viewvc/eggdrop1.4/eggdrop.conf.dist

#! /path/to/eggdrop
# ^- set that to the directory eggdrop is in ie "#! /users/lamest/egg/eggdrop"
#
# $Id: eggdrop.conf.dist,v 1.43 2000/06/04 08:26:41 guppy Exp $
#
# This is a sample configuration file for your bot.  You will definitely
# want to edit this, to set up your bot.  Right now it creates a bot called
# "LamestBot" which sits on channel #lamest.
#
# PLEASE EDIT THIS FILE COMPLETELY! YOUR BOT WILL NOT FUNCTION PROPERLY IF
# YOU DO NOT CONFIGURE IT CORRECTLY! WE CAN NOT STRESS THIS ENOUGH!
#
# NOTE: Please choose your +n (owner) users carefully! They have COMPLETE
# access to your bot *AND* account! Only pick ones you trust!
#
# The config file will now check which version you are running and
# complain if it doesn't match. Things are changing rapidly with eggdrop
# now, and you need to redo the config file every time, using your last
# config file as a model.

# IMPORTANT: Remember to make install and cd to the directory it created
# (~/eggdrop by default) before you continue, running the bot from
# eggdrop1.4.xx/ will not work.

##### GENERAL STUFF #####

# the username the bot uses, this is only used if identd isn't working
# on the machine the bot is running on.
set username "lamest"

# who's running this bot?
set admin "Lamer <email: lamer@lamest.lame.org>"

# what IRC network are you on?  this is just info to share with others on
# your botnet, for human curiosity only.
set network "I.didnt.edit.my.config.file.net"

# what timezone is your bot in? This timezone string specifies
# the name of your timezone. It must be three or more alpabetic
# characters long.
#
# ie: Central European Time (UTC+1) would be "CET"
set timezone "EST"

# Offset is the amount of time to be added or subtracted from
# the local timezone to figure out UTC (aka GMT).
#
# If your bot is running west of the Prime Merdidian then your
# offset will be a positive value; however, if east it will be
# a negative value. (ie: your timezone is UTC+1, offset would be
# -1)
set offset "5"

# If you want the timezone setting to take effect for your Eggdrop
# (ie: logging and logfiles) then uncomment the following line
#set env(TZ) "$timezone $offset"

# if you're using virtual hosting (your machine has more than 1 IP), you
# may want to specify the particular IP to bind to.  you can specify
# either by hostname or by IP.  you may also want to set the hostname
# here if eggdrop has trouble detecting it when it starts up.  (it will
# let you know if it has trouble -- trust me.)
#set my-hostname "virtual.host.com"
#set my-ip "99.99.0.0"

# if you want to have your eggdrop messages displayed in another language
# change the below command to match your preferences. An alternative would
# be to set the environment variabel EGG_LANG to that value.
#addlang "english"


##### LOG FILES #####

# you can specify how many log files you can have upto.  at midnight every
# day, the old log files are renamed and a new log file begins.  by default,
# the old one is called "(logfilename).yesterday", and any logfiles before
# yesterday are erased.

# events are logged by certain categories -- this way you can specify
# exactly what kind of events you want sent to various logfiles.  the
# events are:
#   m  private msgs/ctcps to the bot
#   k  kicks, bans, mode changes on the channel
#   j  joins, parts, netsplits on the channel
#   p  public chatter on the channel
#   s  server connects/disconnects/notices
#   b  information about bot linking and userfile sharing
#   c  commands people use (via msg or dcc)
#   x  file transfers and file-area commands
#   r  (if use-console-r defined) EVERYTHING sent to the bot by the server
#   o  other: misc info, errors -- IMPORTANT STUFF
#   w  wallops: msgs between IRCops (be sure to set the bot +w in init-server)
# There are others, but you probably shouldnt log them, it'd be rather
# unethical ;)

# maximum number of logfiles to allow - this can be increased if needed
# (don't decrease this)
set max-logs 5

# maximum size of your logfiles, set this to 0 to disable.
# this only works if you have keep-all-logs 0 (OFF)
# this value is in KiloBytes, so '550' would mean cycle logs when
# it reaches the size of 550 KiloBytes.
set max-logsize 0

# write the logfiles and check the size every minute
# (if max-logsize is enabled) instead of every 5minutes as before.
# This could be good if you have had problem with the
# logfile filling your quota or hdd or if you log +p
# and publish it on the web and wants more uptodate info.
# If you are concerned with resources keep the default setting 0.
# (although I haven't noticed anything)
set quick-logs 0

# each logfile also belongs to a certain channel.  events of type 'k', 'j',
# and 'p' are logged to whatever channel they happened on.  most other
# events are currently logged to every channel.  you can make a logfile
# belong to all channels by assigning it to channel "*".  there are also
# five user-defined levels ('1'..'5') which are used by Tcl scripts.

# in 'eggdrop.log' put private msgs/ctcps, commands, misc info, and
# errors from any channel:
logfile mco * "eggdrop.log"
# in 'lame.log' put joins, parts, kicks, bans, and mode changes from #lamest:
logfile jk #lamest "lamest.log"

# [0/1] timestamp entries in the log file? (generally a good idea)
set log-time 1

# [0/1] keep logfiles for more than 48 hours -- instead of being called
# "(logfilename).yesterday", the log files are named by the current date,
# and kept around forever (eventually your directory might get full, so
# be careful with this!)
set keep-all-logs 0

# once a day the logfiles are switched out and started fresh --
# this specifies when that should happen (in military time)
# [note that a leading 0 will make Tcl think this is an octal value,
# something you probably don't want.]
set switch-logfiles-at 300

# [0/1] enable quiet saves? "Writing user file..." and "Writing channel file ..."
# will not be logged if this option is enabled.
set quiet-save 0

# this is the default console mode -- what masters will see automatically
# when they dcc chat with the bot (masters can alter their own console
# flags once they connect, though) -- it uses the same event flags as
# the log files
# (note that the console channel is automatically set to your "primary"
# channel -- the one you defined first in this file.  masters can change
# their console channel with the '.console' command, however.)
set console "mkcobxs"


##### FILES AND DIRECTORIES #####

# the userfile: where user records are stored
set userfile "LamestBot.user"

# [0/1] do you want the userlist to be sorted when saving
set sort-users 0

# where the help files can be found (and there are plenty)
set help-path "help/"

# a good place to temporarily store files (ie: /tmp)
set temp-path "/tmp"

# the MOTD is displayed when people dcc chat to the bot.
# type '.help set motd' in DCC CHAT for tons of motd options.
set motd "motd"

# holds the banner displayed on telnet connections
set telnet-banner "telnet-banner"


##### BOTNET #####

# you probably shouldn't deal with this until reading 'botnet.doc' or
# something.  you need to know what you're doing.

# if you want to use a different nickname on the botnet than you use on
# IRC, set it here:
#set botnet-nick "LlamaBot"

# what telnet port should this bot answer?
# NOTE: if you are running more than one bot on the same machine, you will
#   want to space the telnet ports at LEAST 5 apart... 10 is even better
# if you would rather have one port for the botnet, and one for normal
#   users, you will want something like this instead:
#listen 3333 bots
#listen 4444 users
# NOTE: there are more options listed for the listen command in
#   doc/tcl-commands.doc
listen 3333 all

# [0/1] This setting will drop telnet connections not matching a known host
# It greatly improves protection from IRCOPs, but makes it impossible
# for NOIRC bots to add hosts or have NEW as a valid login
set protect-telnet 0

# [0/1] This setting will make the bot ignore DCC chat requests which appear to
# have bogus information on the grounds that the user may have been trying
# to make the bot connect to somewhere that will get it into trouble, or
# that the user has a broken client (like mIRC tends to do), in which case
# the connect wouldn't work anyway.  It's suggested that you turn this on.
set dcc-sanitycheck 0

# and a timeout value for ident lookups would help (seconds)
set ident-timeout 5

# [0/1] users with the +o (global or channel op) flag will still need the +p 
# (party line) flag to join the dcc chat party line?
set require-p 0

# [0/1] allow people to telnet in, type 'NEW', and become a new user?
# (If you set this to 1, you must set protect-telnet 0)
set open-telnets 0

# [0/1] Display 'Nickname.' instead of identifying ourselves when people
# telnet in. Set to 1 to only display Nickname.
# (useful if someone portscans your machine, they wont know we're here)
set stealth-telnets 0

# [0/1] Display a banner when people telnet in.
set use-telnet-banner 0

# how long (in seconds) should i wait for a connect (dcc chat, telnet,
# relay, etc) before it times out?
set connect-timeout 15

# number of messages / lines from a user on the partyline (dcc, telnet)  before
# they are considered to be flooding (and therefore get booted)
set dcc-flood-thr 3

# how many telnet connection attempt in how many seconds from the same
# host constitutes a flood?
set telnet-flood 5:60

# [0/1] apply telnet flood protection for everyone?
# set this to 0 if you want to exempt +f users from telnet flood protection
set paranoid-telnet-flood 1

# how long should I wait (seconds) before giving up on hostname/address
# lookup? (you might want to increase this if you are on a slow network).
set resolve-timeout 15


##### MORE ADVANCED STUFF #####

# are you behind a firewall?  uncomment this and specify your socks host
#set firewall "proxy:178"
# or, for a Sun "telnet passthru" firewall, set it this way
# (does anyone besides Sun use this?)
#set firewall "!sun-barr.ebay:3666"

# if you have a NAT firewall (your box has an IP in one of the following
# ranges: 192.168.0.0-192.168.255.255, 172.16.0.0-172.31.255.255,
# 10.0.0.0-10.255.255.255 and your firewall transparently changes your
# address to a unique address for your box.) or you have IP masquerading
# between you and the rest of the world, and /dcc chat,/ctcp chat or
# userfile shareing aren't working. Enter your outside IP here.
# Do not enter anything for my-ip or my-hostname.
#set nat-ip "127.0.0.1"

# if you want all dcc file transfers to use 1 particular listening port
# (this pretty much limits you to one concurrent file transfer at a time),
# either because you're behind a firewall, or for other security reasons,
# set it here
#set reserved-port 9076

# temporary ignores will last how many minutes?
set ignore-time 15

# this setting affects what part of the hour the 'hourly' calls occur
# on the bot, this includes such things as note notifying,
# You can change that here (for example, "15" means to
# notify every hour at 15 minutes past the hour)
# this now includes when the bot will save its userfile
set hourly-updates 00

# if compiled with owner, the following user(s) will ALWAYS have the
# owner (+n) flag (You really should change this default)
set owner "MrLame, MrsLame"

# who should I send a note to when I learn new users?
set notify-newusers "$owner"

# what flags should new users get as a default?
# check '.help whois' on the partyline (dcc chat, telnet) for tons of
# options.
set default-flags "hp"

# what user-defined fields should be displayed in a '.whois'?
# this will only be shown if the user has one of these xtra fields
# you might prefer to comment this out and use the userinfo1.0.tcl script
# which provides commands for changing all of these.
set whois-fields "url birthday"

# [0/1/2] allow people from other bots (in your bot-net) to boot people off
# your bot's party line?
# values:
#   0 - allow *no* outside boots
#   1 - allow boots from sharebots
#   2 - allow any boots
set remote-boots 2

# [0/1] if you don't want people to unlink your share bots from remote bots
# set this to 0
set share-unlinks 1

# [0/1] die on receiving a SIGHUP?
# (if 0, it'll rehash instead of dying)
set die-on-sighup 0

# [0/1] die on receiving a SIGTERM?
# (if 0, it'll save userfile instead of dying)
set die-on-sigterm 0

# to enable the 'tcl' and 'set' command (let owners directly execute
# Tcl commands)? - a security risk!!
# If you select your owners wisely, you should be okay enabling these.
# to enable, comment these two lines out
# (In previous versions, this was enabled by default in eggdrop.h)
unbind dcc n tcl *dcc:tcl
unbind dcc n set *dcc:set

# [0/1/2] only let permanent owners use .tcl/.set if bound? then set it to 1
# moreover only let permanent owners use .dump? then set it to 2
# (the people must set the $owner variable)
set must-be-owner 0

# comment the following line out to add the 'simul' command (owners can
# manipulate other people on the party line).
# Please select owners wisely! Use this command ethically!
unbind dcc n simul *dcc:simul

# maximum number of dcc connections you will allow - you can increase this
# later, but never decrease it, 50 seems to be enough for everybody
set max-dcc 50

# this setting is so that people can't send fake ports to your bot when
# they try to dcc it. irc clients should never use a port below 1024 and
# well 65535 is the highest port possible. this setting is used for telnet
# too.
set dcc-portrange 1024:65535

# [0/1] add the 'dccsimul' tcl command (needed by certain scripts like
# action.fix.tcl)
set enable-simul 1

# [0/1] allow +d & +k users to use commands bound as -|- ?
set allow-dk-cmds 1


# You MUST remove this line for this config file to work.  This has been
# added to prevent you from starting up a bot that is not fully configured.
# Bots that have not been fully configured may join the wrong IRC network,
# the wrong channels, or generally do things that you do not want.  Please
# make sure that you have double-checked the settings you want.
# There's also a similar line lower down, just to make sure you're reading :)

die "Please edit your config file."


########## MODULES ##########

# below are various settings for the modules available with eggdrop,
# PLEASE EDIT THEM CAREFULLY, READ THEM, even if you're an old hand
# at eggdrop, lots of things have changed slightly

# this is the directory to look for the modules in, if you run the
# bot in the compilation directories you will want to set this to ""
# if you use 'make install' (like all good kiddies do ;) this is a fine
# default, otherwise, use your head :)
set mod-path "modules/"


##### CHANNELS MODULE #####

# this next module provides channel related support for the bot, without
# it, it will just sit on irc, it can respond to msg & ctcp commands, but
# that's all
loadmodule channels

# the chanfile: where dynamic channel settings are stored
set chanfile "LamestBot.chan"

# temporary bans will last how many minutes? if set to 0, bot never removes
# them.
set ban-time 120

# temporary exemptions (+e modes) will last how many minutes? if set to 0,
# bot never removes them. This is an IRCNET feature. The bot will check the
# exempts every X minutes, but will not remove the exempt if a ban is set on
# the channel that matches that exempt. Once the ban is removed then the
# exempt will be removed the next time the bot checks.
set exempt-time 60

# temporary invitations (+I modes) will last how many minutes? if set to
# 0, bot never removes them. This is an IRCNET feature. The bot will check the
# invites every X minutes, but will not remove them if the channel is +i. Once
# the channel is -i then the bot will remove then invite mode next time it
# checks this counter
set invite-time 60

# [0/1] expire bans/exempts/invites set by other opped bots on the channel?
# set force-expire 0

# [0/1] share user greets with other bots on the channel if sharing user data?
set share-greet 0

# [0/1] allow users to store an info line?
set use-info 1

# these settings are used as default values when you
# .+chan #chan or .tcl channel add #chan
# look in the section above for explanation on every option

set global-flood-chan 10:60
set global-flood-deop 3:10
set global-flood-kick 3:10
set global-flood-join 5:60
set global-flood-ctcp 3:60

set global-idle-kick 0

set global-chanset {
        -clearbans      -enforcebans
        +dynamicbans    +userbans
        -autoop         -bitch
        +greet          +protectops
        +statuslog      +stopnethack
        -revenge        -secret
        -autovoice      +cycle
        +dontkickops    -wasoptest
        -inactive       -protectfriends
        +shared         -seen
    +userexempts    +dynamicexempts
    +userinvites    +dynamicinvites
}

set global-chanmode "nt"

# do this for each channel you wish to sit on:
# NOTE: for some reason Tcl won't let you put comments inside { } -- so
#   don't try it, cos it'll mess up your channel definition

channel add #lamest {
  chanmode "+nt-likm"
  idle-kick 0
  need-op { putserv "PRIVMSG #lamest :op me cos i'm lame!" }
  need-invite { putserv "PRIVMSG #lamest :let me in!" }
  need-key { putserv "PRIVMSG #lamest :let me in!" }
  need-unban { putserv "PRIVMSG #lamest :let me in!" }
  need-limit { putserv "PRIVMSG #lamest :let me in!" }
  flood-chan 10:60
  flood-deop 3:10
  flood-kick 3:10
  flood-join 5:60
  flood-ctcp 3:60
}

# the things inside the { } are CHANNEL OPTIONS -- they can be set within
# the "channel add" command, or by using a "channel set" command as in the
# examples below.  they list all the options you can set for a channel.

# chanmode
#   what modes will be enforced?  '+' modes will always be kept on, '-' modes
#   will always be kept off
# idle-kick
#   kick channel members after how many minutes of being idle?
#   (leave out to disable, or set to 0)
# need-op
#   script to run (if any) when the bot needs to be op'd on this channel
# need-invite
#   script to run (if any) when the bot gets locked out of the channel
#   because the channel is +i
# need-key
#   script to run (if any) when the bot gets locked out of the channel
#   because it doesn't have the channel key
# need-unban
#   script to run (if any) when the bot gets banned from this channel
# need-limit
#   script to run (if any) when the bot gets locked out of the channel
#   because the channel limit is full
# flood-chan (number:seconds)
#   how many channel messages in hom many seconds is a flood
#   not specifying or using number = 0 will not check chan floods!
# flood-ctcp (number:seconds)
#   how many channel messages in hom many seconds is a flood
#   not specifying or using number = 0 will not check ctcp floods!
# flood-deop (number:seconds)
#   how many deops in how many seconds is a mass de-op
#   not specifying or using number = 0 will not check de-op floods!
# flood-kick (number:seconds)
#   how many kicks in how many seconds is a mass kick?
#   not specifying or using number = 0 will not check mass kicks!
# flood-join (number:seconds)
#   how many joins/nick changes in how many seconds is a join flood?
#   not specifying or using number = 0 will not check join floods!

# note that "need-op", "need-invite", etc, are limited to 120 characters,
# so if you want to so something more complicated, just write a proc,
# and make them call your proc.

# there are also a lot of options that can be turned on or off for each
# channel.  to turn an option on, put a + in front of it.  to turn it off,
# put a - in front of it.  ie, to have auto-op, put:
#   +autoop
# to turn it off, put:
#   -autoop

#   clear all channel bans when the bot joins?  (ie, force the channel's
#   ban list to match the bot's internal list)
channel set #lamest -clearbans

#   when a ban is set, kick people who are on the channel and match the
#   new ban?  (ie, they were on the channel before the ban)
channel set #lamest +enforcebans

#   only activate bans on the channel when necessary?  (this keeps the
#   channel's ban list from getting excessively long.  the bot still remem-
#   bers every ban, but it only activates a ban on the channel when it sees
#   someone join who matches that ban.)
channel set #lamest +dynamicbans

#   allow bans to be made by users directly?  (if turned off, the bot will
#   require all bans to be made through the bot's console)
channel set #lamest +userbans

#   only activate exempts on the channel when necessary?  (this keeps the
#   channel's exempt list from getting excessively long.  the bot still
#   remembers every exempt, but it only activates a exempt on the channel
#   when it sees a ban set matching the exempt. The exempt remains active
#   on the channel for as long as the ban is still active.
channel set #lamest +dynamicexempts

#   allow exempts to be made by users directly?  (if turned off, the bot will
#   require all exempts to be made through the bot's console)
channel set #lamest +userexempts

#   only activate invites on the channel when necessary?  (this keeps the
#   channel's invite list from getting excessively long.  the bot still
#   remembers every invite, but the invites are only activated when the
#   channel is set to invite only and a user joins aftre requesting an
#   invite. Once set the invite remains until the channel goes to -i
channel set #lamest +dynamicinvites

#   allow invites to be made by users directly?  (if turned off, the bot will
#   require all invites to be made through the bot's console)
channel set #lamest +userinvites

#   op users with the +o (op) flag as soon as they join the channel?
#   (hint: this is a BAD IDEA)
channel set #lamest -autoop

#   only let users with +o (op) flag be channel ops?
channel set #lamest -bitch

#   say a user's info line when they join the channel?
channel set #lamest +greet

#   re-op a user with the +o (op) flag if they get deopped?
channel set #lamest +protectops

#   re-op a user with the +f (friend) flag if they get deopped?
channel set #lamest +protectfriends

#   log the channel status line every 5 minutes? (some people think
#   it's annoying; i think it's neat)
channel set #lamest +statuslog

#   de-op someone that enters the channel with server ops (ie, netsplit
#   ops) when they didn't have them before the split?
channel set #lamest +stopnethack

#   remember people who deop/kick/ban the bot or valid ops, and punish them?
#   users with +f (friend) flag are exempt from revenge
channel set #lamest +revenge

#   voice users with +v (voice) flag when they join the channel?
channel set #lamest +autovoice

#   prevent this channel from being listed on the botnet?  (for paranoid
#   people)
channel set #lamest -secret

#   share user channel info for this channel?
channel set #lamest -shared

#   cycle the channel when it becomes op-less?
channel set #lamest +cycle

#   do you want the bot not to be able to kick +o flag users ?
#   letting them kick-flood for instance, to protect the channel agaisnt
#   clone attacks
channel set #lamest +dontkickops

#   during net-rejoins does a wasop test for +stopnethack (same as +w user
#   flag, but affects a whole channel)
channel set #lamest -wasoptest

#   prevents the bot from joining the channel (or makes it leave the channel
#   if it is already there).
#   Can be useful to make the bot leave a channel without loosing it's
#   settings (flood settings, all these "channel set" settings), user flags
#   for this channel, bans for this channel, and without affecting any
#   sharing
channel set #lamest -inactive

#   respond to seen requests in the channel?  (seen module must be loaded)
channel set #lamest -seen

# here's a shorter example:
channel add #botcentral {
  chanmode "+mntisl 1"
  idle-kick 1
}
channel set #botcentral +bitch +clearbans +enforcebans -greet +revenge


##### SERVER MODULE #####

# this provides the core server support (removing this is equivalent to
# the old NO_IRC define)
loadmodule server

# [0/1/2/3/4/5] What is your network?
# 0 = Efnet (non +e/+I hybrid), 1 = IRCnet, 2 = Undernet, 3 = Dalnet,
# 4 = Efnet +e/+I hybrid, 5 = Others
set net-type 0

##### variables:
# the nick of the bot, that which it uses on IRC, and on the botnet
# unless you specify a sperate botnet-nick
set nick "Lamestbot"

# an alternative nick to use if the nick specified by 'set nick' is
# unavailable. All '?' characters will be replaced by a random number.
set altnick "Llamabot"

# what to display in the real-name field for the bot
set realname "/msg LamestBot hello"

# script to run (if any) when first connecting to a server
set init-server { putserv "MODE $botnick +i-ws" }

# the server list -- the bot will start at the first server listed, and cycle
# through them whenever it's disconnected
# (please note: you need to change these servers to YOUR network's servers)
set servers {
  you.need.to.change.this:6667
}

# [0/1] if the bot's nickname is changed (for example, if the intended
# nickname is already in use) keep trying to get the nick back?
set keep-nick 1

# [0/1] use /ison instead of /trace to see if our botnick is free or being
# used? (note: some irc admins, look for excessive use of /trace)
set use-ison 1

# [0/1] if this is set, a leading '~' on user@hosts WON'T be stripped off
set strict-host 0

# [0/1] Squelch the error message when rejecting a DCC CHAT or SEND?
# Normally it tells the DCC user that the CHAT or SEND has been rejected
# because they don't have access, but sometimes IRC server operators
# detect bots that way.
set quiet-reject 1

# [0/1] answer lower case ctcp's (non rfc compliant)
# mIRC will do this, most other clients will NOT
set lowercase-ctcp 0

# answer HOW MANY stacked ctcp's at once
set answer-ctcp 3

# setting any of the following with howmany == 0 will turn them off
# how many msgs in how many seconds from the same host constitutes a flood?
set flood-msg 5:60
# how many CTCPs in how many seconds?
set flood-ctcp 3:60

# [0/1] even if all the servers are down, cycle forever and keep trying to
# connect?
set never-give-up 1

# [0/1] If this setting is 0 then the eggdrop keeps a seperate list of the names
# irc servers call themselves, retaining what you entered in the config file.
# setting it to 1 will cause the bot to replace your entry with what
# the server actually calls itself
set strict-servernames 0

# if no port is specified on a .jump, which port should I use?
set default-port 6667

# number of seconds to wait between each server connect (0 = no wait)
# useful for preventing ircu throttling
# setting this too low could make your server admins *very* unhappy
set server-cycle-wait 60

# how many seconds to wait for a response when connecting to a server
# before giving up and moving on?
set server-timeout 15

# if the number of servers on the net gets below this number, it will
# jump to a new server (ie, it will assume it's on the losing end of a
# netsplit) -- set to 0 to turn off
# [most irc networks use TS now, so it's to your advantage to turn this off]
set servlimit 0

# [0/1] check for stoned servers? (i.e. Where the server connection has
# died, but eggdrop hasn't been notified yet).
set check-stoned 1

# [0/1] enable console mode 'r'?  this mode shows every raw message from the
# server to owners with console 'r' selected -- will take a bit more
# cpu.
# NOTE: This is a large security hole, allowing people to see mis-sent
#       messages to the bot containing passwords
# This is now restricted to +n users only. Please choose your owners with care.
set use-console-r 0

# [0/1] enable logging of all information sent *to* a server, via console mode 'v'
# NOTE: This is a large security hole, allowing people to see passwords.
# This is now restricted to +n users only. Please choose your owners with care.
set debug-output 0

# [0/1] exit if the server sends a ERROR message?
set serverror-quit 1

# maximum number of lines to queue to the server.
# if you're going to dump large chunks of text to people over irc,  you
# will probably want to raise this -- most people are fine at 300 though
set max-queue-msg 300

# [0/1] trigger bindings for ignored users?
set trigger-on-ignore 0

# [0/1] allow a msg being twice in a queue?
set double-mode 0
set double-server 0
set double-help 0

##### SERVER MODULE - net-type 5 specific features (other networks) #####

# [0/1] some IRC Networks use the ircdu's SILENCE command
# else it is useless to use this
# Automatically set to 0 for net-type 0/1/3/4, set to 1 for net-type 2.
# Only use this if you set net-type 5
#set use-silence 1

# [0/1] some nets use umode +r to mean a restricted connection. If this is your
# case, and you want your bot to leave restricted servers and jump to the
# next one on his server list, then set it to 1.
# Automatically set to 0 for net-type 0/2/3/4, set to 1 for net-type 1.
# Only use this if you set net-type 5
#set check-mode-r 1


##### CTCP MODULE #####

# this provides the normal ctcp replies that you'd expect *RECOMMENDED*
loadmodule ctcp

# several variables exist to better blend your egg in.  they are
# ctcp-version, ctcp-finger, and ctcp-userinfo.  you can use set
# to set them to values you like.

# [0/1/2] 0: normal behavior. 1: bot ignores all CTCPs, except for CTCP
# CHATs & PINGs requested by +o flag users. 2: bot doesn't answer more
# than C CTCPs in S seconds. C/S are defined by the set flood-ctcp C:S (cf
# server module)
set ctcp-mode 0


##### IRC MODULE #####

# this module provides ALL NORMAL IRC INTERACTION, if you want the normal
# join & maintain channels stuff, this is the module.
loadmodule irc

# [0/1] define this if you want to bounce all server bans
set bounce-bans 1

# [0/1] define this if you want to bounce all the server modes
set bounce-modes 0

# If there are more than max-bans active bans on a channel, then the
# bot won't try to put more bans. Thus it won't flood the irc server.
# ircd 2.9.5 allows 20 bans. ircd 2.10 allows 30 bans (max).
set max-bans 20

# There is a global limit for +b/+e/+I modes. This limit is set to 30 on
# 2.10 irc servers.
set max-modes 30

# [0/1] define this to allow modes from non-op users (ChanServ)
# or if you use services like X/W to avoid fake op messages
set allow-desync 0

# [0/1] Do you want the bot to kick for control character/ctcp avalanches
# to a channel?
# Remember that if it does, as it won't ban them, it can be at the origin
# of a nice kick-flood
set kick-fun 0

# [0/1] Do you want the bot to ban for control character/ctcp avalanches
# to a channel?
# Can prevent the above described kick-flood, but can also fill the banlist
set ban-fun 0

# [0/1] let users introduce themselves to the bot via 'hello'?
set learn-users 0

# time (in seconds) to wait for someone to return from a netsplit
set wait-split 600

# time (in seconds) that someone must have been off-channel before
# re-displaying their info
set wait-info 180

# this is the maximum number of bytes to send in the arguments to mode's
# sent to the server, most servers default this to 200, so it should
# be sufficient
set mode-buf-length 200

# many irc ops check for bots that respond to 'hello'.  you can change this
# to another word by uncommenting the following two lines, and changing
# "myword" to the word you want to use instead of 'hello' (it must be a
# single word)
# novice users are not expected to understand what these two lines do; they
# are just here to help you.  for more information on 'bind', check the file
# 'tcl-commands.doc'
#unbind msg - hello *msg:hello
#bind msg - myword *msg:hello

# Many takeover attempts occur due to lame users blindy /msg ident'n to
# the bot without checking if the bot is the bot.
# We now unbind this command by default to discourage them
unbind msg - ident *msg:ident
unbind msg - addhost *msg:addhost

# If you or your users use many different hosts and wants to
# be able to add it by /msg'ing you need to remove the
# unbind ident line above or bind it to another word.
#bind msg - myidentword *msg:ident

# [0/1] If you are so lame you want the bot to display peoples info lines, even
# when you are too lazy to add their chanrecs to a channel, set this to 1
# *NOTE* This means *every* user with an info line will have their info
# display on EVERY channel they join (provided they have been gone longer than
# wait-info)
set no-chanrec-info 0

# [0/1/2/3] Defines how the bot should punish bad users when revenging.
# 0 for deop - 1 for deop and +d - 2 for deop, +d and kick - 3 for deop,
# chattr +d, kick and ban. Default is 1.
set revenge-mode 1

##### IRC MODULE - net-type 1 specific features (IRCnet) #####

# Don't modify the following settings if you don't use IRCnet. The defaults following
# values are harmless for you.

# [0/1] define this if you want to bounce all server exemptions (+e modes)
#  * This is an IRCNET feature
set bounce-exempts 0

# [0/1] define this if you want to bounce all server invitations (+I modes)
#  * This is an IRCNET feature
set bounce-invites 0

# If there are more than max-exempts active +e modes on a channel, then
# the bot won't try to put more exemptions. Thus it won't flood the irc
# server. Only 2.10 servers are concerned by these +e modes.
#  * This is an IRCNET feature
set max-exempts 20

# If there are more than max-invites active +I modes on a channel, then
# the bot won't try to put more invitations. Thus it won't flood the irc
# server. Only 2.10 irc servers are concerned by these +I modes.
#  * This is an IRCNET feature
set max-invites 20

# The following lines should be left uncommented unless the default values
# are being over-ridden. By default exempts and invites are on for IRCnet
# and hybrid EFnet, but off for all other networks. This behaviour can be
# modified by the following 2 flags. If you're network doesn't support e/I
# modes then you'll be unable to use these features.
#
# [0/1] Do you want to enable exempts?
# set use-exempts 0

# [0/1] Do you want to use invites?
# set use-invites 0

# [0/1] Prevent mixing normal modes and +I/+e invite modes?
# At the moment (Sep/1999), IRCnet servers do not allow mixing those modes,
# so leave this flag set to 1. The servers will probably change their
# behaviour in the future, so you should first check before accepting the
# default.
set prevent-mixing 1

##### IRC MODULE - net-type 5 specific features (other networks) #####

# kick-method defines how kicks (when enforcing bans) should be made:
#    0 = kick all nicks at once in one command
#    X = kick X users at a time
#
# Automatically set by net-type:
#  net-type 0, 2, 3 & 4 sets this to 1
#  net-type 1 sets this to 4
#
# If you use net-type 5, you must set this yourself (default is 1)
#set kick-method 1

# some networks allow you to stack lots of channel modes into one
# line.
# they're all guaranteed to support at least 3, so that's the default,
# but if you know your network supports more, you may want to adjust
# this value. this value must be less than or equal to 6.
# Automatically set to 4 for net-type 0/4, set to 3 for net-type 1, set to
# 6 for net-type 2/3.
# Only use this if you set net-type 5
#set modes-per-line 3

# [0/1] use ircu2.10.01 specific /who requests, therefore only asking for
# exactly what's needed
# Automatically set to 0 for net-type 0/1/3/4, set to 1 for net-type 2.
# Only use this if you set net-type 5
#set use-354 0

# [0/1] use rfc 1459 compliant string matching routines?
# All networks apart from Dalnet comply with rfc 1459, so you should only
# disable it on Dalnet or networks which use Dalnet's code.
#set rfc-compliant 1


##### TRANSFER MODULE #####

# uncomment this line to load the transfer module, this provides
# dcc send/get support and bot userfile transfer support (not sharing)
#loadmodule transfer

##### variables:
# set maximum number of simultaneous downloads to allow for each user
set max-dloads 3

# set the block size for dcc transfers (ircII uses 512 bytes, but admits
# that may be too small -- 1024 is standard these days)
# set this to 0 to use turbo-dcc (recommended)
set dcc-block 1024

# [0/1] copy files into the /tmp directory before sending them?  this is
# useful on most systems for file stability.  (someone could move a file
# around while it's being downloaded, and mess up the transfer.)  but if
# your directories are NFS mounted, it's a pain, and you'll want to set
# this to 0. If you are low on disk space, you may want to set this to 0.
set copy-to-tmp 1

# time (in seconds) that a dcc file transfer can remain inactive
# before being timed out
set xfer-timeout 30


##### SHARE MODULE #####

# this provides the userfile sharing support
# (this requires the channels & transfer modules)
#loadmodule share

##### variables:
# [0/1] When two bots get disconnected this flag allows them to create
# a resync buffer which saves all changes done to the userfile during
# the disconnect. So, when they reconnect, they will not have to transfer
# the complete user file, but instead, just send the resync buffer.
# If you have problems with this feature please tell us. Take a look at
# doc/BUG-REPORT first though.
#set allow-resync 0

# this specifies how long to hold another bots resync data for before
# flushing it
#set resync-time 900

# [0/1] when sharing user lists, ignore +n modes from other bots?
#
# PLEASE NOTE!
#
# With the addition of private-globals, private-owner is now redundant,
# and therefore deprecated.  It may be removed soon.  Put the global
# owner flag in private-globals for the same effect.
#
# NOTE: every slave will need to have 'set owner ...' or
# they will lose their owners when they download the user list
#set private-owner 0

# [0/1] when sharing user lists, DONT ACCEPT global flag changes from other bots?
# NOTE: the bot will still send changes made on the bot, it just wont accept
# any global flag changes from other bots
#set private-global 0

# when sharing user lists, if private-global isn't set, which global flag
# changes from other bots should be ignored ?
#set private-globals "mnot"

# [0/1] when sharing user lists, DON'T ACCEPT any userfile changes from other
# bots?
# NOTE: paranoid people should use this feature on their hub bot - this
# will force all +host/+user/chpass/etc. changes to be made via the hub
#set private-user 0


##### FILESYSTEM MODULE #####

# uncomment this line to load the file system module, this provides
# an area withing the bot where you can store files
#loadmodule filesys

# this is the 'root' directory for the file system (set it to "" if you
# don't want a file system)
set files-path "/home/mydir/filesys"

# if you want to allow uploads, set this to the directory uploads should be
# put into
set incoming-path "/home/mydir/filesys/incoming"

# [0/1] alternately, you can set this, and uploads will go to the current
# directory that a user is in
set upload-to-pwd 0

# eggdrop creates a '.filedb' file in each subdirectory of your dcc area,
# to keep track of its own file system info -- if you can't do that (like
# if the dcc path isn't owned by yours) or you just don't want it to do
# that, specify a path here where you'd like all the database files to
# be stored instead (otherwise, just leave it blank)
set filedb-path ""

# set maximum number of people that can be in the file area at once
# (0 to make it effectively infinite)
set max-file-users 20

# maximum allowable file size that will be received, in K
# (default is 1024K = 1M)
set max-filesize 1024


##### NOTES MODULE #####

# this provides support for storing of notes for users from each other
# notes between currently online users is supported in the core, this is
# only for storing the notes for later retrieval, direct user->user notes
# are built-in
loadmodule notes

# the notefile: where private notes between users are stored
set notefile "LamestBot.notes"

# maximum number of notes to allow to be stored for each user
# (to prevent flooding)
set max-notes 50

# time (in days) to let stored notes live before expiring them
set note-life 60

# [0/1] allow users to specify a forwarding address for forwarding notes
# to another bot
set allow-fwd 0

# [0/1] set this to 1 if you want the bot to let people know hourly if they
# have any notes
set notify-users 1

# [0/1] set this to 1 if you want the bot to let people know on join if they
# have any notes
set notify-onjoin 1

# comment out this next line, otherwise your bot won't start
die "You didn't edit your config file like you were told, did you?"


##### CONSOLE MODULE #####

# this module provides storage of console settings when you exit the bot
# (or .store)
loadmodule console

##### variables:
# [0/1] save users console settings automatically? (otherwise they have to use
# .store)
set console-autosave 1

# [0-99999] if a user doesn't have any console settings saved, which channel
# do you want them automatically put on?
set force-channel 0

# [0/1] display a user's global info line when they join a botnet channel?
set info-party 0


##### WOOBIE MODULE #####

# this serves absolutely no purpose and is for demonstrative
# purposes only
#loadmodule woobie


##### SEEN MODULE #####

# this module provides seen commands via msg, on channel or via
# dcc, similar to the various scripts
#loadmodule seen


##### BLOWFISH MODULE #####

##### IF YOU DONT READ THIS YOU MAY RENDER YOUR USERFILE USELESS LATER

# Choose your encryption method now, 'cause once you do, it ain't
# changing 'til you get a new userfile, capish?  At the moment, there
# is only one encryption option: blowfish

# uncomment this line to load blowfish, the encryption module
# for the bot, it will not start without it loaded and commented out
# to make sure you read the whole config file
# this is checkmodule, because during .restart the module will already
# be loaded
#checkmodule blowfish


##### ASSOC MODULE #####

# uncomment this line to load assoc support, i.e naming channels on
# the botnet
#loadmodule assoc


##### WIRE MODULE #####

# this module provides all the standard .wire commands via dcc.
# it's an encrypted partyline communication tool, compatible with wire.tcl
# uncomment this line to load it
#loadmodule wire


##### SCRIPTS #####

# these are some commonly loaded (and needed) scripts.
source scripts/alltools.tcl
source scripts/action.fix.tcl

# This script provides many useful minor informational commands
# (like setting users url's, email address, etc). You can modify
# it to add extra entries, you might also want to modify help/userinfo.help
# and help/msg/userinfo.help to change the help files.
source scripts/userinfo1.0.tcl
loadhelp userinfo.help
webmaster@eggheads.org	ViewVC Help
Powered by ViewVC 1.1.23