/[cvs]/eggdrop1.6/eggdrop.conf
ViewVC logotype

Annotation of /eggdrop1.6/eggdrop.conf

Parent Directory Parent Directory | Revision Log Revision Log | View Revision Graph Revision Graph


Revision 1.1 - (hide annotations) (download)
Fri Sep 27 22:16:24 2002 UTC (16 years, 5 months ago) by wcc
Branch: MAIN
Removed both eggdrop.simple.conf and eggdrop.advanced.conf, as many people cannot find the proper settings in eggdrop.simple.conf and
therefore mis-configure their bots. The advanced config was removed due to the fact that the differences between
eggdrop.advanced.conf and eggdrop.complete.conf wrere minimal.

1 wcc 1.1 #! /path/to/executable/eggdrop
2     # ^- This should contain a fully qualified path to your Eggdrop executable.
3     #
4     # $Id: eggdrop.complete.conf,v 1.63 2002/08/02 23:50:37 wcc Exp $
5     #
6     # This is a sample Eggdrop configuration file which includes all possible
7     # settings that can be used to configure your bot.
8     #
9     # More detailed descriptions of all these settings can be found in
10     # doc/settings/.
11    
12    
13     ##### BASIC SETTINGS #####
14    
15     # This setting defines the username the bot uses on IRC. This setting has
16     # no effect if an ident daemon is running on your bot's machine.
17     set username "lamest"
18    
19     # This setting defines which contact person should be shown in .status,
20     # /msg help, and other places. You really should include this information.
21     set admin "Lamer <email: lamer@lamest.lame.org>"
22    
23     # This setting is used only for info to share with others on your botnet.
24     # Set this to the IRC network your bot is connected to.
25     set network "I.didn't.edit.my.config.file.net"
26    
27     # This setting defines the timezone is your bot in. It's used for internal
28     # routines as well as for logfile timestamping and scripting purposes.
29     # The timezone string specifies the name of the timezone and must be three
30     # or more alphabetic characters. For example, Central European Time(UTC+1)
31     # should be "CET".
32     set timezone "EST"
33    
34     # The offset setting specifies the time value to be added to the local
35     # time to get Coordinated Universal Time (UTC aka GMT). The offset is
36     # positive if the local timezone is west of the Prime Meridian and
37     # negative if it is east. The value (in hours) must be between -23 and
38     # 23. For example, if the timezone is UTC+1, the offset is -1.
39     set offset "5"
40    
41     # If you don't want to use the timezone setting for scripting purposes only,
42     # but instead everywhere possible, un-comment the following line.
43     #set env(TZ) "$timezone $offset"
44    
45     # If you're using virtual hosting (your machine has more than 1 IP), you
46     # may want to specify the particular IP to bind to. You can specify either
47     # by hostname or by IP. You may also want to set the hostname here if
48     # Eggdrop has trouble detecting it when it starts up.
49     #set my-hostname "virtual.host.com"
50     #set my-ip "99.99.0.0"
51    
52     # If you want to have your Eggdrop messages displayed in a language other
53     # than English, change this setting to match your preference. An alternative
54     # would be to set the environment variable EGG_LANG to that value.
55     #addlang "english"
56    
57    
58     ##### LOG FILES #####
59    
60     # Eggdrop is capable of logging various things, from channel chatter to
61     # commands people use on the bot and file transfers. Logfiles are normally
62     # kept for 24 hours. Afterwards, they will be renamed to "(logfile).yesterday".
63     # After 48 hours, they will be overwritten by the logfile of the next day.
64     #
65     # Events are logged by certain categories. This way, you can specify
66     # exactly what kind of events you want sent to various logfiles.
67     #
68     # The most common log file flags are:
69     # m private msgs/ctcps to the bot
70     # k kicks, bans, mode changes on the channel
71     # j joins, parts, netsplits on the channel
72     # p public chatter on the channel
73     # s server connects/disconnects/notices
74     # b information about bot linking and userfile sharing
75     # c commands people use (via msg or dcc)
76     # x file transfers and file-area commands
77     # r (if use-console-r enabled) EVERYTHING sent to the bot by the server
78     # o other: misc info, errors -- IMPORTANT STUFF
79     # w wallops: msgs between IRCops (be sure to set the bot +w in init-server)
80     #
81     # There are others, but you probably shouldn't log them, it'd be rather
82     # unethical. ;) There are also eight user-defined levels (1-8) which
83     # are used by Tcl scripts.
84     #
85     # Each logfile belongs to a certain channel. Events of type 'k', 'j', and 'p'
86     # are logged to whatever channel they happened on. Most other events are
87     # currently logged to every channel. You can make a logfile belong to all
88     # channels by assigning it to channel "*".
89    
90     # This is the maximum number of logfiles allowed. This setting can be
91     # increased; however, don't decrease it.
92     set max-logs 5
93    
94     # This is the maximum size of your logfiles. Set it to 0 to disable.
95     # This value is in kilobytes, so '550' would mean cycle logs when it
96     # reaches the size of 550 kilobytes. Note that this only works if you
97     # have keep-all-logs 0 (OFF).
98     set max-logsize 0
99    
100     # This could be good if you have had problem with the logfile filling
101     # your quota/hard disk or if you log +p and publish it to the web and
102     # need more up-to-date info. Note that this setting might increase the
103     # CPU usage of your bot (on the other hand it will decrease your mem usage).
104     set quick-logs 0
105    
106     # This creates a logfile named eggdrop.log containing private msgs/ctcps,
107     # commands, errors, and misc. info from any channel.
108     logfile mco * "logs/eggdrop.log"
109    
110     # This creates a logfile named lamest.log containing joins, parts,
111     # netsplits, kicks, bans, mode changes, and public chat on the
112     # channel #lamest.
113     logfile jpk #lamest "logs/lamest.log"
114    
115     # Use this feature to timestamp entries in the log file.
116     set log-time 1
117    
118     # If you want to keep your logfiles forever, turn this setting on. All
119     # logfiles will get suffix ".[day, 2 digits][month, 3 letters][year, 4 digits]".
120     # Note that your quota/hard-disk might be filled by this, so check your logfiles
121     # often and download them.
122     set keep-all-logs 0
123    
124     # If keep-all-logs is 1, this setting will define the suffix of the logfiles.
125     # The default will result in a suffix like "04May2000". "%Y%m%d" will produce
126     # the often used yyyymmdd format. Read the strftime manpages for more options.
127     # NOTE: On systems which don't support strftime, the default format will
128     # be used _always_.
129     set logfile-suffix ".%d%b%Y"
130    
131     # You can specifiy when Eggdrop should switch logfiles and start fresh. You
132     # must use military time for this setting. 300 is the default, and describes
133     # 03:00 (AM).
134     set switch-logfiles-at 300
135    
136     # "Writing user file..." and "Writing channel file..." messages won't be
137     # logged anymore if this option is enabled.
138     set quiet-save 0
139    
140    
141     ##### CONSOLE #####
142    
143     # This is the default console mode. It uses the same event flags as the log
144     # files do. The console channel is automatically set to your "primary" channel,
145     # which is set in the modules section of the config file. Masters can change
146     # their console channel and modes with the '.console' command.
147    
148     set console "mkcobxs"
149    
150    
151     ##### FILES AND DIRECTORIES #####
152    
153     # Specify here the filename your userfile should be saved as.
154     set userfile "LamestBot.user"
155    
156     # Specify here the filename Eggdrop will save its pid to. If no pidfile is
157     # specified, pid.(botnet-nick) will be used.
158     #set pidfile "pid.LamestBot"
159    
160     # If you want your userfile to be sorted upon saving, enable this setting.
161     # This causes the bot to use bit more CPU when saving the usefile.
162     set sort-users 0
163    
164     # Specify here where Eggdrop should look for help files. Don't modify this
165     # setting unless you know what you're doing!
166     set help-path "help/"
167    
168     # Specify here where Eggdrop should look for text files. This is used for
169     # certain Tcl and DCC commands.
170     set text-path "text/"
171    
172     # Set here a place to store temporary files.
173     set temp-path "/tmp"
174    
175     # The MOTD (Message Of The day) is displayed when people dcc chat or telnet
176     # to the bot. Look at doc/text-substitutions.doc for options.
177     set motd "text/motd"
178    
179     # This banner will be displayed on telnet connections. Look at
180     # doc/text-substitutions.doc for options.
181     set telnet-banner "text/banner"
182    
183     # This specifies what permissions the user, channel, and notes files should
184     # be set to. The octal values are the same as for the chmod system command.
185     #
186     # To remind you:
187     #
188     # u g o u g o u g o
189     # 0600 rw------- 0400 r-------- 0200 -w------- u - user
190     # 0660 rw-rw---- 0440 r--r----- 0220 -w--w---- g - group
191     # 0666 rw-rw-rw- 0444 r--r--r-- 0222 -w--w--w- o - others
192     #
193     # Note that the default 0600 is the most secure one and should only be changed
194     # if you need your files for shell scripting or other external applications.
195     set userfile-perm 0600
196    
197    
198     ##### BOTNET/DCC/TELNET #####
199    
200     # Settings in this section should be unimportant for you until you deal
201     # with botnets (multiple Eggdrops connected together to maximize efficiency).
202     # You should read doc/BOTNET before modifying these settings.
203    
204     # If you want to use a different nickname on the botnet than you use on
205     # IRC (i.e. if you're on an un-trusted botnet), un-comment the next line
206     # and set it to the nick you would like to use.
207     #set botnet-nick "LlamaBot"
208    
209     # This opens a telnet port by which you and other bots can
210     # interact with the Eggdrop by telneting in.
211     #
212     # There are more options for the listen command in doc/tcl-commands.doc.
213     # Note, if you are running more than one bot on the same machine, you will
214     # want to space the telnet ports at LEAST 5 apart. 10 is even better.
215     #
216     # Valid ports are typically anything between 1025 and 65535 assuming the
217     # port is not already in use.
218     #
219    
220     # If you would like the bot to listen for users and bots in separate ports,
221     # use the following format.
222     #
223     # listen 3333 bots
224     # listen 4444 users
225     #
226     # If you wish to use only one port, use this format:
227     listen 3333 all
228    
229     # This setting defines whether or not people can boot users on the Eggdrop
230     # from other bots in your botnet. Valid settings are:
231     # 0 - allow *no* outside boots
232     # 1 - allow boots from sharebots
233     # 2 - allow any boots
234     set remote-boots 2
235    
236     # This setting prohibits remote bots from telling your Eggdrop to unlink from
237     # share bots.
238     set share-unlinks 1
239    
240     # This setting will drop telnet connections not matching a known host. It
241     # greatly improves protection from IRCops, but makes it impossible to add
242     # hosts on limbo (NOIRC) bots or have NEW as a valid login.
243     set protect-telnet 0
244    
245     # This setting will make the bot ignore DCC chat requests which appear to
246     # have bogus information on the grounds that the user may have been trying
247     # to make the bot connect to somewhere that will get it into trouble, or
248     # that the user has a broken client (like mIRC tends to do), in which case
249     # the connect wouldn't work anyway. It's suggested that you turn this on.
250     set dcc-sanitycheck 0
251    
252     # This settings defines a time in seconds that the bot should wait before
253     # a dcc chat, telnet, or relay connection times out.
254     set ident-timeout 5
255    
256     # Define here whether or not a +o user still needs the +p flag to dcc the bot.
257     set require-p 0
258    
259     # If you want people allow to telnet in and type 'NEW' to become a new user,
260     # set this to 1. This is similar to the 'hello' msg command. The protect-telnet
261     # setting must be set to 0 to use this.
262     set open-telnets 0
263    
264     # If you don't want Eggdrop to identify itself as an eggdrop on a telnet connection,
265     # set this setting to 1. Eggdrop will display 'Nickname' instead.
266     set stealth-telnets 0
267    
268     # If you want Eggdrop to display a banner when telneting in, set this setting
269     # to 1. The telnet banner is set by 'set telnet-banner'.
270     set use-telnet-banner 0
271    
272     # This settings defines a time in seconds that the bot should wait before
273     # a dcc chat, telnet, or relay connection times out.
274     set connect-timeout 15
275    
276     # Specify here the number of lines to accept from a user on the partyline
277     # within 10 seconds before they are considered to be flooding and therefore
278     # get booted.
279     set dcc-flood-thr 3
280    
281     # Define here how many telnet connection attempts in how many seconds from
282     # the same host constitute a flood. The correct format is Attempts:Seconds.
283     set telnet-flood 5:60
284    
285     # If you want telnet-flood to apply even to +f users, set this setting to 1.
286     set paranoid-telnet-flood 1
287    
288     # Set here the amount of seconds before giving up on hostname/address
289     # lookup (you might want to increase this if you are on a slow network).
290     set resolve-timeout 15
291    
292    
293     ##### MORE ADVANCED SETTINGS #####
294    
295     # Set this to your socks host if your Eggdrop sits behind a firewall.
296     # If you use a Sun "telnet passthru" firewall, use this setting:
297     #set firewall "!sun-barr.ebay:3666"
298    
299     # If you have a NAT firewall (you box has an IP in one of the following
300     # ranges: 192.168.0.0-192.168.255.255, 172.16.0.0-172.31.255.255,
301     # 10.0.0.0-10.255.255.255 and your firewall transparently changes your
302     # address to a unique address for your box) or you have IP masquerading
303     # between you and the rest of the world, and /dcc chat,/ctcp chat or
304     # userfile sharing aren't working, enter your outside IP here. Do not
305     # enter anything for my-ip or my-hostname if you use this setting.
306     #set nat-ip "127.0.0.1"
307    
308     # If you want all dcc file transfers to use a particular portrange either
309     # because you're behind a firewall, or for other security reasons, set it
310     # here.
311     #set reserved-portrange 2010:2020
312    
313     # Set the time in minutes that temporary ignores should last.
314     set ignore-time 15
315    
316     # Define here what Eggdrop considers 'hourly'. All calls to it, including such
317     # things as note notifying or userfile saving, are affected by this. For example:
318     #
319     # set hourly-updates 15
320     #
321     # The bot will save its userfile 15 minutes past every hour.
322     set hourly-updates 00
323    
324     # Un-comment the next line and set the list of owners of the bot.
325     # You NEED to change this setting.
326     #set owner "MrLame, MrsLame"
327    
328     # Who should a note be sent to when new users are learned?
329     set notify-newusers "$owner"
330    
331     # Enter the flags that all new users should get by default. See '.help whois'
332     # on the partyline for a list of flags and their descriptions.
333     set default-flags "hp"
334    
335     # Enter all user-defined fields that should be displayed in a '.whois'.
336     # This will only be shown if the user has one of these extra fields.
337     # You might prefer to comment this out and use the userinfo1.0.tcl script
338     # which provides commands for changing all of these.
339     set whois-fields "url birthday"
340    
341     # Enable this setting if you want your Eggdrop to die upon receiving a SIGHUP
342     # kill signal. Otherwise, the Eggdrop will just save its userfile and rehash.
343     set die-on-sighup 0
344    
345     # Enable this setting if you want your Eggdrop to die upon receiving a SIGTERM
346     # kill signal. Otherwise, the Eggdrop will just save its userfile and rehash.
347     set die-on-sigterm 1
348    
349     # Comment these two lines if you wish to enable the .tcl and .set commands.
350     # If you select your owners wisely, you should be okay enabling these.
351     unbind dcc n tcl *dcc:tcl
352     unbind dcc n set *dcc:set
353    
354     # If you enable this setting, only permanent owners (owner setting) will be
355     # able to use .tcl and .set. Moreover, if you want only let permanent owners
356     # use .dump, then set this to 2.
357     set must-be-owner 1
358    
359     # Comment out this line to add the 'simul' partyline command (owners
360     # can manipulate other people on the party line). Please select owners
361     # wisely and use this command ethically!
362     unbind dcc n simul *dcc:simul
363    
364     # Set here the maximum number of dcc connections you will allow. You can
365     # increase this later, but never decrease it.
366     set max-dcc 50
367    
368     # Enable this setting if you want to enable the 'dccsimul' Tcl command.
369     set enable-simul 1
370    
371     # Enable this setting if you want +d & +k users to use commands bound as -|-.
372     set allow-dk-cmds 1
373    
374     # If your Eggdrop rejects bots that actually have already disconnected from
375     # another hub, but the disconnect information has not yet spread over the
376     # botnet due to lag, use this setting. The bot will wait dupwait-timeout
377     # seconds before it checks again and then finally reject the bot.
378     set dupwait-timeout 5
379    
380     # You MUST remove this line for your bot to start. This has been added to
381     # prevent you from starting up a bot that is not fully configured. Bots
382     # that have not been fully configured may join the wrong IRC network, the
383     # wrong channels, or generally do things that you do not want. Please make
384     # sure that you have double-checked every setting. There's also a similar line
385     # lower down, just to make sure you're reading :)
386     die "Please make sure you edit your config file completely."
387    
388    
389     ##### MODULES #####
390    
391     # Below are various settings for the modules included with Eggdrop.
392     # PLEASE READ AND EDIT THEM CAREFULLY, even if you're an old hand at
393     # Eggdrop, things change.
394    
395     # This path specifies the path were Eggdrop should look for its modules.
396     # If you run the bot from the compilation directory, you will want to set
397     # this to "". If you use 'make install' (like all good kiddies do ;), this
398     # is a fine default. Otherwise, use your head :)
399     set mod-path "modules/"
400    
401    
402     #### DNS MODULE ####
403    
404     # This module provides asynchronous dns support. This will avoid long
405     # periods where the bot just hangs there, waiting for a hostname to
406     # resolve, which will often let it timeout on all other connections.
407     loadmodule dns
408    
409     #### CHANNELS MODULE ####
410    
411     # This module provides channel related support for the bot. Without it,
412     # you won't be able to make the bot join a channel or save channel
413     # specific userfile information.
414     loadmodule channels
415    
416     # Enter here the filename where dynamic channel settings are stored.
417     set chanfile "LamestBot.chan"
418    
419     # Set this setting to 1 if you want your bot to expire bans/exempts/invites set
420     # by other opped bots on the channel.
421     set force-expire 0
422    
423     # Set this setting to 1 if you want your bot to share user greets with other
424     # bots on the channel if sharing user data.
425     set share-greet 0
426    
427     # Set this setting to 1 if you want to allow users to store an info line.
428     set use-info 1
429    
430     # The following settings are used as default values when you .+chan #chan or .tcl
431     # channel add #chan. Look in the section below for explanation of every option.
432    
433     set global-flood-chan 10:60
434     set global-flood-deop 3:10
435     set global-flood-kick 3:10
436     set global-flood-join 5:60
437     set global-flood-ctcp 3:60
438     set global-flood-nick 5:60
439     set global-aop-delay 5:30
440     set global-idle-kick 0
441     set global-chanmode "nt"
442     set global-stopnethack-mode 0
443     set global-revenge-mode 1
444     set global-ban-time 120
445     set global-exempt-time 60
446     set global-invite-time 60
447    
448     set global-chanset {
449     -autoop -autovoice
450     -bitch +cycle
451     +dontkickops +dynamicbans
452     +dynamicexempts +dynamicinvites
453     -enforcebans +greet
454     -inactive -nodesynch
455     -protectfriends +protectops
456     -revenge -revengebot
457     -secret -seen
458     +shared +statuslog
459     +userbans +userexempts
460     +userinvites -protecthalfops
461     -autohalfop
462     }
463    
464     # Add each static channel you want your bot to sit in using the following
465     # command. There are many different possible settings you can insert into
466     # this command, which are explained below.
467     #
468     # channel add #lamest {
469     # chanmode "+nt-likm"
470     # idle-kick 0
471     # stopnethack-mode 0
472     # revenge-mode 1
473     # ban-time 120
474     # exempt-time 60
475     # invite-time 60
476     # aop-delay 5:30
477     # need-op { putserv "PRIVMSG #lamest :op me cos i'm lame!" }
478     # need-invite { putserv "PRIVMSG #lamest :let me in!" }
479     # need-key { putserv "PRIVMSG #lamest :let me in!" }
480     # need-unban { putserv "PRIVMSG #lamest :let me in!" }
481     # need-limit { putserv "PRIVMSG #lamest :let me in!" }
482     # flood-chan 10:60
483     # flood-deop 3:10
484     # flood-kick 3:10
485     # flood-join 5:60
486     # flood-ctcp 3:60
487     # flood-nick 5:60
488     # }
489     #
490     # chanmode +/-<modes>
491     # This setting makes the bot enforce channel modes. It will always add
492     # the +<modes> and remove the -<modes> modes.
493     # idle-kick 0
494     # This setting will make the bot check every minute for idle
495     # users. Set this to 0 to disable idle check.
496     #
497     # stopnethack-mode 0
498     # This setting will make the bot de-op anyone who enters the channel
499     # with serverops. There're seven different modes for this settings:
500     # 0 turn off,
501     # 1 isoptest (allow serverop if registered op)
502     # 2 wasoptest (allow serverop if op before split)
503     # 3 allow serverop if isop or wasop
504     # 4 allow serverop if isop and wasop.
505     # 5 If the channel is -bitch, see stopnethack-mode 3
506     # If the channel is +bitch, see stopnethack-mode 1
507     # 6 If the channel is -bitch, see stopnethack-mode 2
508     # If the channel is +bitch, see stopnethack-mode 4
509     #
510     # revenge-mode 1
511     # This settings defines how the bot should punish bad users when
512     # revenging. There are four possible settings:
513     # 0 Deop the user.
514     # 1 Deop the user and give them the +d flag for the channel.
515     # 2 Deop the user, give them the +d flag for the channel, and kick them.
516     # 3 Deop the user, give them the +d flag for the channel, kick, and ban them.
517     #
518     # ban-time 120
519     # Set here how long temporary bans will last (in minutes). If you
520     # set this setting to 0, the bot will never remove them.
521     #
522     # exempt-time 60
523     # Set here how long temporary exempts will last (in minutes). If you
524     # set this setting to 0, the bot will never remove them. The bot will
525     # check the exempts every X minutes, but will not remove the exempt if
526     # a ban is set on the channel that matches that exempt. Once the ban is
527     # removed, then the exempt will be removed the next time the bot checks.
528     # Please note that this is an IRCnet feature.
529     #
530     # invite-time 60
531     # Set here how long temporary invites will last (in minutes). If you
532     # set this setting to 0, the bot will never remove them. The bot will
533     # check the invites every X minutes, but will not remove the invite if
534     # a channel is set to +i. Once the channel is -i then the invite will be
535     # removed the next time the bot checks. Please note that this is an IRCnet
536     # feature.
537     #
538     # aop-delay (minimum:maximum)
539     # This is used for autoop, autohalfop, autovoice. If an op or voice joins a
540     # channel while another op or voice is pending, the bot will attempt to put
541     # both modes on one line.
542     # aop-delay 0 No delay is used.
543     # aop-delay X An X second delay is used.
544     # aop-delay X:Y A random delay between X and Y is used.
545     #
546     # need-op { putserv "PRIVMSG #lamest :op me cos i'm lame!" }
547     # This setting will make the bot run the script enclosed in brackets
548     # if it does not have ops. This must be shorter than 120 characters.
549     # If you use scripts like getops.tcl or botnetop.tcl, you don't need
550     # to set this setting.
551     #
552     # need-invite { putserv "PRIVMSG #lamest :let me in!" }
553     # This setting will make the bot run the script enclosed in brackets
554     # if it needs an invite to the channel. This must be shorter than 120
555     # characters. If you use scripts like getops.tcl or botnetop.tcl, you
556     # don't need to set this setting.
557     #
558     # need-key { putserv "PRIVMSG #lamest :let me in!" }
559     # This setting will make the bot run the script enclosed in brackets
560     # if it needs the key to the channel. This must be shorter than 120
561     # characters. If you use scripts like getops.tcl or botnetop.tcl, you
562     # don't need to set this setting
563     #
564     # need-unban { putserv "PRIVMSG #lamest :let me in!" }
565     # This setting will make the bot run the script enclosed in brackets
566     # if it needs to be unbanned on the channel. This must be shorter than
567     # 120 characters. If you use scripts like getops.tcl or botnetop.tcl,
568     # you don't need to set this setting
569     #
570     # need-limit { putserv "PRIVMSG #lamest :let me in!" }
571     # This setting will make the bot run the script enclosed in brackets
572     # if it needs the limit to be raised on the channel. This must be
573     # shorter than 120 characters. If you use scripts like getops.tcl or
574     # botnetop.tcl, you don't need to set this setting
575     #
576     # flood-chan 10:60
577     # Set here how many channel messages in how many seconds from one
578     # host constitutes a flood. Setting this to 0 or 0:0 disables
579     # flood protection for the channel.
580     #
581     # flood-deop 3:10
582     # Set here how many deops in how many seconds from one host constitutes
583     # a flood. Setting this to 0 or 0:0 disables deop flood protection for
584     # the channel.
585     #
586     # flood-kick 3:10
587     # Set here how many kicks in how many seconds from one host constitutes
588     # a flood. Setting this to 0 or 0:0 disables kick flood protection for
589     # the channel.
590     #
591     # flood-join 5:60
592     # Set here how many joins in how many seconds from one host constitutes
593     # a flood. Setting this to 0 or 0:0 disables join flood protection for
594     # the channel.
595     #
596     # flood-ctcp 3:60
597     # Set here how many channel ctcps in how many seconds from one host
598     # constitutes a flood. Setting this to 0 or 0:0 disables ctcp flood
599     # protection for the channel.
600     #
601     # flood-nick 5:60
602     # Set here how many nick changes in how many seconds from one host
603     # constitutes a flood. Setting this to 0 or 0:0 disables nick flood
604     # protection for the channel.
605     #
606     # There are many different options for channels which you can
607     # define. They can be enabled or disabled using the channel set command by a
608     # plus or minus in front of them.
609     #
610     # channel set #lamest +enforcebans +dynamicbans +userbans +dynamicexempts
611     # channel set #lamest +userexempts +dynamicinvites +userinvites +protectops
612     # channel set #lamest +protectfriends +statuslog +revenge -protecthalfops
613     # channel set #lamest +revengebot +dontkickops +autovoice -autoop -autohalfop
614     # channel set #lamest -bitch -secret -shared +greet +cycle
615     #
616     # A complete list of all available channel settings:
617     #
618     # enforcebans
619     # When a ban is set, kick people who are on the channel and match
620     # the ban?
621     #
622     # dynamicbans
623     # Only activate bans on the channel when necessary? This keeps
624     # the channel's ban list from getting excessively long. The bot
625     # still remembers every ban, but it only activates a ban on the
626     # channel when it sees someone join who matches that ban.
627     #
628     # userbans
629     # Allow bans to be made by users directly? If turned off, the bot
630     # will require all bans to be made through the bot's console.
631     #
632     # dynamicexempts
633     # Only activate exempts on the channel when necessary? This keeps
634     # the channel's exempt list from getting excessively long. The bot
635     # still remembers every exempt, but it only activates a exempt on
636     # the channel when it sees a ban set that matches the exempt. The
637     # exempt remains active on the channel for as long as the ban is
638     # still active.
639     #
640     # userexempts
641     # Allow exempts to be made by users directly? If turned off, the
642     # bot will require all exempts to be made through the bot's console.
643     #
644     # dynamicinvites
645     # Only activate invites on the channel when necessary? This keeps
646     # the channel's invite list from getting excessively long. The bot
647     # still remembers every invite, but the invites are only activated
648     # when the channel is set to invite only and a user joins after
649     # requesting an invite. Once set, the invite remains until the
650     # channel goes to -i.
651     #
652     # userinvites
653     # Allow invites to be made by users directly? If turned off, the
654     # bot will require all invites to be made through the bot's console.
655     #
656     # autoop
657     # Op users with the +o flag as soon as they join the channel?
658     # This is insecure and not recommended.
659     #
660     # authalfoop
661     # Halfop users with the +l flag as soon as they join the channel?
662     # This is insecure and not recommended.
663     #
664     # bitch
665     # Only let users with +o) flag be opped on the channel?
666     #
667     # greet
668     # Say a user's info line when they join the channel?
669     #
670     # protectops
671     # Re-op a user with the +o flag if they get deopped?
672     #
673     # protecthalfops
674     # Re-halfop a user with the +l flag if they get dehalfopped?
675     #
676     # protectfriends
677     # Re-op a user with the +f flag if they get deopped?
678     #
679     # statuslog
680     # Log the channel status line every 5 minutes? This shows the bot's
681     # status on the channel (op, voice, etc.), The channel's modes, and
682     # the number of +m/+o/+v/+n/+b/+e/+I users on the channel. A sample
683     # status line follows:
684     #
685     # [01:40] @#lamest (+istn) : [m/1 o/1 v/4 n/7 b/1 e/5 I/7]
686     #
687     # revenge
688     # Remember people who deop/kick/ban the bot, valid ops, or friends
689     # and punish them? Users with the +f flag are exempt from revenge.
690     #
691     # revengebot
692     # This is similar to to the 'revenge' option, but it only triggers
693     # if a bot gets deopped, kicked or banned.
694     #
695     # autovoice
696     # Voice users with the +v flag when they join the channel?
697     #
698     # secret
699     # Prevent this channel from being listed on the botnet?
700     #
701     # shared
702     # Share channel-related user info for this channel?
703     #
704     # cycle
705     # Cycle the channel when it has no ops?
706     #
707     # dontkickops
708     # Do you want the bot not to be able to kick users who have the +o
709     # flag, letting them kick-flood for instance to protect the channel
710     # against clone attacks.
711     #
712     # inactive
713     # This prevents the bot from joining the channel (or makes it leave
714     # the channel if it is already there). It can be useful to make the
715     # bot leave a channel without losing its settings, channel-specific
716     # user flags, channel bans, and without affecting sharing.
717     #
718     # seen
719     # Respond to seen requests in the channel? The seen module must be
720     # loaded for this to work.
721     #
722     # nodesynch
723     # Allow non-ops to perform channel modes? This can stop the bot from
724     # fighting with services such as ChanServ, or from kicking IRCops when
725     # setting channel modes without having ops.
726     #
727     # Here is a shorter example:
728     #
729     # channel add #botcentral {
730     # chanmode "+mntisl 1"
731     # idle-kick 1
732     # }
733     # channel set #botcentral +bitch +enforcebans -greet +revenge
734    
735    
736     #### SERVER MODULE ####
737    
738     # This module provides the core server support. You have to load this
739     # if you want your bot to come on IRC. Not loading this is equivalent
740     # to the old NO_IRC define.
741     loadmodule server
742    
743     # What is your network?
744     # 0 = EFnet (non +e/+I hybrid)
745     # 1 = IRCnet
746     # 2 = Undernet
747     # 3 = DALnet
748     # 4 = EFnet +e/+I hybrid
749     # 5 = Others
750     set net-type 0
751    
752     # Set the nick the bot uses on IRC, and on the botnet
753     # unless you specify a separate botnet-nick, here.
754    
755     set nick "Lamestbot"
756    
757     # Set the alternative nick which the bot uses on IRC if the nick specified
758     # by 'set nick' is unavailable. All '?' characters will be replaced by random
759     # numbers.
760    
761     set altnick "Llamab?t"
762    
763     # Set what should be displayed in the real-name field for the bot on IRC.
764     set realname "/msg LamestBot hello"
765    
766     # Set here a script to run (if any) when first connecting to a server.
767     # This is limited to 120 characters.
768     set init-server { putserv "MODE $botnick +i-ws" }
769    
770     # Set the default port which should be used if none is specified with
771     # '.jump' or in 'set servers'.
772     set default-port 6667
773    
774     # This is the bot's server list. The bot will start at the first server listed,
775     # and cycle through them whenever it gets disconnected. You need to change these
776     # servers to YOUR network's servers.
777     #
778     # The format is:
779     # server[:port[:password]]
780     #
781     # Both the port and password fields are optional; however, if you want to set a
782     # password you must also set a port. If a port isn't specified it will default to
783     # your default-port setting.
784     set servers {
785     you.need.to.change.this:6667
786     another.example.com:7000
787     }
788    
789     # This setting makes the bot try to get his original nickname back if its
790     # primary nickname is already in use.
791     set keep-nick 1
792    
793     # Set this to 1 if you don't want your the bot to strip a leading '~'
794     # on user@hosts.
795     set strict-host 0
796    
797     # This setting makes the bot squelch the error message when rejecting a DCC
798     # CHAT or SEND. Normally it tells the DCC user that the CHAT or SEND has
799     # been rejected because they don't have access.
800     # Please note, sometimes IRC server operators detect bots that way.
801     set quiet-reject 1
802    
803     # If you want your bot to answer lower case ctcp requests (non rfc-
804     # compliant), set this setting to 1. mIRC will do this, most other
805     # clients will not.
806     set lowercase-ctcp 0
807    
808     # Set how many ctcps should be answered at once.
809     set answer-ctcp 3
810    
811     # Set here how many msgs in how many seconds from one host constitutes
812     # a flood. If you set this to 0:0, msg flood protection will be disabled.
813     set flood-msg 5:60
814    
815     # Set here how many ctcps in how many seconds from one host constitutes
816     # a flood. If you set this to 0:0, ctcp flood protection will be disabled.
817     set flood-ctcp 3:60
818    
819     # This settings makes the bot cycle forever through the server list until
820     # it successfully connects to one.
821     set never-give-up 1
822    
823     # Often, IRC servers call themselves a name other than their actual
824     # hostname. If you want Eggdrop to replace your entry in the config
825     # file with this name, set this to 1. If you set this setting to 0,
826     # Eggdrop will keep a separate list of what IRC servers call themselves.
827     set strict-servernames 0
828    
829     # This setting defines how long Eggdrop should wait before moving from one
830     # server to another on disconnect. If you set 0 here, Eggdrop will not wait
831     # at all and will connect instantly. Setting this too low could result in
832     # your bot being K:Lined.
833     set server-cycle-wait 60
834    
835     # Set here how long Eggdrop should wait for a response when connecting to a
836     # server before giving up and moving on to next server.
837     set server-timeout 60
838    
839     # If the number of servers on the net gets below this number, the bot
840     # will jump to a new server (it will assume it's on the losing end of
841     # a netsplit). Set this to 0 to turn off. If your bot is running on
842     # any major IRC network, this should probably be turned off.
843     set servlimit 0
844    
845     # Set this to 1 if Eggdrop should check for stoned servers? (where the
846     # server connection has died, but Eggdrop hasn't been notified yet).
847     set check-stoned 1
848    
849     # This setting allows you the logging of all information received from the
850     # server via console mode 'r'.
851     # NOTE: This is a large security hole, allowing people to see user passwords.
852     # This is now restricted to +n users only. Please choose your owners with
853     # care.
854     set use-console-r 0
855    
856     # This setting allows you the logging of all information sent to the server
857     # via console/log mode 'v'. It also allows logging of botnet traffic via
858     # console/log mode 't'.
859     # NOTE: This is a large security hole, allowing people to see passwords.
860     # This is now restricted to +n users only. Please choose your owners with
861     # care.
862     set debug-output 0
863    
864     # If you want your bot to exit the server if it receives an ERROR message,
865     # set this to 1.
866     set serverror-quit 1
867    
868     # Set here the maximum number of lines to queue to the server. If you're
869     # going to dump large chunks of text to people over IRC, you will probably
870     # want to raise this. 300 is fine for most people though.
871     set max-queue-msg 300
872    
873     # If you want Eggdrop to trigger binds for ignored users, set this to 1.
874     set trigger-on-ignore 0
875    
876     # Allow identical messages in the mode queue?
877     set double-mode 0
878    
879     # Allow identical messages in the server queue?
880     set double-server 0
881    
882     # Allow identical messages in the help queue?
883     set double-help 0
884    
885     # This optimizes the kick queue. It also traces nick changes and parts in
886     # the channel and changes the kick queue accordingly. There are three
887     # different options for this setting:
888     # 0 = Turn it off.
889     # 1 = Optimize the kick queue by summarizing kicks.
890     # 2 = Trace nick changes and parts on the channel and change the queue
891     # accordingly. For example, bot will not try to kick users who have
892     # already parted the channel.
893     # ATTENTION: Setting 2 is very CPU intensive.
894     set optimize-kicks 1
895    
896     ### SERVER MODULE - OTHER NETWORKS (net-type 5) ###
897    
898     # This settings defines how umode +r is understood by Eggdrop. Some
899     # networks use +r to indicate a restricted connection. If this is your
900     # case, and you want your bot to leave restricted servers and jump to
901     # the next server on its list, then set it to 1.
902     #set check-mode-r 1
903    
904     # This setting allows you to specify the maximum nick-length supported by
905     # your network. The default setting is 9. The maximum supported length by
906     # Eggdrop is 32.
907     #set nick-len 9
908    
909     #### CTCP MODULE ####
910    
911     # This module provides the normal ctcp replies that you'd expect.
912     # Without it loaded, CTCP CHAT will not work. The server module
913     # is required for this module to function.
914     loadmodule ctcp
915    
916     # Set here how the ctcp module should answer ctcps. There are 3 possible
917     # operating modes:
918     # 0: Normal behavior is used.
919     # 1: The bot ignores all ctcps, except for CHAT and PING requests
920     # by users with the +o flag.
921     # 2: Normal behavior is used, however the bot will not answer more
922     # than X ctcps in Y seconds (defined by 'set flood-ctcp').
923     set ctcp-mode 0
924    
925     # There are also several variables to help make your bot less noticeable.
926     # They are: ctcp-version, ctcp-finger, and ctcp-userinfo. You can use set to set
927     # them to values you'd like.
928    
929    
930     #### IRC MODULE ####
931    
932     # This module provides basic IRC support for your bot. You have to
933     # load this if you want your bot to come on IRC. The server and channels
934     # modules must be loaded for this module to function.
935     loadmodule irc
936    
937     # Set this to 1 if you want to bounce all server bans.
938     set bounce-bans 1
939    
940     # Set this to 1 if you want to bounce all server modes.
941     set bounce-modes 0
942    
943     # Set here the maximum number of bans you want the bot to set on a channel.
944     # Eggdrop will not place any more bans if this limit is reached. Undernet
945     # and IRCnet currently allow 30 bans, EFnet allows 20, and DALnet allows 100.
946     set max-bans 20
947    
948     # There is a global limit for +b/+e/+I modes. This limit is currently set to
949     # 30 on IRCu 2.10 servers.
950     set max-modes 30
951    
952     # Set this to 1 if you want the bot to kick for control character/ctcp
953     # avalanches to a channel. Remember that if it does, it won't ban them.
954     # This can start kick floods.
955     set kick-fun 0
956    
957     # Set this to 1 if you want the bot to ban for control character/ctcp
958     # avalanches to a channel. This can prevent kick floods, but it also can
959     # fill the banlist.
960     set ban-fun 0
961    
962     # If you want people to be able to add themselves to the bot's userlist
963     # with the default userflags (defined above in the config file) via the
964     # 'hello' msg command, set this to 1.
965     set learn-users 0
966    
967     # Set here the time (in seconds) to wait for someone to return from
968     # a netsplit (i.e. wasop will expire afterwards). Set this to 1500
969     # on IRCnet since its nick delay stops after 30 minutes.
970     set wait-split 600
971    
972     # Set here the time (in seconds) that someone must have been off-channel
973     # before re-displaying their info line.
974     set wait-info 180
975    
976     # Set this to the maximum number of bytes to send in the arguments
977     # of modes sent to the server. Most servers default this to 200.
978     set mode-buf-length 200
979    
980     # Many IRCops find bots by seeing if they reply to 'hello' in a msg.
981     # You can change this to another word by un-commenting the following
982     # two lines and changing "myword" to the word wish to use instead of
983     # 'hello'. It must be a single word.
984     #unbind msg - hello *msg:hello
985     #bind msg - myword *msg:hello
986    
987     # Many takeover attempts occur due to lame users blindly /msg ident'ing to
988     # the bot and attempting to guess passwords. We now unbind this command by
989     # default to discourage them. You can enable this command by un-commenting
990     # the following two lines.
991     unbind msg - ident *msg:ident
992     unbind msg - addhost *msg:addhost
993    
994     # If you are so lame you want the bot to display peoples info lines, even
995     # when you are too lazy to add their chanrecs to a channel, set this to 1.
996     # *NOTE* This means *every* user with an info line will have their info
997     # line displayed on EVERY channel they join (provided they have been gone
998     # longer than wait-info).
999     set no-chanrec-info 0
1000    
1001     ### IRC MODULE - IRCnet SPECIFIC FEATURES (net-type 1) ###
1002    
1003     # Attention: Use these settings *only* if you set 'net-type' to 1!
1004    
1005     # Set this to 1 if you want to bounce all server exemptions (+e modes).
1006     set bounce-exempts 0
1007    
1008     # Set this to 1 if you want to bounce all server invitations (+I modes).
1009     set bounce-invites 0
1010    
1011     # Set here the maximum number of exempts you want Eggdrop to set
1012     # on a channel. Eggdrop will not place any more exempts if this
1013     # limit is reached.
1014     set max-exempts 20
1015    
1016     # Set here the maximum number of invites you want Eggdrop to set
1017     # on a channel. Eggdrop will not place any more invites if this
1018     # limit is reached.
1019     set max-invites 20
1020    
1021     # The following settings should be left commented unless the default values
1022     # are being overridden. By default, exempts and invites are on for IRCnet,
1023     # but off for all other large networks. This behavior can be modified with
1024     # the following 2 flags. If your network doesn't support +e/+I modes then you
1025     # will be unable to use these features.
1026     #
1027     # Do you want to enable exempts?
1028     #set use-exempts 0
1029    
1030     # Do you want to use invites?
1031     #set use-invites 0
1032    
1033     # At the moment, the current IRCnet IRCd version (2.10) doesn't support the mixing
1034     # of b,o and v modes with e and I modes. This might be changed in the future, so
1035     # use 1 at the moment for this setting.
1036     set prevent-mixing 1
1037    
1038     ### IRC MODULE - OTHER NETWORKS (net-type 5) ###
1039    
1040     # Attention: Use these settings *only* if you set 'net-type' to 5!
1041    
1042     # If your network supports more users per kick command then 1, you can
1043     # change this behavior here. Set this to the number of users to kick at
1044     # once, or set this to 0 for all at once.
1045     #set kick-method 1
1046    
1047     # Some networks allow you to stack lots of channel modes into one line.
1048     # They're all guaranteed to support at least 3, so that's the default.
1049     # If you know your network supports more, you may want to adjust this.
1050     #set modes-per-line 3
1051    
1052     # Some networks don't include the +l limit and +k or -k key modes
1053     # in the modes-per-line (see above) limitation. Set include-lk to 0 for
1054     # these networks.
1055     #set include-lk 1
1056    
1057     # Set this to 1 if your network uses IRCu2.10.01 specific /who requests.
1058     # Eggdrop can, therefore, ask only for exactly what's needed.
1059     #set use-354 0
1060    
1061     # If your network doesn't use rfc 1459 compliant string matching routines,
1062     # set this to 0.
1063     #set rfc-compliant 1
1064    
1065    
1066     #### TRANSFER MODULE ####
1067    
1068     # The transfer module provides dcc send/get support and userfile transfer
1069     # support for userfile sharing. Un-comment the next line to load it if you
1070     # need this functionality.
1071     #loadmodule transfer
1072    
1073     # Set here the maximum number of simultaneous downloads to allow for
1074     # each user.
1075     set max-dloads 3
1076    
1077     # Set here the block size for dcc transfers. ircII uses 512 bytes,
1078     # but admits that may be too small. 1024 is standard these days.
1079     # Set this to 0 to use turbo-dcc (recommended).
1080     set dcc-block 1024
1081    
1082     # Enable this setting if you want to copy files into the /tmp directory
1083     # before sending them. This is useful on most systems for file stability,
1084     # but if your directories are NFS mounted, it's a pain, and you'll want
1085     # to set this to 0. If you are low on disk space, you may also want to
1086     # set this to 0.
1087     set copy-to-tmp 1
1088    
1089     # Set here the time (in seconds) to wait before an inactive transfer
1090     # times out.
1091     set xfer-timeout 30
1092    
1093    
1094     #### SHARE MODULE ####
1095    
1096     # This module provides userfile sharing support between two directly
1097     # linked bots. The transfer and channels modules are required for this
1098     # module to correctly function. Un-comment the following line to load
1099     # the share module.
1100     #loadmodule share
1101    
1102     # Settings in this section must be un-commented before setting.
1103    
1104     # When two bots get disconnected, this setting allows them to create a
1105     # resync buffer which saves all changes done to the userfile during
1106     # the disconnect. When they reconnect, they will not have to transfer
1107     # the complete user file, but, instead, just send the resync buffer.
1108     #
1109     # NOTE: This has been known to cause loss of channel flags and other
1110     # problems. Using this setting is not recommended.
1111     #set allow-resync 0
1112    
1113     # This setting specifies how long to hold another bots resync data
1114     # before flushing it.
1115     #set resync-time 900
1116    
1117     # When sharing user lists, DON'T ACCEPT global flag changes from other bots?
1118     # NOTE: The bot will still send changes made on the bot, it just won't accept
1119     # any global flag changes from other bots.
1120     #set private-global 0
1121    
1122     # When sharing user lists, if private-global isn't set, which global flag
1123     # changes from other bots should be ignored?
1124     #set private-globals "mnot"
1125    
1126     # When sharing user lists, don't accept ANY userfile changes from other
1127     # bots? Paranoid people should use this feature on their hub bot. This
1128     # will force all userlist changes to be made via the hub.
1129     #set private-user 0
1130    
1131     # This setting makes the bot discard its own bot records in favor of
1132     # the ones sent by the hub.
1133     # NOTE: No passwords or botflags are shared, only ports and
1134     # address are added to sharing procedure. This only works with hubs that
1135     # are v1.5.1 or higher.
1136     #set override-bots 0
1137    
1138    
1139     #### COMPRESS MODULE ####
1140    
1141     # This module provides provides support for file compression. This allows the
1142     # bot to transfer compressed user files and therefore save a significant amount
1143     # of bandwidth. The share module must be loaded to load this module. Un-comment
1144     # the following line to the compress module.
1145     #loadmodule compress
1146    
1147     # Allow compressed sending of user files? The user files are
1148     # compressed with the compression level defined in `compress-level'.
1149     set share-compressed 1
1150    
1151     # This is the default compression level used.
1152     #set compress-level 9
1153    
1154    
1155     #### FILESYSTEM MODULE ####
1156    
1157     # This module provides an area within the bot where users can store
1158     # files. With this module, the bot is usable as a file server. The
1159     # transfer module is required for this module to function. Un-comment
1160     # the following line to load the filesys module.
1161     #loadmodule filesys
1162    
1163     # Set here the 'root' directory for the file system.
1164     set files-path "/home/mydir/filesys"
1165    
1166     # If you want to allow uploads, set this to the directory uploads
1167     # should be put into. Set this to "" if you don't want people to
1168     # upload files to your bot.
1169     set incoming-path "/home/mydir/filesys/incoming"
1170    
1171     # If you don't want to have a central incoming directory, but instead
1172     # want uploads to go to the current directory that a user is in, set
1173     # this setting to 1.
1174     set upload-to-pwd 0
1175    
1176     # Eggdrop creates a '.filedb' file in each subdirectory of your file area
1177     # to keep track of its own file system information. If you can't do that (for
1178     # example, if the dcc path isn't owned by you, or you just don't want it to do
1179     # that) specify a path here where you'd like all of the database files to be
1180     # stored instead.
1181     set filedb-path ""
1182    
1183     # Set here the maximum number of people that can be in the file area at once.
1184     # Setting this to 0 makes it effectively infinite.
1185     set max-file-users 20
1186    
1187     # Set here the maximum allowable file size that will be received (in kb).
1188     # Setting this to 0 makes it effectively infinite.
1189     set max-filesize 1024
1190    
1191    
1192     #### NOTES MODULE ####
1193    
1194     # This module provides support for storing of notes for users from each
1195     # other. Note sending between currently online users is supported in the
1196     # core, this is only for storing the notes for later retrieval.
1197     loadmodule notes
1198    
1199     # Set here the filename where private notes between users are stored.
1200     set notefile "LamestBot.notes"
1201    
1202     # Set here the maximum number of notes to allow to be stored for
1203     # each user (to prevent flooding).
1204     set max-notes 50
1205    
1206     # Set here how long (in days) to store notes before expiring them.
1207     set note-life 60
1208    
1209     # Set this to 1 if you want to allow users to specify a forwarding
1210     # address for forwarding notes to another account on another bot.
1211     set allow-fwd 0
1212    
1213     # Set this to 1 if you want the bot to let people know hourly if they
1214     # have any notes.
1215     set notify-users 1
1216    
1217     # Set this to 1 if you want the bot to let people know on join if they
1218     # have any notes.
1219     set notify-onjoin 1
1220    
1221     # Comment out this next line. Otherwise, your bot won't start.
1222     die "You didn't edit your config file completely like you were told, did you?"
1223    
1224    
1225     #### CONSOLE MODULE ####
1226    
1227     # This module provides storage of console settings when you exit the
1228     # bot or type .store on the partyline.
1229     loadmodule console
1230    
1231     # Save users console settings automatically? Otherwise, they have
1232     # to use the .store command.
1233     set console-autosave 1
1234    
1235     # If a user doesn't have any console settings saved, which channel
1236     # do you want them automatically put on?
1237     set force-channel 0
1238    
1239     # Enable this setting if a user's global info line should be displayed
1240     # when they join a botnet channel.
1241     set info-party 0
1242    
1243    
1244     #### WOOBIE MODULE ####
1245    
1246     # This is for demonstrative purposes only. If you are looking for starting
1247     # point in writing modules, woobie is the right thing.
1248     #loadmodule woobie
1249    
1250    
1251     #### SEEN MODULE ####
1252    
1253     # This module provides very basic seen commands via msg, on channel or via dcc.
1254     # This module works only for users in the bot's userlist. If you are looking for
1255     # a better and more advanced seen module, try the gseen module by G'Quann. You
1256     # can find it at http://www.visions-of-fantasy.de/gseen.mod/.
1257     #loadmodule seen
1258    
1259    
1260     #### BLOWFISH MODULE ####
1261    
1262     # IF YOU DON'T READ THIS YOU MAY RENDER YOUR USERFILE USELESS LATER
1263     # Eggdrop encrypts its userfile, so users can have secure passwords.
1264     # Please note that when you change your encryption method later (i.e.
1265     # using other modules like a md5 module), you can't use your current
1266     # userfile anymore. Eggdrop will not start without an encryption module.
1267     #loadmodule blowfish
1268    
1269    
1270     #### ASSOC MODULE ####
1271    
1272     # This module provides assoc support, i.e. naming channels on the botnet.
1273     # You can load it by un-commenting the following line.
1274     #loadmodule assoc
1275    
1276    
1277     #### WIRE MODULE ####
1278    
1279     # This module provides all the standard .wire commands via dcc. It is an
1280     # encrypted partyline communication tool, compatible with wire.tcl. An
1281     # encryption module must be loaded to use this module. Un-comment the
1282     # following line to load the wire module.
1283     #loadmodule wire
1284    
1285     #### UPTIME MODULE ####
1286    
1287     # This module reports uptime statistics to http://uptime.eggheads.org.
1288     # Go look and see what your uptime is! It takes about 9 hours to show up,
1289     # so if your bot isn't listed, try again later. The server module must be
1290     # loaded for this module to function.
1291     #
1292     # Information sent to the server includes the bot's uptime, botnet-nick,
1293     # server, version, and IP address. This information is stored in a temporary
1294     # logfile for debugging purposes only. The only publicly available information
1295     # will be the bot's botnet-nick, version and uptime. If you do not wish for this
1296     # information to be sent, comment out the following line.
1297     loadmodule uptime
1298    
1299     ##### SCRIPTS #####
1300    
1301     # This is a good place to load scripts to use with your bot.
1302    
1303     # This line loads script.tcl from the scripts directory inside your Eggdrop's
1304     # directory. All scripts should be put there, although you can place them where
1305     # you like as long as you can supply a fully qualified path to them.
1306     #
1307     # source scripts/script.tcl
1308    
1309     source scripts/alltools.tcl
1310     source scripts/action.fix.tcl
1311    
1312     # Use this script for Tcl and Eggdrop downwards compatibility.
1313     # NOTE: This can also cause problems with some newer scripts.
1314     source scripts/compat.tcl
1315    
1316     # This script provides many useful informational functions, like setting
1317     # users' URLs, e-mail address, ICQ numbers, etc. You can modify it to add
1318     # extra entries.
1319     source scripts/userinfo.tcl
1320     loadhelp userinfo.help

webmaster@eggheads.org
ViewVC Help
Powered by ViewVC 1.1.23