/[cvs]/eggdrop1.6/eggdrop.conf
ViewVC logotype

Contents of /eggdrop1.6/eggdrop.conf

Parent Directory Parent Directory | Revision Log Revision Log | View Revision Graph Revision Graph


Revision 1.13 - (show annotations) (download)
Tue Jan 28 07:52:08 2003 UTC (16 years, 2 months ago) by wcc
Branch: MAIN
Changes since 1.12: +23 -18 lines
Moved debug-output and use-console-r to the logging section of the config
file and updated config documentation. Found by Tothwolf.

1 #! /path/to/executable/eggdrop
2 # ^- This should contain a fully qualified path to your Eggdrop executable.
3 #
4 # $Id: eggdrop.conf,v 1.12 2003/01/28 06:37:24 wcc Exp $
5 #
6 # This is a sample Eggdrop configuration file which includes all possible
7 # settings that can be used to configure your bot.
8 #
9 # The pound signs (#) that you see at the beginning of some lines mean that
10 # the remainder of that line is a comment, or just for your information. By
11 # adding or deleting pound signs, you can comment or uncomment a setting,
12 # respectively.
13 #
14 # More detailed descriptions of all these settings can be found in
15 # doc/settings/.
16
17
18 ##### BASIC SETTINGS #####
19
20 # This setting defines the username the bot uses on IRC. This setting has
21 # no effect if an ident daemon is running on your bot's machine.
22 set username "lamest"
23
24 # This setting defines which contact person should be shown in .status,
25 # /msg help, and other places. You really should include this information.
26 set admin "Lamer <email: lamer@lamest.lame.org>"
27
28 # This setting is used only for info to share with others on your botnet.
29 # Set this to the IRC network your bot is connected to.
30 set network "I.didn't.edit.my.config.file.net"
31
32 # This setting defines the timezone is your bot in. It's used for internal
33 # routines as well as for logfile timestamping and scripting purposes.
34 # The timezone string specifies the name of the timezone and must be three
35 # or more alphabetic characters. For example, Central European Time(UTC+1)
36 # should be "CET".
37 set timezone "EST"
38
39 # The offset setting specifies the time value to be added to the local
40 # time to get Coordinated Universal Time (UTC aka GMT). The offset is
41 # positive if the local timezone is west of the Prime Meridian and
42 # negative if it is east. The value (in hours) must be between -23 and
43 # 23. For example, if the timezone is UTC+1, the offset is -1.
44 set offset "5"
45
46 # If you don't want to use the timezone setting for scripting purposes only,
47 # but instead everywhere possible, un-comment the following line.
48 #set env(TZ) "$timezone $offset"
49
50 # If you're using virtual hosting (your machine has more than 1 IP), you
51 # may want to specify the particular IP to bind to. You can specify either
52 # by hostname or by IP. You may also want to set the hostname here if
53 # Eggdrop has trouble detecting it when it starts up.
54 #set my-hostname "virtual.host.com"
55 #set my-ip "99.99.0.0"
56
57 # If you want to have your Eggdrop messages displayed in a language other
58 # than English, change this setting to match your preference. An alternative
59 # would be to set the environment variable EGG_LANG to that value.
60 #addlang "english"
61
62
63 ##### LOG FILES #####
64
65 # Eggdrop is capable of logging various things, from channel chatter to
66 # commands people use on the bot and file transfers. Logfiles are normally
67 # kept for 24 hours. Afterwards, they will be renamed to "(logfile).yesterday".
68 # After 48 hours, they will be overwritten by the logfile of the next day.
69 #
70 # Events are logged by certain categories. This way, you can specify
71 # exactly what kind of events you want sent to various logfiles.
72 #
73 # The most common log file flags are:
74 # m private msgs/ctcps to the bot
75 # k kicks, bans, mode changes on the channel
76 # j joins, parts, netsplits on the channel
77 # p public chatter on the channel
78 # s server connects/disconnects/notices
79 # b information about bot linking and userfile sharing
80 # c commands people use (via msg or dcc)
81 # x file transfers and file-area commands
82 # o other: misc info, errors -- IMPORTANT STUFF
83 # w wallops: msgs between IRCops (be sure to set the bot +w in init-server)
84 # Other log modes (note that these modes can generate huge logfiles and quickly
85 # fill disk quotas):
86 # r raw incoming server traffic
87 # v raw outgoing server traffic
88 # t raw botnet traffic
89 # h raw share traffic
90 #
91 # There are others, but you probably shouldn't log them, it'd be rather
92 # unethical. ;) There are also eight user-defined levels (1-8) which
93 # are used by Tcl scripts.
94 #
95 # Each logfile belongs to a certain channel. Events of type 'k', 'j', and 'p'
96 # are logged to whatever channel they happened on. Most other events are
97 # currently logged to every channel. You can make a logfile belong to all
98 # channels by assigning it to channel "*".
99
100 # This is the maximum number of logfiles allowed. This setting can be
101 # increased; however, don't decrease it.
102 set max-logs 10
103
104 # This is the maximum size of your logfiles. Set it to 0 to disable.
105 # This value is in kilobytes, so '550' would mean cycle logs when it
106 # reaches the size of 550 kilobytes. Note that this only works if you
107 # have keep-all-logs 0 (OFF).
108 set max-logsize 0
109
110 # This could be good if you have had problem with the logfile filling
111 # your quota/hard disk or if you log +p and publish it to the web and
112 # need more up-to-date info. Note that this setting might increase the
113 # CPU usage of your bot (on the other hand it will decrease your mem usage).
114 set quick-logs 0
115
116 # This setting allows you the logging of all information received from the
117 # server via console mode 'r'.
118 # NOTE: This is a large security hole, allowing people to see user passwords.
119 # This is now restricted to +n users only. Please choose your owners with
120 # care.
121 set use-console-r 0
122
123 # This setting allows you the logging of all information sent to the server
124 # via console/log mode 'v'. It also allows logging of botnet traffic via
125 # console/log mode 't', and share traffic via console/log mode 'h'.
126 # NOTE: This is a large security hole, allowing people to see passwords.
127 # This is now restricted to +n users only. Please choose your owners with
128 # care.
129 set debug-output 0
130
131 # This creates a logfile named eggdrop.log containing private msgs/ctcps,
132 # commands, errors, and misc. info from any channel.
133 logfile mco * "logs/eggdrop.log"
134
135 # This creates a logfile named lamest.log containing joins, parts,
136 # netsplits, kicks, bans, mode changes, and public chat on the
137 # channel #lamest.
138 logfile jpk #lamest "logs/lamest.log"
139
140 # Use this feature to timestamp entries in the log file.
141 set log-time 1
142
143 # If you want to keep your logfiles forever, turn this setting on. All
144 # logfiles will get suffix ".[day, 2 digits][month, 3 letters][year, 4 digits]".
145 # Note that your quota/hard-disk might be filled by this, so check your logfiles
146 # often and download them.
147 set keep-all-logs 0
148
149 # If keep-all-logs is 1, this setting will define the suffix of the logfiles.
150 # The default will result in a suffix like "04May2000". "%Y%m%d" will produce
151 # the often used yyyymmdd format. Read the strftime manpages for more options.
152 # NOTE: On systems which don't support strftime, the default format will
153 # be used _always_.
154 set logfile-suffix ".%d%b%Y"
155
156 # You can specify when Eggdrop should switch logfiles and start fresh. You
157 # must use military time for this setting. 300 is the default, and describes
158 # 03:00 (AM).
159 set switch-logfiles-at 300
160
161 # "Writing user file..." and "Writing channel file..." messages won't be
162 # logged anymore if this option is enabled.
163 set quiet-save 0
164
165
166 ##### CONSOLE #####
167
168 # This is the default console mode. It uses the same event flags as the log
169 # files do. The console channel is automatically set to your "primary" channel,
170 # which is set in the modules section of the config file. Masters can change
171 # their console channel and modes with the '.console' command.
172
173 set console "mkcobxs"
174
175
176 ##### FILES AND DIRECTORIES #####
177
178 # Specify here the filename your userfile should be saved as.
179 set userfile "LamestBot.user"
180
181 # Specify here the filename Eggdrop will save its pid to. If no pidfile is
182 # specified, pid.(botnet-nick) will be used.
183 #set pidfile "pid.LamestBot"
184
185 # If you want your userfile to be sorted upon saving, enable this setting.
186 # This causes the bot to use bit more CPU when saving the usefile.
187 set sort-users 0
188
189 # Specify here where Eggdrop should look for help files. Don't modify this
190 # setting unless you know what you're doing!
191 set help-path "help/"
192
193 # Specify here where Eggdrop should look for text files. This is used for
194 # certain Tcl and DCC commands.
195 set text-path "text/"
196
197 # Set here a place to store temporary files.
198 set temp-path "/tmp"
199
200 # The MOTD (Message Of The day) is displayed when people dcc chat or telnet
201 # to the bot. Look at doc/text-substitutions.doc for options.
202 set motd "text/motd"
203
204 # This banner will be displayed on telnet connections. Look at
205 # doc/text-substitutions.doc for options.
206 set telnet-banner "text/banner"
207
208 # This specifies what permissions the user, channel, and notes files should
209 # be set to. The octal values are the same as for the chmod system command.
210 #
211 # To remind you:
212 #
213 # u g o u g o u g o
214 # 0600 rw------- 0400 r-------- 0200 -w------- u - user
215 # 0660 rw-rw---- 0440 r--r----- 0220 -w--w---- g - group
216 # 0666 rw-rw-rw- 0444 r--r--r-- 0222 -w--w--w- o - others
217 #
218 # Note that the default 0600 is the most secure one and should only be changed
219 # if you need your files for shell scripting or other external applications.
220 set userfile-perm 0600
221
222
223 ##### BOTNET/DCC/TELNET #####
224
225 # Settings in this section should be unimportant for you until you deal
226 # with botnets (multiple Eggdrops connected together to maximize efficiency).
227 # You should read doc/BOTNET before modifying these settings.
228
229 # If you want to use a different nickname on the botnet than you use on
230 # IRC (i.e. if you're on an un-trusted botnet), un-comment the next line
231 # and set it to the nick you would like to use.
232 #set botnet-nick "LlamaBot"
233
234 # This opens a telnet port by which you and other bots can
235 # interact with the Eggdrop by telneting in.
236 #
237 # There are more options for the listen command in doc/tcl-commands.doc.
238 # Note, if you are running more than one bot on the same machine, you will
239 # want to space the telnet ports at LEAST 5 apart. 10 is even better.
240 #
241 # Valid ports are typically anything between 1025 and 65535 assuming the
242 # port is not already in use.
243 #
244
245 # If you would like the bot to listen for users and bots in separate ports,
246 # use the following format.
247 #
248 # listen 3333 bots
249 # listen 4444 users
250 #
251 # If you wish to use only one port, use this format:
252 listen 3333 all
253
254 # This setting defines whether or not people can boot users on the Eggdrop
255 # from other bots in your botnet. Valid settings are:
256 # 0 - allow *no* outside boots
257 # 1 - allow boots from sharebots
258 # 2 - allow any boots
259 set remote-boots 2
260
261 # This setting prohibits remote bots from telling your Eggdrop to unlink from
262 # share bots.
263 set share-unlinks 1
264
265 # This setting will drop telnet connections not matching a known host. It
266 # greatly improves protection from IRCops, but makes it impossible to add
267 # hosts on limbo (NOIRC) bots or have NEW as a valid login.
268 set protect-telnet 0
269
270 # This setting will make the bot ignore DCC chat requests which appear to
271 # have bogus information on the grounds that the user may have been trying
272 # to make the bot connect to somewhere that will get it into trouble, or
273 # that the user has a broken client (like mIRC tends to do), in which case
274 # the connect wouldn't work anyway. It's suggested that you turn this on.
275 set dcc-sanitycheck 0
276
277 # This settings defines a time in seconds that the bot should wait before
278 # a dcc chat, telnet, or relay connection times out.
279 set ident-timeout 5
280
281 # Define here whether or not a +o user still needs the +p flag to dcc the bot.
282 set require-p 0
283
284 # If you want people allow to telnet in and type 'NEW' to become a new user,
285 # set this to 1. This is similar to the 'hello' msg command. The protect-telnet
286 # setting must be set to 0 to use this.
287 set open-telnets 0
288
289 # If you don't want Eggdrop to identify itself as an eggdrop on a telnet connection,
290 # set this setting to 1. Eggdrop will display 'Nickname' instead.
291 set stealth-telnets 0
292
293 # If you want Eggdrop to display a banner when telneting in, set this setting
294 # to 1. The telnet banner is set by 'set telnet-banner'.
295 set use-telnet-banner 0
296
297 # This settings defines a time in seconds that the bot should wait before
298 # a dcc chat, telnet, or relay connection times out.
299 set connect-timeout 15
300
301 # Specify here the number of lines to accept from a user on the partyline
302 # within 10 seconds before they are considered to be flooding and therefore
303 # get booted.
304 set dcc-flood-thr 3
305
306 # Define here how many telnet connection attempts in how many seconds from
307 # the same host constitute a flood. The correct format is Attempts:Seconds.
308 set telnet-flood 5:60
309
310 # If you want telnet-flood to apply even to +f users, set this setting to 1.
311 set paranoid-telnet-flood 1
312
313 # Set here the amount of seconds before giving up on hostname/address
314 # lookup (you might want to increase this if you are on a slow network).
315 set resolve-timeout 15
316
317
318 ##### MORE ADVANCED SETTINGS #####
319
320 # Set this to your socks host if your Eggdrop sits behind a firewall.
321 # If you use a Sun "telnet passthru" firewall, use this setting:
322 #set firewall "!sun-barr.ebay:3666"
323
324 # If you have a NAT firewall (you box has an IP in one of the following
325 # ranges: 192.168.0.0-192.168.255.255, 172.16.0.0-172.31.255.255,
326 # 10.0.0.0-10.255.255.255 and your firewall transparently changes your
327 # address to a unique address for your box) or you have IP masquerading
328 # between you and the rest of the world, and /dcc chat,/ctcp chat or
329 # userfile sharing aren't working, enter your outside IP here. Do not
330 # enter anything for my-ip or my-hostname if you use this setting.
331 #set nat-ip "127.0.0.1"
332
333 # If you want all dcc file transfers to use a particular portrange either
334 # because you're behind a firewall, or for other security reasons, set it
335 # here.
336 #set reserved-portrange 2010:2020
337
338 # Set the time in minutes that temporary ignores should last.
339 set ignore-time 15
340
341 # Define here what Eggdrop considers 'hourly'. All calls to it, including such
342 # things as note notifying or userfile saving, are affected by this. For example:
343 #
344 # set hourly-updates 15
345 #
346 # The bot will save its userfile 15 minutes past every hour.
347 set hourly-updates 00
348
349 # Un-comment the next line and set the list of owners of the bot.
350 # You NEED to change this setting.
351 #set owner "MrLame, MrsLame"
352
353 # Who should a note be sent to when new users are learned?
354 set notify-newusers "$owner"
355
356 # Enter the flags that all new users should get by default. See '.help whois'
357 # on the partyline for a list of flags and their descriptions.
358 set default-flags "hp"
359
360 # Enter all user-defined fields that should be displayed in a '.whois'.
361 # This will only be shown if the user has one of these extra fields.
362 # You might prefer to comment this out and use the userinfo1.0.tcl script
363 # which provides commands for changing all of these.
364 set whois-fields "url birthday"
365
366 # Enable this setting if you want your Eggdrop to die upon receiving a SIGHUP
367 # kill signal. Otherwise, the Eggdrop will just save its userfile and rehash.
368 set die-on-sighup 0
369
370 # Enable this setting if you want your Eggdrop to die upon receiving a SIGTERM
371 # kill signal. Otherwise, the Eggdrop will just save its userfile and rehash.
372 set die-on-sigterm 1
373
374 # Comment these two lines if you wish to enable the .tcl and .set commands.
375 # If you select your owners wisely, you should be okay enabling these.
376 unbind dcc n tcl *dcc:tcl
377 unbind dcc n set *dcc:set
378
379 # If you enable this setting, only permanent owners (owner setting) will be
380 # able to use .tcl and .set. Moreover, if you want only let permanent owners
381 # use .dump, then set this to 2.
382 set must-be-owner 1
383
384 # Comment out this line to add the 'simul' partyline command (owners
385 # can manipulate other people on the party line). Please select owners
386 # wisely and use this command ethically!
387 unbind dcc n simul *dcc:simul
388
389 # Set here the maximum number of dcc connections you will allow. You can
390 # increase this later, but never decrease it.
391 set max-dcc 50
392
393 # Enable this setting if you want to enable the 'dccsimul' Tcl command.
394 set enable-simul 1
395
396 # Enable this setting if you want +d & +k users to use commands bound as -|-.
397 set allow-dk-cmds 1
398
399 # If your Eggdrop rejects bots that actually have already disconnected from
400 # another hub, but the disconnect information has not yet spread over the
401 # botnet due to lag, use this setting. The bot will wait dupwait-timeout
402 # seconds before it checks again and then finally reject the bot.
403 set dupwait-timeout 5
404
405 # You MUST remove this line for your bot to start. This has been added to
406 # prevent you from starting up a bot that is not fully configured. Bots
407 # that have not been fully configured may join the wrong IRC network, the
408 # wrong channels, or generally do things that you do not want. Please make
409 # sure that you have double-checked every setting. There's also a similar line
410 # lower down, just to make sure you're reading :)
411 die "Please make sure you edit your config file completely."
412
413
414 ##### MODULES #####
415
416 # Below are various settings for the modules included with Eggdrop.
417 # PLEASE READ AND EDIT THEM CAREFULLY, even if you're an old hand at
418 # Eggdrop, things change.
419
420 # This path specifies the path were Eggdrop should look for its modules.
421 # If you run the bot from the compilation directory, you will want to set
422 # this to "". If you use 'make install' (like all good kiddies do ;), this
423 # is a fine default. Otherwise, use your head :)
424 set mod-path "modules/"
425
426
427 #### DNS MODULE ####
428
429 # This module provides asynchronous dns support. This will avoid long
430 # periods where the bot just hangs there, waiting for a hostname to
431 # resolve, which will often let it timeout on all other connections.
432 loadmodule dns
433
434 #### CHANNELS MODULE ####
435
436 # This module provides channel related support for the bot. Without it,
437 # you won't be able to make the bot join a channel or save channel
438 # specific userfile information.
439 loadmodule channels
440
441 # Enter here the filename where dynamic channel settings are stored.
442 set chanfile "LamestBot.chan"
443
444 # Set this setting to 1 if you want your bot to expire bans/exempts/invites set
445 # by other opped bots on the channel.
446 set force-expire 0
447
448 # Set this setting to 1 if you want your bot to share user greets with other
449 # bots on the channel if sharing user data.
450 set share-greet 0
451
452 # Set this setting to 1 if you want to allow users to store an info line.
453 set use-info 1
454
455 # The following settings are used as default values when you .+chan #chan or .tcl
456 # channel add #chan. Look in the section below for explanation of every option.
457
458 set global-flood-chan 10:60
459 set global-flood-deop 3:10
460 set global-flood-kick 3:10
461 set global-flood-join 5:60
462 set global-flood-ctcp 3:60
463 set global-flood-nick 5:60
464 set global-aop-delay 5:30
465 set global-idle-kick 0
466 set global-chanmode "nt"
467 set global-stopnethack-mode 0
468 set global-revenge-mode 0
469 set global-ban-time 120
470 set global-exempt-time 60
471 set global-invite-time 60
472
473 set global-chanset {
474 -autoop -autovoice
475 -bitch +cycle
476 +dontkickops +dynamicbans
477 +dynamicexempts +dynamicinvites
478 -enforcebans +greet
479 -inactive -nodesynch
480 -protectfriends +protectops
481 -revenge -revengebot
482 -secret -seen
483 +shared +statuslog
484 +userbans +userexempts
485 +userinvites -protecthalfops
486 -autohalfop
487 }
488
489 # Add each static channel you want your bot to sit in using the following
490 # command. There are many different possible settings you can insert into
491 # this command, which are explained below.
492 #
493 # channel add #lamest {
494 # chanmode "+nt-likm"
495 # idle-kick 0
496 # stopnethack-mode 0
497 # revenge-mode 0
498 # ban-time 120
499 # exempt-time 60
500 # invite-time 60
501 # aop-delay 5:30
502 # need-op { putserv "PRIVMSG #lamest :op me cos i'm lame!" }
503 # need-invite { putserv "PRIVMSG #lamest :let me in!" }
504 # need-key { putserv "PRIVMSG #lamest :let me in!" }
505 # need-unban { putserv "PRIVMSG #lamest :let me in!" }
506 # need-limit { putserv "PRIVMSG #lamest :let me in!" }
507 # flood-chan 10:60
508 # flood-deop 3:10
509 # flood-kick 3:10
510 # flood-join 5:60
511 # flood-ctcp 3:60
512 # flood-nick 5:60
513 # }
514 #
515 # chanmode +/-<modes>
516 # This setting makes the bot enforce channel modes. It will always add
517 # the +<modes> and remove the -<modes> modes.
518 # idle-kick 0
519 # This setting will make the bot check every minute for idle
520 # users. Set this to 0 to disable idle check.
521 #
522 # stopnethack-mode 0
523 # This setting will make the bot de-op anyone who enters the channel
524 # with serverops. There're seven different modes for this settings:
525 # 0 turn off,
526 # 1 isoptest (allow serverop if registered op)
527 # 2 wasoptest (allow serverop if op before split)
528 # 3 allow serverop if isop or wasop
529 # 4 allow serverop if isop and wasop.
530 # 5 If the channel is -bitch, see stopnethack-mode 3
531 # If the channel is +bitch, see stopnethack-mode 1
532 # 6 If the channel is -bitch, see stopnethack-mode 2
533 # If the channel is +bitch, see stopnethack-mode 4
534 #
535 # revenge-mode 0
536 # This settings defines how the bot should punish bad users when
537 # revenging. There are four possible settings:
538 # 0 Deop the user.
539 # 1 Deop the user and give them the +d flag for the channel.
540 # 2 Deop the user, give them the +d flag for the channel, and kick them.
541 # 3 Deop the user, give them the +d flag for the channel, kick, and ban them.
542 #
543 # ban-time 120
544 # Set here how long temporary bans will last (in minutes). If you
545 # set this setting to 0, the bot will never remove them.
546 #
547 # exempt-time 60
548 # Set here how long temporary exempts will last (in minutes). If you
549 # set this setting to 0, the bot will never remove them. The bot will
550 # check the exempts every X minutes, but will not remove the exempt if
551 # a ban is set on the channel that matches that exempt. Once the ban is
552 # removed, then the exempt will be removed the next time the bot checks.
553 # Please note that this is an IRCnet feature.
554 #
555 # invite-time 60
556 # Set here how long temporary invites will last (in minutes). If you
557 # set this setting to 0, the bot will never remove them. The bot will
558 # check the invites every X minutes, but will not remove the invite if
559 # a channel is set to +i. Once the channel is -i then the invite will be
560 # removed the next time the bot checks. Please note that this is an IRCnet
561 # feature.
562 #
563 # aop-delay (minimum:maximum)
564 # This is used for autoop, autohalfop, autovoice. If an op or voice joins a
565 # channel while another op or voice is pending, the bot will attempt to put
566 # both modes on one line.
567 # aop-delay 0 No delay is used.
568 # aop-delay X An X second delay is used.
569 # aop-delay X:Y A random delay between X and Y is used.
570 #
571 # need-op { putserv "PRIVMSG #lamest :op me cos i'm lame!" }
572 # This setting will make the bot run the script enclosed in brackets
573 # if it does not have ops. This must be shorter than 120 characters.
574 # If you use scripts like getops.tcl or botnetop.tcl, you don't need
575 # to set this setting.
576 #
577 # need-invite { putserv "PRIVMSG #lamest :let me in!" }
578 # This setting will make the bot run the script enclosed in brackets
579 # if it needs an invite to the channel. This must be shorter than 120
580 # characters. If you use scripts like getops.tcl or botnetop.tcl, you
581 # don't need to set this setting.
582 #
583 # need-key { putserv "PRIVMSG #lamest :let me in!" }
584 # This setting will make the bot run the script enclosed in brackets
585 # if it needs the key to the channel. This must be shorter than 120
586 # characters. If you use scripts like getops.tcl or botnetop.tcl, you
587 # don't need to set this setting
588 #
589 # need-unban { putserv "PRIVMSG #lamest :let me in!" }
590 # This setting will make the bot run the script enclosed in brackets
591 # if it needs to be unbanned on the channel. This must be shorter than
592 # 120 characters. If you use scripts like getops.tcl or botnetop.tcl,
593 # you don't need to set this setting
594 #
595 # need-limit { putserv "PRIVMSG #lamest :let me in!" }
596 # This setting will make the bot run the script enclosed in brackets
597 # if it needs the limit to be raised on the channel. This must be
598 # shorter than 120 characters. If you use scripts like getops.tcl or
599 # botnetop.tcl, you don't need to set this setting
600 #
601 # flood-chan 10:60
602 # Set here how many channel messages in how many seconds from one
603 # host constitutes a flood. Setting this to 0 or 0:0 disables
604 # flood protection for the channel.
605 #
606 # flood-deop 3:10
607 # Set here how many deops in how many seconds from one host constitutes
608 # a flood. Setting this to 0 or 0:0 disables deop flood protection for
609 # the channel.
610 #
611 # flood-kick 3:10
612 # Set here how many kicks in how many seconds from one host constitutes
613 # a flood. Setting this to 0 or 0:0 disables kick flood protection for
614 # the channel.
615 #
616 # flood-join 5:60
617 # Set here how many joins in how many seconds from one host constitutes
618 # a flood. Setting this to 0 or 0:0 disables join flood protection for
619 # the channel.
620 #
621 # flood-ctcp 3:60
622 # Set here how many channel ctcps in how many seconds from one host
623 # constitutes a flood. Setting this to 0 or 0:0 disables ctcp flood
624 # protection for the channel.
625 #
626 # flood-nick 5:60
627 # Set here how many nick changes in how many seconds from one host
628 # constitutes a flood. Setting this to 0 or 0:0 disables nick flood
629 # protection for the channel.
630 #
631 # There are many different options for channels which you can
632 # define. They can be enabled or disabled using the channel set command by a
633 # plus or minus in front of them.
634 #
635 # channel set #lamest +enforcebans +dynamicbans +userbans +dynamicexempts
636 # channel set #lamest +userexempts +dynamicinvites +userinvites +protectops
637 # channel set #lamest +protectfriends +statuslog +revenge -protecthalfops
638 # channel set #lamest +revengebot +dontkickops +autovoice -autoop -autohalfop
639 # channel set #lamest -bitch -secret -shared +greet +cycle
640 #
641 # A complete list of all available channel settings:
642 #
643 # enforcebans
644 # When a ban is set, kick people who are on the channel and match
645 # the ban?
646 #
647 # dynamicbans
648 # Only activate bans on the channel when necessary? This keeps
649 # the channel's ban list from getting excessively long. The bot
650 # still remembers every ban, but it only activates a ban on the
651 # channel when it sees someone join who matches that ban.
652 #
653 # userbans
654 # Allow bans to be made by users directly? If turned off, the bot
655 # will require all bans to be made through the bot's console.
656 #
657 # dynamicexempts
658 # Only activate exempts on the channel when necessary? This keeps
659 # the channel's exempt list from getting excessively long. The bot
660 # still remembers every exempt, but it only activates a exempt on
661 # the channel when it sees a ban set that matches the exempt. The
662 # exempt remains active on the channel for as long as the ban is
663 # still active.
664 #
665 # userexempts
666 # Allow exempts to be made by users directly? If turned off, the
667 # bot will require all exempts to be made through the bot's console.
668 #
669 # dynamicinvites
670 # Only activate invites on the channel when necessary? This keeps
671 # the channel's invite list from getting excessively long. The bot
672 # still remembers every invite, but the invites are only activated
673 # when the channel is set to invite only and a user joins after
674 # requesting an invite. Once set, the invite remains until the
675 # channel goes to -i.
676 #
677 # userinvites
678 # Allow invites to be made by users directly? If turned off, the
679 # bot will require all invites to be made through the bot's console.
680 #
681 # autoop
682 # Op users with the +o flag as soon as they join the channel?
683 # This is insecure and not recommended.
684 #
685 # autohalfop
686 # Halfop users with the +l flag as soon as they join the channel?
687 # This is insecure and not recommended.
688 #
689 # bitch
690 # Only let users with +o) flag be opped on the channel?
691 #
692 # greet
693 # Say a user's info line when they join the channel?
694 #
695 # protectops
696 # Re-op a user with the +o flag if they get deopped?
697 #
698 # protecthalfops
699 # Re-halfop a user with the +l flag if they get dehalfopped?
700 #
701 # protectfriends
702 # Re-op a user with the +f flag if they get deopped?
703 #
704 # statuslog
705 # Log the channel status line every 5 minutes? This shows the bot's
706 # status on the channel (op, voice, etc.), The channel's modes, and
707 # the number of +m/+o/+v/+n/+b/+e/+I users on the channel. A sample
708 # status line follows:
709 #
710 # [01:40] @#lamest (+istn) : [m/1 o/1 v/4 n/7 b/1 e/5 I/7]
711 #
712 # revenge
713 # Remember people who deop/kick/ban the bot, valid ops, or friends
714 # and punish them? Users with the +f flag are exempt from revenge.
715 #
716 # revengebot
717 # This is similar to to the 'revenge' option, but it only triggers
718 # if a bot gets deopped, kicked or banned.
719 #
720 # autovoice
721 # Voice users with the +v flag when they join the channel?
722 #
723 # secret
724 # Prevent this channel from being listed on the botnet?
725 #
726 # shared
727 # Share channel-related user info for this channel?
728 #
729 # cycle
730 # Cycle the channel when it has no ops?
731 #
732 # dontkickops
733 # Do you want the bot not to be able to kick users who have the +o
734 # flag, letting them kick-flood for instance to protect the channel
735 # against clone attacks.
736 #
737 # inactive
738 # This prevents the bot from joining the channel (or makes it leave
739 # the channel if it is already there). It can be useful to make the
740 # bot leave a channel without losing its settings, channel-specific
741 # user flags, channel bans, and without affecting sharing.
742 #
743 # seen
744 # Respond to seen requests in the channel? The seen module must be
745 # loaded for this to work.
746 #
747 # nodesynch
748 # Allow non-ops to perform channel modes? This can stop the bot from
749 # fighting with services such as ChanServ, or from kicking IRCops when
750 # setting channel modes without having ops.
751 #
752 # Here is a shorter example:
753 #
754 # channel add #botcentral {
755 # chanmode "+mntisl 1"
756 # idle-kick 1
757 # }
758 # channel set #botcentral +bitch +enforcebans -greet +revenge
759
760
761 #### SERVER MODULE ####
762
763 # This module provides the core server support. You have to load this
764 # if you want your bot to come on IRC. Not loading this is equivalent
765 # to the old NO_IRC define.
766 loadmodule server
767
768 # What is your network?
769 # 0 = EFnet (non +e/+I Hybrid)
770 # 1 = IRCnet
771 # 2 = Undernet
772 # 3 = DALnet
773 # 4 = EFnet +e/+I Hybrid
774 # 5 = Others
775 set net-type 0
776
777 # Set the nick the bot uses on IRC, and on the botnet
778 # unless you specify a separate botnet-nick, here.
779
780 set nick "Lamestbot"
781
782 # Set the alternative nick which the bot uses on IRC if the nick specified
783 # by 'set nick' is unavailable. All '?' characters will be replaced by random
784 # numbers.
785
786 set altnick "Llamab?t"
787
788 # Set what should be displayed in the real-name field for the bot on IRC.
789 set realname "/msg LamestBot hello"
790
791 # Set here a script to run (if any) when first connecting to a server.
792 # This is limited to 120 characters.
793 set init-server { putserv "MODE $botnick +i-ws" }
794
795 # Set the default port which should be used if none is specified with
796 # '.jump' or in 'set servers'.
797 set default-port 6667
798
799 # This is the bot's server list. The bot will start at the first server listed,
800 # and cycle through them whenever it gets disconnected. You need to change these
801 # servers to YOUR network's servers.
802 #
803 # The format is:
804 # server[:port[:password]]
805 #
806 # Both the port and password fields are optional; however, if you want to set a
807 # password you must also set a port. If a port isn't specified it will default to
808 # your default-port setting.
809 set servers {
810 you.need.to.change.this:6667
811 another.example.com:7000
812 }
813
814 # This setting makes the bot try to get his original nickname back if its
815 # primary nickname is already in use.
816 set keep-nick 1
817
818 # Set this to 1 if you don't want your the bot to strip a leading '~'
819 # on user@hosts.
820 set strict-host 0
821
822 # This setting makes the bot squelch the error message when rejecting a DCC
823 # CHAT, SEND or message command. Normally, Eggdrop notifies the user that the
824 # command has been rejected because they don't have access. Note that sometimes
825 # IRC server operators detect bots that way.
826 set quiet-reject 1
827
828 # If you want your bot to answer lower case ctcp requests (non rfc-
829 # compliant), set this setting to 1. mIRC will do this, most other
830 # clients will not.
831 set lowercase-ctcp 0
832
833 # Set how many ctcps should be answered at once.
834 set answer-ctcp 3
835
836 # Set here how many msgs in how many seconds from one host constitutes
837 # a flood. If you set this to 0:0, msg flood protection will be disabled.
838 set flood-msg 5:60
839
840 # Set here how many ctcps in how many seconds from one host constitutes
841 # a flood. If you set this to 0:0, ctcp flood protection will be disabled.
842 set flood-ctcp 3:60
843
844 # This settings makes the bot cycle forever through the server list until
845 # it successfully connects to one.
846 set never-give-up 1
847
848 # This setting defines how long Eggdrop should wait before moving from one
849 # server to another on disconnect. If you set 0 here, Eggdrop will not wait
850 # at all and will connect instantly. Setting this too low could result in
851 # your bot being K:Lined.
852 set server-cycle-wait 60
853
854 # Set here how long Eggdrop should wait for a response when connecting to a
855 # server before giving up and moving on to next server.
856 set server-timeout 60
857
858 # If the number of servers on the net gets below this number, the bot
859 # will jump to a new server (it will assume it's on the losing end of
860 # a netsplit). Set this to 0 to turn off. If your bot is running on
861 # any major IRC network, this should probably be turned off.
862 set servlimit 0
863
864 # Set this to 1 if Eggdrop should check for stoned servers? (where the
865 # server connection has died, but Eggdrop hasn't been notified yet).
866 set check-stoned 1
867
868 # If you want your bot to exit the server if it receives an ERROR message,
869 # set this to 1.
870 set serverror-quit 1
871
872 # Set here the maximum number of lines to queue to the server. If you're
873 # going to dump large chunks of text to people over IRC, you will probably
874 # want to raise this. 300 is fine for most people though.
875 set max-queue-msg 300
876
877 # If you want Eggdrop to trigger binds for ignored users, set this to 1.
878 set trigger-on-ignore 0
879
880 # Allow identical messages in the mode queue?
881 set double-mode 0
882
883 # Allow identical messages in the server queue?
884 set double-server 0
885
886 # Allow identical messages in the help queue?
887 set double-help 0
888
889 # This optimizes the kick queue. It also traces nick changes and parts in
890 # the channel and changes the kick queue accordingly. There are three
891 # different options for this setting:
892 # 0 = Turn it off.
893 # 1 = Optimize the kick queue by summarizing kicks.
894 # 2 = Trace nick changes and parts on the channel and change the queue
895 # accordingly. For example, bot will not try to kick users who have
896 # already parted the channel.
897 # ATTENTION: Setting 2 is very CPU intensive.
898 set optimize-kicks 1
899
900 # If your network supports more recipients per command then 1, you can
901 # change this behavior here. Set this to the number of recipients per
902 # command, or set this to 0 for unlimited.
903 set stack-limit 4
904
905 ### SERVER MODULE - OTHER NETWORKS (net-type 5) ###
906
907 # This settings defines how umode +r is understood by Eggdrop. Some
908 # networks use +r to indicate a restricted connection. If this is your
909 # case, and you want your bot to leave restricted servers and jump to
910 # the next server on its list, then set it to 1.
911 #set check-mode-r 1
912
913 # This setting allows you to specify the maximum nick-length supported by
914 # your network. The default setting is 9. The maximum supported length by
915 # Eggdrop is 32.
916 #set nick-len 9
917
918 #### CTCP MODULE ####
919
920 # This module provides the normal ctcp replies that you'd expect.
921 # Without it loaded, CTCP CHAT will not work. The server module
922 # is required for this module to function.
923 loadmodule ctcp
924
925 # Set here how the ctcp module should answer ctcps. There are 3 possible
926 # operating modes:
927 # 0: Normal behavior is used.
928 # 1: The bot ignores all ctcps, except for CHAT and PING requests
929 # by users with the +o flag.
930 # 2: Normal behavior is used, however the bot will not answer more
931 # than X ctcps in Y seconds (defined by 'set flood-ctcp').
932 set ctcp-mode 0
933
934 # There are also several variables to help make your bot less noticeable.
935 # They are: ctcp-version, ctcp-finger, and ctcp-userinfo. You can use set to set
936 # them to values you'd like.
937
938
939 #### IRC MODULE ####
940
941 # This module provides basic IRC support for your bot. You have to
942 # load this if you want your bot to come on IRC. The server and channels
943 # modules must be loaded for this module to function.
944 loadmodule irc
945
946 # Set this to 1 if you want to bounce all server bans.
947 set bounce-bans 1
948
949 # Set this to 1 if you want to bounce all server modes.
950 set bounce-modes 0
951
952 # Set here the maximum number of bans you want the bot to set on a channel.
953 # Eggdrop will not place any more bans if this limit is reached. Undernet
954 # currently allows 45 bans, IRCnet allows 30, EFnet allows 20, and DALnet
955 # allows 100.
956 set max-bans 20
957
958 # There is a global limit for +b/+e/+I modes. This limit should be set to
959 # the same value as max-bans for networks that do not support +e/+I.
960 set max-modes 30
961
962 # Set this to 1 if you want the bot to kick for control character/ctcp
963 # avalanches to a channel. Remember that if it does, it won't ban them.
964 # This can start kick floods.
965 set kick-fun 0
966
967 # Set this to 1 if you want the bot to ban for control character/ctcp
968 # avalanches to a channel. This can prevent kick floods, but it also can
969 # fill the banlist.
970 set ban-fun 0
971
972 # If you want people to be able to add themselves to the bot's userlist
973 # with the default userflags (defined above in the config file) via the
974 # 'hello' msg command, set this to 1.
975 set learn-users 0
976
977 # Set here the time (in seconds) to wait for someone to return from
978 # a netsplit (i.e. wasop will expire afterwards). Set this to 1500
979 # on IRCnet since its nick delay stops after 30 minutes.
980 set wait-split 600
981
982 # Set here the time (in seconds) that someone must have been off-channel
983 # before re-displaying their info line.
984 set wait-info 180
985
986 # Set this to the maximum number of bytes to send in the arguments
987 # of modes sent to the server. Most servers default this to 200.
988 set mode-buf-length 200
989
990 # Many IRCops find bots by seeing if they reply to 'hello' in a msg.
991 # You can change this to another word by un-commenting the following
992 # two lines and changing "myword" to the word wish to use instead of
993 # 'hello'. It must be a single word.
994 #unbind msg - hello *msg:hello
995 #bind msg - myword *msg:hello
996
997 # Many takeover attempts occur due to lame users blindly /msg ident'ing to
998 # the bot and attempting to guess passwords. We now unbind this command by
999 # default to discourage them. You can enable these commands by commenting the
1000 # following two lines.
1001 unbind msg - ident *msg:ident
1002 unbind msg - addhost *msg:addhost
1003
1004 # If you are so lame you want the bot to display peoples info lines, even
1005 # when you are too lazy to add their chanrecs to a channel, set this to 1.
1006 # *NOTE* This means *every* user with an info line will have their info
1007 # line displayed on EVERY channel they join (provided they have been gone
1008 # longer than wait-info).
1009 set no-chanrec-info 0
1010
1011 ### IRC MODULE - IRCnet SPECIFIC FEATURES (net-type 1) ###
1012
1013 # Attention: Use these settings *only* if you set 'net-type' to 1!
1014
1015 # Set this to 1 if you want to bounce all server exemptions (+e modes).
1016 set bounce-exempts 0
1017
1018 # Set this to 1 if you want to bounce all server invitations (+I modes).
1019 set bounce-invites 0
1020
1021 # Set here the maximum number of exempts you want Eggdrop to set
1022 # on a channel. Eggdrop will not place any more exempts if this
1023 # limit is reached.
1024 set max-exempts 20
1025
1026 # Set here the maximum number of invites you want Eggdrop to set
1027 # on a channel. Eggdrop will not place any more invites if this
1028 # limit is reached.
1029 set max-invites 20
1030
1031 # The following settings should be left commented unless the default values
1032 # are being overridden. By default, exempts and invites are on for IRCnet,
1033 # but off for all other large networks. This behavior can be modified with
1034 # the following 2 flags. If your network doesn't support +e/+I modes then you
1035 # will be unable to use these features.
1036 #
1037 # Do you want to enable exempts?
1038 #set use-exempts 0
1039
1040 # Do you want to use invites?
1041 #set use-invites 0
1042
1043 # At the moment, the current IRCnet IRCd version (2.10) doesn't support the mixing
1044 # of b,o and v modes with e and I modes. This might be changed in the future, so
1045 # use 1 at the moment for this setting.
1046 set prevent-mixing 1
1047
1048 ### IRC MODULE - OTHER NETWORKS (net-type 5) ###
1049
1050 # Attention: Use these settings *only* if you set 'net-type' to 5!
1051
1052 # If your network supports more users per kick command then 1, you can
1053 # change this behavior here. Set this to the number of users to kick at
1054 # once, or set this to 0 for all at once.
1055 #set kick-method 1
1056
1057 # Some networks allow you to stack lots of channel modes into one line.
1058 # They're all guaranteed to support at least 3, so that's the default.
1059 # If you know your network supports more, you may want to adjust this.
1060 # This setting is limited to 6, although if you want to use a higher value,
1061 # you can modify this by changing the value of MODES_PER_LINE_MAX in
1062 # src/chan.h and recompiling the bot.
1063 #set modes-per-line 3
1064
1065 # Some networks don't include the +l limit and +k or -k key modes
1066 # in the modes-per-line (see above) limitation. Set include-lk to 0 for
1067 # these networks.
1068 #set include-lk 1
1069
1070 # Set this to 1 if your network uses IRCu2.10.01 specific /who requests.
1071 # Eggdrop can, therefore, ask only for exactly what's needed.
1072 #set use-354 0
1073
1074 # If your network doesn't use rfc 1459 compliant string matching routines,
1075 # set this to 0.
1076 #set rfc-compliant 1
1077
1078
1079 #### TRANSFER MODULE ####
1080
1081 # The transfer module provides dcc send/get support and userfile transfer
1082 # support for userfile sharing. Un-comment the next line to load it if you
1083 # need this functionality.
1084 #loadmodule transfer
1085
1086 # Set here the maximum number of simultaneous downloads to allow for
1087 # each user.
1088 set max-dloads 3
1089
1090 # Set here the block size for dcc transfers. ircII uses 512 bytes,
1091 # but admits that it may be too small. 1024 is standard these days.
1092 # 0 is turbo-dcc (recommended).
1093 set dcc-block 0
1094
1095 # Enable this setting if you want to copy files into the /tmp directory
1096 # before sending them. This is useful on most systems for file stability,
1097 # but if your directories are NFS mounted, it's a pain, and you'll want
1098 # to set this to 0. If you are low on disk space, you may also want to
1099 # set this to 0.
1100 set copy-to-tmp 1
1101
1102 # Set here the time (in seconds) to wait before an inactive transfer
1103 # times out.
1104 set xfer-timeout 30
1105
1106
1107 #### SHARE MODULE ####
1108
1109 # This module provides userfile sharing support between two directly
1110 # linked bots. The transfer and channels modules are required for this
1111 # module to correctly function. Un-comment the following line to load
1112 # the share module.
1113 #loadmodule share
1114
1115 # Settings in this section must be un-commented before setting.
1116
1117 # When two bots get disconnected, this setting allows them to create a
1118 # resync buffer which saves all changes done to the userfile during
1119 # the disconnect. When they reconnect, they will not have to transfer
1120 # the complete user file, but, instead, just send the resync buffer.
1121 #
1122 # NOTE: This has been known to cause loss of channel flags and other
1123 # problems. Using this setting is not recommended.
1124 #set allow-resync 0
1125
1126 # This setting specifies how long to hold another bots resync data
1127 # before flushing it.
1128 #set resync-time 900
1129
1130 # When sharing user lists, DON'T ACCEPT global flag changes from other bots?
1131 # NOTE: The bot will still send changes made on the bot, it just won't accept
1132 # any global flag changes from other bots.
1133 #set private-global 0
1134
1135 # When sharing user lists, if private-global isn't set, which global flag
1136 # changes from other bots should be ignored?
1137 #set private-globals "mnot"
1138
1139 # When sharing user lists, don't accept ANY userfile changes from other
1140 # bots? Paranoid people should use this feature on their hub bot. This
1141 # will force all userlist changes to be made via the hub.
1142 #set private-user 0
1143
1144 # This setting makes the bot discard its own bot records in favor of
1145 # the ones sent by the hub.
1146 # NOTE: No passwords or botflags are shared, only ports and
1147 # address are added to sharing procedure. This only works with hubs that
1148 # are v1.5.1 or higher.
1149 #set override-bots 0
1150
1151
1152 #### COMPRESS MODULE ####
1153
1154 # This module provides provides support for file compression. This allows the
1155 # bot to transfer compressed user files and therefore save a significant amount
1156 # of bandwidth. The share module must be loaded to load this module. Un-comment
1157 # the following line to the compress module.
1158 #loadmodule compress
1159
1160 # Allow compressed sending of user files? The user files are
1161 # compressed with the compression level defined in `compress-level'.
1162 set share-compressed 1
1163
1164 # This is the default compression level used.
1165 #set compress-level 9
1166
1167
1168 #### FILESYSTEM MODULE ####
1169
1170 # This module provides an area within the bot where users can store
1171 # files. With this module, the bot is usable as a file server. The
1172 # transfer module is required for this module to function. Un-comment
1173 # the following line to load the filesys module.
1174 #loadmodule filesys
1175
1176 # Set here the 'root' directory for the file system.
1177 set files-path "/home/mydir/filesys"
1178
1179 # If you want to allow uploads, set this to the directory uploads
1180 # should be put into. Set this to "" if you don't want people to
1181 # upload files to your bot.
1182 set incoming-path "/home/mydir/filesys/incoming"
1183
1184 # If you don't want to have a central incoming directory, but instead
1185 # want uploads to go to the current directory that a user is in, set
1186 # this setting to 1.
1187 set upload-to-pwd 0
1188
1189 # Eggdrop creates a '.filedb' file in each subdirectory of your file area
1190 # to keep track of its own file system information. If you can't do that (for
1191 # example, if the dcc path isn't owned by you, or you just don't want it to do
1192 # that) specify a path here where you'd like all of the database files to be
1193 # stored instead.
1194 set filedb-path ""
1195
1196 # Set here the maximum number of people that can be in the file area at once.
1197 # Setting this to 0 makes it effectively infinite.
1198 set max-file-users 20
1199
1200 # Set here the maximum allowable file size that will be received (in kb).
1201 # Setting this to 0 makes it effectively infinite.
1202 set max-filesize 1024
1203
1204
1205 #### NOTES MODULE ####
1206
1207 # This module provides support for storing of notes for users from each
1208 # other. Note sending between currently online users is supported in the
1209 # core, this is only for storing the notes for later retrieval.
1210 loadmodule notes
1211
1212 # Set here the filename where private notes between users are stored.
1213 set notefile "LamestBot.notes"
1214
1215 # Set here the maximum number of notes to allow to be stored for
1216 # each user (to prevent flooding).
1217 set max-notes 50
1218
1219 # Set here how long (in days) to store notes before expiring them.
1220 set note-life 60
1221
1222 # Set this to 1 if you want to allow users to specify a forwarding
1223 # address for forwarding notes to another account on another bot.
1224 set allow-fwd 0
1225
1226 # Set this to 1 if you want the bot to let people know hourly if they
1227 # have any notes.
1228 set notify-users 1
1229
1230 # Set this to 1 if you want the bot to let people know on join if they
1231 # have any notes.
1232 set notify-onjoin 1
1233
1234 # Comment out this next line. Otherwise, your bot won't start.
1235 die "You didn't edit your config file completely like you were told, did you?"
1236
1237
1238 #### CONSOLE MODULE ####
1239
1240 # This module provides storage of console settings when you exit the
1241 # bot or type .store on the partyline.
1242 loadmodule console
1243
1244 # Save users console settings automatically? Otherwise, they have
1245 # to use the .store command.
1246 set console-autosave 1
1247
1248 # If a user doesn't have any console settings saved, which channel
1249 # do you want them automatically put on?
1250 set force-channel 0
1251
1252 # Enable this setting if a user's global info line should be displayed
1253 # when they join a botnet channel.
1254 set info-party 0
1255
1256
1257 #### WOOBIE MODULE ####
1258
1259 # This is for demonstrative purposes only. If you are looking for starting
1260 # point in writing modules, woobie is the right thing.
1261 #loadmodule woobie
1262
1263
1264 #### SEEN MODULE ####
1265
1266 # This module provides very basic seen commands via msg, on channel or via dcc.
1267 # This module works only for users in the bot's userlist. If you are looking for
1268 # a better and more advanced seen module, try the gseen module by G'Quann. You
1269 # can find it at http://www.visions-of-fantasy.de/gseen.mod/.
1270 #loadmodule seen
1271
1272
1273 #### BLOWFISH MODULE ####
1274
1275 # IF YOU DON'T READ THIS YOU MAY RENDER YOUR USERFILE USELESS LATER
1276 # Eggdrop encrypts its userfile, so users can have secure passwords.
1277 # Please note that when you change your encryption method later (i.e.
1278 # using other modules like a md5 module), you can't use your current
1279 # userfile anymore. Eggdrop will not start without an encryption module.
1280 #loadmodule blowfish
1281
1282
1283 #### ASSOC MODULE ####
1284
1285 # This module provides assoc support, i.e. naming channels on the botnet.
1286 # You can load it by un-commenting the following line.
1287 #loadmodule assoc
1288
1289
1290 #### WIRE MODULE ####
1291
1292 # This module provides all the standard .wire commands via dcc. It is an
1293 # encrypted partyline communication tool, compatible with wire.tcl. An
1294 # encryption module must be loaded to use this module. Un-comment the
1295 # following line to load the wire module.
1296 #loadmodule wire
1297
1298 #### UPTIME MODULE ####
1299
1300 # This module reports uptime statistics to http://uptime.eggheads.org.
1301 # Go look and see what your uptime is! It takes about 9 hours to show up,
1302 # so if your bot isn't listed, try again later. The server module must be
1303 # loaded for this module to function.
1304 #
1305 # Information sent to the server includes the bot's uptime, botnet-nick,
1306 # server, version, and IP address. This information is stored in a temporary
1307 # logfile for debugging purposes only. The only publicly available information
1308 # will be the bot's botnet-nick, version and uptime. If you do not wish for this
1309 # information to be sent, comment out the following line.
1310 loadmodule uptime
1311
1312 ##### SCRIPTS #####
1313
1314 # This is a good place to load scripts to use with your bot.
1315
1316 # This line loads script.tcl from the scripts directory inside your Eggdrop's
1317 # directory. All scripts should be put there, although you can place them where
1318 # you like as long as you can supply a fully qualified path to them.
1319 #
1320 # source scripts/script.tcl
1321
1322 source scripts/alltools.tcl
1323 source scripts/action.fix.tcl
1324
1325 # Use this script for Tcl and Eggdrop downwards compatibility.
1326 # NOTE: This can also cause problems with some newer scripts.
1327 source scripts/compat.tcl
1328
1329 # This script provides many useful informational functions, like setting
1330 # users' URLs, e-mail address, ICQ numbers, etc. You can modify it to add
1331 # extra entries.
1332 source scripts/userinfo.tcl
1333 loadhelp userinfo.help

webmaster@eggheads.org
ViewVC Help
Powered by ViewVC 1.1.23