVMSG #lamest :let me in!" }
599 # This setting will make the bot run the script enclosed in brackets
600 # if it needs the limit to be raised on the channel. This must be
601 # shorter than 120 characters. If you use scripts like getops.tcl or
602 # botnetop.tcl, you don't need to set this setting
603 #
604 # flood-chan 10:60
605 # Set here how many channel messages in how many seconds from one
606 # host constitutes a flood. Setting this to 0 or 0:0 disables
607 # flood protection for the channel.
608 #
609 # flood-deop 3:10
610 # Set here how many deops in how many seconds from one host constitutes
611 # a flood. Setting this to 0 or 0:0 disables deop flood protection for
612 # the channel.
613 #
614 # flood-kick 3:10
615 # Set here how many kicks in how many seconds from one host constitutes
616 # a flood. Setting this to 0 or 0:0 disables kick flood protection for
617 # the channel.
618 #
619 # flood-join 5:60
620 # Set here how many joins in how many seconds from one host constitutes
621 # a flood. Setting this to 0 or 0:0 disables join flood protection for
622 # the channel.
623 #
624 # flood-ctcp 3:60
625 # Set here how many channel ctcps in how many seconds from one host
626 # constitutes a flood. Setting this to 0 or 0:0 disables ctcp flood
627 # protection for the channel.
628 #
629 # flood-nick 5:60
630 # Set here how many nick changes in how many seconds from one host
631 # constitutes a flood. Setting this to 0 or 0:0 disables nick flood
632 # protection for the channel.
633 #
634 # There are many different options for channels which you can
635 # define. They can be enabled or disabled using the channel set command by a
636 # plus or minus in front of them.
637 #
638 # channel set #lamest +enforcebans +dynamicbans +userbans +dynamicexempts
639 # channel set #lamest +userexempts +dynamicinvites +userinvites +protectops
640 # channel set #lamest +protectfriends +statuslog +revenge -protecthalfops
641 # channel set #lamest +revengebot +dontkickops +autovoice -autoop -autohalfop
642 # channel set #lamest -bitch -secret -shared +greet +cycle
643 #
644 # A complete list of all available channel settings:
645 #
646 # enforcebans
647 # When a ban is set, kick people who are on the channel and match
648 # the ban?
649 #
650 # dynamicbans
651 # Only activate bans on the channel when necessary? This keeps
652 # the channel's ban list from getting excessively long. The bot
653 # still remembers every ban, but it only activates a ban on the
654 # channel when it sees someone join who matches that ban.
655 #
656 # userbans
657 # Allow bans to be made by users directly? If turned off, the bot
658 # will require all bans to be made through the bot's console.
659 #
660 # dynamicexempts
661 # Only activate exempts on the channel when necessary? This keeps
662 # the channel's exempt list from getting excessively long. The bot
663 # still remembers every exempt, but it only activates a exempt on
664 # the channel when it sees a ban set that matches the exempt. The
665 # exempt remains active on the channel for as long as the ban is
666 # still active.
667 #
668 # userexempts
669 # Allow exempts to be made by users directly? If turned off, the
670 # bot will require all exempts to be made through the bot's console.
671 #
672 # dynamicinvites
673 # Only activate invites on the channel when necessary? This keeps
674 # the channel's invite list from getting excessively long. The bot
675 # still remembers every invite, but the invites are only activated
676 # when the channel is set to invite only and a user joins after
677 # requesting an invite. Once set, the invite remains until the
678 # channel goes to -i.
679 #
680 # userinvites
681 # Allow invites to be made by users directly? If turned off, the
682 # bot will require all invites to be made through the bot's console.
683 #
684 # autoop
685 # Op users with the +o flag as soon as they join the channel?
686 # This is insecure and not recommended.
687 #
688 # autohalfop
689 # Halfop users with the +l flag as soon as they join the channel?
690 # This is insecure and not recommended.
691 #
692 # bitch
693 # Only let users with +o) flag be opped on the channel?
694 #
695 # greet
696 # Say a user's info line when they join the channel?
697 #
698 # protectops
699 # Re-op a user with the +o flag if they get deopped?
700 #
701 # protecthalfops
702 # Re-halfop a user with the +l flag if they get dehalfopped?
703 #
704 # protectfriends
705 # Re-op a user with the +f flag if they get deopped?
706 #
707 # statuslog
708 # Log the channel status line every 5 minutes? This shows the bot's
709 # status on the channel (op, voice, etc.), The channel's modes, and
710 # the number of +m/+o/+v/+n/+b/+e/+I users on the channel. A sample
711 # status line follows:
712 #
713 # [01:40] @#lamest (+istn) : [m/1 o/1 v/4 n/7 b/1 e/5 I/7]
714 #
715 # revenge
716 # Remember people who deop/kick/ban the bot, valid ops, or friends
717 # and punish them? Users with the +f flag are exempt from revenge.
718 #
719 # revengebot
720 # This is similar to to the 'revenge' option, but it only triggers
721 # if a bot gets deopped, kicked or banned.
722 #
723 # autovoice
724 # Voice users with the +v flag when they join the channel?
725 #
726 # secret
727 # Prevent this channel from being listed on the botnet?
728 #
729 # shared
730 # Share channel-related user info for this channel?
731 #
732 # cycle
733 # Cycle the channel when it has no ops?
734 #
735 # dontkickops
736 # Do you want the bot not to be able to kick users who have the +o
737 # flag, letting them kick-flood for instance to protect the channel
738 # against clone attacks.
739 #
740 # inactive
741 # This prevents the bot from joining the channel (or makes it leave
742 # the channel if it is already there). It can be useful to make the
743 # bot leave a channel without losing its settings, channel-specific
744 # user flags, channel bans, and without affecting sharing.
745 #
746 # seen
747 # Respond to seen requests in the channel? The seen module must be
748 # loaded for this to work.
749 #
750 # nodesynch
751 # Allow non-ops to perform channel modes? This can stop the bot from
752 # fighting with services such as ChanServ, or from kicking IRCops when
753 # setting channel modes without having ops.
754 #
755 # Here is a shorter example:
756 #
757 # channel add #botcentral {
758 # chanmode "+mntisl 1"
759 # idle-kick 1
760 # }
761 # channel set #botcentral +bitch +enforcebans -greet +revenge
762
763
764 #### SERVER MODULE ####
765
766 # This module provides the core server support. You have to load this
767 # if you want your bot to come on IRC. Not loading this is equivalent
768 # to the old NO_IRC define.
769 loadmodule server
770
771 # What is your network?
772 # 0 = EFnet (non +e/+I Hybrid)
773 # 1 = IRCnet
774 # 2 = Undernet
775 # 3 = DALnet
776 # 4 = +e/+I Hybrid
777 # 5 = Others
778 set net-type 0
779
780 # Set the nick the bot uses on IRC, and on the botnet unless you specify a
781 # separate botnet-nick, here.
782 set nick "Lamestbot"
783
784 # Set the alternative nick which the bot uses on IRC if the nick specified
785 # by 'set nick' is unavailable. All '?' characters will be replaced by random
786 # numbers.
787 set altnick "Llamab?t"
788
789 # Set what should be displayed in the real-name field for the bot on IRC.
790 set realname "/msg LamestBot hello"
791
792 # This is a Tcl script to be run when connecting to a server.
793 bind event - init-server event:init_server
794
795 proc event:init_server {type} {
796 global botnick
797 putquick "MODE $botnick +i-ws"
798 }
799
800 # Set the default port which should be used if none is specified with
801 # '.jump' or in 'set servers'.
802 set default-port 6667
803
804 # This is the bot's server list. The bot will start at the first server listed,
805 # and cycle through them whenever it gets disconnected. You need to change these
806 # servers to YOUR network's servers.
807 #
808 # The format is:
809 # server[:port[:password]]
810 #
811 # Both the port and password fields are optional; however, if you want to set a
812 # password you must also set a port. If a port isn't specified it will default to
813 # your default-port setting.
814 set servers {
815 you.need.to.change.this:6667
816 another.example.com:7000
817 }
818
819 # This setting makes the bot try to get his original nickname back if its
820 # primary nickname is already in use.
821 set keep-nick 1
822
823 # Set this to 1 if you don't want your the bot to strip a leading '~' on
824 # user@hosts.
825 set strict-host 0
826
827 # This setting makes the bot squelch the error message when rejecting a DCC
828 # CHAT, SEND or message command. Normally, Eggdrop notifies the user that the
829 # command has been rejected because they don't have access. Note that sometimes
830 # IRC server operators detect bots that way.
831 set quiet-reject 1
832
833 # If you want your bot to answer lower case ctcp requests (non rfc-
834 # compliant), set this setting to 1. mIRC will do this, most other
835 # clients will not.
836 set lowercase-ctcp 0
837
838 # Set how many ctcps should be answered at once.
839 set answer-ctcp 3
840
841 # Set here how many msgs in how many seconds from one host constitutes
842 # a flood. If you set this to 0:0, msg flood protection will be disabled.
843 set flood-msg 5:60
844
845 # Set here how many ctcps in how many seconds from one host constitutes
846 # a flood. If you set this to 0:0, ctcp flood protection will be disabled.
847 set flood-ctcp 3:60
848
849 # This settings makes the bot cycle forever through the server list until
850 # it successfully connects to one.
851 set never-give-up 1
852
853 # This setting defines how long Eggdrop should wait before moving from one
854 # server to another on disconnect. If you set 0 here, Eggdrop will not wait
855 # at all and will connect instantly. Setting this too low could result in
856 # your bot being K:Lined.
857 set server-cycle-wait 60
858
859 # Set here how long Eggdrop should wait for a response when connecting to a
860 # server before giving up and moving on to next server.
861 set server-timeout 60
862
863 # If the number of servers on the net gets below this number, the bot
864 # will jump to a new server (it will assume it's on the losing end of
865 # a netsplit). Set this to 0 to turn off. If your bot is running on
866 # any major IRC network, this should probably be turned off.
867 set servlimit 0
868
869 # Set this to 1 if Eggdrop should check for stoned servers? (where the
870 # server connection has died, but Eggdrop hasn't been notified yet).
871 set check-stoned 1
872
873 # If you want your bot to exit the server if it receives an ERROR message,
874 # set this to 1.
875 set serverror-quit 1
876
877 # Set here the maximum number of lines to queue to the server. If you're
878 # going to dump large chunks of text to people over IRC, you will probably
879 # want to raise this. 300 is fine for most people though.
880 set max-queue-msg 300
881
882 # If you want Eggdrop to trigger binds for ignored users, set this to 1.
883 set trigger-on-ignore 0
884
885 # Allow identical messages in the mode queue?
886 set double-mode 0
887
888 # Allow identical messages in the server queue?
889 set double-server 0
890
891 # Allow identical messages in the help queue?
892 set double-help 0
893
894 # This optimizes the kick queue. It also traces nick changes and parts in
895 # the channel and changes the kick queue accordingly. There are three
896 # different options for this setting:
897 # 0 = Turn it off.
898 # 1 = Optimize the kick queue by summarizing kicks.
899 # 2 = Trace nick changes and parts on the channel and change the queue
900 # accordingly. For example, bot will not try to kick users who have
901 # already parted the channel.
902 # ATTENTION: Setting 2 is very CPU intensive.
903 set optimize-kicks 1
904
905 # If your network supports more recipients per command then 1, you can
906 # change this behavior here. Set this to the number of recipients per
907 # command, or set this to 0 for unlimited.
908 set stack-limit 4
909
910 ### SERVER MODULE - OTHER NETWORKS (net-type 5) ###
911
912 # This settings defines how umode +r is understood by Eggdrop. Some networks
913 # use +r to indicate a restricted connection. If this is your case, and you
914 # want your bot to leave restricted servers and jump to the next server on its
915 # list, then set it to 1.
916 #set check-mode-r 1
917
918 # This setting allows you to specify the maximum nick-length supported by your
919 # network. The default setting is 9. The maximum supported length by Eggdrop
920 # is 32.
921 #set nick-len 9
922
923 #### CTCP MODULE ####
924
925 # This module provides the normal ctcp replies that you'd expect.
926 # Without it loaded, CTCP CHAT will not work. The server module
927 # is required for this module to function.
928 loadmodule ctcp
929
930 # Set here how the ctcp module should answer ctcps. There are 3 possible
931 # operating modes:
932 # 0: Normal behavior is used.
933 # 1: The bot ignores all ctcps, except for CHAT and PING requests
934 # by users with the +o flag.
935 # 2: Normal behavior is used, however the bot will not answer more
936 # than X ctcps in Y seconds (defined by 'set flood-ctcp').
937 set ctcp-mode 0
938
939 # There are also several variables to help make your bot less noticeable.
940 # They are: ctcp-version, ctcp-finger, and ctcp-userinfo. You can use set to set
941 # them to values you'd like.
942
943
944 #### IRC MODULE ####
945
946 # This module provides basic IRC support for your bot. You have to
947 # load this if you want your bot to come on IRC. The server and channels
948 # modules must be loaded for this module to function.
949 loadmodule irc
950
951 # Set this to 1 if you want to bounce all server bans.
952 set bounce-bans 1
953
954 # Set this to 1 if you want to bounce all server modes.
955 set bounce-modes 0
956
957 # Set here the maximum number of bans you want the bot to set on a channel.
958 # Eggdrop will not place any more bans if this limit is reached. Undernet
959 # currently allows 45 bans, IRCnet allows 30, EFnet allows 25, and DALnet
960 # allows 100.
961 set max-bans 20
962
963 # There is a global limit for +b/+e/+I modes. This limit should be set to
964 # the same value as max-bans for networks that do not support +e/+I.
965 set max-modes 30
966
967 # Set this to 1 if you want the bot to kick for control character/ctcp
968 # avalanches to a channel. Remember that if it does, it won't ban them.
969 # This can start kick floods.
970 set kick-fun 0
971
972 # Set this to 1 if you want the bot to ban for control character/ctcp
973 # avalanches to a channel. This can prevent kick floods, but it also can
974 # fill the banlist.
975 set ban-fun 0
976
977 # If you want people to be able to add themselves to the bot's userlist
978 # with the default userflags (defined above in the config file) via the
979 # 'hello' msg command, set this to 1.
980 set learn-users 0
981
982 # Set here the time (in seconds) to wait for someone to return from a netsplit
983 # (i.e. wasop will expire afterwards). Set this to 1500 on IRCnet since its
984 # nick delay stops after 30 minutes.
985 set wait-split 600
986
987 # Set here the time (in seconds) that someone must have been off-channel
988 # before re-displaying their info line.
989 set wait-info 180
990
991 # Set this to the maximum number of bytes to send in the arguments
992 # of modes sent to the server. Most servers default this to 200.
993 set mode-buf-length 200
994
995 # Many IRCops find bots by seeing if they reply to 'hello' in a msg.
996 # You can change this to another word by un-commenting the following
997 # two lines and changing "myword" to the word wish to use instead of
998 # 'hello'. It must be a single word.
999 #unbind msg - hello *msg:hello
1000 #bind msg - myword *msg:hello
1001
1002 # Many takeover attempts occur due to lame users blindly /msg ident'ing to
1003 # the bot and attempting to guess passwords. We now unbind this command by
1004 # default to discourage them. You can enable these commands by commenting the
1005 # following two lines.
1006 unbind msg - ident *msg:ident
1007 unbind msg - addhost *msg:addhost
1008
1009 # If you are so lame you want the bot to display peoples info lines, even
1010 # when you are too lazy to add their chanrecs to a channel, set this to 1.
1011 # *NOTE* This means *every* user with an info line will have their info
1012 # line displayed on EVERY channel they join (provided they have been gone
1013 # longer than wait-info).
1014 set no-chanrec-info 0
1015
1016 ### IRC MODULE - IRCnet SPECIFIC FEATURES (net-type 1) ###
1017
1018 # Attention: Use these settings *only* if you set 'net-type' to 1!
1019
1020 # Set this to 1 if you want to bounce all server exemptions (+e modes).
1021 # This is disabled is use-exempts is disabled.
1022 set bounce-exempts 0
1023
1024 # Set this to 1 if you want to bounce all server invitations (+I modes).
1025 # This is disabled is use-invites is disabled.
1026 set bounce-invites 0
1027
1028 # Set here the maximum number of exempts you want Eggdrop to set on a channel.
1029 # Eggdrop will not place any more exempts if this limit is reached.
1030 set max-exempts 20
1031
1032 # Set here the maximum number of invites you want Eggdrop to set on a channel.
1033 # Eggdrop will not place any more invites if this limit is reached.
1034 set max-invites 20
1035
1036 # The following settings should be left commented unless the default values
1037 # are being overridden. By default, exempts and invites are on for IRCnet,
1038 # but off for all other large networks. This behavior can be modified with
1039 # the following 2 flags. If your network doesn't support +e/+I modes then you
1040 # will be unable to use these features.
1041 #
1042 # Do you want to enable exempts (+e modes)?
1043 #set use-exempts 0
1044
1045 # Do you want to enable invites (+I modes)?
1046 #set use-invites 0
1047
1048 # At the moment, the current IRCnet IRCd version (2.10) doesn't support the
1049 # mixing of b,o and v modes with e and I modes. This might be changed in the
1050 # future, so use 1 at the moment for this setting.
1051 set prevent-mixing 1
1052
1053 ### IRC MODULE - OTHER NETWORKS (net-type 5) ###
1054
1055 # Attention: Use these settings *only* if you set 'net-type' to 5!
1056
1057 # If your network supports more users per kick command then 1, you can
1058 # change this behavior here. Set this to the number of users to kick at
1059 # once, or set this to 0 for all at once.
1060 #set kick-method 1
1061
1062 # Some networks allow you to stack lots of channel modes into one line.
1063 # They're all guaranteed to support at least 3, so that's the default.
1064 # If you know your network supports more, you may want to adjust this.
1065 # This setting is limited to 6, although if you want to use a higher value,
1066 # you can modify this by changing the value of MODES_PER_LINE_MAX in
1067 # src/chan.h and recompiling the bot.
1068 #set modes-per-line 3
1069
1070 # Some networks don't include the +l limit and +k or -k key modes
1071 # in the modes-per-line (see above) limitation. Set include-lk to 0 for
1072 # these networks.
1073 #set include-lk 1
1074
1075 # Set this to 1 if your network uses IRCu2.10.01 specific /who requests.
1076 # Eggdrop can, therefore, ask only for exactly what's needed.
1077 #set use-354 0
1078
1079 # If your network doesn't use rfc 1459 compliant string matching routines,
1080 # set this to 0.
1081 #set rfc-compliant 1
1082
1083
1084 #### TRANSFER MODULE ####
1085
1086 # The transfer module provides dcc send/get support and userfile transfer
1087 # support for userfile sharing. Un-comment the next line to load it if you
1088 # need this functionality.
1089 #loadmodule transfer
1090
1091 # Set here the maximum number of simultaneous downloads to allow for
1092 # each user.
1093 set max-dloads 3
1094
1095 # Set here the block size for dcc transfers. ircII uses 512 bytes,
1096 # but admits that it may be too small. 1024 is standard these days.
1097 # 0 is turbo-dcc (recommended).
1098 set dcc-block 0
1099
1100 # Enable this setting if you want to copy files into the /tmp directory
1101 # before sending them. This is useful on most systems for file stability,
1102 # but if your directories are NFS mounted, it's a pain, and you'll want
1103 # to set this to 0. If you are low on disk space, you may also want to
1104 # set this to 0.
1105 set copy-to-tmp 1
1106
1107 # Set here the time (in seconds) to wait before an inactive transfer times out.
1108 set xfer-timeout 30
1109
1110
1111 #### SHARE MODULE ####
1112
1113 # This module provides userfile sharing support between two directly
1114 # linked bots. The transfer and channels modules are required for this
1115 # module to correctly function. Un-comment the following line to load
1116 # the share module.
1117 #loadmodule share
1118
1119 # Settings in this section must be un-commented before setting.
1120
1121 # When two bots get disconnected, this setting allows them to create a
1122 # resync buffer which saves all changes done to the userfile during
1123 # the disconnect. When they reconnect, they will not have to transfer
1124 # the complete user file, but, instead, just send the resync buffer.
1125 #
1126 # NOTE: This has been known to cause loss of channel flags and other
1127 # problems. Using this setting is not recommended.
1128 #set allow-resync 0
1129
1130 # This setting specifies how long to hold another bots resync data
1131 # before flushing it.
1132 #set resync-time 900
1133
1134 # When sharing user lists, DON'T ACCEPT global flag changes from other bots?
1135 # NOTE: The bot will still send changes made on the bot, it just won't accept
1136 # any global flag changes from other bots.
1137 #set private-global 0
1138
1139 # When sharing user lists, if private-global isn't set, which global flag
1140 # changes from other bots should be ignored?
1141 #set private-globals "mnot"
1142
1143 # When sharing user lists, don't accept ANY userfile changes from other
1144 # bots? Paranoid people should use this feature on their hub bot. This
1145 # will force all userlist changes to be made via the hub.
1146 #set private-user 0
1147
1148 # This setting makes the bot discard its own bot records in favor of
1149 # the ones sent by the hub.
1150 # NOTE: No passwords or botflags are shared, only ports and
1151 # address are added to sharing procedure. This only works with hubs that
1152 # are v1.5.1 or higher.
1153 #set override-bots 0
1154
1155
1156 #### COMPRESS MODULE ####
1157
1158 # This module provides provides support for file compression. This allows the
1159 # bot to transfer compressed user files and therefore save a significant amount
1160 # of bandwidth. The share module must be loaded to load this module. Un-comment
1161 # the following line to the compress module.
1162 #loadmodule compress
1163
1164 # Allow compressed sending of user files? The user files are compressed with
1165 # the compression level defined in `compress-level'.
1166 set share-compressed 1
1167
1168 # This is the default compression level used.
1169 #set compress-level 9
1170
1171
1172 #### FILESYSTEM MODULE ####
1173
1174 # This module provides an area within the bot where users can store
1175 # files. With this module, the bot is usable as a file server. The
1176 # transfer module is required for this module to function. Un-comment
1177 # the following line to load the filesys module.
1178 #loadmodule filesys
1179
1180 # Set here the 'root' directory for the file system.
1181 set files-path "/home/mydir/filesys"
1182
1183 # If you want to allow uploads, set this to the directory uploads
1184 # should be put into. Set this to "" if you don't want people to
1185 # upload files to your bot.
1186 set incoming-path "/home/mydir/filesys/incoming"
1187
1188 # If you don't want to have a central incoming directory, but instead
1189 # want uploads to go to the current directory that a user is in, set
1190 # this setting to 1.
1191 set upload-to-pwd 0
1192
1193 # Eggdrop creates a '.filedb' file in each subdirectory of your file area
1194 # to keep track of its own file system information. If you can't do that (for
1195 # example, if the dcc path isn't owned by you, or you just don't want it to do
1196 # that) specify a path here where you'd like all of the database files to be
1197 # stored instead.
1198 set filedb-path ""
1199
1200 # Set here the maximum number of people that can be in the file area at once.
1201 # Setting this to 0 makes it effectively infinite.
1202 set max-file-users 20
1203
1204 # Set here the maximum allowable file size that will be received (in kb).
1205 # Setting this to 0 makes it effectively infinite.
1206 set max-filesize 1024
1207
1208
1209 #### NOTES MODULE ####
1210
1211 # This module provides support for storing of notes for users from each other.
1212 # Note sending between currently online users is supported in the core, this is
1213 # only for storing the notes for later retrieval.
1214 loadmodule notes
1215
1216 # Set here the filename where private notes between users are stored.
1217 set notefile "LamestBot.notes"
1218
1219 # Set here the maximum number of notes to allow to be stored for each user
1220 # (to prevent flooding).
1221 set max-notes 50
1222
1223 # Set here how long (in days) to store notes before expiring them.
1224 set note-life 60
1225
1226 # Set this to 1 if you want to allow users to specify a forwarding address
1227 # for forwarding notes to another account on another bot.
1228 set allow-fwd 0
1229
1230 # Set this to 1 if you want the bot to let people know hourly if they have
1231 # any notes.
1232 set notify-users 1
1233
1234 # Set this to 1 if you want the bot to let people know on join if they have
1235 # any notes.
1236 set notify-onjoin 1
1237
1238 # Comment out this next line. Otherwise, your bot won't start.
1239 die "You didn't edit your config file completely like you were told, did you?"
1240
1241
1242 #### CONSOLE MODULE ####
1243
1244 # This module provides storage of console settings when you exit the
1245 # bot or type .store on the partyline.
1246 loadmodule console
1247
1248 # Save users console settings automatically? Otherwise, they have
1249 # to use the .store command.
1250 set console-autosave 1
1251
1252 # If a user doesn't have any console settings saved, which channel
1253 # do you want them automatically put on?
1254 set force-channel 0
1255
1256 # Enable this setting if a user's global info line should be displayed
1257 # when they join a botnet channel.
1258 set info-party 0
1259
1260
1261 #### WOOBIE MODULE ####
1262
1263 # This is for demonstrative purposes only. If you are looking for starting
1264 # point in writing modules, woobie is the right thing.
1265 #loadmodule woobie
1266
1267
1268 #### SEEN MODULE ####
1269
1270 # This module provides very basic seen commands via msg, on channel or via dcc.
1271 # This module works only for users in the bot's userlist. If you are looking for
1272 # a better and more advanced seen module, try the gseen module by G'Quann. You
1273 # can find it at http://www.visions-of-fantasy.de/gseen.mod/.
1274 #loadmodule seen
1275
1276
1277 #### BLOWFISH MODULE ####
1278
1279 # IF YOU DON'T READ THIS YOU MAY RENDER YOUR USERFILE USELESS LATER
1280 # Eggdrop encrypts its userfile, so users can have secure passwords.
1281 # Please note that when you change your encryption method later (i.e.
1282 # using other modules like a md5 module), you can't use your current
1283 # userfile anymore. Eggdrop will not start without an encryption module.
1284 #loadmodule blowfish
1285
1286
1287 #### ASSOC MODULE ####
1288
1289 # This module provides assoc support, i.e. naming channels on the botnet.
1290 # You can load it by un-commenting the following line.
1291 #loadmodule assoc
1292
1293
1294 #### WIRE MODULE ####
1295
1296 # This module provides all the standard .wire commands via dcc. It is an
1297 # encrypted partyline communication tool, compatible with wire.tcl. An
1298 # encryption module must be loaded to use this module. Un-comment the
1299 # following line to load the wire module.
1300 #loadmodule wire
1301
1302 #### UPTIME MODULE ####
1303
1304 # This module reports uptime statistics to http://uptime.eggheads.org.
1305 # Go look and see what your uptime is! It takes about 9 hours to show up,
1306 # so if your bot isn't listed, try again later. The server module must be
1307 # loaded for this module to function.
1308 #
1309 # Information sent to the server includes the bot's uptime, botnet-nick,
1310 # server, version, and IP address. This information is stored in a temporary
1311 # logfile for debugging purposes only. The only publicly available information
1312 # will be the bot's botnet-nick, version and uptime. If you do not wish for this
1313 # information to be sent, comment out the following line.
1314 loadmodule uptime
1315
1316 ##### SCRIPTS #####
1317
1318 # This is a good place to load scripts to use with your bot.
1319
1320 # This line loads script.tcl from the scripts directory inside your Eggdrop's
1321 # directory. All scripts should be put there, although you can place them where
1322 # you like as long as you can supply a fully qualified path to them.
1323 #
1324 # source scripts/script.tcl
1325
1326 source scripts/alltools.tcl
1327 source scripts/action.fix.tcl
1328
1329 # Use this script for Tcl and Eggdrop downwards compatibility.
1330 # NOTE: This can also cause problems with some newer scripts.
1331 source scripts/compat.tcl
1332
1333 # This script provides many useful informational functions, like setting
1334 # users' URLs, e-mail address, ICQ numbers, etc. You can modify it to add
1335 # extra entries.
1336 source scripts/userinfo.tcl
1337 loadhelp userinfo.help

webmaster@eggheads.org
ViewVC Help
Powered by ViewVC 1.1.23