viewvc/eggdrop1.4/Makefile.in

#
#  This is the Makefile for EGGDROP (the irc bot)
#  You should never need to edit this.
#

SHELL = /bin/sh

prefix = @prefix@
DEST = @DEST@
EGGEXEC = @EGGEXEC@
EGGVERSION = @EGGVERSION@

# things you can put here:
#   -Wall            if you're using gcc and it supports it (configure
#                      usually detects this anyway now)
#   -DEBUG_MEM       to be able to debug memory allocation (.debug)
# this can now be set by using 'make debugmem'
CFLGS =

# configure SHOULD set these...you may need to tweak them to get modules
# to compile .. if you do...let the devel-team know the working settings
# btw to turn STRIP off, do 'STRIP = touch' not 'STRIP ='

# defaults
CC = @CC@
LD = @CC@
STRIP = @STRIP@
RANLIB = @RANLIB@

# make eggmod
MOD_CC = @MOD_CC@
MOD_LD = @MOD_LD@
MOD_STRIP = @MOD_STRIP@

# make modules
SHLIB_CC = @SHLIB_CC@
SHLIB_LD = @SHLIB_LD@
SHLIB_STRIP = @SHLIB_STRIP@

# programs make install uses
LN_S = @LN_S@
INSTALL = @INSTALL@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_SCRIPT = @INSTALL_SCRIPT@

# STOP STOP STOP STOP STOP STOP STOP STOP STOP STOP STOP STOP STOP STOP #
# - - - - - - - - do not edit anything below this line. - - - - - - - - #
# - - - - - - - - -  it's all done by configure now.  - - - - - - - - - #
# STOP STOP STOP STOP STOP STOP STOP STOP STOP STOP STOP STOP STOP STOP #

# stuff for Tcl
XREQ = @TCL_REQS@
TCLLIB = @TCLLIB@

CFLAGS = @CFLAGS@ -I.. @DEFS@ $(CFLGS)
@SET_MAKE@

MAKE_STATIC = $(MAKE) 'CC=$(CC)' 'LD=$(LD)' 'STRIP=$(STRIP)' \
'RANLIB=$(RANLIB)' 'CFLAGS=$(CFLAGS) -DSTATIC' 'CPPFLAGS=$(CPPFLAGS)' \
'EGGEXEC=$(EGGEXEC)' 'TCLLIB=$(TCLLIB)' \
'XREQ=$(XREQ)' 'XLIBS=@TCL_LIBS@ @LIBS@'

MAKE_MODEGG = $(MAKE) 'CC=$(MOD_CC)' 'LD=$(MOD_LD)' 'STRIP=$(MOD_STRIP)' \
'RANLIB=$(RANLIB)' 'CFLAGS=$(CFLAGS)' 'CPPFLAGS=$(CPPFLAGS)' \
'EGGEXEC=$(EGGEXEC)' 'TCLLIB=$(TCLLIB)' \
'XREQ=$(XREQ)' 'XLIBS=@TCL_LIBS@ @LIBS@'

MAKE_MODULES = $(MAKE) 'CC=$(SHLIB_CC)' 'LD=$(SHLIB_LD)' \
'STRIP=$(SHLIB_STRIP)' 'CFLAGS=$(CFLAGS)' 'CPPFLAGS=$(CPPFLAGS)'

MAKE_SDEBUG = $(MAKE) 'CC=$(CC)' 'LD=$(LD)' 'STRIP=touch' \
'RANLIB=$(RANLIB)' 'CFLAGS=-g3 $(CFLAGS) -DSTATIC -DEBUG_MEM' \
'CPPFLAGS=$(CPPFLAGS)' 'EGGEXEC=$(EGGEXEC)' 'TCLLIB=$(TCLLIB)' \
'XREQ=$(XREQ)' 'XLIBS=@TCL_LIBS@ @LIBS@'

MAKE_MEMEGG = $(MAKE) 'CC=$(MOD_CC)' 'LD=$(MOD_LD)' 'STRIP=touch' \
'RANLIB=$(RANLIB)' 'CFLAGS=-g3 $(CFLAGS) -DEBUG_MEM' \
'CPPFLAGS=$(CPPFLAGS)' 'EGGEXEC=$(EGGEXEC)' 'TCLLIB=$(TCLLIB)' \
'XREQ=$(XREQ)' 'XLIBS=@TCL_LIBS@ @LIBS@'

MAKE_DEBMODULES = $(MAKE) 'CC=$(SHLIB_CC)' 'LD=$(SHLIB_LD)' \
'STRIP=touch' 'CFLAGS=-g3 $(CFLAGS) -DEBUG_MEM' 'CPPFLAGS=$(CPPFLAGS)'

MAKE_INSTALL = $(MAKE) 'DEST=$(DEST)'

all: @DEFAULT_MAKE@

clean:
    @rm -f $(EGGEXEC) *.so *.stamp core DEBUG *~
    @cd doc; $(MAKE) clean
    @cd scripts; $(MAKE) clean
    @cd src; $(MAKE) clean
    @cd src/md5; $(MAKE) clean
    @cd src/mod; $(MAKE) clean

distclean: clean
    @rm -f Makefile doc/Makefile scripts/Makefile src/Makefile src/md5/Makefile src/mod/Makefile
    @rm -f config.cache config.log config.status config.h lush.h

distrib: distclean
    @rm -f `find . \( -name '*~' -o -name '*#' -o -name '*.orig' \
        -o -name '*.rej' -o -name '*.bak' \) -print`
    @rm -rf `find . \( -name "CVS" \) -print`
    @(echo "all:"; \
    echo "  @echo \"\""; \
    echo "  @echo \"Before you can compile your bot you have to configure it.\""; \
    echo "  @echo \"So please start the configure script now:\""; \
    echo "  @echo \"\""; \
    echo "  @echo \" % ./configure\""; \
    echo "  @echo \"\""; ) > Makefile

eggdrop: modegg modules

modegg: modtest
    @cd src; $(MAKE_MODEGG) modegg
    @echo ""
    @./$(EGGEXEC) -v
    @ls -l $(EGGEXEC)

modules: modtest
    @cd src/mod; $(MAKE_MODULES) modules
    @echo ""
    @echo "modules made:"
    @ls -l *.so

static: eggtest
    @echo ""
    @echo "Making module objects for static linking..."
    @echo ""
    @cd src/mod; $(MAKE_STATIC) static
    @echo ""
    @echo "Making core eggdrop for static linking..."
    @echo ""
    @cd src; $(MAKE_STATIC) static
    @echo ""
    @./$(EGGEXEC) -v
    @ls -l $(EGGEXEC)

debugmem: memegg debmodules

memegg: modtest
    @cd src; $(MAKE_MEMEGG) memegg
    @echo ""
    @./$(EGGEXEC) -v
    @ls -l $(EGGEXEC)

debmodules: modtest
    @cd src/mod; $(MAKE_DEBMODULES) modules
    @echo ""
    @echo "modules made:"
    @ls -l *.so

sdebug: eggtest
    @echo ""
    @echo "Making module objects for static linking..."
    @echo ""
    @cd src/mod; $(MAKE_SDEBUG) static
    @echo ""
    @echo "Making core eggdrop for static linking..."
    @echo ""
    @cd src; $(MAKE_SDEBUG) sdebug
    @echo ""
    @./$(EGGEXEC) -v
    @ls -l $(EGGEXEC)

eggtest:
    @if [ -f EGGMOD.stamp ]; then \
        echo "You're trying to do a STATIC build of eggdrop when you've";\
        echo "already run 'make' for a module build.";\
        echo "You must first type \"make clean\" before you can build";\
        echo "a static version.";\
        exit 1;\
    fi
    @echo "stamp" >EGGDROP.stamp

modtest:
    @if [ -f EGGDROP.stamp ]; then \
        echo "You're trying to do a MODULE build of eggdrop when you've";\
        echo "already run 'make' for a static build.";\
        echo "You must first type \"make clean\" before you can build";\
        echo "a module version.";\
        exit 1;\
    fi
    @echo "stamp" >EGGMOD.stamp

install: ainstall

dinstall: eggdrop ainstall

sinstall: static ainstall

ainstall: install-start install-bin install-modules install-data \
install-help install-language install-filesys install-doc \
install-scripts install-end

install-start:
    @if test ! -f $(EGGEXEC); then \
        echo ""; \
        echo "You haven't compiled eggdrop yet."; \
        echo "To compile eggdrop use:"; \
        echo "  make <target>"; \
        echo ""; \
        echo "  valid targets: eggdrop static debug sdebug"; \
        echo ""; \
        exit 1; \
    fi
    @if test "x$(DEST)" = "x"; then \
        echo "You must specify a destination directory with DEST="; \
        exit 1; \
    fi
    @echo ""
    @./$(EGGEXEC) -v
    @echo
    @echo "Installing in directory: '$(DEST)'."
    @echo
    @if test ! -d $(DEST); then \
        echo "Creating directory: $(DEST)."; \
        $(INSTALL) -d $(DEST); \
    fi

install-bin:
    @if test -f $(DEST)/$(EGGEXEC); then \
        rm -f $(DEST)/o$(EGGEXEC); \
    fi
    @if test -h $(DEST)/$(EGGEXEC); then \
        echo "Removing symlink to archival eggdrop binary."; \
        rm -f $(DEST)/$(EGGEXEC); \
    fi
    @if test -f $(DEST)/$(EGGEXEC); then \
        echo "Renamed the old '$(EGGEXEC)' executable to 'o$(EGGEXEC)'."; \
        mv -f $(DEST)/$(EGGEXEC) $(DEST)/o$(EGGEXEC); \
    fi
    @echo "Copying new '$(EGGEXEC)' executable and creating symlink."
    @$(INSTALL_PROGRAM) $(EGGEXEC) $(DEST)/$(EGGEXEC)-$(EGGVERSION)
    @(cd $(DEST) && $(LN_S) $(EGGEXEC)-$(EGGVERSION) $(EGGEXEC))

install-modules:
    @if test -h $(DEST)/modules; then \
        echo "Removing symlink to archival modules directory."; \
        rm -f $(DEST)/modules; \
    fi
    @if test -d $(DEST)/modules; then \
        echo "Moving old modules into 'modules.old' directory."; \
        rm -rf $(DEST)/modules.old; \
        mv -f $(DEST)/modules $(DEST)/modules.old; \
    fi
    @if test ! "x`echo *.so`" = "x*.so"; then \
        if test ! -d $(DEST)/modules-$(EGGVERSION); then \
            echo "Creating modules-$(EGGVERSION) directory and symlink."; \
            $(INSTALL) -d $(DEST)/modules-$(EGGVERSION); \
        fi; \
        (cd $(DEST) && $(LN_S) modules-$(EGGVERSION) modules); \
        echo "Copying new modules."; \
        for i in *.so; do \
            $(INSTALL_PROGRAM) $$i $(DEST)/modules-$(EGGVERSION)/; \
        done; \
    fi

install-data:
    @$(INSTALL_DATA) eggdrop.conf.dist $(DEST)
    @if test ! -f $(DEST)/motd; then \
        $(INSTALL_DATA) motd $(DEST); \
    fi
    @if test ! -f $(DEST)/telnet-banner; then \
        $(INSTALL_DATA) telnet-banner $(DEST); \
    fi

install-help:
    @echo "Copying help files."
    @if test ! "x`echo help/*.help`" = "xhelp/*.help"; then \
        if test ! -d $(DEST)/help; then \
            echo "Creating 'help' subdirectory."; \
            $(INSTALL) -d $(DEST)/help; \
        fi; \
        for i in help/*.help; do \
            $(INSTALL_DATA) $$i $(DEST)/help/; \
        done; \
    fi
    @if test ! "x`echo help/msg/*.help`" = "xhelp/msg/*.help"; then \
        if test ! -d $(DEST)/help/msg; then \
            echo "Creating 'help/msg' subdirectory."; \
            $(INSTALL) -d $(DEST)/help/msg; \
        fi; \
        for i in help/msg/*.help; do \
            $(INSTALL_DATA) $$i $(DEST)/help/msg/; \
        done; \
    fi
    @if test ! "x`echo help/set/*.help`" = "xhelp/set/*.help"; then \
        if test ! -d $(DEST)/help/set; then \
            echo "Creating 'help/set' subdirectory."; \
            $(INSTALL) -d $(DEST)/help/set; \
        fi; \
        for i in help/set/*.help; do \
            $(INSTALL_DATA) $$i $(DEST)/help/set/; \
        done; \
    fi
    @cd src/mod/; $(MAKE_INSTALL) install-help

install-language:
    @echo "Copying language files."
    @if test ! "x`echo language/*.lang`" = "xlanguage/*.lang"; then \
        if test ! -d $(DEST)/language; then \
            echo "Creating 'language' subdirectory."; \
            $(INSTALL) -d $(DEST)/language; \
        fi; \
        for i in language/*.lang; do \
            $(INSTALL_DATA) $$i $(DEST)/language/; \
        done; \
    fi
    @cd src/mod/; $(MAKE_INSTALL) install-language

install-filesys:
    @if test ! -d $(DEST)/filesys; then \
        echo "Creating a skeletal filesys subdirectory."; \
        $(INSTALL) -d $(DEST)/filesys; \
        $(INSTALL) -d $(DEST)/filesys/incoming; \
    fi

install-doc:
    @$(INSTALL_DATA) README $(DEST)
    @cd doc/; $(MAKE_INSTALL) install

install-scripts:
    @cd scripts/; $(MAKE_INSTALL) install

install-end:
    @echo
    @echo "Installation completed."
    @echo ""
    @echo "You MUST ensure that you edit/verify your configuration file."
    @echo "'eggdrop.conf.dist' lists current options."
    @echo ""
    @echo "Remember to change directory to $(DEST) before you proceed."
    @echo ""

#safety hash
1	segfault	1.1	#
2			# This is the Makefile for EGGDROP (the irc bot)
3			# You should never need to edit this.
4			#
5
6	arthur2	1.17	SHELL = /bin/sh
7
8	segfault	1.1	prefix = @prefix@
9	guppy	1.15	DEST = @DEST@
10	arthur2	1.17	EGGEXEC = @EGGEXEC@
11	guppy	1.20	EGGVERSION = @EGGVERSION@
12	segfault	1.1
13			# things you can put here:
14			# -Wall if you're using gcc and it supports it (configure
15			# usually detects this anyway now)
16			# -DEBUG_MEM to be able to debug memory allocation (.debug)
17			# this can now be set by using 'make debugmem'
18	guppy	1.14	CFLGS =
19	segfault	1.1
20			# configure SHOULD set these...you may need to tweak them to get modules
21			# to compile .. if you do...let the devel-team know the working settings
22	guppy	1.15	# btw to turn STRIP off, do 'STRIP = touch' not 'STRIP ='
23	segfault	1.1
24	arthur2	1.17	# defaults
25	guppy	1.15	CC = @CC@
26			LD = @CC@
27	arthur2	1.17	STRIP = @STRIP@
28			RANLIB = @RANLIB@
29	segfault	1.1
30	arthur2	1.17	# make eggmod
31			MOD_CC = @MOD_CC@
32			MOD_LD = @MOD_LD@
33			MOD_STRIP = @MOD_STRIP@
34	segfault	1.1
35	arthur2	1.17	# make modules
36	segfault	1.1	SHLIB_CC = @SHLIB_CC@
37	guppy	1.15	SHLIB_LD = @SHLIB_LD@
38	segfault	1.1	SHLIB_STRIP = @SHLIB_STRIP@
39
40	arthur2	1.17	# programs make install uses
41	guppy	1.15	LN_S = @LN_S@
42	arthur2	1.17	INSTALL = @INSTALL@
43			INSTALL_PROGRAM = @INSTALL_PROGRAM@
44			INSTALL_DATA = @INSTALL_DATA@
45			INSTALL_SCRIPT = @INSTALL_SCRIPT@
46	segfault	1.1
47			# STOP STOP STOP STOP STOP STOP STOP STOP STOP STOP STOP STOP STOP STOP #
48			# - - - - - - - - do not edit anything below this line. - - - - - - - - #
49			# - - - - - - - - - it's all done by configure now. - - - - - - - - - #
50			# STOP STOP STOP STOP STOP STOP STOP STOP STOP STOP STOP STOP STOP STOP #
51
52			# stuff for Tcl
53			XREQ = @TCL_REQS@
54			TCLLIB = @TCLLIB@
55	arthur2	1.17
56			CFLAGS = @CFLAGS@ -I.. @DEFS@ $(CFLGS)
57	segfault	1.1	@SET_MAKE@
58
59	arthur2	1.17	MAKE_STATIC = $(MAKE) 'CC=$(CC)' 'LD=$(LD)' 'STRIP=$(STRIP)' \
60	guppy	1.21	'RANLIB=$(RANLIB)' 'CFLAGS=$(CFLAGS) -DSTATIC' 'CPPFLAGS=$(CPPFLAGS)' \
61	arthur2	1.17	'EGGEXEC=$(EGGEXEC)' 'TCLLIB=$(TCLLIB)' \
62			'XREQ=$(XREQ)' 'XLIBS=@TCL_LIBS@ @LIBS@'
63
64			MAKE_MODEGG = $(MAKE) 'CC=$(MOD_CC)' 'LD=$(MOD_LD)' 'STRIP=$(MOD_STRIP)' \
65	guppy	1.21	'RANLIB=$(RANLIB)' 'CFLAGS=$(CFLAGS)' 'CPPFLAGS=$(CPPFLAGS)' \
66	arthur2	1.17	'EGGEXEC=$(EGGEXEC)' 'TCLLIB=$(TCLLIB)' \
67			'XREQ=$(XREQ)' 'XLIBS=@TCL_LIBS@ @LIBS@'
68
69			MAKE_MODULES = $(MAKE) 'CC=$(SHLIB_CC)' 'LD=$(SHLIB_LD)' \
70	guppy	1.21	'STRIP=$(SHLIB_STRIP)' 'CFLAGS=$(CFLAGS)' 'CPPFLAGS=$(CPPFLAGS)'
71	arthur2	1.17
72			MAKE_SDEBUG = $(MAKE) 'CC=$(CC)' 'LD=$(LD)' 'STRIP=touch' \
73			'RANLIB=$(RANLIB)' 'CFLAGS=-g3 $(CFLAGS) -DSTATIC -DEBUG_MEM' \
74	guppy	1.21	'CPPFLAGS=$(CPPFLAGS)' 'EGGEXEC=$(EGGEXEC)' 'TCLLIB=$(TCLLIB)' \
75	arthur2	1.17	'XREQ=$(XREQ)' 'XLIBS=@TCL_LIBS@ @LIBS@'
76
77			MAKE_MEMEGG = $(MAKE) 'CC=$(MOD_CC)' 'LD=$(MOD_LD)' 'STRIP=touch' \
78			'RANLIB=$(RANLIB)' 'CFLAGS=-g3 $(CFLAGS) -DEBUG_MEM' \
79	guppy	1.21	'CPPFLAGS=$(CPPFLAGS)' 'EGGEXEC=$(EGGEXEC)' 'TCLLIB=$(TCLLIB)' \
80	arthur2	1.17	'XREQ=$(XREQ)' 'XLIBS=@TCL_LIBS@ @LIBS@'
81
82			MAKE_DEBMODULES = $(MAKE) 'CC=$(SHLIB_CC)' 'LD=$(SHLIB_LD)' \
83	guppy	1.21	'STRIP=touch' 'CFLAGS=-g3 $(CFLAGS) -DEBUG_MEM' 'CPPFLAGS=$(CPPFLAGS)'
84	arthur2	1.17
85	guppy	1.19	MAKE_INSTALL = $(MAKE) 'DEST=$(DEST)'
86	arthur2	1.17
87			all: @DEFAULT_MAKE@
88
89			clean:
90			@rm -f $(EGGEXEC) .so .stamp core DEBUG *~
91	guppy	1.22	@cd doc; $(MAKE) clean
92	guppy	1.23	@cd scripts; $(MAKE) clean
93	arthur2	1.17	@cd src; $(MAKE) clean
94			@cd src/md5; $(MAKE) clean
95			@cd src/mod; $(MAKE) clean
96	segfault	1.1
97	guppy	1.12	distclean: clean
98	guppy	1.20	@rm -f Makefile doc/Makefile scripts/Makefile src/Makefile src/md5/Makefile src/mod/Makefile
99	guppy	1.19	@rm -f config.cache config.log config.status config.h lush.h
100	arthur2	1.17
101	guppy	1.22	distrib: distclean
102	guppy	1.12	@rm -f `find . \( -name '~' -o -name '#' -o -name '*.orig' \
103			-o -name '.rej' -o -name '.bak' \) -print`
104			@rm -rf `find . \( -name "CVS" \) -print`
105			@(echo "all:"; \
106	arthur2	1.18	echo " @echo \"\""; \
107	guppy	1.12	echo " @echo \"Before you can compile your bot you have to configure it.\""; \
108			echo " @echo \"So please start the configure script now:\""; \
109			echo " @echo \"\""; \
110			echo " @echo \" % ./configure\""; \
111			echo " @echo \"\""; ) > Makefile
112	segfault	1.1
113			eggdrop: modegg modules
114
115	arthur2	1.17	modegg: modtest
116			@cd src; $(MAKE_MODEGG) modegg
117			@echo ""
118			@./$(EGGEXEC) -v
119			@ls -l $(EGGEXEC)
120	segfault	1.1
121	arthur2	1.17	modules: modtest
122			@cd src/mod; $(MAKE_MODULES) modules
123			@echo ""
124			@echo "modules made:"
125			@ls -l *.so
126	segfault	1.1
127			static: eggtest
128			@echo ""
129			@echo "Making module objects for static linking..."
130			@echo ""
131	arthur2	1.17	@cd src/mod; $(MAKE_STATIC) static
132	segfault	1.1	@echo ""
133			@echo "Making core eggdrop for static linking..."
134			@echo ""
135	arthur2	1.17	@cd src; $(MAKE_STATIC) static
136	arthur2	1.18	@echo ""
137	arthur2	1.17	@./$(EGGEXEC) -v
138			@ls -l $(EGGEXEC)
139
140			debugmem: memegg debmodules
141	segfault	1.1
142	arthur2	1.17	memegg: modtest
143			@cd src; $(MAKE_MEMEGG) memegg
144			@echo ""
145			@./$(EGGEXEC) -v
146			@ls -l $(EGGEXEC)
147	segfault	1.1
148	arthur2	1.17	debmodules: modtest
149			@cd src/mod; $(MAKE_DEBMODULES) modules
150			@echo ""
151	segfault	1.1	@echo "modules made:"
152	arthur2	1.17	@ls -l *.so
153	segfault	1.1
154	arthur2	1.17	sdebug: eggtest
155			@echo ""
156			@echo "Making module objects for static linking..."
157			@echo ""
158			@cd src/mod; $(MAKE_SDEBUG) static
159			@echo ""
160			@echo "Making core eggdrop for static linking..."
161			@echo ""
162			@cd src; $(MAKE_SDEBUG) sdebug
163	arthur2	1.18	@echo ""
164	arthur2	1.17	@./$(EGGEXEC) -v
165			@ls -l $(EGGEXEC)
166	segfault	1.1
167			eggtest:
168			@if [ -f EGGMOD.stamp ]; then \
169	arthur2	1.17	echo "You're trying to do a STATIC build of eggdrop when you've";\
170			echo "already run 'make' for a module build.";\
171			echo "You must first type \"make clean\" before you can build";\
172			echo "a static version.";\
173	segfault	1.1	exit 1;\
174			fi
175	arthur2	1.17	@echo "stamp" >EGGDROP.stamp
176	segfault	1.1
177			modtest:
178			@if [ -f EGGDROP.stamp ]; then \
179	arthur2	1.17	echo "You're trying to do a MODULE build of eggdrop when you've";\
180			echo "already run 'make' for a static build.";\
181			echo "You must first type \"make clean\" before you can build";\
182			echo "a module version.";\
183	segfault	1.1	exit 1;\
184			fi
185	arthur2	1.17	@echo "stamp" >EGGMOD.stamp
186	segfault	1.1
187	guppy	1.20	install: ainstall
188	segfault	1.1
189			dinstall: eggdrop ainstall
190
191			sinstall: static ainstall
192
193	arthur2	1.17	ainstall: install-start install-bin install-modules install-data \
194	guppy	1.21	install-help install-language install-filesys install-doc \
195			install-scripts install-end
196	arthur2	1.17
197			install-start:
198	guppy	1.20	@if test ! -f $(EGGEXEC); then \
199	guppy	1.21	echo ""; \
200	guppy	1.20	echo "You haven't compiled eggdrop yet."; \
201	guppy	1.21	echo "To compile eggdrop use:"; \
202			echo " make <target>"; \
203			echo ""; \
204			echo " valid targets: eggdrop static debug sdebug"; \
205			echo ""; \
206	guppy	1.20	exit 1; \
207			fi
208	arthur2	1.17	@if test "x$(DEST)" = "x"; then \
209	segfault	1.1	echo "You must specify a destination directory with DEST="; \
210			exit 1; \
211			fi
212	arthur2	1.18	@echo ""
213	arthur2	1.17	@./$(EGGEXEC) -v
214	segfault	1.1	@echo
215	arthur2	1.17	@echo "Installing in directory: '$(DEST)'."
216	segfault	1.1	@echo
217			@if test ! -d $(DEST); then \
218	arthur2	1.17	echo "Creating directory: $(DEST)."; \
219			$(INSTALL) -d $(DEST); \
220	segfault	1.1	fi
221	arthur2	1.17
222			install-bin:
223			@if test -f $(DEST)/$(EGGEXEC); then \
224			rm -f $(DEST)/o$(EGGEXEC); \
225	segfault	1.1	fi
226	arthur2	1.17	@if test -h $(DEST)/$(EGGEXEC); then \
227			echo "Removing symlink to archival eggdrop binary."; \
228			rm -f $(DEST)/$(EGGEXEC); \
229	guppy	1.12	fi
230	arthur2	1.17	@if test -f $(DEST)/$(EGGEXEC); then \
231			echo "Renamed the old '$(EGGEXEC)' executable to 'o$(EGGEXEC)'."; \
232			mv -f $(DEST)/$(EGGEXEC) $(DEST)/o$(EGGEXEC); \
233	guppy	1.8	fi
234	arthur2	1.17	@echo "Copying new '$(EGGEXEC)' executable and creating symlink."
235	guppy	1.20	@$(INSTALL_PROGRAM) $(EGGEXEC) $(DEST)/$(EGGEXEC)-$(EGGVERSION)
236			@(cd $(DEST) && $(LN_S) $(EGGEXEC)-$(EGGVERSION) $(EGGEXEC))
237	arthur2	1.17
238			install-modules:
239	segfault	1.1	@if test -h $(DEST)/modules; then \
240	arthur2	1.17	echo "Removing symlink to archival modules directory."; \
241	segfault	1.1	rm -f $(DEST)/modules; \
242			fi
243	arthur2	1.17	@if test -d $(DEST)/modules; then \
244			echo "Moving old modules into 'modules.old' directory."; \
245	segfault	1.1	rm -rf $(DEST)/modules.old; \
246			mv -f $(DEST)/modules $(DEST)/modules.old; \
247			fi
248	arthur2	1.17	@if test ! "x`echo .so`" = "x.so"; then \
249	guppy	1.20	if test ! -d $(DEST)/modules-$(EGGVERSION); then \
250			echo "Creating modules-$(EGGVERSION) directory and symlink."; \
251			$(INSTALL) -d $(DEST)/modules-$(EGGVERSION); \
252	arthur2	1.17	fi; \
253	guppy	1.20	(cd $(DEST) && $(LN_S) modules-$(EGGVERSION) modules); \
254	arthur2	1.17	echo "Copying new modules."; \
255			for i in *.so; do \
256	guppy	1.20	$(INSTALL_PROGRAM) $$i $(DEST)/modules-$(EGGVERSION)/; \
257	arthur2	1.17	done; \
258	segfault	1.1	fi
259	arthur2	1.17
260			install-data:
261			@$(INSTALL_DATA) eggdrop.conf.dist $(DEST)
262			@if test ! -f $(DEST)/motd; then \
263			$(INSTALL_DATA) motd $(DEST); \
264			fi
265			@if test ! -f $(DEST)/telnet-banner; then \
266			$(INSTALL_DATA) telnet-banner $(DEST); \
267			fi
268
269			install-help:
270	guppy	1.19	@echo "Copying help files."
271	arthur2	1.17	@if test ! "x`echo help/.help`" = "xhelp/.help"; then \
272			if test ! -d $(DEST)/help; then \
273			echo "Creating 'help' subdirectory."; \
274			$(INSTALL) -d $(DEST)/help; \
275			fi; \
276			for i in help/*.help; do \
277			$(INSTALL_DATA) $$i $(DEST)/help/; \
278			done; \
279			fi
280			@if test ! "x`echo help/msg/.help`" = "xhelp/msg/.help"; then \
281			if test ! -d $(DEST)/help/msg; then \
282			echo "Creating 'help/msg' subdirectory."; \
283			$(INSTALL) -d $(DEST)/help/msg; \
284			fi; \
285			for i in help/msg/*.help; do \
286			$(INSTALL_DATA) $$i $(DEST)/help/msg/; \
287			done; \
288			fi
289			@if test ! "x`echo help/set/.help`" = "xhelp/set/.help"; then \
290			if test ! -d $(DEST)/help/set; then \
291			echo "Creating 'help/set' subdirectory."; \
292			$(INSTALL) -d $(DEST)/help/set; \
293			fi; \
294			for i in help/set/*.help; do \
295			$(INSTALL_DATA) $$i $(DEST)/help/set/; \
296			done; \
297			fi
298			@cd src/mod/; $(MAKE_INSTALL) install-help
299	guppy	1.19
300			install-language:
301			@echo "Copying language files."
302			@if test ! "x`echo language/.lang`" = "xlanguage/.lang"; then \
303			if test ! -d $(DEST)/language; then \
304			echo "Creating 'language' subdirectory."; \
305			$(INSTALL) -d $(DEST)/language; \
306			fi; \
307			for i in language/*.lang; do \
308			$(INSTALL_DATA) $$i $(DEST)/language/; \
309			done; \
310			fi
311			@cd src/mod/; $(MAKE_INSTALL) install-language
312	arthur2	1.17
313			install-filesys:
314	segfault	1.1	@if test ! -d $(DEST)/filesys; then \
315	arthur2	1.17	echo "Creating a skeletal filesys subdirectory."; \
316			$(INSTALL) -d $(DEST)/filesys; \
317			$(INSTALL) -d $(DEST)/filesys/incoming; \
318	segfault	1.1	fi
319	arthur2	1.17
320			install-doc:
321	guppy	1.21	@$(INSTALL_DATA) README $(DEST)
322	arthur2	1.17	@cd doc/; $(MAKE_INSTALL) install
323
324			install-scripts:
325			@cd scripts/; $(MAKE_INSTALL) install
326
327			install-end:
328	segfault	1.1	@echo
329	arthur2	1.17	@echo "Installation completed."
330	arthur2	1.18	@echo ""
331	arthur2	1.17	@echo "You MUST ensure that you edit/verify your configuration file."
332			@echo "'eggdrop.conf.dist' lists current options."
333	arthur2	1.18	@echo ""
334	arthur2	1.17	@echo "Remember to change directory to $(DEST) before you proceed."
335	arthur2	1.18	@echo ""
336	segfault	1.1
337			#safety hash
webmaster@eggheads.org	ViewVC Help
Powered by ViewVC 1.1.23