/[cvs]/eggdrop1.6/eggdrop.conf
ViewVC logotype

Annotation of /eggdrop1.6/eggdrop.conf

Parent Directory Parent Directory | Revision Log Revision Log | View Revision Graph Revision Graph


Revision 1.10 - (hide annotations) (download)
Wed Jan 15 01:03:04 2003 UTC (16 years, 9 months ago) by wcc
Branch: MAIN
Changes since 1.9: +1 -7 lines
Removed strict-servernames. $server is now always the server's realname and
$serveraddress is it's server list entry.

1 wcc 1.1 #! /path/to/executable/eggdrop
2     # ^- This should contain a fully qualified path to your Eggdrop executable.
3     #
4 wcc 1.10 # $Id: eggdrop.conf,v 1.9 2002/12/27 22:48:49 wcc Exp $
5 wcc 1.1 #
6     # This is a sample Eggdrop configuration file which includes all possible
7     # settings that can be used to configure your bot.
8     #
9 wcc 1.8 # The pound signs (#) that you see at the beginning of some lines mean that
10     # the remainder of that line is a comment, or just for your information. By
11     # adding or deleting pound signs, you can comment or uncomment a setting,
12     # respectively.
13     #
14 wcc 1.1 # More detailed descriptions of all these settings can be found in
15     # doc/settings/.
16    
17    
18     ##### BASIC SETTINGS #####
19    
20     # This setting defines the username the bot uses on IRC. This setting has
21     # no effect if an ident daemon is running on your bot's machine.
22     set username "lamest"
23    
24     # This setting defines which contact person should be shown in .status,
25     # /msg help, and other places. You really should include this information.
26     set admin "Lamer <email: lamer@lamest.lame.org>"
27    
28     # This setting is used only for info to share with others on your botnet.
29     # Set this to the IRC network your bot is connected to.
30     set network "I.didn't.edit.my.config.file.net"
31    
32     # This setting defines the timezone is your bot in. It's used for internal
33     # routines as well as for logfile timestamping and scripting purposes.
34     # The timezone string specifies the name of the timezone and must be three
35     # or more alphabetic characters. For example, Central European Time(UTC+1)
36     # should be "CET".
37     set timezone "EST"
38    
39     # The offset setting specifies the time value to be added to the local
40     # time to get Coordinated Universal Time (UTC aka GMT). The offset is
41     # positive if the local timezone is west of the Prime Meridian and
42     # negative if it is east. The value (in hours) must be between -23 and
43     # 23. For example, if the timezone is UTC+1, the offset is -1.
44     set offset "5"
45    
46     # If you don't want to use the timezone setting for scripting purposes only,
47     # but instead everywhere possible, un-comment the following line.
48     #set env(TZ) "$timezone $offset"
49    
50     # If you're using virtual hosting (your machine has more than 1 IP), you
51     # may want to specify the particular IP to bind to. You can specify either
52     # by hostname or by IP. You may also want to set the hostname here if
53     # Eggdrop has trouble detecting it when it starts up.
54     #set my-hostname "virtual.host.com"
55     #set my-ip "99.99.0.0"
56    
57     # If you want to have your Eggdrop messages displayed in a language other
58     # than English, change this setting to match your preference. An alternative
59     # would be to set the environment variable EGG_LANG to that value.
60     #addlang "english"
61    
62    
63     ##### LOG FILES #####
64    
65     # Eggdrop is capable of logging various things, from channel chatter to
66     # commands people use on the bot and file transfers. Logfiles are normally
67     # kept for 24 hours. Afterwards, they will be renamed to "(logfile).yesterday".
68     # After 48 hours, they will be overwritten by the logfile of the next day.
69     #
70     # Events are logged by certain categories. This way, you can specify
71     # exactly what kind of events you want sent to various logfiles.
72     #
73     # The most common log file flags are:
74     # m private msgs/ctcps to the bot
75     # k kicks, bans, mode changes on the channel
76     # j joins, parts, netsplits on the channel
77     # p public chatter on the channel
78     # s server connects/disconnects/notices
79     # b information about bot linking and userfile sharing
80     # c commands people use (via msg or dcc)
81     # x file transfers and file-area commands
82     # r (if use-console-r enabled) EVERYTHING sent to the bot by the server
83     # o other: misc info, errors -- IMPORTANT STUFF
84     # w wallops: msgs between IRCops (be sure to set the bot +w in init-server)
85     #
86     # There are others, but you probably shouldn't log them, it'd be rather
87     # unethical. ;) There are also eight user-defined levels (1-8) which
88     # are used by Tcl scripts.
89     #
90     # Each logfile belongs to a certain channel. Events of type 'k', 'j', and 'p'
91     # are logged to whatever channel they happened on. Most other events are
92     # currently logged to every channel. You can make a logfile belong to all
93     # channels by assigning it to channel "*".
94    
95     # This is the maximum number of logfiles allowed. This setting can be
96     # increased; however, don't decrease it.
97     set max-logs 5
98    
99     # This is the maximum size of your logfiles. Set it to 0 to disable.
100     # This value is in kilobytes, so '550' would mean cycle logs when it
101     # reaches the size of 550 kilobytes. Note that this only works if you
102     # have keep-all-logs 0 (OFF).
103     set max-logsize 0
104    
105     # This could be good if you have had problem with the logfile filling
106     # your quota/hard disk or if you log +p and publish it to the web and
107     # need more up-to-date info. Note that this setting might increase the
108     # CPU usage of your bot (on the other hand it will decrease your mem usage).
109     set quick-logs 0
110    
111     # This creates a logfile named eggdrop.log containing private msgs/ctcps,
112     # commands, errors, and misc. info from any channel.
113     logfile mco * "logs/eggdrop.log"
114    
115     # This creates a logfile named lamest.log containing joins, parts,
116     # netsplits, kicks, bans, mode changes, and public chat on the
117     # channel #lamest.
118     logfile jpk #lamest "logs/lamest.log"
119    
120     # Use this feature to timestamp entries in the log file.
121     set log-time 1
122    
123     # If you want to keep your logfiles forever, turn this setting on. All
124     # logfiles will get suffix ".[day, 2 digits][month, 3 letters][year, 4 digits]".
125     # Note that your quota/hard-disk might be filled by this, so check your logfiles
126     # often and download them.
127     set keep-all-logs 0
128    
129     # If keep-all-logs is 1, this setting will define the suffix of the logfiles.
130     # The default will result in a suffix like "04May2000". "%Y%m%d" will produce
131     # the often used yyyymmdd format. Read the strftime manpages for more options.
132     # NOTE: On systems which don't support strftime, the default format will
133     # be used _always_.
134     set logfile-suffix ".%d%b%Y"
135    
136 wcc 1.6 # You can specify when Eggdrop should switch logfiles and start fresh. You
137 wcc 1.1 # must use military time for this setting. 300 is the default, and describes
138     # 03:00 (AM).
139     set switch-logfiles-at 300
140    
141     # "Writing user file..." and "Writing channel file..." messages won't be
142     # logged anymore if this option is enabled.
143     set quiet-save 0
144    
145    
146     ##### CONSOLE #####
147    
148     # This is the default console mode. It uses the same event flags as the log
149     # files do. The console channel is automatically set to your "primary" channel,
150     # which is set in the modules section of the config file. Masters can change
151     # their console channel and modes with the '.console' command.
152    
153     set console "mkcobxs"
154    
155    
156     ##### FILES AND DIRECTORIES #####
157    
158     # Specify here the filename your userfile should be saved as.
159     set userfile "LamestBot.user"
160    
161     # Specify here the filename Eggdrop will save its pid to. If no pidfile is
162     # specified, pid.(botnet-nick) will be used.
163     #set pidfile "pid.LamestBot"
164    
165     # If you want your userfile to be sorted upon saving, enable this setting.
166     # This causes the bot to use bit more CPU when saving the usefile.
167     set sort-users 0
168    
169     # Specify here where Eggdrop should look for help files. Don't modify this
170     # setting unless you know what you're doing!
171     set help-path "help/"
172    
173     # Specify here where Eggdrop should look for text files. This is used for
174     # certain Tcl and DCC commands.
175     set text-path "text/"
176    
177     # Set here a place to store temporary files.
178     set temp-path "/tmp"
179    
180     # The MOTD (Message Of The day) is displayed when people dcc chat or telnet
181     # to the bot. Look at doc/text-substitutions.doc for options.
182     set motd "text/motd"
183    
184     # This banner will be displayed on telnet connections. Look at
185     # doc/text-substitutions.doc for options.
186     set telnet-banner "text/banner"
187    
188     # This specifies what permissions the user, channel, and notes files should
189     # be set to. The octal values are the same as for the chmod system command.
190     #
191     # To remind you:
192     #
193     # u g o u g o u g o
194     # 0600 rw------- 0400 r-------- 0200 -w------- u - user
195     # 0660 rw-rw---- 0440 r--r----- 0220 -w--w---- g - group
196     # 0666 rw-rw-rw- 0444 r--r--r-- 0222 -w--w--w- o - others
197     #
198     # Note that the default 0600 is the most secure one and should only be changed
199     # if you need your files for shell scripting or other external applications.
200     set userfile-perm 0600
201    
202    
203     ##### BOTNET/DCC/TELNET #####
204    
205     # Settings in this section should be unimportant for you until you deal
206     # with botnets (multiple Eggdrops connected together to maximize efficiency).
207     # You should read doc/BOTNET before modifying these settings.
208    
209     # If you want to use a different nickname on the botnet than you use on
210     # IRC (i.e. if you're on an un-trusted botnet), un-comment the next line
211     # and set it to the nick you would like to use.
212     #set botnet-nick "LlamaBot"
213    
214     # This opens a telnet port by which you and other bots can
215     # interact with the Eggdrop by telneting in.
216     #
217     # There are more options for the listen command in doc/tcl-commands.doc.
218     # Note, if you are running more than one bot on the same machine, you will
219     # want to space the telnet ports at LEAST 5 apart. 10 is even better.
220     #
221     # Valid ports are typically anything between 1025 and 65535 assuming the
222     # port is not already in use.
223     #
224    
225     # If you would like the bot to listen for users and bots in separate ports,
226     # use the following format.
227     #
228     # listen 3333 bots
229     # listen 4444 users
230     #
231     # If you wish to use only one port, use this format:
232     listen 3333 all
233    
234     # This setting defines whether or not people can boot users on the Eggdrop
235     # from other bots in your botnet. Valid settings are:
236     # 0 - allow *no* outside boots
237     # 1 - allow boots from sharebots
238     # 2 - allow any boots
239     set remote-boots 2
240    
241     # This setting prohibits remote bots from telling your Eggdrop to unlink from
242     # share bots.
243     set share-unlinks 1
244    
245     # This setting will drop telnet connections not matching a known host. It
246     # greatly improves protection from IRCops, but makes it impossible to add
247     # hosts on limbo (NOIRC) bots or have NEW as a valid login.
248     set protect-telnet 0
249    
250     # This setting will make the bot ignore DCC chat requests which appear to
251     # have bogus information on the grounds that the user may have been trying
252     # to make the bot connect to somewhere that will get it into trouble, or
253     # that the user has a broken client (like mIRC tends to do), in which case
254     # the connect wouldn't work anyway. It's suggested that you turn this on.
255     set dcc-sanitycheck 0
256    
257     # This settings defines a time in seconds that the bot should wait before
258     # a dcc chat, telnet, or relay connection times out.
259     set ident-timeout 5
260    
261     # Define here whether or not a +o user still needs the +p flag to dcc the bot.
262     set require-p 0
263    
264     # If you want people allow to telnet in and type 'NEW' to become a new user,
265     # set this to 1. This is similar to the 'hello' msg command. The protect-telnet
266     # setting must be set to 0 to use this.
267     set open-telnets 0
268    
269     # If you don't want Eggdrop to identify itself as an eggdrop on a telnet connection,
270     # set this setting to 1. Eggdrop will display 'Nickname' instead.
271     set stealth-telnets 0
272    
273     # If you want Eggdrop to display a banner when telneting in, set this setting
274     # to 1. The telnet banner is set by 'set telnet-banner'.
275     set use-telnet-banner 0
276    
277     # This settings defines a time in seconds that the bot should wait before
278     # a dcc chat, telnet, or relay connection times out.
279     set connect-timeout 15
280    
281     # Specify here the number of lines to accept from a user on the partyline
282     # within 10 seconds before they are considered to be flooding and therefore
283     # get booted.
284     set dcc-flood-thr 3
285    
286     # Define here how many telnet connection attempts in how many seconds from
287     # the same host constitute a flood. The correct format is Attempts:Seconds.
288     set telnet-flood 5:60
289    
290     # If you want telnet-flood to apply even to +f users, set this setting to 1.
291     set paranoid-telnet-flood 1
292    
293     # Set here the amount of seconds before giving up on hostname/address
294     # lookup (you might want to increase this if you are on a slow network).
295     set resolve-timeout 15
296    
297    
298     ##### MORE ADVANCED SETTINGS #####
299    
300     # Set this to your socks host if your Eggdrop sits behind a firewall.
301     # If you use a Sun "telnet passthru" firewall, use this setting:
302     #set firewall "!sun-barr.ebay:3666"
303    
304     # If you have a NAT firewall (you box has an IP in one of the following
305     # ranges: 192.168.0.0-192.168.255.255, 172.16.0.0-172.31.255.255,
306     # 10.0.0.0-10.255.255.255 and your firewall transparently changes your
307     # address to a unique address for your box) or you have IP masquerading
308     # between you and the rest of the world, and /dcc chat,/ctcp chat or
309     # userfile sharing aren't working, enter your outside IP here. Do not
310     # enter anything for my-ip or my-hostname if you use this setting.
311     #set nat-ip "127.0.0.1"
312    
313     # If you want all dcc file transfers to use a particular portrange either
314     # because you're behind a firewall, or for other security reasons, set it
315     # here.
316     #set reserved-portrange 2010:2020
317    
318     # Set the time in minutes that temporary ignores should last.
319     set ignore-time 15
320    
321     # Define here what Eggdrop considers 'hourly'. All calls to it, including such
322     # things as note notifying or userfile saving, are affected by this. For example:
323     #
324     # set hourly-updates 15
325     #
326     # The bot will save its userfile 15 minutes past every hour.
327     set hourly-updates 00
328    
329     # Un-comment the next line and set the list of owners of the bot.
330     # You NEED to change this setting.
331     #set owner "MrLame, MrsLame"
332    
333     # Who should a note be sent to when new users are learned?
334     set notify-newusers "$owner"
335    
336     # Enter the flags that all new users should get by default. See '.help whois'
337     # on the partyline for a list of flags and their descriptions.
338     set default-flags "hp"
339    
340     # Enter all user-defined fields that should be displayed in a '.whois'.
341     # This will only be shown if the user has one of these extra fields.
342     # You might prefer to comment this out and use the userinfo1.0.tcl script
343     # which provides commands for changing all of these.
344     set whois-fields "url birthday"
345    
346     # Enable this setting if you want your Eggdrop to die upon receiving a SIGHUP
347     # kill signal. Otherwise, the Eggdrop will just save its userfile and rehash.
348     set die-on-sighup 0
349    
350     # Enable this setting if you want your Eggdrop to die upon receiving a SIGTERM
351     # kill signal. Otherwise, the Eggdrop will just save its userfile and rehash.
352     set die-on-sigterm 1
353    
354     # Comment these two lines if you wish to enable the .tcl and .set commands.
355     # If you select your owners wisely, you should be okay enabling these.
356     unbind dcc n tcl *dcc:tcl
357     unbind dcc n set *dcc:set
358    
359     # If you enable this setting, only permanent owners (owner setting) will be
360     # able to use .tcl and .set. Moreover, if you want only let permanent owners
361     # use .dump, then set this to 2.
362     set must-be-owner 1
363    
364     # Comment out this line to add the 'simul' partyline command (owners
365     # can manipulate other people on the party line). Please select owners
366     # wisely and use this command ethically!
367     unbind dcc n simul *dcc:simul
368    
369     # Set here the maximum number of dcc connections you will allow. You can
370     # increase this later, but never decrease it.
371     set max-dcc 50
372    
373     # Enable this setting if you want to enable the 'dccsimul' Tcl command.
374     set enable-simul 1
375    
376     # Enable this setting if you want +d & +k users to use commands bound as -|-.
377     set allow-dk-cmds 1
378    
379     # If your Eggdrop rejects bots that actually have already disconnected from
380     # another hub, but the disconnect information has not yet spread over the
381     # botnet due to lag, use this setting. The bot will wait dupwait-timeout
382     # seconds before it checks again and then finally reject the bot.
383     set dupwait-timeout 5
384    
385     # You MUST remove this line for your bot to start. This has been added to
386     # prevent you from starting up a bot that is not fully configured. Bots
387     # that have not been fully configured may join the wrong IRC network, the
388     # wrong channels, or generally do things that you do not want. Please make
389     # sure that you have double-checked every setting. There's also a similar line
390     # lower down, just to make sure you're reading :)
391     die "Please make sure you edit your config file completely."
392    
393    
394     ##### MODULES #####
395    
396     # Below are various settings for the modules included with Eggdrop.
397     # PLEASE READ AND EDIT THEM CAREFULLY, even if you're an old hand at
398     # Eggdrop, things change.
399    
400     # This path specifies the path were Eggdrop should look for its modules.
401     # If you run the bot from the compilation directory, you will want to set
402     # this to "". If you use 'make install' (like all good kiddies do ;), this
403     # is a fine default. Otherwise, use your head :)
404     set mod-path "modules/"
405    
406    
407     #### DNS MODULE ####
408    
409     # This module provides asynchronous dns support. This will avoid long
410     # periods where the bot just hangs there, waiting for a hostname to
411     # resolve, which will often let it timeout on all other connections.
412     loadmodule dns
413    
414     #### CHANNELS MODULE ####
415    
416     # This module provides channel related support for the bot. Without it,
417     # you won't be able to make the bot join a channel or save channel
418     # specific userfile information.
419     loadmodule channels
420    
421     # Enter here the filename where dynamic channel settings are stored.
422     set chanfile "LamestBot.chan"
423    
424     # Set this setting to 1 if you want your bot to expire bans/exempts/invites set
425     # by other opped bots on the channel.
426     set force-expire 0
427    
428     # Set this setting to 1 if you want your bot to share user greets with other
429     # bots on the channel if sharing user data.
430     set share-greet 0
431    
432     # Set this setting to 1 if you want to allow users to store an info line.
433     set use-info 1
434    
435     # The following settings are used as default values when you .+chan #chan or .tcl
436     # channel add #chan. Look in the section below for explanation of every option.
437    
438     set global-flood-chan 10:60
439     set global-flood-deop 3:10
440     set global-flood-kick 3:10
441     set global-flood-join 5:60
442     set global-flood-ctcp 3:60
443     set global-flood-nick 5:60
444     set global-aop-delay 5:30
445     set global-idle-kick 0
446     set global-chanmode "nt"
447     set global-stopnethack-mode 0
448 wcc 1.8 set global-revenge-mode 0
449 wcc 1.1 set global-ban-time 120
450     set global-exempt-time 60
451     set global-invite-time 60
452    
453     set global-chanset {
454     -autoop -autovoice
455     -bitch +cycle
456     +dontkickops +dynamicbans
457     +dynamicexempts +dynamicinvites
458     -enforcebans +greet
459     -inactive -nodesynch
460     -protectfriends +protectops
461     -revenge -revengebot
462     -secret -seen
463     +shared +statuslog
464     +userbans +userexempts
465     +userinvites -protecthalfops
466     -autohalfop
467     }
468    
469     # Add each static channel you want your bot to sit in using the following
470     # command. There are many different possible settings you can insert into
471     # this command, which are explained below.
472     #
473     # channel add #lamest {
474     # chanmode "+nt-likm"
475     # idle-kick 0
476     # stopnethack-mode 0
477 wcc 1.8 # revenge-mode 0
478 wcc 1.1 # ban-time 120
479     # exempt-time 60
480     # invite-time 60
481     # aop-delay 5:30
482     # need-op { putserv "PRIVMSG #lamest :op me cos i'm lame!" }
483     # need-invite { putserv "PRIVMSG #lamest :let me in!" }
484     # need-key { putserv "PRIVMSG #lamest :let me in!" }
485     # need-unban { putserv "PRIVMSG #lamest :let me in!" }
486     # need-limit { putserv "PRIVMSG #lamest :let me in!" }
487     # flood-chan 10:60
488     # flood-deop 3:10
489     # flood-kick 3:10
490     # flood-join 5:60
491     # flood-ctcp 3:60
492     # flood-nick 5:60
493     # }
494     #
495     # chanmode +/-<modes>
496     # This setting makes the bot enforce channel modes. It will always add
497     # the +<modes> and remove the -<modes> modes.
498     # idle-kick 0
499     # This setting will make the bot check every minute for idle
500     # users. Set this to 0 to disable idle check.
501     #
502     # stopnethack-mode 0
503     # This setting will make the bot de-op anyone who enters the channel
504     # with serverops. There're seven different modes for this settings:
505     # 0 turn off,
506     # 1 isoptest (allow serverop if registered op)
507     # 2 wasoptest (allow serverop if op before split)
508     # 3 allow serverop if isop or wasop
509     # 4 allow serverop if isop and wasop.
510     # 5 If the channel is -bitch, see stopnethack-mode 3
511     # If the channel is +bitch, see stopnethack-mode 1
512     # 6 If the channel is -bitch, see stopnethack-mode 2
513     # If the channel is +bitch, see stopnethack-mode 4
514     #
515 wcc 1.8 # revenge-mode 0
516 wcc 1.1 # This settings defines how the bot should punish bad users when
517     # revenging. There are four possible settings:
518     # 0 Deop the user.
519     # 1 Deop the user and give them the +d flag for the channel.
520     # 2 Deop the user, give them the +d flag for the channel, and kick them.
521     # 3 Deop the user, give them the +d flag for the channel, kick, and ban them.
522     #
523     # ban-time 120
524     # Set here how long temporary bans will last (in minutes). If you
525     # set this setting to 0, the bot will never remove them.
526     #
527     # exempt-time 60
528     # Set here how long temporary exempts will last (in minutes). If you
529     # set this setting to 0, the bot will never remove them. The bot will
530     # check the exempts every X minutes, but will not remove the exempt if
531     # a ban is set on the channel that matches that exempt. Once the ban is
532     # removed, then the exempt will be removed the next time the bot checks.
533     # Please note that this is an IRCnet feature.
534     #
535     # invite-time 60
536     # Set here how long temporary invites will last (in minutes). If you
537     # set this setting to 0, the bot will never remove them. The bot will
538     # check the invites every X minutes, but will not remove the invite if
539     # a channel is set to +i. Once the channel is -i then the invite will be
540     # removed the next time the bot checks. Please note that this is an IRCnet
541     # feature.
542     #
543     # aop-delay (minimum:maximum)
544     # This is used for autoop, autohalfop, autovoice. If an op or voice joins a
545     # channel while another op or voice is pending, the bot will attempt to put
546     # both modes on one line.
547     # aop-delay 0 No delay is used.
548     # aop-delay X An X second delay is used.
549     # aop-delay X:Y A random delay between X and Y is used.
550     #
551     # need-op { putserv "PRIVMSG #lamest :op me cos i'm lame!" }
552     # This setting will make the bot run the script enclosed in brackets
553     # if it does not have ops. This must be shorter than 120 characters.
554     # If you use scripts like getops.tcl or botnetop.tcl, you don't need
555     # to set this setting.
556     #
557     # need-invite { putserv "PRIVMSG #lamest :let me in!" }
558     # This setting will make the bot run the script enclosed in brackets
559     # if it needs an invite to the channel. This must be shorter than 120
560     # characters. If you use scripts like getops.tcl or botnetop.tcl, you
561     # don't need to set this setting.
562     #
563     # need-key { putserv "PRIVMSG #lamest :let me in!" }
564     # This setting will make the bot run the script enclosed in brackets
565     # if it needs the key to the channel. This must be shorter than 120
566     # characters. If you use scripts like getops.tcl or botnetop.tcl, you
567     # don't need to set this setting
568     #
569     # need-unban { putserv "PRIVMSG #lamest :let me in!" }
570     # This setting will make the bot run the script enclosed in brackets
571     # if it needs to be unbanned on the channel. This must be shorter than
572     # 120 characters. If you use scripts like getops.tcl or botnetop.tcl,
573     # you don't need to set this setting
574     #
575     # need-limit { putserv "PRIVMSG #lamest :let me in!" }
576     # This setting will make the bot run the script enclosed in brackets
577     # if it needs the limit to be raised on the channel. This must be
578     # shorter than 120 characters. If you use scripts like getops.tcl or
579     # botnetop.tcl, you don't need to set this setting
580     #
581     # flood-chan 10:60
582     # Set here how many channel messages in how many seconds from one
583     # host constitutes a flood. Setting this to 0 or 0:0 disables
584     # flood protection for the channel.
585     #
586     # flood-deop 3:10
587     # Set here how many deops in how many seconds from one host constitutes
588     # a flood. Setting this to 0 or 0:0 disables deop flood protection for
589     # the channel.
590     #
591     # flood-kick 3:10
592     # Set here how many kicks in how many seconds from one host constitutes
593     # a flood. Setting this to 0 or 0:0 disables kick flood protection for
594     # the channel.
595     #
596     # flood-join 5:60
597     # Set here how many joins in how many seconds from one host constitutes
598     # a flood. Setting this to 0 or 0:0 disables join flood protection for
599     # the channel.
600     #
601     # flood-ctcp 3:60
602     # Set here how many channel ctcps in how many seconds from one host
603     # constitutes a flood. Setting this to 0 or 0:0 disables ctcp flood
604     # protection for the channel.
605     #
606     # flood-nick 5:60
607     # Set here how many nick changes in how many seconds from one host
608     # constitutes a flood. Setting this to 0 or 0:0 disables nick flood
609     # protection for the channel.
610     #
611     # There are many different options for channels which you can
612     # define. They can be enabled or disabled using the channel set command by a
613     # plus or minus in front of them.
614     #
615     # channel set #lamest +enforcebans +dynamicbans +userbans +dynamicexempts
616     # channel set #lamest +userexempts +dynamicinvites +userinvites +protectops
617     # channel set #lamest +protectfriends +statuslog +revenge -protecthalfops
618     # channel set #lamest +revengebot +dontkickops +autovoice -autoop -autohalfop
619     # channel set #lamest -bitch -secret -shared +greet +cycle
620     #
621     # A complete list of all available channel settings:
622     #
623     # enforcebans
624     # When a ban is set, kick people who are on the channel and match
625     # the ban?
626     #
627     # dynamicbans
628     # Only activate bans on the channel when necessary? This keeps
629     # the channel's ban list from getting excessively long. The bot
630     # still remembers every ban, but it only activates a ban on the
631     # channel when it sees someone join who matches that ban.
632     #
633     # userbans
634     # Allow bans to be made by users directly? If turned off, the bot
635     # will require all bans to be made through the bot's console.
636     #
637     # dynamicexempts
638     # Only activate exempts on the channel when necessary? This keeps
639     # the channel's exempt list from getting excessively long. The bot
640     # still remembers every exempt, but it only activates a exempt on
641     # the channel when it sees a ban set that matches the exempt. The
642     # exempt remains active on the channel for as long as the ban is
643     # still active.
644     #
645     # userexempts
646     # Allow exempts to be made by users directly? If turned off, the
647     # bot will require all exempts to be made through the bot's console.
648     #
649     # dynamicinvites
650     # Only activate invites on the channel when necessary? This keeps
651     # the channel's invite list from getting excessively long. The bot
652     # still remembers every invite, but the invites are only activated
653     # when the channel is set to invite only and a user joins after
654     # requesting an invite. Once set, the invite remains until the
655     # channel goes to -i.
656     #
657     # userinvites
658     # Allow invites to be made by users directly? If turned off, the
659     # bot will require all invites to be made through the bot's console.
660     #
661     # autoop
662     # Op users with the +o flag as soon as they join the channel?
663     # This is insecure and not recommended.
664     #
665 wcc 1.7 # autohalfop
666 wcc 1.1 # Halfop users with the +l flag as soon as they join the channel?
667     # This is insecure and not recommended.
668     #
669     # bitch
670     # Only let users with +o) flag be opped on the channel?
671     #
672     # greet
673     # Say a user's info line when they join the channel?
674     #
675     # protectops
676     # Re-op a user with the +o flag if they get deopped?
677     #
678     # protecthalfops
679     # Re-halfop a user with the +l flag if they get dehalfopped?
680     #
681     # protectfriends
682     # Re-op a user with the +f flag if they get deopped?
683     #
684     # statuslog
685     # Log the channel status line every 5 minutes? This shows the bot's
686     # status on the channel (op, voice, etc.), The channel's modes, and
687     # the number of +m/+o/+v/+n/+b/+e/+I users on the channel. A sample
688     # status line follows:
689     #
690     # [01:40] @#lamest (+istn) : [m/1 o/1 v/4 n/7 b/1 e/5 I/7]
691     #
692     # revenge
693     # Remember people who deop/kick/ban the bot, valid ops, or friends
694     # and punish them? Users with the +f flag are exempt from revenge.
695     #
696     # revengebot
697     # This is similar to to the 'revenge' option, but it only triggers
698     # if a bot gets deopped, kicked or banned.
699     #
700     # autovoice
701     # Voice users with the +v flag when they join the channel?
702     #
703     # secret
704     # Prevent this channel from being listed on the botnet?
705     #
706     # shared
707     # Share channel-related user info for this channel?
708     #
709     # cycle
710     # Cycle the channel when it has no ops?
711     #
712     # dontkickops
713     # Do you want the bot not to be able to kick users who have the +o
714     # flag, letting them kick-flood for instance to protect the channel
715     # against clone attacks.
716     #
717     # inactive
718     # This prevents the bot from joining the channel (or makes it leave
719     # the channel if it is already there). It can be useful to make the
720     # bot leave a channel without losing its settings, channel-specific
721     # user flags, channel bans, and without affecting sharing.
722     #
723     # seen
724     # Respond to seen requests in the channel? The seen module must be
725     # loaded for this to work.
726     #
727     # nodesynch
728     # Allow non-ops to perform channel modes? This can stop the bot from
729     # fighting with services such as ChanServ, or from kicking IRCops when
730     # setting channel modes without having ops.
731     #
732     # Here is a shorter example:
733     #
734     # channel add #botcentral {
735     # chanmode "+mntisl 1"
736     # idle-kick 1
737     # }
738     # channel set #botcentral +bitch +enforcebans -greet +revenge
739    
740    
741     #### SERVER MODULE ####
742    
743     # This module provides the core server support. You have to load this
744     # if you want your bot to come on IRC. Not loading this is equivalent
745     # to the old NO_IRC define.
746     loadmodule server
747    
748     # What is your network?
749     # 0 = EFnet (non +e/+I hybrid)
750     # 1 = IRCnet
751     # 2 = Undernet
752     # 3 = DALnet
753     # 4 = EFnet +e/+I hybrid
754     # 5 = Others
755     set net-type 0
756    
757     # Set the nick the bot uses on IRC, and on the botnet
758     # unless you specify a separate botnet-nick, here.
759    
760     set nick "Lamestbot"
761    
762     # Set the alternative nick which the bot uses on IRC if the nick specified
763     # by 'set nick' is unavailable. All '?' characters will be replaced by random
764     # numbers.
765    
766     set altnick "Llamab?t"
767    
768     # Set what should be displayed in the real-name field for the bot on IRC.
769     set realname "/msg LamestBot hello"
770    
771     # Set here a script to run (if any) when first connecting to a server.
772     # This is limited to 120 characters.
773     set init-server { putserv "MODE $botnick +i-ws" }
774    
775     # Set the default port which should be used if none is specified with
776     # '.jump' or in 'set servers'.
777     set default-port 6667
778    
779     # This is the bot's server list. The bot will start at the first server listed,
780     # and cycle through them whenever it gets disconnected. You need to change these
781     # servers to YOUR network's servers.
782     #
783     # The format is:
784     # server[:port[:password]]
785     #
786     # Both the port and password fields are optional; however, if you want to set a
787     # password you must also set a port. If a port isn't specified it will default to
788     # your default-port setting.
789     set servers {
790     you.need.to.change.this:6667
791     another.example.com:7000
792     }
793    
794     # This setting makes the bot try to get his original nickname back if its
795     # primary nickname is already in use.
796     set keep-nick 1
797    
798     # Set this to 1 if you don't want your the bot to strip a leading '~'
799     # on user@hosts.
800     set strict-host 0
801    
802     # This setting makes the bot squelch the error message when rejecting a DCC
803     # CHAT or SEND. Normally it tells the DCC user that the CHAT or SEND has
804     # been rejected because they don't have access.
805     # Please note, sometimes IRC server operators detect bots that way.
806     set quiet-reject 1
807    
808     # If you want your bot to answer lower case ctcp requests (non rfc-
809     # compliant), set this setting to 1. mIRC will do this, most other
810     # clients will not.
811     set lowercase-ctcp 0
812    
813     # Set how many ctcps should be answered at once.
814     set answer-ctcp 3
815    
816     # Set here how many msgs in how many seconds from one host constitutes
817     # a flood. If you set this to 0:0, msg flood protection will be disabled.
818     set flood-msg 5:60
819    
820     # Set here how many ctcps in how many seconds from one host constitutes
821     # a flood. If you set this to 0:0, ctcp flood protection will be disabled.
822     set flood-ctcp 3:60
823    
824     # This settings makes the bot cycle forever through the server list until
825     # it successfully connects to one.
826     set never-give-up 1
827    
828     # This setting defines how long Eggdrop should wait before moving from one
829     # server to another on disconnect. If you set 0 here, Eggdrop will not wait
830     # at all and will connect instantly. Setting this too low could result in
831     # your bot being K:Lined.
832     set server-cycle-wait 60
833    
834     # Set here how long Eggdrop should wait for a response when connecting to a
835     # server before giving up and moving on to next server.
836     set server-timeout 60
837    
838     # If the number of servers on the net gets below this number, the bot
839     # will jump to a new server (it will assume it's on the losing end of
840     # a netsplit). Set this to 0 to turn off. If your bot is running on
841     # any major IRC network, this should probably be turned off.
842     set servlimit 0
843    
844     # Set this to 1 if Eggdrop should check for stoned servers? (where the
845     # server connection has died, but Eggdrop hasn't been notified yet).
846     set check-stoned 1
847    
848     # This setting allows you the logging of all information received from the
849     # server via console mode 'r'.
850     # NOTE: This is a large security hole, allowing people to see user passwords.
851     # This is now restricted to +n users only. Please choose your owners with
852     # care.
853     set use-console-r 0
854    
855     # This setting allows you the logging of all information sent to the server
856     # via console/log mode 'v'. It also allows logging of botnet traffic via
857     # console/log mode 't'.
858     # NOTE: This is a large security hole, allowing people to see passwords.
859     # This is now restricted to +n users only. Please choose your owners with
860     # care.
861     set debug-output 0
862    
863     # If you want your bot to exit the server if it receives an ERROR message,
864     # set this to 1.
865     set serverror-quit 1
866    
867     # Set here the maximum number of lines to queue to the server. If you're
868     # going to dump large chunks of text to people over IRC, you will probably
869     # want to raise this. 300 is fine for most people though.
870     set max-queue-msg 300
871    
872     # If you want Eggdrop to trigger binds for ignored users, set this to 1.
873     set trigger-on-ignore 0
874    
875     # Allow identical messages in the mode queue?
876     set double-mode 0
877    
878     # Allow identical messages in the server queue?
879     set double-server 0
880    
881     # Allow identical messages in the help queue?
882     set double-help 0
883    
884     # This optimizes the kick queue. It also traces nick changes and parts in
885     # the channel and changes the kick queue accordingly. There are three
886     # different options for this setting:
887     # 0 = Turn it off.
888     # 1 = Optimize the kick queue by summarizing kicks.
889     # 2 = Trace nick changes and parts on the channel and change the queue
890     # accordingly. For example, bot will not try to kick users who have
891     # already parted the channel.
892     # ATTENTION: Setting 2 is very CPU intensive.
893     set optimize-kicks 1
894 wcc 1.4
895     # If your network supports more recipients per command then 1, you can
896     # change this behavior here. Set this to the number of recipients per
897     # command, or set this to 0 for unlimited.
898     set stack-limit 4
899 wcc 1.1
900     ### SERVER MODULE - OTHER NETWORKS (net-type 5) ###
901    
902     # This settings defines how umode +r is understood by Eggdrop. Some
903     # networks use +r to indicate a restricted connection. If this is your
904     # case, and you want your bot to leave restricted servers and jump to
905     # the next server on its list, then set it to 1.
906     #set check-mode-r 1
907    
908     # This setting allows you to specify the maximum nick-length supported by
909     # your network. The default setting is 9. The maximum supported length by
910     # Eggdrop is 32.
911     #set nick-len 9
912    
913     #### CTCP MODULE ####
914    
915     # This module provides the normal ctcp replies that you'd expect.
916     # Without it loaded, CTCP CHAT will not work. The server module
917     # is required for this module to function.
918     loadmodule ctcp
919    
920     # Set here how the ctcp module should answer ctcps. There are 3 possible
921     # operating modes:
922     # 0: Normal behavior is used.
923     # 1: The bot ignores all ctcps, except for CHAT and PING requests
924     # by users with the +o flag.
925     # 2: Normal behavior is used, however the bot will not answer more
926     # than X ctcps in Y seconds (defined by 'set flood-ctcp').
927     set ctcp-mode 0
928    
929     # There are also several variables to help make your bot less noticeable.
930     # They are: ctcp-version, ctcp-finger, and ctcp-userinfo. You can use set to set
931     # them to values you'd like.
932    
933    
934     #### IRC MODULE ####
935    
936     # This module provides basic IRC support for your bot. You have to
937     # load this if you want your bot to come on IRC. The server and channels
938     # modules must be loaded for this module to function.
939     loadmodule irc
940    
941     # Set this to 1 if you want to bounce all server bans.
942     set bounce-bans 1
943    
944     # Set this to 1 if you want to bounce all server modes.
945     set bounce-modes 0
946    
947     # Set here the maximum number of bans you want the bot to set on a channel.
948     # Eggdrop will not place any more bans if this limit is reached. Undernet
949 wcc 1.9 # currently allows 45 bans, IRCnet allows 30, EFnet allows 20, and DALnet
950     # allows 100.
951 wcc 1.1 set max-bans 20
952    
953 wcc 1.9 # There is a global limit for +b/+e/+I modes. This limit should be set to
954     # the same value as max-bans for networks that do not support +e/+I.
955 wcc 1.1 set max-modes 30
956    
957     # Set this to 1 if you want the bot to kick for control character/ctcp
958     # avalanches to a channel. Remember that if it does, it won't ban them.
959     # This can start kick floods.
960     set kick-fun 0
961    
962     # Set this to 1 if you want the bot to ban for control character/ctcp
963     # avalanches to a channel. This can prevent kick floods, but it also can
964     # fill the banlist.
965     set ban-fun 0
966    
967     # If you want people to be able to add themselves to the bot's userlist
968     # with the default userflags (defined above in the config file) via the
969     # 'hello' msg command, set this to 1.
970     set learn-users 0
971    
972     # Set here the time (in seconds) to wait for someone to return from
973     # a netsplit (i.e. wasop will expire afterwards). Set this to 1500
974     # on IRCnet since its nick delay stops after 30 minutes.
975     set wait-split 600
976    
977     # Set here the time (in seconds) that someone must have been off-channel
978     # before re-displaying their info line.
979     set wait-info 180
980    
981     # Set this to the maximum number of bytes to send in the arguments
982     # of modes sent to the server. Most servers default this to 200.
983     set mode-buf-length 200
984    
985     # Many IRCops find bots by seeing if they reply to 'hello' in a msg.
986     # You can change this to another word by un-commenting the following
987     # two lines and changing "myword" to the word wish to use instead of
988     # 'hello'. It must be a single word.
989     #unbind msg - hello *msg:hello
990     #bind msg - myword *msg:hello
991    
992     # Many takeover attempts occur due to lame users blindly /msg ident'ing to
993     # the bot and attempting to guess passwords. We now unbind this command by
994 wcc 1.8 # default to discourage them. You can enable these commands by commenting the
995     # following two lines.
996 wcc 1.1 unbind msg - ident *msg:ident
997     unbind msg - addhost *msg:addhost
998    
999     # If you are so lame you want the bot to display peoples info lines, even
1000     # when you are too lazy to add their chanrecs to a channel, set this to 1.
1001     # *NOTE* This means *every* user with an info line will have their info
1002     # line displayed on EVERY channel they join (provided they have been gone
1003     # longer than wait-info).
1004     set no-chanrec-info 0
1005    
1006     ### IRC MODULE - IRCnet SPECIFIC FEATURES (net-type 1) ###
1007    
1008     # Attention: Use these settings *only* if you set 'net-type' to 1!
1009    
1010     # Set this to 1 if you want to bounce all server exemptions (+e modes).
1011     set bounce-exempts 0
1012    
1013     # Set this to 1 if you want to bounce all server invitations (+I modes).
1014     set bounce-invites 0
1015    
1016     # Set here the maximum number of exempts you want Eggdrop to set
1017     # on a channel. Eggdrop will not place any more exempts if this
1018     # limit is reached.
1019     set max-exempts 20
1020    
1021     # Set here the maximum number of invites you want Eggdrop to set
1022     # on a channel. Eggdrop will not place any more invites if this
1023     # limit is reached.
1024     set max-invites 20
1025    
1026     # The following settings should be left commented unless the default values
1027     # are being overridden. By default, exempts and invites are on for IRCnet,
1028     # but off for all other large networks. This behavior can be modified with
1029     # the following 2 flags. If your network doesn't support +e/+I modes then you
1030     # will be unable to use these features.
1031     #
1032     # Do you want to enable exempts?
1033     #set use-exempts 0
1034    
1035     # Do you want to use invites?
1036     #set use-invites 0
1037    
1038     # At the moment, the current IRCnet IRCd version (2.10) doesn't support the mixing
1039     # of b,o and v modes with e and I modes. This might be changed in the future, so
1040     # use 1 at the moment for this setting.
1041     set prevent-mixing 1
1042    
1043     ### IRC MODULE - OTHER NETWORKS (net-type 5) ###
1044    
1045     # Attention: Use these settings *only* if you set 'net-type' to 5!
1046    
1047     # If your network supports more users per kick command then 1, you can
1048     # change this behavior here. Set this to the number of users to kick at
1049     # once, or set this to 0 for all at once.
1050     #set kick-method 1
1051    
1052     # Some networks allow you to stack lots of channel modes into one line.
1053     # They're all guaranteed to support at least 3, so that's the default.
1054     # If you know your network supports more, you may want to adjust this.
1055 wcc 1.2 # This setting is limited to 6, although if you want to use a higher value,
1056     # you can modify this by changing the value of MODES_PER_LINE_MAX in
1057     # src/chan.h and recompiling the bot.
1058 wcc 1.1 #set modes-per-line 3
1059    
1060     # Some networks don't include the +l limit and +k or -k key modes
1061     # in the modes-per-line (see above) limitation. Set include-lk to 0 for
1062     # these networks.
1063     #set include-lk 1
1064    
1065     # Set this to 1 if your network uses IRCu2.10.01 specific /who requests.
1066     # Eggdrop can, therefore, ask only for exactly what's needed.
1067     #set use-354 0
1068    
1069     # If your network doesn't use rfc 1459 compliant string matching routines,
1070     # set this to 0.
1071     #set rfc-compliant 1
1072    
1073    
1074     #### TRANSFER MODULE ####
1075    
1076     # The transfer module provides dcc send/get support and userfile transfer
1077     # support for userfile sharing. Un-comment the next line to load it if you
1078     # need this functionality.
1079     #loadmodule transfer
1080    
1081     # Set here the maximum number of simultaneous downloads to allow for
1082     # each user.
1083     set max-dloads 3
1084    
1085     # Set here the block size for dcc transfers. ircII uses 512 bytes,
1086     # but admits that may be too small. 1024 is standard these days.
1087     # Set this to 0 to use turbo-dcc (recommended).
1088 wcc 1.8 set dcc-block 0
1089 wcc 1.1
1090     # Enable this setting if you want to copy files into the /tmp directory
1091     # before sending them. This is useful on most systems for file stability,
1092     # but if your directories are NFS mounted, it's a pain, and you'll want
1093     # to set this to 0. If you are low on disk space, you may also want to
1094     # set this to 0.
1095     set copy-to-tmp 1
1096    
1097     # Set here the time (in seconds) to wait before an inactive transfer
1098     # times out.
1099     set xfer-timeout 30
1100    
1101    
1102     #### SHARE MODULE ####
1103    
1104     # This module provides userfile sharing support between two directly
1105     # linked bots. The transfer and channels modules are required for this
1106     # module to correctly function. Un-comment the following line to load
1107     # the share module.
1108     #loadmodule share
1109    
1110     # Settings in this section must be un-commented before setting.
1111    
1112     # When two bots get disconnected, this setting allows them to create a
1113     # resync buffer which saves all changes done to the userfile during
1114     # the disconnect. When they reconnect, they will not have to transfer
1115     # the complete user file, but, instead, just send the resync buffer.
1116     #
1117     # NOTE: This has been known to cause loss of channel flags and other
1118     # problems. Using this setting is not recommended.
1119     #set allow-resync 0
1120    
1121     # This setting specifies how long to hold another bots resync data
1122     # before flushing it.
1123     #set resync-time 900
1124    
1125     # When sharing user lists, DON'T ACCEPT global flag changes from other bots?
1126     # NOTE: The bot will still send changes made on the bot, it just won't accept
1127     # any global flag changes from other bots.
1128     #set private-global 0
1129    
1130     # When sharing user lists, if private-global isn't set, which global flag
1131     # changes from other bots should be ignored?
1132     #set private-globals "mnot"
1133    
1134     # When sharing user lists, don't accept ANY userfile changes from other
1135     # bots? Paranoid people should use this feature on their hub bot. This
1136     # will force all userlist changes to be made via the hub.
1137     #set private-user 0
1138    
1139     # This setting makes the bot discard its own bot records in favor of
1140     # the ones sent by the hub.
1141     # NOTE: No passwords or botflags are shared, only ports and
1142     # address are added to sharing procedure. This only works with hubs that
1143     # are v1.5.1 or higher.
1144     #set override-bots 0
1145    
1146    
1147     #### COMPRESS MODULE ####
1148    
1149     # This module provides provides support for file compression. This allows the
1150     # bot to transfer compressed user files and therefore save a significant amount
1151     # of bandwidth. The share module must be loaded to load this module. Un-comment
1152     # the following line to the compress module.
1153     #loadmodule compress
1154    
1155     # Allow compressed sending of user files? The user files are
1156     # compressed with the compression level defined in `compress-level'.
1157     set share-compressed 1
1158    
1159     # This is the default compression level used.
1160     #set compress-level 9
1161    
1162    
1163     #### FILESYSTEM MODULE ####
1164    
1165     # This module provides an area within the bot where users can store
1166     # files. With this module, the bot is usable as a file server. The
1167     # transfer module is required for this module to function. Un-comment
1168     # the following line to load the filesys module.
1169     #loadmodule filesys
1170    
1171     # Set here the 'root' directory for the file system.
1172     set files-path "/home/mydir/filesys"
1173    
1174     # If you want to allow uploads, set this to the directory uploads
1175     # should be put into. Set this to "" if you don't want people to
1176     # upload files to your bot.
1177     set incoming-path "/home/mydir/filesys/incoming"
1178    
1179     # If you don't want to have a central incoming directory, but instead
1180     # want uploads to go to the current directory that a user is in, set
1181     # this setting to 1.
1182     set upload-to-pwd 0
1183    
1184     # Eggdrop creates a '.filedb' file in each subdirectory of your file area
1185     # to keep track of its own file system information. If you can't do that (for
1186     # example, if the dcc path isn't owned by you, or you just don't want it to do
1187     # that) specify a path here where you'd like all of the database files to be
1188     # stored instead.
1189     set filedb-path ""
1190    
1191     # Set here the maximum number of people that can be in the file area at once.
1192     # Setting this to 0 makes it effectively infinite.
1193     set max-file-users 20
1194    
1195     # Set here the maximum allowable file size that will be received (in kb).
1196     # Setting this to 0 makes it effectively infinite.
1197     set max-filesize 1024
1198    
1199    
1200     #### NOTES MODULE ####
1201    
1202     # This module provides support for storing of notes for users from each
1203     # other. Note sending between currently online users is supported in the
1204     # core, this is only for storing the notes for later retrieval.
1205     loadmodule notes
1206    
1207     # Set here the filename where private notes between users are stored.
1208     set notefile "LamestBot.notes"
1209    
1210     # Set here the maximum number of notes to allow to be stored for
1211     # each user (to prevent flooding).
1212     set max-notes 50
1213    
1214     # Set here how long (in days) to store notes before expiring them.
1215     set note-life 60
1216    
1217     # Set this to 1 if you want to allow users to specify a forwarding
1218     # address for forwarding notes to another account on another bot.
1219     set allow-fwd 0
1220    
1221     # Set this to 1 if you want the bot to let people know hourly if they
1222     # have any notes.
1223     set notify-users 1
1224    
1225     # Set this to 1 if you want the bot to let people know on join if they
1226     # have any notes.
1227     set notify-onjoin 1
1228    
1229     # Comment out this next line. Otherwise, your bot won't start.
1230     die "You didn't edit your config file completely like you were told, did you?"
1231    
1232    
1233     #### CONSOLE MODULE ####
1234    
1235     # This module provides storage of console settings when you exit the
1236     # bot or type .store on the partyline.
1237     loadmodule console
1238    
1239     # Save users console settings automatically? Otherwise, they have
1240     # to use the .store command.
1241     set console-autosave 1
1242    
1243     # If a user doesn't have any console settings saved, which channel
1244     # do you want them automatically put on?
1245     set force-channel 0
1246    
1247     # Enable this setting if a user's global info line should be displayed
1248     # when they join a botnet channel.
1249     set info-party 0
1250    
1251    
1252     #### WOOBIE MODULE ####
1253    
1254     # This is for demonstrative purposes only. If you are looking for starting
1255     # point in writing modules, woobie is the right thing.
1256     #loadmodule woobie
1257    
1258    
1259     #### SEEN MODULE ####
1260    
1261     # This module provides very basic seen commands via msg, on channel or via dcc.
1262     # This module works only for users in the bot's userlist. If you are looking for
1263     # a better and more advanced seen module, try the gseen module by G'Quann. You
1264     # can find it at http://www.visions-of-fantasy.de/gseen.mod/.
1265     #loadmodule seen
1266    
1267    
1268     #### BLOWFISH MODULE ####
1269    
1270     # IF YOU DON'T READ THIS YOU MAY RENDER YOUR USERFILE USELESS LATER
1271     # Eggdrop encrypts its userfile, so users can have secure passwords.
1272     # Please note that when you change your encryption method later (i.e.
1273     # using other modules like a md5 module), you can't use your current
1274     # userfile anymore. Eggdrop will not start without an encryption module.
1275     #loadmodule blowfish
1276    
1277    
1278     #### ASSOC MODULE ####
1279    
1280     # This module provides assoc support, i.e. naming channels on the botnet.
1281     # You can load it by un-commenting the following line.
1282     #loadmodule assoc
1283    
1284    
1285     #### WIRE MODULE ####
1286    
1287     # This module provides all the standard .wire commands via dcc. It is an
1288     # encrypted partyline communication tool, compatible with wire.tcl. An
1289     # encryption module must be loaded to use this module. Un-comment the
1290     # following line to load the wire module.
1291     #loadmodule wire
1292    
1293     #### UPTIME MODULE ####
1294    
1295     # This module reports uptime statistics to http://uptime.eggheads.org.
1296     # Go look and see what your uptime is! It takes about 9 hours to show up,
1297     # so if your bot isn't listed, try again later. The server module must be
1298     # loaded for this module to function.
1299     #
1300     # Information sent to the server includes the bot's uptime, botnet-nick,
1301     # server, version, and IP address. This information is stored in a temporary
1302     # logfile for debugging purposes only. The only publicly available information
1303     # will be the bot's botnet-nick, version and uptime. If you do not wish for this
1304     # information to be sent, comment out the following line.
1305     loadmodule uptime
1306    
1307     ##### SCRIPTS #####
1308    
1309     # This is a good place to load scripts to use with your bot.
1310    
1311     # This line loads script.tcl from the scripts directory inside your Eggdrop's
1312     # directory. All scripts should be put there, although you can place them where
1313     # you like as long as you can supply a fully qualified path to them.
1314     #
1315     # source scripts/script.tcl
1316    
1317     source scripts/alltools.tcl
1318     source scripts/action.fix.tcl
1319    
1320     # Use this script for Tcl and Eggdrop downwards compatibility.
1321     # NOTE: This can also cause problems with some newer scripts.
1322     source scripts/compat.tcl
1323    
1324     # This script provides many useful informational functions, like setting
1325     # users' URLs, e-mail address, ICQ numbers, etc. You can modify it to add
1326     # extra entries.
1327     source scripts/userinfo.tcl
1328     loadhelp userinfo.help

webmaster@eggheads.org
ViewVC Help
Powered by ViewVC 1.1.23