/[cvs]/eggdrop1.6/eggdrop.conf
ViewVC logotype

Contents of /eggdrop1.6/eggdrop.conf

Parent Directory Parent Directory | Revision Log Revision Log | View Revision Graph Revision Graph


Revision 1.12 - (show annotations) (download)
Tue Jan 28 06:37:24 2003 UTC (16 years, 3 months ago) by wcc
Branch: MAIN
Changes since 1.11: +3 -3 lines
* Ran indent on the tree (with hand editing of course) to fix our horrible
  indenting variations/problems. This is the same format we generally
  follow throughout most of the tree.

1 #! /path/to/executable/eggdrop
2 # ^- This should contain a fully qualified path to your Eggdrop executable.
3 #
4 # $Id: eggdrop.conf,v 1.11 2003/01/23 02:13:28 wcc Exp $
5 #
6 # This is a sample Eggdrop configuration file which includes all possible
7 # settings that can be used to configure your bot.
8 #
9 # The pound signs (#) that you see at the beginning of some lines mean that
10 # the remainder of that line is a comment, or just for your information. By
11 # adding or deleting pound signs, you can comment or uncomment a setting,
12 # respectively.
13 #
14 # More detailed descriptions of all these settings can be found in
15 # doc/settings/.
16
17
18 ##### BASIC SETTINGS #####
19
20 # This setting defines the username the bot uses on IRC. This setting has
21 # no effect if an ident daemon is running on your bot's machine.
22 set username "lamest"
23
24 # This setting defines which contact person should be shown in .status,
25 # /msg help, and other places. You really should include this information.
26 set admin "Lamer <email: lamer@lamest.lame.org>"
27
28 # This setting is used only for info to share with others on your botnet.
29 # Set this to the IRC network your bot is connected to.
30 set network "I.didn't.edit.my.config.file.net"
31
32 # This setting defines the timezone is your bot in. It's used for internal
33 # routines as well as for logfile timestamping and scripting purposes.
34 # The timezone string specifies the name of the timezone and must be three
35 # or more alphabetic characters. For example, Central European Time(UTC+1)
36 # should be "CET".
37 set timezone "EST"
38
39 # The offset setting specifies the time value to be added to the local
40 # time to get Coordinated Universal Time (UTC aka GMT). The offset is
41 # positive if the local timezone is west of the Prime Meridian and
42 # negative if it is east. The value (in hours) must be between -23 and
43 # 23. For example, if the timezone is UTC+1, the offset is -1.
44 set offset "5"
45
46 # If you don't want to use the timezone setting for scripting purposes only,
47 # but instead everywhere possible, un-comment the following line.
48 #set env(TZ) "$timezone $offset"
49
50 # If you're using virtual hosting (your machine has more than 1 IP), you
51 # may want to specify the particular IP to bind to. You can specify either
52 # by hostname or by IP. You may also want to set the hostname here if
53 # Eggdrop has trouble detecting it when it starts up.
54 #set my-hostname "virtual.host.com"
55 #set my-ip "99.99.0.0"
56
57 # If you want to have your Eggdrop messages displayed in a language other
58 # than English, change this setting to match your preference. An alternative
59 # would be to set the environment variable EGG_LANG to that value.
60 #addlang "english"
61
62
63 ##### LOG FILES #####
64
65 # Eggdrop is capable of logging various things, from channel chatter to
66 # commands people use on the bot and file transfers. Logfiles are normally
67 # kept for 24 hours. Afterwards, they will be renamed to "(logfile).yesterday".
68 # After 48 hours, they will be overwritten by the logfile of the next day.
69 #
70 # Events are logged by certain categories. This way, you can specify
71 # exactly what kind of events you want sent to various logfiles.
72 #
73 # The most common log file flags are:
74 # m private msgs/ctcps to the bot
75 # k kicks, bans, mode changes on the channel
76 # j joins, parts, netsplits on the channel
77 # p public chatter on the channel
78 # s server connects/disconnects/notices
79 # b information about bot linking and userfile sharing
80 # c commands people use (via msg or dcc)
81 # x file transfers and file-area commands
82 # r (if use-console-r enabled) EVERYTHING sent to the bot by the server
83 # o other: misc info, errors -- IMPORTANT STUFF
84 # w wallops: msgs between IRCops (be sure to set the bot +w in init-server)
85 #
86 # There are others, but you probably shouldn't log them, it'd be rather
87 # unethical. ;) There are also eight user-defined levels (1-8) which
88 # are used by Tcl scripts.
89 #
90 # Each logfile belongs to a certain channel. Events of type 'k', 'j', and 'p'
91 # are logged to whatever channel they happened on. Most other events are
92 # currently logged to every channel. You can make a logfile belong to all
93 # channels by assigning it to channel "*".
94
95 # This is the maximum number of logfiles allowed. This setting can be
96 # increased; however, don't decrease it.
97 set max-logs 5
98
99 # This is the maximum size of your logfiles. Set it to 0 to disable.
100 # This value is in kilobytes, so '550' would mean cycle logs when it
101 # reaches the size of 550 kilobytes. Note that this only works if you
102 # have keep-all-logs 0 (OFF).
103 set max-logsize 0
104
105 # This could be good if you have had problem with the logfile filling
106 # your quota/hard disk or if you log +p and publish it to the web and
107 # need more up-to-date info. Note that this setting might increase the
108 # CPU usage of your bot (on the other hand it will decrease your mem usage).
109 set quick-logs 0
110
111 # This creates a logfile named eggdrop.log containing private msgs/ctcps,
112 # commands, errors, and misc. info from any channel.
113 logfile mco * "logs/eggdrop.log"
114
115 # This creates a logfile named lamest.log containing joins, parts,
116 # netsplits, kicks, bans, mode changes, and public chat on the
117 # channel #lamest.
118 logfile jpk #lamest "logs/lamest.log"
119
120 # Use this feature to timestamp entries in the log file.
121 set log-time 1
122
123 # If you want to keep your logfiles forever, turn this setting on. All
124 # logfiles will get suffix ".[day, 2 digits][month, 3 letters][year, 4 digits]".
125 # Note that your quota/hard-disk might be filled by this, so check your logfiles
126 # often and download them.
127 set keep-all-logs 0
128
129 # If keep-all-logs is 1, this setting will define the suffix of the logfiles.
130 # The default will result in a suffix like "04May2000". "%Y%m%d" will produce
131 # the often used yyyymmdd format. Read the strftime manpages for more options.
132 # NOTE: On systems which don't support strftime, the default format will
133 # be used _always_.
134 set logfile-suffix ".%d%b%Y"
135
136 # You can specify when Eggdrop should switch logfiles and start fresh. You
137 # must use military time for this setting. 300 is the default, and describes
138 # 03:00 (AM).
139 set switch-logfiles-at 300
140
141 # "Writing user file..." and "Writing channel file..." messages won't be
142 # logged anymore if this option is enabled.
143 set quiet-save 0
144
145
146 ##### CONSOLE #####
147
148 # This is the default console mode. It uses the same event flags as the log
149 # files do. The console channel is automatically set to your "primary" channel,
150 # which is set in the modules section of the config file. Masters can change
151 # their console channel and modes with the '.console' command.
152
153 set console "mkcobxs"
154
155
156 ##### FILES AND DIRECTORIES #####
157
158 # Specify here the filename your userfile should be saved as.
159 set userfile "LamestBot.user"
160
161 # Specify here the filename Eggdrop will save its pid to. If no pidfile is
162 # specified, pid.(botnet-nick) will be used.
163 #set pidfile "pid.LamestBot"
164
165 # If you want your userfile to be sorted upon saving, enable this setting.
166 # This causes the bot to use bit more CPU when saving the usefile.
167 set sort-users 0
168
169 # Specify here where Eggdrop should look for help files. Don't modify this
170 # setting unless you know what you're doing!
171 set help-path "help/"
172
173 # Specify here where Eggdrop should look for text files. This is used for
174 # certain Tcl and DCC commands.
175 set text-path "text/"
176
177 # Set here a place to store temporary files.
178 set temp-path "/tmp"
179
180 # The MOTD (Message Of The day) is displayed when people dcc chat or telnet
181 # to the bot. Look at doc/text-substitutions.doc for options.
182 set motd "text/motd"
183
184 # This banner will be displayed on telnet connections. Look at
185 # doc/text-substitutions.doc for options.
186 set telnet-banner "text/banner"
187
188 # This specifies what permissions the user, channel, and notes files should
189 # be set to. The octal values are the same as for the chmod system command.
190 #
191 # To remind you:
192 #
193 # u g o u g o u g o
194 # 0600 rw------- 0400 r-------- 0200 -w------- u - user
195 # 0660 rw-rw---- 0440 r--r----- 0220 -w--w---- g - group
196 # 0666 rw-rw-rw- 0444 r--r--r-- 0222 -w--w--w- o - others
197 #
198 # Note that the default 0600 is the most secure one and should only be changed
199 # if you need your files for shell scripting or other external applications.
200 set userfile-perm 0600
201
202
203 ##### BOTNET/DCC/TELNET #####
204
205 # Settings in this section should be unimportant for you until you deal
206 # with botnets (multiple Eggdrops connected together to maximize efficiency).
207 # You should read doc/BOTNET before modifying these settings.
208
209 # If you want to use a different nickname on the botnet than you use on
210 # IRC (i.e. if you're on an un-trusted botnet), un-comment the next line
211 # and set it to the nick you would like to use.
212 #set botnet-nick "LlamaBot"
213
214 # This opens a telnet port by which you and other bots can
215 # interact with the Eggdrop by telneting in.
216 #
217 # There are more options for the listen command in doc/tcl-commands.doc.
218 # Note, if you are running more than one bot on the same machine, you will
219 # want to space the telnet ports at LEAST 5 apart. 10 is even better.
220 #
221 # Valid ports are typically anything between 1025 and 65535 assuming the
222 # port is not already in use.
223 #
224
225 # If you would like the bot to listen for users and bots in separate ports,
226 # use the following format.
227 #
228 # listen 3333 bots
229 # listen 4444 users
230 #
231 # If you wish to use only one port, use this format:
232 listen 3333 all
233
234 # This setting defines whether or not people can boot users on the Eggdrop
235 # from other bots in your botnet. Valid settings are:
236 # 0 - allow *no* outside boots
237 # 1 - allow boots from sharebots
238 # 2 - allow any boots
239 set remote-boots 2
240
241 # This setting prohibits remote bots from telling your Eggdrop to unlink from
242 # share bots.
243 set share-unlinks 1
244
245 # This setting will drop telnet connections not matching a known host. It
246 # greatly improves protection from IRCops, but makes it impossible to add
247 # hosts on limbo (NOIRC) bots or have NEW as a valid login.
248 set protect-telnet 0
249
250 # This setting will make the bot ignore DCC chat requests which appear to
251 # have bogus information on the grounds that the user may have been trying
252 # to make the bot connect to somewhere that will get it into trouble, or
253 # that the user has a broken client (like mIRC tends to do), in which case
254 # the connect wouldn't work anyway. It's suggested that you turn this on.
255 set dcc-sanitycheck 0
256
257 # This settings defines a time in seconds that the bot should wait before
258 # a dcc chat, telnet, or relay connection times out.
259 set ident-timeout 5
260
261 # Define here whether or not a +o user still needs the +p flag to dcc the bot.
262 set require-p 0
263
264 # If you want people allow to telnet in and type 'NEW' to become a new user,
265 # set this to 1. This is similar to the 'hello' msg command. The protect-telnet
266 # setting must be set to 0 to use this.
267 set open-telnets 0
268
269 # If you don't want Eggdrop to identify itself as an eggdrop on a telnet connection,
270 # set this setting to 1. Eggdrop will display 'Nickname' instead.
271 set stealth-telnets 0
272
273 # If you want Eggdrop to display a banner when telneting in, set this setting
274 # to 1. The telnet banner is set by 'set telnet-banner'.
275 set use-telnet-banner 0
276
277 # This settings defines a time in seconds that the bot should wait before
278 # a dcc chat, telnet, or relay connection times out.
279 set connect-timeout 15
280
281 # Specify here the number of lines to accept from a user on the partyline
282 # within 10 seconds before they are considered to be flooding and therefore
283 # get booted.
284 set dcc-flood-thr 3
285
286 # Define here how many telnet connection attempts in how many seconds from
287 # the same host constitute a flood. The correct format is Attempts:Seconds.
288 set telnet-flood 5:60
289
290 # If you want telnet-flood to apply even to +f users, set this setting to 1.
291 set paranoid-telnet-flood 1
292
293 # Set here the amount of seconds before giving up on hostname/address
294 # lookup (you might want to increase this if you are on a slow network).
295 set resolve-timeout 15
296
297
298 ##### MORE ADVANCED SETTINGS #####
299
300 # Set this to your socks host if your Eggdrop sits behind a firewall.
301 # If you use a Sun "telnet passthru" firewall, use this setting:
302 #set firewall "!sun-barr.ebay:3666"
303
304 # If you have a NAT firewall (you box has an IP in one of the following
305 # ranges: 192.168.0.0-192.168.255.255, 172.16.0.0-172.31.255.255,
306 # 10.0.0.0-10.255.255.255 and your firewall transparently changes your
307 # address to a unique address for your box) or you have IP masquerading
308 # between you and the rest of the world, and /dcc chat,/ctcp chat or
309 # userfile sharing aren't working, enter your outside IP here. Do not
310 # enter anything for my-ip or my-hostname if you use this setting.
311 #set nat-ip "127.0.0.1"
312
313 # If you want all dcc file transfers to use a particular portrange either
314 # because you're behind a firewall, or for other security reasons, set it
315 # here.
316 #set reserved-portrange 2010:2020
317
318 # Set the time in minutes that temporary ignores should last.
319 set ignore-time 15
320
321 # Define here what Eggdrop considers 'hourly'. All calls to it, including such
322 # things as note notifying or userfile saving, are affected by this. For example:
323 #
324 # set hourly-updates 15
325 #
326 # The bot will save its userfile 15 minutes past every hour.
327 set hourly-updates 00
328
329 # Un-comment the next line and set the list of owners of the bot.
330 # You NEED to change this setting.
331 #set owner "MrLame, MrsLame"
332
333 # Who should a note be sent to when new users are learned?
334 set notify-newusers "$owner"
335
336 # Enter the flags that all new users should get by default. See '.help whois'
337 # on the partyline for a list of flags and their descriptions.
338 set default-flags "hp"
339
340 # Enter all user-defined fields that should be displayed in a '.whois'.
341 # This will only be shown if the user has one of these extra fields.
342 # You might prefer to comment this out and use the userinfo1.0.tcl script
343 # which provides commands for changing all of these.
344 set whois-fields "url birthday"
345
346 # Enable this setting if you want your Eggdrop to die upon receiving a SIGHUP
347 # kill signal. Otherwise, the Eggdrop will just save its userfile and rehash.
348 set die-on-sighup 0
349
350 # Enable this setting if you want your Eggdrop to die upon receiving a SIGTERM
351 # kill signal. Otherwise, the Eggdrop will just save its userfile and rehash.
352 set die-on-sigterm 1
353
354 # Comment these two lines if you wish to enable the .tcl and .set commands.
355 # If you select your owners wisely, you should be okay enabling these.
356 unbind dcc n tcl *dcc:tcl
357 unbind dcc n set *dcc:set
358
359 # If you enable this setting, only permanent owners (owner setting) will be
360 # able to use .tcl and .set. Moreover, if you want only let permanent owners
361 # use .dump, then set this to 2.
362 set must-be-owner 1
363
364 # Comment out this line to add the 'simul' partyline command (owners
365 # can manipulate other people on the party line). Please select owners
366 # wisely and use this command ethically!
367 unbind dcc n simul *dcc:simul
368
369 # Set here the maximum number of dcc connections you will allow. You can
370 # increase this later, but never decrease it.
371 set max-dcc 50
372
373 # Enable this setting if you want to enable the 'dccsimul' Tcl command.
374 set enable-simul 1
375
376 # Enable this setting if you want +d & +k users to use commands bound as -|-.
377 set allow-dk-cmds 1
378
379 # If your Eggdrop rejects bots that actually have already disconnected from
380 # another hub, but the disconnect information has not yet spread over the
381 # botnet due to lag, use this setting. The bot will wait dupwait-timeout
382 # seconds before it checks again and then finally reject the bot.
383 set dupwait-timeout 5
384
385 # You MUST remove this line for your bot to start. This has been added to
386 # prevent you from starting up a bot that is not fully configured. Bots
387 # that have not been fully configured may join the wrong IRC network, the
388 # wrong channels, or generally do things that you do not want. Please make
389 # sure that you have double-checked every setting. There's also a similar line
390 # lower down, just to make sure you're reading :)
391 die "Please make sure you edit your config file completely."
392
393
394 ##### MODULES #####
395
396 # Below are various settings for the modules included with Eggdrop.
397 # PLEASE READ AND EDIT THEM CAREFULLY, even if you're an old hand at
398 # Eggdrop, things change.
399
400 # This path specifies the path were Eggdrop should look for its modules.
401 # If you run the bot from the compilation directory, you will want to set
402 # this to "". If you use 'make install' (like all good kiddies do ;), this
403 # is a fine default. Otherwise, use your head :)
404 set mod-path "modules/"
405
406
407 #### DNS MODULE ####
408
409 # This module provides asynchronous dns support. This will avoid long
410 # periods where the bot just hangs there, waiting for a hostname to
411 # resolve, which will often let it timeout on all other connections.
412 loadmodule dns
413
414 #### CHANNELS MODULE ####
415
416 # This module provides channel related support for the bot. Without it,
417 # you won't be able to make the bot join a channel or save channel
418 # specific userfile information.
419 loadmodule channels
420
421 # Enter here the filename where dynamic channel settings are stored.
422 set chanfile "LamestBot.chan"
423
424 # Set this setting to 1 if you want your bot to expire bans/exempts/invites set
425 # by other opped bots on the channel.
426 set force-expire 0
427
428 # Set this setting to 1 if you want your bot to share user greets with other
429 # bots on the channel if sharing user data.
430 set share-greet 0
431
432 # Set this setting to 1 if you want to allow users to store an info line.
433 set use-info 1
434
435 # The following settings are used as default values when you .+chan #chan or .tcl
436 # channel add #chan. Look in the section below for explanation of every option.
437
438 set global-flood-chan 10:60
439 set global-flood-deop 3:10
440 set global-flood-kick 3:10
441 set global-flood-join 5:60
442 set global-flood-ctcp 3:60
443 set global-flood-nick 5:60
444 set global-aop-delay 5:30
445 set global-idle-kick 0
446 set global-chanmode "nt"
447 set global-stopnethack-mode 0
448 set global-revenge-mode 0
449 set global-ban-time 120
450 set global-exempt-time 60
451 set global-invite-time 60
452
453 set global-chanset {
454 -autoop -autovoice
455 -bitch +cycle
456 +dontkickops +dynamicbans
457 +dynamicexempts +dynamicinvites
458 -enforcebans +greet
459 -inactive -nodesynch
460 -protectfriends +protectops
461 -revenge -revengebot
462 -secret -seen
463 +shared +statuslog
464 +userbans +userexempts
465 +userinvites -protecthalfops
466 -autohalfop
467 }
468
469 # Add each static channel you want your bot to sit in using the following
470 # command. There are many different possible settings you can insert into
471 # this command, which are explained below.
472 #
473 # channel add #lamest {
474 # chanmode "+nt-likm"
475 # idle-kick 0
476 # stopnethack-mode 0
477 # revenge-mode 0
478 # ban-time 120
479 # exempt-time 60
480 # invite-time 60
481 # aop-delay 5:30
482 # need-op { putserv "PRIVMSG #lamest :op me cos i'm lame!" }
483 # need-invite { putserv "PRIVMSG #lamest :let me in!" }
484 # need-key { putserv "PRIVMSG #lamest :let me in!" }
485 # need-unban { putserv "PRIVMSG #lamest :let me in!" }
486 # need-limit { putserv "PRIVMSG #lamest :let me in!" }
487 # flood-chan 10:60
488 # flood-deop 3:10
489 # flood-kick 3:10
490 # flood-join 5:60
491 # flood-ctcp 3:60
492 # flood-nick 5:60
493 # }
494 #
495 # chanmode +/-<modes>
496 # This setting makes the bot enforce channel modes. It will always add
497 # the +<modes> and remove the -<modes> modes.
498 # idle-kick 0
499 # This setting will make the bot check every minute for idle
500 # users. Set this to 0 to disable idle check.
501 #
502 # stopnethack-mode 0
503 # This setting will make the bot de-op anyone who enters the channel
504 # with serverops. There're seven different modes for this settings:
505 # 0 turn off,
506 # 1 isoptest (allow serverop if registered op)
507 # 2 wasoptest (allow serverop if op before split)
508 # 3 allow serverop if isop or wasop
509 # 4 allow serverop if isop and wasop.
510 # 5 If the channel is -bitch, see stopnethack-mode 3
511 # If the channel is +bitch, see stopnethack-mode 1
512 # 6 If the channel is -bitch, see stopnethack-mode 2
513 # If the channel is +bitch, see stopnethack-mode 4
514 #
515 # revenge-mode 0
516 # This settings defines how the bot should punish bad users when
517 # revenging. There are four possible settings:
518 # 0 Deop the user.
519 # 1 Deop the user and give them the +d flag for the channel.
520 # 2 Deop the user, give them the +d flag for the channel, and kick them.
521 # 3 Deop the user, give them the +d flag for the channel, kick, and ban them.
522 #
523 # ban-time 120
524 # Set here how long temporary bans will last (in minutes). If you
525 # set this setting to 0, the bot will never remove them.
526 #
527 # exempt-time 60
528 # Set here how long temporary exempts will last (in minutes). If you
529 # set this setting to 0, the bot will never remove them. The bot will
530 # check the exempts every X minutes, but will not remove the exempt if
531 # a ban is set on the channel that matches that exempt. Once the ban is
532 # removed, then the exempt will be removed the next time the bot checks.
533 # Please note that this is an IRCnet feature.
534 #
535 # invite-time 60
536 # Set here how long temporary invites will last (in minutes). If you
537 # set this setting to 0, the bot will never remove them. The bot will
538 # check the invites every X minutes, but will not remove the invite if
539 # a channel is set to +i. Once the channel is -i then the invite will be
540 # removed the next time the bot checks. Please note that this is an IRCnet
541 # feature.
542 #
543 # aop-delay (minimum:maximum)
544 # This is used for autoop, autohalfop, autovoice. If an op or voice joins a
545 # channel while another op or voice is pending, the bot will attempt to put
546 # both modes on one line.
547 # aop-delay 0 No delay is used.
548 # aop-delay X An X second delay is used.
549 # aop-delay X:Y A random delay between X and Y is used.
550 #
551 # need-op { putserv "PRIVMSG #lamest :op me cos i'm lame!" }
552 # This setting will make the bot run the script enclosed in brackets
553 # if it does not have ops. This must be shorter than 120 characters.
554 # If you use scripts like getops.tcl or botnetop.tcl, you don't need
555 # to set this setting.
556 #
557 # need-invite { putserv "PRIVMSG #lamest :let me in!" }
558 # This setting will make the bot run the script enclosed in brackets
559 # if it needs an invite to the channel. This must be shorter than 120
560 # characters. If you use scripts like getops.tcl or botnetop.tcl, you
561 # don't need to set this setting.
562 #
563 # need-key { putserv "PRIVMSG #lamest :let me in!" }
564 # This setting will make the bot run the script enclosed in brackets
565 # if it needs the key to the channel. This must be shorter than 120
566 # characters. If you use scripts like getops.tcl or botnetop.tcl, you
567 # don't need to set this setting
568 #
569 # need-unban { putserv "PRIVMSG #lamest :let me in!" }
570 # This setting will make the bot run the script enclosed in brackets
571 # if it needs to be unbanned on the channel. This must be shorter than
572 # 120 characters. If you use scripts like getops.tcl or botnetop.tcl,
573 # you don't need to set this setting
574 #
575 # need-limit { putserv "PRIVMSG #lamest :let me in!" }
576 # This setting will make the bot run the script enclosed in brackets
577 # if it needs the limit to be raised on the channel. This must be
578 # shorter than 120 characters. If you use scripts like getops.tcl or
579 # botnetop.tcl, you don't need to set this setting
580 #
581 # flood-chan 10:60
582 # Set here how many channel messages in how many seconds from one
583 # host constitutes a flood. Setting this to 0 or 0:0 disables
584 # flood protection for the channel.
585 #
586 # flood-deop 3:10
587 # Set here how many deops in how many seconds from one host constitutes
588 # a flood. Setting this to 0 or 0:0 disables deop flood protection for
589 # the channel.
590 #
591 # flood-kick 3:10
592 # Set here how many kicks in how many seconds from one host constitutes
593 # a flood. Setting this to 0 or 0:0 disables kick flood protection for
594 # the channel.
595 #
596 # flood-join 5:60
597 # Set here how many joins in how many seconds from one host constitutes
598 # a flood. Setting this to 0 or 0:0 disables join flood protection for
599 # the channel.
600 #
601 # flood-ctcp 3:60
602 # Set here how many channel ctcps in how many seconds from one host
603 # constitutes a flood. Setting this to 0 or 0:0 disables ctcp flood
604 # protection for the channel.
605 #
606 # flood-nick 5:60
607 # Set here how many nick changes in how many seconds from one host
608 # constitutes a flood. Setting this to 0 or 0:0 disables nick flood
609 # protection for the channel.
610 #
611 # There are many different options for channels which you can
612 # define. They can be enabled or disabled using the channel set command by a
613 # plus or minus in front of them.
614 #
615 # channel set #lamest +enforcebans +dynamicbans +userbans +dynamicexempts
616 # channel set #lamest +userexempts +dynamicinvites +userinvites +protectops
617 # channel set #lamest +protectfriends +statuslog +revenge -protecthalfops
618 # channel set #lamest +revengebot +dontkickops +autovoice -autoop -autohalfop
619 # channel set #lamest -bitch -secret -shared +greet +cycle
620 #
621 # A complete list of all available channel settings:
622 #
623 # enforcebans
624 # When a ban is set, kick people who are on the channel and match
625 # the ban?
626 #
627 # dynamicbans
628 # Only activate bans on the channel when necessary? This keeps
629 # the channel's ban list from getting excessively long. The bot
630 # still remembers every ban, but it only activates a ban on the
631 # channel when it sees someone join who matches that ban.
632 #
633 # userbans
634 # Allow bans to be made by users directly? If turned off, the bot
635 # will require all bans to be made through the bot's console.
636 #
637 # dynamicexempts
638 # Only activate exempts on the channel when necessary? This keeps
639 # the channel's exempt list from getting excessively long. The bot
640 # still remembers every exempt, but it only activates a exempt on
641 # the channel when it sees a ban set that matches the exempt. The
642 # exempt remains active on the channel for as long as the ban is
643 # still active.
644 #
645 # userexempts
646 # Allow exempts to be made by users directly? If turned off, the
647 # bot will require all exempts to be made through the bot's console.
648 #
649 # dynamicinvites
650 # Only activate invites on the channel when necessary? This keeps
651 # the channel's invite list from getting excessively long. The bot
652 # still remembers every invite, but the invites are only activated
653 # when the channel is set to invite only and a user joins after
654 # requesting an invite. Once set, the invite remains until the
655 # channel goes to -i.
656 #
657 # userinvites
658 # Allow invites to be made by users directly? If turned off, the
659 # bot will require all invites to be made through the bot's console.
660 #
661 # autoop
662 # Op users with the +o flag as soon as they join the channel?
663 # This is insecure and not recommended.
664 #
665 # autohalfop
666 # Halfop users with the +l flag as soon as they join the channel?
667 # This is insecure and not recommended.
668 #
669 # bitch
670 # Only let users with +o) flag be opped on the channel?
671 #
672 # greet
673 # Say a user's info line when they join the channel?
674 #
675 # protectops
676 # Re-op a user with the +o flag if they get deopped?
677 #
678 # protecthalfops
679 # Re-halfop a user with the +l flag if they get dehalfopped?
680 #
681 # protectfriends
682 # Re-op a user with the +f flag if they get deopped?
683 #
684 # statuslog
685 # Log the channel status line every 5 minutes? This shows the bot's
686 # status on the channel (op, voice, etc.), The channel's modes, and
687 # the number of +m/+o/+v/+n/+b/+e/+I users on the channel. A sample
688 # status line follows:
689 #
690 # [01:40] @#lamest (+istn) : [m/1 o/1 v/4 n/7 b/1 e/5 I/7]
691 #
692 # revenge
693 # Remember people who deop/kick/ban the bot, valid ops, or friends
694 # and punish them? Users with the +f flag are exempt from revenge.
695 #
696 # revengebot
697 # This is similar to to the 'revenge' option, but it only triggers
698 # if a bot gets deopped, kicked or banned.
699 #
700 # autovoice
701 # Voice users with the +v flag when they join the channel?
702 #
703 # secret
704 # Prevent this channel from being listed on the botnet?
705 #
706 # shared
707 # Share channel-related user info for this channel?
708 #
709 # cycle
710 # Cycle the channel when it has no ops?
711 #
712 # dontkickops
713 # Do you want the bot not to be able to kick users who have the +o
714 # flag, letting them kick-flood for instance to protect the channel
715 # against clone attacks.
716 #
717 # inactive
718 # This prevents the bot from joining the channel (or makes it leave
719 # the channel if it is already there). It can be useful to make the
720 # bot leave a channel without losing its settings, channel-specific
721 # user flags, channel bans, and without affecting sharing.
722 #
723 # seen
724 # Respond to seen requests in the channel? The seen module must be
725 # loaded for this to work.
726 #
727 # nodesynch
728 # Allow non-ops to perform channel modes? This can stop the bot from
729 # fighting with services such as ChanServ, or from kicking IRCops when
730 # setting channel modes without having ops.
731 #
732 # Here is a shorter example:
733 #
734 # channel add #botcentral {
735 # chanmode "+mntisl 1"
736 # idle-kick 1
737 # }
738 # channel set #botcentral +bitch +enforcebans -greet +revenge
739
740
741 #### SERVER MODULE ####
742
743 # This module provides the core server support. You have to load this
744 # if you want your bot to come on IRC. Not loading this is equivalent
745 # to the old NO_IRC define.
746 loadmodule server
747
748 # What is your network?
749 # 0 = EFnet (non +e/+I Hybrid)
750 # 1 = IRCnet
751 # 2 = Undernet
752 # 3 = DALnet
753 # 4 = EFnet +e/+I Hybrid
754 # 5 = Others
755 set net-type 0
756
757 # Set the nick the bot uses on IRC, and on the botnet
758 # unless you specify a separate botnet-nick, here.
759
760 set nick "Lamestbot"
761
762 # Set the alternative nick which the bot uses on IRC if the nick specified
763 # by 'set nick' is unavailable. All '?' characters will be replaced by random
764 # numbers.
765
766 set altnick "Llamab?t"
767
768 # Set what should be displayed in the real-name field for the bot on IRC.
769 set realname "/msg LamestBot hello"
770
771 # Set here a script to run (if any) when first connecting to a server.
772 # This is limited to 120 characters.
773 set init-server { putserv "MODE $botnick +i-ws" }
774
775 # Set the default port which should be used if none is specified with
776 # '.jump' or in 'set servers'.
777 set default-port 6667
778
779 # This is the bot's server list. The bot will start at the first server listed,
780 # and cycle through them whenever it gets disconnected. You need to change these
781 # servers to YOUR network's servers.
782 #
783 # The format is:
784 # server[:port[:password]]
785 #
786 # Both the port and password fields are optional; however, if you want to set a
787 # password you must also set a port. If a port isn't specified it will default to
788 # your default-port setting.
789 set servers {
790 you.need.to.change.this:6667
791 another.example.com:7000
792 }
793
794 # This setting makes the bot try to get his original nickname back if its
795 # primary nickname is already in use.
796 set keep-nick 1
797
798 # Set this to 1 if you don't want your the bot to strip a leading '~'
799 # on user@hosts.
800 set strict-host 0
801
802 # This setting makes the bot squelch the error message when rejecting a DCC
803 # CHAT, SEND or message command. Normally, Eggdrop notifies the user that the
804 # command has been rejected because they don't have access. Note that sometimes
805 # IRC server operators detect bots that way.
806 set quiet-reject 1
807
808 # If you want your bot to answer lower case ctcp requests (non rfc-
809 # compliant), set this setting to 1. mIRC will do this, most other
810 # clients will not.
811 set lowercase-ctcp 0
812
813 # Set how many ctcps should be answered at once.
814 set answer-ctcp 3
815
816 # Set here how many msgs in how many seconds from one host constitutes
817 # a flood. If you set this to 0:0, msg flood protection will be disabled.
818 set flood-msg 5:60
819
820 # Set here how many ctcps in how many seconds from one host constitutes
821 # a flood. If you set this to 0:0, ctcp flood protection will be disabled.
822 set flood-ctcp 3:60
823
824 # This settings makes the bot cycle forever through the server list until
825 # it successfully connects to one.
826 set never-give-up 1
827
828 # This setting defines how long Eggdrop should wait before moving from one
829 # server to another on disconnect. If you set 0 here, Eggdrop will not wait
830 # at all and will connect instantly. Setting this too low could result in
831 # your bot being K:Lined.
832 set server-cycle-wait 60
833
834 # Set here how long Eggdrop should wait for a response when connecting to a
835 # server before giving up and moving on to next server.
836 set server-timeout 60
837
838 # If the number of servers on the net gets below this number, the bot
839 # will jump to a new server (it will assume it's on the losing end of
840 # a netsplit). Set this to 0 to turn off. If your bot is running on
841 # any major IRC network, this should probably be turned off.
842 set servlimit 0
843
844 # Set this to 1 if Eggdrop should check for stoned servers? (where the
845 # server connection has died, but Eggdrop hasn't been notified yet).
846 set check-stoned 1
847
848 # This setting allows you the logging of all information received from the
849 # server via console mode 'r'.
850 # NOTE: This is a large security hole, allowing people to see user passwords.
851 # This is now restricted to +n users only. Please choose your owners with
852 # care.
853 set use-console-r 0
854
855 # This setting allows you the logging of all information sent to the server
856 # via console/log mode 'v'. It also allows logging of botnet traffic via
857 # console/log mode 't'.
858 # NOTE: This is a large security hole, allowing people to see passwords.
859 # This is now restricted to +n users only. Please choose your owners with
860 # care.
861 set debug-output 0
862
863 # If you want your bot to exit the server if it receives an ERROR message,
864 # set this to 1.
865 set serverror-quit 1
866
867 # Set here the maximum number of lines to queue to the server. If you're
868 # going to dump large chunks of text to people over IRC, you will probably
869 # want to raise this. 300 is fine for most people though.
870 set max-queue-msg 300
871
872 # If you want Eggdrop to trigger binds for ignored users, set this to 1.
873 set trigger-on-ignore 0
874
875 # Allow identical messages in the mode queue?
876 set double-mode 0
877
878 # Allow identical messages in the server queue?
879 set double-server 0
880
881 # Allow identical messages in the help queue?
882 set double-help 0
883
884 # This optimizes the kick queue. It also traces nick changes and parts in
885 # the channel and changes the kick queue accordingly. There are three
886 # different options for this setting:
887 # 0 = Turn it off.
888 # 1 = Optimize the kick queue by summarizing kicks.
889 # 2 = Trace nick changes and parts on the channel and change the queue
890 # accordingly. For example, bot will not try to kick users who have
891 # already parted the channel.
892 # ATTENTION: Setting 2 is very CPU intensive.
893 set optimize-kicks 1
894
895 # If your network supports more recipients per command then 1, you can
896 # change this behavior here. Set this to the number of recipients per
897 # command, or set this to 0 for unlimited.
898 set stack-limit 4
899
900 ### SERVER MODULE - OTHER NETWORKS (net-type 5) ###
901
902 # This settings defines how umode +r is understood by Eggdrop. Some
903 # networks use +r to indicate a restricted connection. If this is your
904 # case, and you want your bot to leave restricted servers and jump to
905 # the next server on its list, then set it to 1.
906 #set check-mode-r 1
907
908 # This setting allows you to specify the maximum nick-length supported by
909 # your network. The default setting is 9. The maximum supported length by
910 # Eggdrop is 32.
911 #set nick-len 9
912
913 #### CTCP MODULE ####
914
915 # This module provides the normal ctcp replies that you'd expect.
916 # Without it loaded, CTCP CHAT will not work. The server module
917 # is required for this module to function.
918 loadmodule ctcp
919
920 # Set here how the ctcp module should answer ctcps. There are 3 possible
921 # operating modes:
922 # 0: Normal behavior is used.
923 # 1: The bot ignores all ctcps, except for CHAT and PING requests
924 # by users with the +o flag.
925 # 2: Normal behavior is used, however the bot will not answer more
926 # than X ctcps in Y seconds (defined by 'set flood-ctcp').
927 set ctcp-mode 0
928
929 # There are also several variables to help make your bot less noticeable.
930 # They are: ctcp-version, ctcp-finger, and ctcp-userinfo. You can use set to set
931 # them to values you'd like.
932
933
934 #### IRC MODULE ####
935
936 # This module provides basic IRC support for your bot. You have to
937 # load this if you want your bot to come on IRC. The server and channels
938 # modules must be loaded for this module to function.
939 loadmodule irc
940
941 # Set this to 1 if you want to bounce all server bans.
942 set bounce-bans 1
943
944 # Set this to 1 if you want to bounce all server modes.
945 set bounce-modes 0
946
947 # Set here the maximum number of bans you want the bot to set on a channel.
948 # Eggdrop will not place any more bans if this limit is reached. Undernet
949 # currently allows 45 bans, IRCnet allows 30, EFnet allows 20, and DALnet
950 # allows 100.
951 set max-bans 20
952
953 # There is a global limit for +b/+e/+I modes. This limit should be set to
954 # the same value as max-bans for networks that do not support +e/+I.
955 set max-modes 30
956
957 # Set this to 1 if you want the bot to kick for control character/ctcp
958 # avalanches to a channel. Remember that if it does, it won't ban them.
959 # This can start kick floods.
960 set kick-fun 0
961
962 # Set this to 1 if you want the bot to ban for control character/ctcp
963 # avalanches to a channel. This can prevent kick floods, but it also can
964 # fill the banlist.
965 set ban-fun 0
966
967 # If you want people to be able to add themselves to the bot's userlist
968 # with the default userflags (defined above in the config file) via the
969 # 'hello' msg command, set this to 1.
970 set learn-users 0
971
972 # Set here the time (in seconds) to wait for someone to return from
973 # a netsplit (i.e. wasop will expire afterwards). Set this to 1500
974 # on IRCnet since its nick delay stops after 30 minutes.
975 set wait-split 600
976
977 # Set here the time (in seconds) that someone must have been off-channel
978 # before re-displaying their info line.
979 set wait-info 180
980
981 # Set this to the maximum number of bytes to send in the arguments
982 # of modes sent to the server. Most servers default this to 200.
983 set mode-buf-length 200
984
985 # Many IRCops find bots by seeing if they reply to 'hello' in a msg.
986 # You can change this to another word by un-commenting the following
987 # two lines and changing "myword" to the word wish to use instead of
988 # 'hello'. It must be a single word.
989 #unbind msg - hello *msg:hello
990 #bind msg - myword *msg:hello
991
992 # Many takeover attempts occur due to lame users blindly /msg ident'ing to
993 # the bot and attempting to guess passwords. We now unbind this command by
994 # default to discourage them. You can enable these commands by commenting the
995 # following two lines.
996 unbind msg - ident *msg:ident
997 unbind msg - addhost *msg:addhost
998
999 # If you are so lame you want the bot to display peoples info lines, even
1000 # when you are too lazy to add their chanrecs to a channel, set this to 1.
1001 # *NOTE* This means *every* user with an info line will have their info
1002 # line displayed on EVERY channel they join (provided they have been gone
1003 # longer than wait-info).
1004 set no-chanrec-info 0
1005
1006 ### IRC MODULE - IRCnet SPECIFIC FEATURES (net-type 1) ###
1007
1008 # Attention: Use these settings *only* if you set 'net-type' to 1!
1009
1010 # Set this to 1 if you want to bounce all server exemptions (+e modes).
1011 set bounce-exempts 0
1012
1013 # Set this to 1 if you want to bounce all server invitations (+I modes).
1014 set bounce-invites 0
1015
1016 # Set here the maximum number of exempts you want Eggdrop to set
1017 # on a channel. Eggdrop will not place any more exempts if this
1018 # limit is reached.
1019 set max-exempts 20
1020
1021 # Set here the maximum number of invites you want Eggdrop to set
1022 # on a channel. Eggdrop will not place any more invites if this
1023 # limit is reached.
1024 set max-invites 20
1025
1026 # The following settings should be left commented unless the default values
1027 # are being overridden. By default, exempts and invites are on for IRCnet,
1028 # but off for all other large networks. This behavior can be modified with
1029 # the following 2 flags. If your network doesn't support +e/+I modes then you
1030 # will be unable to use these features.
1031 #
1032 # Do you want to enable exempts?
1033 #set use-exempts 0
1034
1035 # Do you want to use invites?
1036 #set use-invites 0
1037
1038 # At the moment, the current IRCnet IRCd version (2.10) doesn't support the mixing
1039 # of b,o and v modes with e and I modes. This might be changed in the future, so
1040 # use 1 at the moment for this setting.
1041 set prevent-mixing 1
1042
1043 ### IRC MODULE - OTHER NETWORKS (net-type 5) ###
1044
1045 # Attention: Use these settings *only* if you set 'net-type' to 5!
1046
1047 # If your network supports more users per kick command then 1, you can
1048 # change this behavior here. Set this to the number of users to kick at
1049 # once, or set this to 0 for all at once.
1050 #set kick-method 1
1051
1052 # Some networks allow you to stack lots of channel modes into one line.
1053 # They're all guaranteed to support at least 3, so that's the default.
1054 # If you know your network supports more, you may want to adjust this.
1055 # This setting is limited to 6, although if you want to use a higher value,
1056 # you can modify this by changing the value of MODES_PER_LINE_MAX in
1057 # src/chan.h and recompiling the bot.
1058 #set modes-per-line 3
1059
1060 # Some networks don't include the +l limit and +k or -k key modes
1061 # in the modes-per-line (see above) limitation. Set include-lk to 0 for
1062 # these networks.
1063 #set include-lk 1
1064
1065 # Set this to 1 if your network uses IRCu2.10.01 specific /who requests.
1066 # Eggdrop can, therefore, ask only for exactly what's needed.
1067 #set use-354 0
1068
1069 # If your network doesn't use rfc 1459 compliant string matching routines,
1070 # set this to 0.
1071 #set rfc-compliant 1
1072
1073
1074 #### TRANSFER MODULE ####
1075
1076 # The transfer module provides dcc send/get support and userfile transfer
1077 # support for userfile sharing. Un-comment the next line to load it if you
1078 # need this functionality.
1079 #loadmodule transfer
1080
1081 # Set here the maximum number of simultaneous downloads to allow for
1082 # each user.
1083 set max-dloads 3
1084
1085 # Set here the block size for dcc transfers. ircII uses 512 bytes,
1086 # but admits that it may be too small. 1024 is standard these days.
1087 # 0 is turbo-dcc (recommended).
1088 set dcc-block 0
1089
1090 # Enable this setting if you want to copy files into the /tmp directory
1091 # before sending them. This is useful on most systems for file stability,
1092 # but if your directories are NFS mounted, it's a pain, and you'll want
1093 # to set this to 0. If you are low on disk space, you may also want to
1094 # set this to 0.
1095 set copy-to-tmp 1
1096
1097 # Set here the time (in seconds) to wait before an inactive transfer
1098 # times out.
1099 set xfer-timeout 30
1100
1101
1102 #### SHARE MODULE ####
1103
1104 # This module provides userfile sharing support between two directly
1105 # linked bots. The transfer and channels modules are required for this
1106 # module to correctly function. Un-comment the following line to load
1107 # the share module.
1108 #loadmodule share
1109
1110 # Settings in this section must be un-commented before setting.
1111
1112 # When two bots get disconnected, this setting allows them to create a
1113 # resync buffer which saves all changes done to the userfile during
1114 # the disconnect. When they reconnect, they will not have to transfer
1115 # the complete user file, but, instead, just send the resync buffer.
1116 #
1117 # NOTE: This has been known to cause loss of channel flags and other
1118 # problems. Using this setting is not recommended.
1119 #set allow-resync 0
1120
1121 # This setting specifies how long to hold another bots resync data
1122 # before flushing it.
1123 #set resync-time 900
1124
1125 # When sharing user lists, DON'T ACCEPT global flag changes from other bots?
1126 # NOTE: The bot will still send changes made on the bot, it just won't accept
1127 # any global flag changes from other bots.
1128 #set private-global 0
1129
1130 # When sharing user lists, if private-global isn't set, which global flag
1131 # changes from other bots should be ignored?
1132 #set private-globals "mnot"
1133
1134 # When sharing user lists, don't accept ANY userfile changes from other
1135 # bots? Paranoid people should use this feature on their hub bot. This
1136 # will force all userlist changes to be made via the hub.
1137 #set private-user 0
1138
1139 # This setting makes the bot discard its own bot records in favor of
1140 # the ones sent by the hub.
1141 # NOTE: No passwords or botflags are shared, only ports and
1142 # address are added to sharing procedure. This only works with hubs that
1143 # are v1.5.1 or higher.
1144 #set override-bots 0
1145
1146
1147 #### COMPRESS MODULE ####
1148
1149 # This module provides provides support for file compression. This allows the
1150 # bot to transfer compressed user files and therefore save a significant amount
1151 # of bandwidth. The share module must be loaded to load this module. Un-comment
1152 # the following line to the compress module.
1153 #loadmodule compress
1154
1155 # Allow compressed sending of user files? The user files are
1156 # compressed with the compression level defined in `compress-level'.
1157 set share-compressed 1
1158
1159 # This is the default compression level used.
1160 #set compress-level 9
1161
1162
1163 #### FILESYSTEM MODULE ####
1164
1165 # This module provides an area within the bot where users can store
1166 # files. With this module, the bot is usable as a file server. The
1167 # transfer module is required for this module to function. Un-comment
1168 # the following line to load the filesys module.
1169 #loadmodule filesys
1170
1171 # Set here the 'root' directory for the file system.
1172 set files-path "/home/mydir/filesys"
1173
1174 # If you want to allow uploads, set this to the directory uploads
1175 # should be put into. Set this to "" if you don't want people to
1176 # upload files to your bot.
1177 set incoming-path "/home/mydir/filesys/incoming"
1178
1179 # If you don't want to have a central incoming directory, but instead
1180 # want uploads to go to the current directory that a user is in, set
1181 # this setting to 1.
1182 set upload-to-pwd 0
1183
1184 # Eggdrop creates a '.filedb' file in each subdirectory of your file area
1185 # to keep track of its own file system information. If you can't do that (for
1186 # example, if the dcc path isn't owned by you, or you just don't want it to do
1187 # that) specify a path here where you'd like all of the database files to be
1188 # stored instead.
1189 set filedb-path ""
1190
1191 # Set here the maximum number of people that can be in the file area at once.
1192 # Setting this to 0 makes it effectively infinite.
1193 set max-file-users 20
1194
1195 # Set here the maximum allowable file size that will be received (in kb).
1196 # Setting this to 0 makes it effectively infinite.
1197 set max-filesize 1024
1198
1199
1200 #### NOTES MODULE ####
1201
1202 # This module provides support for storing of notes for users from each
1203 # other. Note sending between currently online users is supported in the
1204 # core, this is only for storing the notes for later retrieval.
1205 loadmodule notes
1206
1207 # Set here the filename where private notes between users are stored.
1208 set notefile "LamestBot.notes"
1209
1210 # Set here the maximum number of notes to allow to be stored for
1211 # each user (to prevent flooding).
1212 set max-notes 50
1213
1214 # Set here how long (in days) to store notes before expiring them.
1215 set note-life 60
1216
1217 # Set this to 1 if you want to allow users to specify a forwarding
1218 # address for forwarding notes to another account on another bot.
1219 set allow-fwd 0
1220
1221 # Set this to 1 if you want the bot to let people know hourly if they
1222 # have any notes.
1223 set notify-users 1
1224
1225 # Set this to 1 if you want the bot to let people know on join if they
1226 # have any notes.
1227 set notify-onjoin 1
1228
1229 # Comment out this next line. Otherwise, your bot won't start.
1230 die "You didn't edit your config file completely like you were told, did you?"
1231
1232
1233 #### CONSOLE MODULE ####
1234
1235 # This module provides storage of console settings when you exit the
1236 # bot or type .store on the partyline.
1237 loadmodule console
1238
1239 # Save users console settings automatically? Otherwise, they have
1240 # to use the .store command.
1241 set console-autosave 1
1242
1243 # If a user doesn't have any console settings saved, which channel
1244 # do you want them automatically put on?
1245 set force-channel 0
1246
1247 # Enable this setting if a user's global info line should be displayed
1248 # when they join a botnet channel.
1249 set info-party 0
1250
1251
1252 #### WOOBIE MODULE ####
1253
1254 # This is for demonstrative purposes only. If you are looking for starting
1255 # point in writing modules, woobie is the right thing.
1256 #loadmodule woobie
1257
1258
1259 #### SEEN MODULE ####
1260
1261 # This module provides very basic seen commands via msg, on channel or via dcc.
1262 # This module works only for users in the bot's userlist. If you are looking for
1263 # a better and more advanced seen module, try the gseen module by G'Quann. You
1264 # can find it at http://www.visions-of-fantasy.de/gseen.mod/.
1265 #loadmodule seen
1266
1267
1268 #### BLOWFISH MODULE ####
1269
1270 # IF YOU DON'T READ THIS YOU MAY RENDER YOUR USERFILE USELESS LATER
1271 # Eggdrop encrypts its userfile, so users can have secure passwords.
1272 # Please note that when you change your encryption method later (i.e.
1273 # using other modules like a md5 module), you can't use your current
1274 # userfile anymore. Eggdrop will not start without an encryption module.
1275 #loadmodule blowfish
1276
1277
1278 #### ASSOC MODULE ####
1279
1280 # This module provides assoc support, i.e. naming channels on the botnet.
1281 # You can load it by un-commenting the following line.
1282 #loadmodule assoc
1283
1284
1285 #### WIRE MODULE ####
1286
1287 # This module provides all the standard .wire commands via dcc. It is an
1288 # encrypted partyline communication tool, compatible with wire.tcl. An
1289 # encryption module must be loaded to use this module. Un-comment the
1290 # following line to load the wire module.
1291 #loadmodule wire
1292
1293 #### UPTIME MODULE ####
1294
1295 # This module reports uptime statistics to http://uptime.eggheads.org.
1296 # Go look and see what your uptime is! It takes about 9 hours to show up,
1297 # so if your bot isn't listed, try again later. The server module must be
1298 # loaded for this module to function.
1299 #
1300 # Information sent to the server includes the bot's uptime, botnet-nick,
1301 # server, version, and IP address. This information is stored in a temporary
1302 # logfile for debugging purposes only. The only publicly available information
1303 # will be the bot's botnet-nick, version and uptime. If you do not wish for this
1304 # information to be sent, comment out the following line.
1305 loadmodule uptime
1306
1307 ##### SCRIPTS #####
1308
1309 # This is a good place to load scripts to use with your bot.
1310
1311 # This line loads script.tcl from the scripts directory inside your Eggdrop's
1312 # directory. All scripts should be put there, although you can place them where
1313 # you like as long as you can supply a fully qualified path to them.
1314 #
1315 # source scripts/script.tcl
1316
1317 source scripts/alltools.tcl
1318 source scripts/action.fix.tcl
1319
1320 # Use this script for Tcl and Eggdrop downwards compatibility.
1321 # NOTE: This can also cause problems with some newer scripts.
1322 source scripts/compat.tcl
1323
1324 # This script provides many useful informational functions, like setting
1325 # users' URLs, e-mail address, ICQ numbers, etc. You can modify it to add
1326 # extra entries.
1327 source scripts/userinfo.tcl
1328 loadhelp userinfo.help

webmaster@eggheads.org
ViewVC Help
Powered by ViewVC 1.1.23